/**
|
******************************************************************************
|
* @file stm32l4xx_ll_system.h
|
* @author MCD Application Team
|
* @brief Header file of SYSTEM LL module.
|
*
|
******************************************************************************
|
* @attention
|
*
|
* Copyright (c) 2017 STMicroelectronics.
|
* All rights reserved.
|
*
|
* This software is licensed under terms that can be found in the LICENSE file
|
* in the root directory of this software component.
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
*
|
******************************************************************************
|
@verbatim
|
==============================================================================
|
##### How to use this driver #####
|
==============================================================================
|
[..]
|
The LL SYSTEM driver contains a set of generic APIs that can be
|
used by user:
|
(+) Some of the FLASH features need to be handled in the SYSTEM file.
|
(+) Access to DBGCMU registers
|
(+) Access to SYSCFG registers
|
(+) Access to VREFBUF registers
|
|
@endverbatim
|
******************************************************************************
|
*/
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
#ifndef STM32L4xx_LL_SYSTEM_H
|
#define STM32L4xx_LL_SYSTEM_H
|
|
#ifdef __cplusplus
|
extern "C" {
|
#endif
|
|
/* Includes ------------------------------------------------------------------*/
|
#include "stm32l4xx.h"
|
|
/** @addtogroup STM32L4xx_LL_Driver
|
* @{
|
*/
|
|
#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) || defined (VREFBUF)
|
|
/** @defgroup SYSTEM_LL SYSTEM
|
* @{
|
*/
|
|
/* Private types -------------------------------------------------------------*/
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
|
* @{
|
*/
|
|
#define LL_EXTI_REGISTER_PINPOS_SHFT 16U /*!< Define used to shift pin position in EXTICR register */
|
|
/**
|
* @brief Power-down in Run mode Flash key
|
*/
|
#define FLASH_PDKEY1 0x04152637U /*!< Flash power down key1 */
|
#define FLASH_PDKEY2 0xFAFBFCFDU /*!< Flash power down key2: used with FLASH_PDKEY1
|
to unlock the RUN_PD bit in FLASH_ACR */
|
|
/**
|
* @}
|
*/
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/* Exported types ------------------------------------------------------------*/
|
/* Exported constants --------------------------------------------------------*/
|
/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
|
* @{
|
*/
|
|
/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
|
* @{
|
*/
|
#define LL_SYSCFG_REMAP_FLASH 0x00000000U /*!< Main Flash memory mapped at 0x00000000 */
|
#define LL_SYSCFG_REMAP_SYSTEMFLASH SYSCFG_MEMRMP_MEM_MODE_0 /*!< System Flash memory mapped at 0x00000000 */
|
#define LL_SYSCFG_REMAP_SRAM (SYSCFG_MEMRMP_MEM_MODE_1 | SYSCFG_MEMRMP_MEM_MODE_0) /*!< SRAM1 mapped at 0x00000000 */
|
#if defined(FMC_Bank1_R)
|
#define LL_SYSCFG_REMAP_FMC SYSCFG_MEMRMP_MEM_MODE_1 /*!< FMC bank 1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 */
|
#endif /* FMC_Bank1_R */
|
#define LL_SYSCFG_REMAP_QUADSPI (SYSCFG_MEMRMP_MEM_MODE_2 | SYSCFG_MEMRMP_MEM_MODE_1) /*!< QUADSPI memory mapped at 0x00000000 */
|
/**
|
* @}
|
*/
|
|
#if defined(SYSCFG_MEMRMP_FB_MODE)
|
/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE
|
* @{
|
*/
|
#define LL_SYSCFG_BANKMODE_BANK1 0x00000000U /*!< Flash Bank1 mapped at 0x08000000 (and aliased @0x00000000)
|
and Flash Bank2 mapped at 0x08080000 (and aliased at 0x00080000) */
|
#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_FB_MODE /*!< Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
|
and Flash Bank1 mapped at 0x08080000 (and aliased at 0x00080000) */
|
/**
|
* @}
|
*/
|
|
#endif /* SYSCFG_MEMRMP_FB_MODE */
|
/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS
|
* @{
|
*/
|
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
|
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
|
#if defined(SYSCFG_CFGR1_I2C_PB8_FMP)
|
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
|
#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */
|
#if defined(SYSCFG_CFGR1_I2C_PB9_FMP)
|
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
|
#endif /* SYSCFG_CFGR1_I2C_PB9_FMP */
|
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
|
#if defined(I2C2)
|
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
|
#endif /* I2C2 */
|
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
|
#if defined(I2C4)
|
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 SYSCFG_CFGR1_I2C4_FMP /*!< Enable Fast Mode Plus on I2C4 pins */
|
#endif /* I2C4 */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT
|
* @{
|
*/
|
#define LL_SYSCFG_EXTI_PORTA 0U /*!< EXTI PORT A */
|
#define LL_SYSCFG_EXTI_PORTB 1U /*!< EXTI PORT B */
|
#define LL_SYSCFG_EXTI_PORTC 2U /*!< EXTI PORT C */
|
#define LL_SYSCFG_EXTI_PORTD 3U /*!< EXTI PORT D */
|
#define LL_SYSCFG_EXTI_PORTE 4U /*!< EXTI PORT E */
|
#if defined(GPIOF)
|
#define LL_SYSCFG_EXTI_PORTF 5U /*!< EXTI PORT F */
|
#endif /* GPIOF */
|
#if defined(GPIOG)
|
#define LL_SYSCFG_EXTI_PORTG 6U /*!< EXTI PORT G */
|
#endif /* GPIOG */
|
#define LL_SYSCFG_EXTI_PORTH 7U /*!< EXTI PORT H */
|
#if defined(GPIOI)
|
#define LL_SYSCFG_EXTI_PORTI 8U /*!< EXTI PORT I */
|
#endif /* GPIOI */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE
|
* @{
|
*/
|
#define LL_SYSCFG_EXTI_LINE0 (uint32_t)((0x000FU << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /* !< EXTI_POSITION_0 | EXTICR[0] */
|
#define LL_SYSCFG_EXTI_LINE1 (uint32_t)((0x00F0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /* !< EXTI_POSITION_4 | EXTICR[0] */
|
#define LL_SYSCFG_EXTI_LINE2 (uint32_t)((0x0F00U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /* !< EXTI_POSITION_8 | EXTICR[0] */
|
#define LL_SYSCFG_EXTI_LINE3 (uint32_t)((0xF000U << LL_EXTI_REGISTER_PINPOS_SHFT) | 0U) /* !< EXTI_POSITION_12 | EXTICR[0] */
|
#define LL_SYSCFG_EXTI_LINE4 (uint32_t)((0x000FU << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /* !< EXTI_POSITION_0 | EXTICR[1] */
|
#define LL_SYSCFG_EXTI_LINE5 (uint32_t)((0x00F0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /* !< EXTI_POSITION_4 | EXTICR[1] */
|
#define LL_SYSCFG_EXTI_LINE6 (uint32_t)((0x0F00U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /* !< EXTI_POSITION_8 | EXTICR[1] */
|
#define LL_SYSCFG_EXTI_LINE7 (uint32_t)((0xF000U << LL_EXTI_REGISTER_PINPOS_SHFT) | 1U) /* !< EXTI_POSITION_12 | EXTICR[1] */
|
#define LL_SYSCFG_EXTI_LINE8 (uint32_t)((0x000FU << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /* !< EXTI_POSITION_0 | EXTICR[2] */
|
#define LL_SYSCFG_EXTI_LINE9 (uint32_t)((0x00F0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /* !< EXTI_POSITION_4 | EXTICR[2] */
|
#define LL_SYSCFG_EXTI_LINE10 (uint32_t)((0x0F00U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /* !< EXTI_POSITION_8 | EXTICR[2] */
|
#define LL_SYSCFG_EXTI_LINE11 (uint32_t)((0xF000U << LL_EXTI_REGISTER_PINPOS_SHFT) | 2U) /* !< EXTI_POSITION_12 | EXTICR[2] */
|
#define LL_SYSCFG_EXTI_LINE12 (uint32_t)((0x000FU << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /* !< EXTI_POSITION_0 | EXTICR[3] */
|
#define LL_SYSCFG_EXTI_LINE13 (uint32_t)((0x00F0U << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /* !< EXTI_POSITION_4 | EXTICR[3] */
|
#define LL_SYSCFG_EXTI_LINE14 (uint32_t)((0x0F00U << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /* !< EXTI_POSITION_8 | EXTICR[3] */
|
#define LL_SYSCFG_EXTI_LINE15 (uint32_t)((0xF000U << LL_EXTI_REGISTER_PINPOS_SHFT) | 3U) /* !< EXTI_POSITION_12 | EXTICR[3] */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK
|
* @{
|
*/
|
#define LL_SYSCFG_TIMBREAK_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal
|
with Break Input of TIM1/8/15/16/17 */
|
#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection
|
with TIM1/8/15/16/17 Break Input
|
and also the PVDE and PLS bits of the Power Control Interface */
|
#define LL_SYSCFG_TIMBREAK_SRAM2_PARITY SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM2_PARITY error signal
|
with Break Input of TIM1/8/15/16/17 */
|
#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4
|
with Break Input of TIM1/15/16/17 */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SYSTEM_LL_EC_SRAM2WRP SYSCFG SRAM2 WRP
|
* @{
|
*/
|
#define LL_SYSCFG_SRAM2WRP_PAGE0 SYSCFG_SWPR_PAGE0 /*!< SRAM2 Write protection page 0 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE1 SYSCFG_SWPR_PAGE1 /*!< SRAM2 Write protection page 1 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE2 SYSCFG_SWPR_PAGE2 /*!< SRAM2 Write protection page 2 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE3 SYSCFG_SWPR_PAGE3 /*!< SRAM2 Write protection page 3 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE4 SYSCFG_SWPR_PAGE4 /*!< SRAM2 Write protection page 4 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE5 SYSCFG_SWPR_PAGE5 /*!< SRAM2 Write protection page 5 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE6 SYSCFG_SWPR_PAGE6 /*!< SRAM2 Write protection page 6 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE7 SYSCFG_SWPR_PAGE7 /*!< SRAM2 Write protection page 7 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE8 SYSCFG_SWPR_PAGE8 /*!< SRAM2 Write protection page 8 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE9 SYSCFG_SWPR_PAGE9 /*!< SRAM2 Write protection page 9 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE10 SYSCFG_SWPR_PAGE10 /*!< SRAM2 Write protection page 10 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE11 SYSCFG_SWPR_PAGE11 /*!< SRAM2 Write protection page 11 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE12 SYSCFG_SWPR_PAGE12 /*!< SRAM2 Write protection page 12 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE13 SYSCFG_SWPR_PAGE13 /*!< SRAM2 Write protection page 13 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE14 SYSCFG_SWPR_PAGE14 /*!< SRAM2 Write protection page 14 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE15 SYSCFG_SWPR_PAGE15 /*!< SRAM2 Write protection page 15 */
|
#if defined(SYSCFG_SWPR_PAGE31)
|
#define LL_SYSCFG_SRAM2WRP_PAGE16 SYSCFG_SWPR_PAGE16 /*!< SRAM2 Write protection page 16 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE17 SYSCFG_SWPR_PAGE17 /*!< SRAM2 Write protection page 17 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE18 SYSCFG_SWPR_PAGE18 /*!< SRAM2 Write protection page 18 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE19 SYSCFG_SWPR_PAGE19 /*!< SRAM2 Write protection page 19 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE20 SYSCFG_SWPR_PAGE20 /*!< SRAM2 Write protection page 20 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE21 SYSCFG_SWPR_PAGE21 /*!< SRAM2 Write protection page 21 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE22 SYSCFG_SWPR_PAGE22 /*!< SRAM2 Write protection page 22 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE23 SYSCFG_SWPR_PAGE23 /*!< SRAM2 Write protection page 23 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE24 SYSCFG_SWPR_PAGE24 /*!< SRAM2 Write protection page 24 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE25 SYSCFG_SWPR_PAGE25 /*!< SRAM2 Write protection page 25 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE26 SYSCFG_SWPR_PAGE26 /*!< SRAM2 Write protection page 26 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE27 SYSCFG_SWPR_PAGE27 /*!< SRAM2 Write protection page 27 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE28 SYSCFG_SWPR_PAGE28 /*!< SRAM2 Write protection page 28 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE29 SYSCFG_SWPR_PAGE29 /*!< SRAM2 Write protection page 29 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE30 SYSCFG_SWPR_PAGE30 /*!< SRAM2 Write protection page 30 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE31 SYSCFG_SWPR_PAGE31 /*!< SRAM2 Write protection page 31 */
|
#endif /* SYSCFG_SWPR_PAGE31 */
|
#if defined(SYSCFG_SWPR2_PAGE63)
|
#define LL_SYSCFG_SRAM2WRP_PAGE32 SYSCFG_SWPR2_PAGE32 /*!< SRAM2 Write protection page 32 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE33 SYSCFG_SWPR2_PAGE33 /*!< SRAM2 Write protection page 33 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE34 SYSCFG_SWPR2_PAGE34 /*!< SRAM2 Write protection page 34 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE35 SYSCFG_SWPR2_PAGE35 /*!< SRAM2 Write protection page 35 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE36 SYSCFG_SWPR2_PAGE36 /*!< SRAM2 Write protection page 36 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE37 SYSCFG_SWPR2_PAGE37 /*!< SRAM2 Write protection page 37 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE38 SYSCFG_SWPR2_PAGE38 /*!< SRAM2 Write protection page 38 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE39 SYSCFG_SWPR2_PAGE39 /*!< SRAM2 Write protection page 39 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE40 SYSCFG_SWPR2_PAGE40 /*!< SRAM2 Write protection page 40 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE41 SYSCFG_SWPR2_PAGE41 /*!< SRAM2 Write protection page 41 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE42 SYSCFG_SWPR2_PAGE42 /*!< SRAM2 Write protection page 42 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE43 SYSCFG_SWPR2_PAGE43 /*!< SRAM2 Write protection page 43 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE44 SYSCFG_SWPR2_PAGE44 /*!< SRAM2 Write protection page 44 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE45 SYSCFG_SWPR2_PAGE45 /*!< SRAM2 Write protection page 45 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE46 SYSCFG_SWPR2_PAGE46 /*!< SRAM2 Write protection page 46 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE47 SYSCFG_SWPR2_PAGE47 /*!< SRAM2 Write protection page 47 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE48 SYSCFG_SWPR2_PAGE48 /*!< SRAM2 Write protection page 48 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE49 SYSCFG_SWPR2_PAGE49 /*!< SRAM2 Write protection page 49 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE50 SYSCFG_SWPR2_PAGE50 /*!< SRAM2 Write protection page 50 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE51 SYSCFG_SWPR2_PAGE51 /*!< SRAM2 Write protection page 51 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE52 SYSCFG_SWPR2_PAGE52 /*!< SRAM2 Write protection page 52 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE53 SYSCFG_SWPR2_PAGE53 /*!< SRAM2 Write protection page 53 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE54 SYSCFG_SWPR2_PAGE54 /*!< SRAM2 Write protection page 54 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE55 SYSCFG_SWPR2_PAGE55 /*!< SRAM2 Write protection page 55 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE56 SYSCFG_SWPR2_PAGE56 /*!< SRAM2 Write protection page 56 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE57 SYSCFG_SWPR2_PAGE57 /*!< SRAM2 Write protection page 57 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE58 SYSCFG_SWPR2_PAGE58 /*!< SRAM2 Write protection page 58 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE59 SYSCFG_SWPR2_PAGE59 /*!< SRAM2 Write protection page 59 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE60 SYSCFG_SWPR2_PAGE60 /*!< SRAM2 Write protection page 60 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE61 SYSCFG_SWPR2_PAGE61 /*!< SRAM2 Write protection page 61 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE62 SYSCFG_SWPR2_PAGE62 /*!< SRAM2 Write protection page 62 */
|
#define LL_SYSCFG_SRAM2WRP_PAGE63 SYSCFG_SWPR2_PAGE63 /*!< SRAM2 Write protection page 63 */
|
#endif /* SYSCFG_SWPR2_PAGE63 */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment
|
* @{
|
*/
|
#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */
|
#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */
|
#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */
|
#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */
|
#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
|
* @{
|
*/
|
#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1FZR1_DBG_TIM2_STOP /*!< The counter clock of TIM2 is stopped when the core is halted*/
|
#if defined(TIM3)
|
#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1FZR1_DBG_TIM3_STOP /*!< The counter clock of TIM3 is stopped when the core is halted*/
|
#endif /* TIM3 */
|
#if defined(TIM4)
|
#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1FZR1_DBG_TIM4_STOP /*!< The counter clock of TIM4 is stopped when the core is halted*/
|
#endif /* TIM4 */
|
#if defined(TIM5)
|
#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1FZR1_DBG_TIM5_STOP /*!< The counter clock of TIM5 is stopped when the core is halted*/
|
#endif /* TIM5 */
|
#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1FZR1_DBG_TIM6_STOP /*!< The counter clock of TIM6 is stopped when the core is halted*/
|
#if defined(TIM7)
|
#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1FZR1_DBG_TIM7_STOP /*!< The counter clock of TIM7 is stopped when the core is halted*/
|
#endif /* TIM7 */
|
#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1FZR1_DBG_RTC_STOP /*!< The clock of the RTC counter is stopped when the core is halted*/
|
#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1FZR1_DBG_WWDG_STOP /*!< The window watchdog counter clock is stopped when the core is halted*/
|
#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1FZR1_DBG_IWDG_STOP /*!< The independent watchdog counter clock is stopped when the core is halted*/
|
#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1FZR1_DBG_I2C1_STOP /*!< The I2C1 SMBus timeout is frozen*/
|
#if defined(I2C2)
|
#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1FZR1_DBG_I2C2_STOP /*!< The I2C2 SMBus timeout is frozen*/
|
#endif /* I2C2 */
|
#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1FZR1_DBG_I2C3_STOP /*!< The I2C3 SMBus timeout is frozen*/
|
#define LL_DBGMCU_APB1_GRP1_CAN_STOP DBGMCU_APB1FZR1_DBG_CAN_STOP /*!< The bxCAN receive registers are frozen*/
|
#if defined(CAN2)
|
#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_APB1FZR1_DBG_CAN2_STOP /*!< The bxCAN2 receive registers are frozen*/
|
#endif /* CAN2 */
|
#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_APB1FZR1_DBG_LPTIM1_STOP /*!< The counter clock of LPTIM1 is stopped when the core is halted*/
|
/**
|
* @}
|
*/
|
|
/** @defgroup SYSTEM_LL_EC_APB1_GRP2_STOP_IP DBGMCU APB1 GRP2 STOP IP
|
* @{
|
*/
|
#if defined(I2C4)
|
#define LL_DBGMCU_APB1_GRP2_I2C4_STOP DBGMCU_APB1FZR2_DBG_I2C4_STOP /*!< The I2C4 SMBus timeout is frozen*/
|
#endif /* I2C4 */
|
#define LL_DBGMCU_APB1_GRP2_LPTIM2_STOP DBGMCU_APB1FZR2_DBG_LPTIM2_STOP /*!< The counter clock of LPTIM2 is stopped when the core is halted*/
|
/**
|
* @}
|
*/
|
|
/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP
|
* @{
|
*/
|
#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2FZ_DBG_TIM1_STOP /*!< The counter clock of TIM1 is stopped when the core is halted*/
|
#if defined(TIM8)
|
#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2FZ_DBG_TIM8_STOP /*!< The counter clock of TIM8 is stopped when the core is halted*/
|
#endif /* TIM8 */
|
#define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBGMCU_APB2FZ_DBG_TIM15_STOP /*!< The counter clock of TIM15 is stopped when the core is halted*/
|
#define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBGMCU_APB2FZ_DBG_TIM16_STOP /*!< The counter clock of TIM16 is stopped when the core is halted*/
|
#if defined(TIM17)
|
#define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBGMCU_APB2FZ_DBG_TIM17_STOP /*!< The counter clock of TIM17 is stopped when the core is halted*/
|
#endif /* TIM17 */
|
/**
|
* @}
|
*/
|
|
#if defined(VREFBUF)
|
/** @defgroup SYSTEM_LL_EC_VOLTAGE VREFBUF VOLTAGE
|
* @{
|
*/
|
#define LL_VREFBUF_VOLTAGE_SCALE0 ((uint32_t)0x00000000) /*!< Voltage reference scale 0 (VREF_OUT1) */
|
#define LL_VREFBUF_VOLTAGE_SCALE1 VREFBUF_CSR_VRS /*!< Voltage reference scale 1 (VREF_OUT2) */
|
/**
|
* @}
|
*/
|
#endif /* VREFBUF */
|
|
/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
|
* @{
|
*/
|
#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */
|
#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */
|
#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */
|
#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */
|
#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */
|
#if defined(FLASH_ACR_LATENCY_5WS)
|
#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */
|
#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */
|
#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */
|
#define LL_FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH eight wait states */
|
#define LL_FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH nine wait states */
|
#define LL_FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH ten wait states */
|
#define LL_FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH eleven wait states */
|
#define LL_FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH twelve wait states */
|
#define LL_FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH thirteen wait states */
|
#define LL_FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH fourteen wait states */
|
#define LL_FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH fifteen wait states */
|
#endif
|
/**
|
* @}
|
*/
|
|
/**
|
* @}
|
*/
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/* Exported functions --------------------------------------------------------*/
|
/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
|
* @{
|
*/
|
|
/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
|
* @{
|
*/
|
|
/**
|
* @brief Set memory mapping at address 0x00000000
|
* @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_SetRemapMemory
|
* @param Memory This parameter can be one of the following values:
|
* @arg @ref LL_SYSCFG_REMAP_FLASH
|
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
|
* @arg @ref LL_SYSCFG_REMAP_SRAM
|
* @arg @ref LL_SYSCFG_REMAP_FMC (*)
|
* @arg @ref LL_SYSCFG_REMAP_QUADSPI
|
*
|
* (*) value not defined in all devices
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory)
|
{
|
MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE, Memory);
|
}
|
|
/**
|
* @brief Get memory mapping at address 0x00000000
|
* @rmtoll SYSCFG_MEMRMP MEM_MODE LL_SYSCFG_GetRemapMemory
|
* @retval Returned value can be one of the following values:
|
* @arg @ref LL_SYSCFG_REMAP_FLASH
|
* @arg @ref LL_SYSCFG_REMAP_SYSTEMFLASH
|
* @arg @ref LL_SYSCFG_REMAP_SRAM
|
* @arg @ref LL_SYSCFG_REMAP_FMC (*)
|
* @arg @ref LL_SYSCFG_REMAP_QUADSPI
|
*
|
* (*) value not defined in all devices
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void)
|
{
|
return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_MODE));
|
}
|
|
#if defined(SYSCFG_MEMRMP_FB_MODE)
|
/**
|
* @brief Select Flash bank mode (Bank flashed at 0x08000000)
|
* @rmtoll SYSCFG_MEMRMP FB_MODE LL_SYSCFG_SetFlashBankMode
|
* @param Bank This parameter can be one of the following values:
|
* @arg @ref LL_SYSCFG_BANKMODE_BANK1
|
* @arg @ref LL_SYSCFG_BANKMODE_BANK2
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank)
|
{
|
MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE, Bank);
|
}
|
|
/**
|
* @brief Get Flash bank mode (Bank flashed at 0x08000000)
|
* @rmtoll SYSCFG_MEMRMP FB_MODE LL_SYSCFG_GetFlashBankMode
|
* @retval Returned value can be one of the following values:
|
* @arg @ref LL_SYSCFG_BANKMODE_BANK1
|
* @arg @ref LL_SYSCFG_BANKMODE_BANK2
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void)
|
{
|
return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_FB_MODE));
|
}
|
#endif /* SYSCFG_MEMRMP_FB_MODE */
|
|
/**
|
* @brief Firewall protection enabled
|
* @rmtoll SYSCFG_CFGR1 FWDIS LL_SYSCFG_EnableFirewall
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableFirewall(void)
|
{
|
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FWDIS);
|
}
|
|
/**
|
* @brief Check if Firewall protection is enabled or not
|
* @rmtoll SYSCFG_CFGR1 FWDIS LL_SYSCFG_IsEnabledFirewall
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledFirewall(void)
|
{
|
return !(READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FWDIS) == SYSCFG_CFGR1_FWDIS);
|
}
|
|
/**
|
* @brief Enable I/O analog switch voltage booster.
|
* @note When voltage booster is enabled, I/O analog switches are supplied
|
* by a dedicated voltage booster, from VDD power domain. This is
|
* the recommended configuration with low VDDA voltage operation.
|
* @note The I/O analog switch voltage booster is relevant for peripherals
|
* using I/O in analog input: ADC, COMP, OPAMP.
|
* However, COMP and OPAMP inputs have a high impedance and
|
* voltage booster do not impact performance significantly.
|
* Therefore, the voltage booster is mainly intended for
|
* usage with ADC.
|
* @rmtoll SYSCFG_CFGR1 BOOSTEN LL_SYSCFG_EnableAnalogBooster
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableAnalogBooster(void)
|
{
|
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN);
|
}
|
|
/**
|
* @brief Disable I/O analog switch voltage booster.
|
* @note When voltage booster is enabled, I/O analog switches are supplied
|
* by a dedicated voltage booster, from VDD power domain. This is
|
* the recommended configuration with low VDDA voltage operation.
|
* @note The I/O analog switch voltage booster is relevant for peripherals
|
* using I/O in analog input: ADC, COMP, OPAMP.
|
* However, COMP and OPAMP inputs have a high impedance and
|
* voltage booster do not impact performance significantly.
|
* Therefore, the voltage booster is mainly intended for
|
* usage with ADC.
|
* @rmtoll SYSCFG_CFGR1 BOOSTEN LL_SYSCFG_DisableAnalogBooster
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_DisableAnalogBooster(void)
|
{
|
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOSTEN);
|
}
|
|
/**
|
* @brief Enable the I2C fast mode plus driving capability.
|
* @rmtoll SYSCFG_CFGR1 I2C_PBx_FMP LL_SYSCFG_EnableFastModePlus\n
|
* SYSCFG_CFGR1 I2Cx_FMP LL_SYSCFG_EnableFastModePlus
|
* @param ConfigFastModePlus This parameter can be a combination of the following values:
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*)
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*)
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 (*)
|
*
|
* (*) value not defined in all devices
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus)
|
{
|
SET_BIT(SYSCFG->CFGR1, ConfigFastModePlus);
|
}
|
|
/**
|
* @brief Disable the I2C fast mode plus driving capability.
|
* @rmtoll SYSCFG_CFGR1 I2C_PBx_FMP LL_SYSCFG_DisableFastModePlus\n
|
* SYSCFG_CFGR1 I2Cx_FMP LL_SYSCFG_DisableFastModePlus
|
* @param ConfigFastModePlus This parameter can be a combination of the following values:
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*)
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*)
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3
|
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 (*)
|
*
|
* (*) value not defined in all devices
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus)
|
{
|
CLEAR_BIT(SYSCFG->CFGR1, ConfigFastModePlus);
|
}
|
|
/**
|
* @brief Enable Floating Point Unit Invalid operation Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_EnableIT_FPU_IOC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IOC(void)
|
{
|
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0);
|
}
|
|
/**
|
* @brief Enable Floating Point Unit Divide-by-zero Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_EnableIT_FPU_DZC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_DZC(void)
|
{
|
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1);
|
}
|
|
/**
|
* @brief Enable Floating Point Unit Underflow Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_EnableIT_FPU_UFC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_UFC(void)
|
{
|
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2);
|
}
|
|
/**
|
* @brief Enable Floating Point Unit Overflow Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_EnableIT_FPU_OFC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_OFC(void)
|
{
|
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3);
|
}
|
|
/**
|
* @brief Enable Floating Point Unit Input denormal Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_EnableIT_FPU_IDC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IDC(void)
|
{
|
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4);
|
}
|
|
/**
|
* @brief Enable Floating Point Unit Inexact Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_EnableIT_FPU_IXC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableIT_FPU_IXC(void)
|
{
|
SET_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5);
|
}
|
|
/**
|
* @brief Disable Floating Point Unit Invalid operation Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_DisableIT_FPU_IOC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IOC(void)
|
{
|
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0);
|
}
|
|
/**
|
* @brief Disable Floating Point Unit Divide-by-zero Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_DisableIT_FPU_DZC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_DZC(void)
|
{
|
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1);
|
}
|
|
/**
|
* @brief Disable Floating Point Unit Underflow Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_DisableIT_FPU_UFC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_UFC(void)
|
{
|
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2);
|
}
|
|
/**
|
* @brief Disable Floating Point Unit Overflow Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_DisableIT_FPU_OFC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_OFC(void)
|
{
|
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3);
|
}
|
|
/**
|
* @brief Disable Floating Point Unit Input denormal Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_DisableIT_FPU_IDC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IDC(void)
|
{
|
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4);
|
}
|
|
/**
|
* @brief Disable Floating Point Unit Inexact Interrupt
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_DisableIT_FPU_IXC
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_DisableIT_FPU_IXC(void)
|
{
|
CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5);
|
}
|
|
/**
|
* @brief Check if Floating Point Unit Invalid operation Interrupt source is enabled or disabled.
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_0 LL_SYSCFG_IsEnabledIT_FPU_IOC
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IOC(void)
|
{
|
return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_0) == (SYSCFG_CFGR1_FPU_IE_0));
|
}
|
|
/**
|
* @brief Check if Floating Point Unit Divide-by-zero Interrupt source is enabled or disabled.
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_1 LL_SYSCFG_IsEnabledIT_FPU_DZC
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_DZC(void)
|
{
|
return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_1) == (SYSCFG_CFGR1_FPU_IE_1));
|
}
|
|
/**
|
* @brief Check if Floating Point Unit Underflow Interrupt source is enabled or disabled.
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_2 LL_SYSCFG_IsEnabledIT_FPU_UFC
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_UFC(void)
|
{
|
return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_2) == (SYSCFG_CFGR1_FPU_IE_2));
|
}
|
|
/**
|
* @brief Check if Floating Point Unit Overflow Interrupt source is enabled or disabled.
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_3 LL_SYSCFG_IsEnabledIT_FPU_OFC
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_OFC(void)
|
{
|
return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_3) == (SYSCFG_CFGR1_FPU_IE_3));
|
}
|
|
/**
|
* @brief Check if Floating Point Unit Input denormal Interrupt source is enabled or disabled.
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_4 LL_SYSCFG_IsEnabledIT_FPU_IDC
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IDC(void)
|
{
|
return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_4) == (SYSCFG_CFGR1_FPU_IE_4));
|
}
|
|
/**
|
* @brief Check if Floating Point Unit Inexact Interrupt source is enabled or disabled.
|
* @rmtoll SYSCFG_CFGR1 FPU_IE_5 LL_SYSCFG_IsEnabledIT_FPU_IXC
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsEnabledIT_FPU_IXC(void)
|
{
|
return (READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FPU_IE_5) == (SYSCFG_CFGR1_FPU_IE_5));
|
}
|
|
/**
|
* @brief Configure source input for the EXTI external interrupt.
|
* @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n
|
* SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n
|
* SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n
|
* SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource
|
* @param Port This parameter can be one of the following values:
|
* @arg @ref LL_SYSCFG_EXTI_PORTA
|
* @arg @ref LL_SYSCFG_EXTI_PORTB
|
* @arg @ref LL_SYSCFG_EXTI_PORTC
|
* @arg @ref LL_SYSCFG_EXTI_PORTD
|
* @arg @ref LL_SYSCFG_EXTI_PORTE
|
* @arg @ref LL_SYSCFG_EXTI_PORTF (*)
|
* @arg @ref LL_SYSCFG_EXTI_PORTG (*)
|
* @arg @ref LL_SYSCFG_EXTI_PORTH
|
* @arg @ref LL_SYSCFG_EXTI_PORTI (*)
|
*
|
* (*) value not defined in all devices
|
* @param Line This parameter can be one of the following values:
|
* @arg @ref LL_SYSCFG_EXTI_LINE0
|
* @arg @ref LL_SYSCFG_EXTI_LINE1
|
* @arg @ref LL_SYSCFG_EXTI_LINE2
|
* @arg @ref LL_SYSCFG_EXTI_LINE3
|
* @arg @ref LL_SYSCFG_EXTI_LINE4
|
* @arg @ref LL_SYSCFG_EXTI_LINE5
|
* @arg @ref LL_SYSCFG_EXTI_LINE6
|
* @arg @ref LL_SYSCFG_EXTI_LINE7
|
* @arg @ref LL_SYSCFG_EXTI_LINE8
|
* @arg @ref LL_SYSCFG_EXTI_LINE9
|
* @arg @ref LL_SYSCFG_EXTI_LINE10
|
* @arg @ref LL_SYSCFG_EXTI_LINE11
|
* @arg @ref LL_SYSCFG_EXTI_LINE12
|
* @arg @ref LL_SYSCFG_EXTI_LINE13
|
* @arg @ref LL_SYSCFG_EXTI_LINE14
|
* @arg @ref LL_SYSCFG_EXTI_LINE15
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
|
{
|
MODIFY_REG(SYSCFG->EXTICR[Line & 0x03U], (Line >> LL_EXTI_REGISTER_PINPOS_SHFT), Port << POSITION_VAL((Line >> LL_EXTI_REGISTER_PINPOS_SHFT)));
|
}
|
|
/**
|
* @brief Get the configured defined for specific EXTI Line
|
* @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n
|
* SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n
|
* SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n
|
* SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource
|
* @param Line This parameter can be one of the following values:
|
* @arg @ref LL_SYSCFG_EXTI_LINE0
|
* @arg @ref LL_SYSCFG_EXTI_LINE1
|
* @arg @ref LL_SYSCFG_EXTI_LINE2
|
* @arg @ref LL_SYSCFG_EXTI_LINE3
|
* @arg @ref LL_SYSCFG_EXTI_LINE4
|
* @arg @ref LL_SYSCFG_EXTI_LINE5
|
* @arg @ref LL_SYSCFG_EXTI_LINE6
|
* @arg @ref LL_SYSCFG_EXTI_LINE7
|
* @arg @ref LL_SYSCFG_EXTI_LINE8
|
* @arg @ref LL_SYSCFG_EXTI_LINE9
|
* @arg @ref LL_SYSCFG_EXTI_LINE10
|
* @arg @ref LL_SYSCFG_EXTI_LINE11
|
* @arg @ref LL_SYSCFG_EXTI_LINE12
|
* @arg @ref LL_SYSCFG_EXTI_LINE13
|
* @arg @ref LL_SYSCFG_EXTI_LINE14
|
* @arg @ref LL_SYSCFG_EXTI_LINE15
|
* @retval Returned value can be one of the following values:
|
* @arg @ref LL_SYSCFG_EXTI_PORTA
|
* @arg @ref LL_SYSCFG_EXTI_PORTB
|
* @arg @ref LL_SYSCFG_EXTI_PORTC
|
* @arg @ref LL_SYSCFG_EXTI_PORTD
|
* @arg @ref LL_SYSCFG_EXTI_PORTE
|
* @arg @ref LL_SYSCFG_EXTI_PORTF (*)
|
* @arg @ref LL_SYSCFG_EXTI_PORTG (*)
|
* @arg @ref LL_SYSCFG_EXTI_PORTH
|
* @arg @ref LL_SYSCFG_EXTI_PORTI (*)
|
*
|
* (*) value not defined in all devices
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
|
{
|
return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0x03U], (Line >> LL_EXTI_REGISTER_PINPOS_SHFT)) >> POSITION_VAL(Line >> LL_EXTI_REGISTER_PINPOS_SHFT));
|
}
|
|
/**
|
* @brief Enable SRAM2 Erase (starts a hardware SRAM2 erase operation. This bit is
|
* automatically cleared at the end of the SRAM2 erase operation.)
|
* @note This bit is write-protected: setting this bit is possible only after the
|
* correct key sequence is written in the SYSCFG_SKR register as described in
|
* the Reference Manual.
|
* @rmtoll SYSCFG_SCSR SRAM2ER LL_SYSCFG_EnableSRAM2Erase
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableSRAM2Erase(void)
|
{
|
/* Starts a hardware SRAM2 erase operation*/
|
SET_BIT(SYSCFG->SCSR, SYSCFG_SCSR_SRAM2ER);
|
}
|
|
/**
|
* @brief Check if SRAM2 erase operation is on going
|
* @rmtoll SYSCFG_SCSR SRAM2BSY LL_SYSCFG_IsSRAM2EraseOngoing
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsSRAM2EraseOngoing(void)
|
{
|
return (READ_BIT(SYSCFG->SCSR, SYSCFG_SCSR_SRAM2BSY) == (SYSCFG_SCSR_SRAM2BSY));
|
}
|
|
/**
|
* @brief Set connections to TIM1/8/15/16/17 Break inputs
|
* @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_SetTIMBreakInputs\n
|
* SYSCFG_CFGR2 SPL LL_SYSCFG_SetTIMBreakInputs\n
|
* SYSCFG_CFGR2 PVDL LL_SYSCFG_SetTIMBreakInputs\n
|
* SYSCFG_CFGR2 ECCL LL_SYSCFG_SetTIMBreakInputs
|
* @param Break This parameter can be a combination of the following values:
|
* @arg @ref LL_SYSCFG_TIMBREAK_ECC
|
* @arg @ref LL_SYSCFG_TIMBREAK_PVD
|
* @arg @ref LL_SYSCFG_TIMBREAK_SRAM2_PARITY
|
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break)
|
{
|
MODIFY_REG(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_PVDL | SYSCFG_CFGR2_ECCL, Break);
|
}
|
|
/**
|
* @brief Get connections to TIM1/8/15/16/17 Break inputs
|
* @rmtoll SYSCFG_CFGR2 CLL LL_SYSCFG_GetTIMBreakInputs\n
|
* SYSCFG_CFGR2 SPL LL_SYSCFG_GetTIMBreakInputs\n
|
* SYSCFG_CFGR2 PVDL LL_SYSCFG_GetTIMBreakInputs\n
|
* SYSCFG_CFGR2 ECCL LL_SYSCFG_GetTIMBreakInputs
|
* @retval Returned value can be can be a combination of the following values:
|
* @arg @ref LL_SYSCFG_TIMBREAK_ECC
|
* @arg @ref LL_SYSCFG_TIMBREAK_PVD
|
* @arg @ref LL_SYSCFG_TIMBREAK_SRAM2_PARITY
|
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void)
|
{
|
return (uint32_t)(READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_CLL | SYSCFG_CFGR2_SPL | SYSCFG_CFGR2_PVDL | SYSCFG_CFGR2_ECCL));
|
}
|
|
/**
|
* @brief Check if SRAM2 parity error detected
|
* @rmtoll SYSCFG_CFGR2 SPF LL_SYSCFG_IsActiveFlag_SP
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_SP(void)
|
{
|
return (READ_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF) == (SYSCFG_CFGR2_SPF));
|
}
|
|
/**
|
* @brief Clear SRAM2 parity error flag
|
* @rmtoll SYSCFG_CFGR2 SPF LL_SYSCFG_ClearFlag_SP
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_ClearFlag_SP(void)
|
{
|
SET_BIT(SYSCFG->CFGR2, SYSCFG_CFGR2_SPF);
|
}
|
|
/**
|
* @brief Enable SRAM2 page write protection for Pages in range 0 to 31
|
* @note Write protection is cleared only by a system reset
|
* @rmtoll SYSCFG_SWPR PxWP LL_SYSCFG_EnableSRAM2PageWRP_0_31
|
* @param SRAM2WRP This parameter can be a combination of the following values:
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE0
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE1
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE2
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE3
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE4
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE5
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE6
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE7
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE8
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE9
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE10
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE11
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE12
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE13
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE14
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE15
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE16 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE17 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE18 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE19 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE20 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE21 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE22 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE23 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE24 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE25 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE26 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE27 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE28 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE29 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE30 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE31 (*)
|
*
|
* (*) value not defined in all devices
|
* @retval None
|
*/
|
/* Legacy define */
|
#define LL_SYSCFG_EnableSRAM2PageWRP LL_SYSCFG_EnableSRAM2PageWRP_0_31
|
__STATIC_INLINE void LL_SYSCFG_EnableSRAM2PageWRP_0_31(uint32_t SRAM2WRP)
|
{
|
SET_BIT(SYSCFG->SWPR, SRAM2WRP);
|
}
|
|
#if defined(SYSCFG_SWPR2_PAGE63)
|
/**
|
* @brief Enable SRAM2 page write protection for Pages in range 32 to 63
|
* @note Write protection is cleared only by a system reset
|
* @rmtoll SYSCFG_SWPR2 PxWP LL_SYSCFG_EnableSRAM2PageWRP_32_63
|
* @param SRAM2WRP This parameter can be a combination of the following values:
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE32 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE33 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE34 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE35 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE36 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE37 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE38 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE39 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE40 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE41 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE42 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE43 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE44 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE45 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE46 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE47 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE48 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE49 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE50 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE51 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE52 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE53 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE54 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE55 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE56 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE57 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE58 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE59 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE60 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE61 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE62 (*)
|
* @arg @ref LL_SYSCFG_SRAM2WRP_PAGE63 (*)
|
*
|
* (*) value not defined in all devices
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_EnableSRAM2PageWRP_32_63(uint32_t SRAM2WRP)
|
{
|
SET_BIT(SYSCFG->SWPR2, SRAM2WRP);
|
}
|
#endif /* SYSCFG_SWPR2_PAGE63 */
|
|
/**
|
* @brief SRAM2 page write protection lock prior to erase
|
* @rmtoll SYSCFG_SKR KEY LL_SYSCFG_LockSRAM2WRP
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_LockSRAM2WRP(void)
|
{
|
/* Writing a wrong key reactivates the write protection */
|
WRITE_REG(SYSCFG->SKR, 0x00);
|
}
|
|
/**
|
* @brief SRAM2 page write protection unlock prior to erase
|
* @rmtoll SYSCFG_SKR KEY LL_SYSCFG_UnlockSRAM2WRP
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_SYSCFG_UnlockSRAM2WRP(void)
|
{
|
/* unlock the write protection of the SRAM2ER bit */
|
WRITE_REG(SYSCFG->SKR, 0xCA);
|
WRITE_REG(SYSCFG->SKR, 0x53);
|
}
|
|
/**
|
* @}
|
*/
|
|
|
/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
|
* @{
|
*/
|
|
/**
|
* @brief Return the device identifier
|
* @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID
|
* @retval Values between Min_Data=0x00 and Max_Data=0xFFFF (ex: device ID is 0x6415)
|
*/
|
__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
|
{
|
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
|
}
|
|
/**
|
* @brief Return the device revision identifier
|
* @note This field indicates the revision of the device.
|
* @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID
|
* @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
|
*/
|
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
|
{
|
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
|
}
|
|
/**
|
* @brief Enable the Debug Module during SLEEP mode
|
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
|
{
|
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
|
}
|
|
/**
|
* @brief Disable the Debug Module during SLEEP mode
|
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
|
{
|
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
|
}
|
|
/**
|
* @brief Enable the Debug Module during STOP mode
|
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
|
{
|
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
|
}
|
|
/**
|
* @brief Disable the Debug Module during STOP mode
|
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
|
{
|
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
|
}
|
|
/**
|
* @brief Enable the Debug Module during STANDBY mode
|
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
|
{
|
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
|
}
|
|
/**
|
* @brief Disable the Debug Module during STANDBY mode
|
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
|
{
|
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
|
}
|
|
/**
|
* @brief Set Trace pin assignment control
|
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n
|
* DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment
|
* @param PinAssignment This parameter can be one of the following values:
|
* @arg @ref LL_DBGMCU_TRACE_NONE
|
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
|
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
|
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
|
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
|
{
|
MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
|
}
|
|
/**
|
* @brief Get Trace pin assignment control
|
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n
|
* DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment
|
* @retval Returned value can be one of the following values:
|
* @arg @ref LL_DBGMCU_TRACE_NONE
|
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
|
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
|
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
|
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
|
*/
|
__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void)
|
{
|
return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
|
}
|
|
/**
|
* @brief Freeze APB1 peripherals (group1 peripherals)
|
* @rmtoll DBGMCU_APB1FZR1 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph
|
* @param Periphs This parameter can be a combination of the following values:
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
|
*
|
* (*) value not defined in all devices.
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
|
{
|
SET_BIT(DBGMCU->APB1FZR1, Periphs);
|
}
|
|
/**
|
* @brief Freeze APB1 peripherals (group2 peripherals)
|
* @rmtoll DBGMCU_APB1FZR2 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph
|
* @param Periphs This parameter can be a combination of the following values:
|
* @arg @ref LL_DBGMCU_APB1_GRP2_I2C4_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP2_LPTIM2_STOP
|
*
|
* (*) value not defined in all devices.
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph(uint32_t Periphs)
|
{
|
SET_BIT(DBGMCU->APB1FZR2, Periphs);
|
}
|
|
/**
|
* @brief Unfreeze APB1 peripherals (group1 peripherals)
|
* @rmtoll DBGMCU_APB1FZR1 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph
|
* @param Periphs This parameter can be a combination of the following values:
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN_STOP
|
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
|
*
|
* (*) value not defined in all devices.
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
|
{
|
CLEAR_BIT(DBGMCU->APB1FZR1, Periphs);
|
}
|
|
/**
|
* @brief Unfreeze APB1 peripherals (group2 peripherals)
|
* @rmtoll DBGMCU_APB1FZR2 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph
|
* @param Periphs This parameter can be a combination of the following values:
|
* @arg @ref LL_DBGMCU_APB1_GRP2_I2C4_STOP (*)
|
* @arg @ref LL_DBGMCU_APB1_GRP2_LPTIM2_STOP
|
*
|
* (*) value not defined in all devices.
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph(uint32_t Periphs)
|
{
|
CLEAR_BIT(DBGMCU->APB1FZR2, Periphs);
|
}
|
|
/**
|
* @brief Freeze APB2 peripherals
|
* @rmtoll DBGMCU_APB2FZ DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph
|
* @param Periphs This parameter can be a combination of the following values:
|
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
|
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*)
|
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP
|
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP
|
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP (*)
|
*
|
* (*) value not defined in all devices.
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs)
|
{
|
SET_BIT(DBGMCU->APB2FZ, Periphs);
|
}
|
|
/**
|
* @brief Unfreeze APB2 peripherals
|
* @rmtoll DBGMCU_APB2FZ DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph
|
* @param Periphs This parameter can be a combination of the following values:
|
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
|
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*)
|
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP
|
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP
|
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP (*)
|
*
|
* (*) value not defined in all devices.
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs)
|
{
|
CLEAR_BIT(DBGMCU->APB2FZ, Periphs);
|
}
|
|
/**
|
* @}
|
*/
|
|
#if defined(VREFBUF)
|
/** @defgroup SYSTEM_LL_EF_VREFBUF VREFBUF
|
* @{
|
*/
|
|
/**
|
* @brief Enable Internal voltage reference
|
* @rmtoll VREFBUF_CSR ENVR LL_VREFBUF_Enable
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_VREFBUF_Enable(void)
|
{
|
SET_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
|
}
|
|
/**
|
* @brief Disable Internal voltage reference
|
* @rmtoll VREFBUF_CSR ENVR LL_VREFBUF_Disable
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_VREFBUF_Disable(void)
|
{
|
CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_ENVR);
|
}
|
|
/**
|
* @brief Enable high impedance (VREF+pin is high impedance)
|
* @rmtoll VREFBUF_CSR HIZ LL_VREFBUF_EnableHIZ
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_VREFBUF_EnableHIZ(void)
|
{
|
SET_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ);
|
}
|
|
/**
|
* @brief Disable high impedance (VREF+pin is internally connected to the voltage reference buffer output)
|
* @rmtoll VREFBUF_CSR HIZ LL_VREFBUF_DisableHIZ
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_VREFBUF_DisableHIZ(void)
|
{
|
CLEAR_BIT(VREFBUF->CSR, VREFBUF_CSR_HIZ);
|
}
|
|
/**
|
* @brief Set the Voltage reference scale
|
* @rmtoll VREFBUF_CSR VRS LL_VREFBUF_SetVoltageScaling
|
* @param Scale This parameter can be one of the following values:
|
* @arg @ref LL_VREFBUF_VOLTAGE_SCALE0
|
* @arg @ref LL_VREFBUF_VOLTAGE_SCALE1
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_VREFBUF_SetVoltageScaling(uint32_t Scale)
|
{
|
MODIFY_REG(VREFBUF->CSR, VREFBUF_CSR_VRS, Scale);
|
}
|
|
/**
|
* @brief Get the Voltage reference scale
|
* @rmtoll VREFBUF_CSR VRS LL_VREFBUF_GetVoltageScaling
|
* @retval Returned value can be one of the following values:
|
* @arg @ref LL_VREFBUF_VOLTAGE_SCALE0
|
* @arg @ref LL_VREFBUF_VOLTAGE_SCALE1
|
*/
|
__STATIC_INLINE uint32_t LL_VREFBUF_GetVoltageScaling(void)
|
{
|
return (uint32_t)(READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRS));
|
}
|
|
/**
|
* @brief Check if Voltage reference buffer is ready
|
* @rmtoll VREFBUF_CSR VRR LL_VREFBUF_IsVREFReady
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_VREFBUF_IsVREFReady(void)
|
{
|
return (READ_BIT(VREFBUF->CSR, VREFBUF_CSR_VRR) == (VREFBUF_CSR_VRR));
|
}
|
|
/**
|
* @brief Get the trimming code for VREFBUF calibration
|
* @rmtoll VREFBUF_CCR TRIM LL_VREFBUF_GetTrimming
|
* @retval Between 0 and 0x3F
|
*/
|
__STATIC_INLINE uint32_t LL_VREFBUF_GetTrimming(void)
|
{
|
return (uint32_t)(READ_BIT(VREFBUF->CCR, VREFBUF_CCR_TRIM));
|
}
|
|
/**
|
* @brief Set the trimming code for VREFBUF calibration (Tune the internal reference buffer voltage)
|
* @rmtoll VREFBUF_CCR TRIM LL_VREFBUF_SetTrimming
|
* @param Value Between 0 and 0x3F
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_VREFBUF_SetTrimming(uint32_t Value)
|
{
|
WRITE_REG(VREFBUF->CCR, Value);
|
}
|
|
/**
|
* @}
|
*/
|
#endif /* VREFBUF */
|
|
/** @defgroup SYSTEM_LL_EF_FLASH FLASH
|
* @{
|
*/
|
|
/**
|
* @brief Set FLASH Latency
|
* @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency
|
* @param Latency This parameter can be one of the following values:
|
* @arg @ref LL_FLASH_LATENCY_0
|
* @arg @ref LL_FLASH_LATENCY_1
|
* @arg @ref LL_FLASH_LATENCY_2
|
* @arg @ref LL_FLASH_LATENCY_3
|
* @arg @ref LL_FLASH_LATENCY_4
|
* @arg @ref LL_FLASH_LATENCY_5 (*)
|
* @arg @ref LL_FLASH_LATENCY_6 (*)
|
* @arg @ref LL_FLASH_LATENCY_7 (*)
|
* @arg @ref LL_FLASH_LATENCY_8 (*)
|
* @arg @ref LL_FLASH_LATENCY_9 (*)
|
* @arg @ref LL_FLASH_LATENCY_10 (*)
|
* @arg @ref LL_FLASH_LATENCY_11 (*)
|
* @arg @ref LL_FLASH_LATENCY_12 (*)
|
* @arg @ref LL_FLASH_LATENCY_13 (*)
|
* @arg @ref LL_FLASH_LATENCY_14 (*)
|
* @arg @ref LL_FLASH_LATENCY_15 (*)
|
*
|
* (*) value not defined in all devices.
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
|
{
|
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
|
}
|
|
/**
|
* @brief Get FLASH Latency
|
* @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency
|
* @retval Returned value can be one of the following values:
|
* @arg @ref LL_FLASH_LATENCY_0
|
* @arg @ref LL_FLASH_LATENCY_1
|
* @arg @ref LL_FLASH_LATENCY_2
|
* @arg @ref LL_FLASH_LATENCY_3
|
* @arg @ref LL_FLASH_LATENCY_4
|
* @arg @ref LL_FLASH_LATENCY_5 (*)
|
* @arg @ref LL_FLASH_LATENCY_6 (*)
|
* @arg @ref LL_FLASH_LATENCY_7 (*)
|
* @arg @ref LL_FLASH_LATENCY_8 (*)
|
* @arg @ref LL_FLASH_LATENCY_9 (*)
|
* @arg @ref LL_FLASH_LATENCY_10 (*)
|
* @arg @ref LL_FLASH_LATENCY_11 (*)
|
* @arg @ref LL_FLASH_LATENCY_12 (*)
|
* @arg @ref LL_FLASH_LATENCY_13 (*)
|
* @arg @ref LL_FLASH_LATENCY_14 (*)
|
* @arg @ref LL_FLASH_LATENCY_15 (*)
|
*
|
* (*) value not defined in all devices.
|
*/
|
__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
|
{
|
return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
|
}
|
|
/**
|
* @brief Enable Prefetch
|
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
|
{
|
SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
|
}
|
|
/**
|
* @brief Disable Prefetch
|
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
|
{
|
CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
|
}
|
|
/**
|
* @brief Check if Prefetch buffer is enabled
|
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled
|
* @retval State of bit (1 or 0).
|
*/
|
__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
|
{
|
return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN));
|
}
|
|
/**
|
* @brief Enable Instruction cache
|
* @rmtoll FLASH_ACR ICEN LL_FLASH_EnableInstCache
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_EnableInstCache(void)
|
{
|
SET_BIT(FLASH->ACR, FLASH_ACR_ICEN);
|
}
|
|
/**
|
* @brief Disable Instruction cache
|
* @rmtoll FLASH_ACR ICEN LL_FLASH_DisableInstCache
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_DisableInstCache(void)
|
{
|
CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN);
|
}
|
|
/**
|
* @brief Enable Data cache
|
* @rmtoll FLASH_ACR DCEN LL_FLASH_EnableDataCache
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_EnableDataCache(void)
|
{
|
SET_BIT(FLASH->ACR, FLASH_ACR_DCEN);
|
}
|
|
/**
|
* @brief Disable Data cache
|
* @rmtoll FLASH_ACR DCEN LL_FLASH_DisableDataCache
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_DisableDataCache(void)
|
{
|
CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN);
|
}
|
|
/**
|
* @brief Enable Instruction cache reset
|
* @note bit can be written only when the instruction cache is disabled
|
* @rmtoll FLASH_ACR ICRST LL_FLASH_EnableInstCacheReset
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_EnableInstCacheReset(void)
|
{
|
SET_BIT(FLASH->ACR, FLASH_ACR_ICRST);
|
}
|
|
/**
|
* @brief Disable Instruction cache reset
|
* @rmtoll FLASH_ACR ICRST LL_FLASH_DisableInstCacheReset
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_DisableInstCacheReset(void)
|
{
|
CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST);
|
}
|
|
/**
|
* @brief Enable Data cache reset
|
* @note bit can be written only when the data cache is disabled
|
* @rmtoll FLASH_ACR DCRST LL_FLASH_EnableDataCacheReset
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_EnableDataCacheReset(void)
|
{
|
SET_BIT(FLASH->ACR, FLASH_ACR_DCRST);
|
}
|
|
/**
|
* @brief Disable Data cache reset
|
* @rmtoll FLASH_ACR DCRST LL_FLASH_DisableDataCacheReset
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_DisableDataCacheReset(void)
|
{
|
CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST);
|
}
|
|
/**
|
* @brief Enable Flash Power-down mode during run mode or Low-power run mode
|
* @note Flash memory can be put in power-down mode only when the code is executed
|
* from RAM
|
* @note Flash must not be accessed when power down is enabled
|
* @note Flash must not be put in power-down while a program or an erase operation
|
* is on-going
|
* @rmtoll FLASH_ACR RUN_PD LL_FLASH_EnableRunPowerDown\n
|
* FLASH_PDKEYR PDKEY1 LL_FLASH_EnableRunPowerDown\n
|
* FLASH_PDKEYR PDKEY2 LL_FLASH_EnableRunPowerDown
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_EnableRunPowerDown(void)
|
{
|
/* Following values must be written consecutively to unlock the RUN_PD bit in
|
FLASH_ACR */
|
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1);
|
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2);
|
SET_BIT(FLASH->ACR, FLASH_ACR_RUN_PD);
|
}
|
|
/**
|
* @brief Disable Flash Power-down mode during run mode or Low-power run mode
|
* @rmtoll FLASH_ACR RUN_PD LL_FLASH_DisableRunPowerDown\n
|
* FLASH_PDKEYR PDKEY1 LL_FLASH_DisableRunPowerDown\n
|
* FLASH_PDKEYR PDKEY2 LL_FLASH_DisableRunPowerDown
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_DisableRunPowerDown(void)
|
{
|
/* Following values must be written consecutively to unlock the RUN_PD bit in
|
FLASH_ACR */
|
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1);
|
WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2);
|
CLEAR_BIT(FLASH->ACR, FLASH_ACR_RUN_PD);
|
}
|
|
/**
|
* @brief Enable Flash Power-down mode during Sleep or Low-power sleep mode
|
* @note Flash must not be put in power-down while a program or an erase operation
|
* is on-going
|
* @rmtoll FLASH_ACR SLEEP_PD LL_FLASH_EnableSleepPowerDown
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_EnableSleepPowerDown(void)
|
{
|
SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD);
|
}
|
|
/**
|
* @brief Disable Flash Power-down mode during Sleep or Low-power sleep mode
|
* @rmtoll FLASH_ACR SLEEP_PD LL_FLASH_DisableSleepPowerDown
|
* @retval None
|
*/
|
__STATIC_INLINE void LL_FLASH_DisableSleepPowerDown(void)
|
{
|
CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD);
|
}
|
|
/**
|
* @}
|
*/
|
|
/**
|
* @}
|
*/
|
|
/**
|
* @}
|
*/
|
|
#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) || defined (VREFBUF) */
|
|
/**
|
* @}
|
*/
|
|
#ifdef __cplusplus
|
}
|
#endif
|
|
#endif /* STM32L4xx_LL_SYSTEM_H */
|
