diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
|
--- linux-imx/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi 2021-09-08 18:41:11.000000000 +0800
|
+++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi 2021-12-13 15:47:27.308336693 +0800
|
@@ -31,7 +31,41 @@
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
default-brightness-level = <6>;
|
status = "okay";
|
- };
|
+ };
|
+
|
+ buzzer: pwm-buzzer {
|
+ compatible = "pwm-beeper";
|
+ pwms = <&pwm2 0 500000>;
|
+ status = "okay";
|
+ };
|
+
|
+ leds {
|
+ compatible = "gpio-leds";
|
+ pinctrl-names = "default";
|
+ pinctrl-0 = <&pinctrl_gpio_leds>;
|
+ status = "okay";
|
+
|
+ sysled {
|
+ lable = "sysled";
|
+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
|
+ linux,default-trigger = "heartbeat";
|
+ default-state = "off";
|
+ };
|
+ };
|
+
|
+ keys {
|
+ compatible = "gpio-keys";
|
+ pinctrl-names = "default";
|
+ pinctrl-0 = <&pinctrl_gpio_keys>;
|
+ autorepeat;
|
+ status = "okay";
|
+
|
+ key_user {
|
+ lable = "key_user";
|
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
|
+ linux,code = <KEY_ENTER>;
|
+ };
|
+ };
|
|
pxp_v4l2 {
|
compatible = "fsl,imx6ul-pxp-v4l2", "fsl,imx6sx-pxp-v4l2", "fsl,imx6sl-pxp-v4l2";
|
@@ -43,19 +77,16 @@
|
regulator-name = "VSD_3V3";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
off-on-delay-us = <20000>;
|
enable-active-high;
|
};
|
|
reg_peri_3v3: regulator-peri-3v3 {
|
compatible = "regulator-fixed";
|
- pinctrl-names = "default";
|
- pinctrl-0 = <&pinctrl_peri_3v3>;
|
regulator-name = "VPERI_3V3";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
- gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
|
+
|
/*
|
* If you want to want to make this dynamic please
|
* check schematics and test all affected peripherals:
|
@@ -78,6 +109,24 @@
|
gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
|
};
|
|
+ reg_3p3v: 3p3v {
|
+ compatible = "regulator-fixed";
|
+ regulator-name = "3P3V";
|
+ regulator-min-microvolt = <3300000>;
|
+ regulator-max-microvolt = <3300000>;
|
+ regulator-boot-on;
|
+ regulator-always-on;
|
+ };
|
+
|
+ reg_1p8v: 1p8v {
|
+ compatible = "regulator-fixed";
|
+ regulator-name = "1P8V";
|
+ regulator-min-microvolt = <1800000>;
|
+ regulator-max-microvolt = <1800000>;
|
+ regulator-boot-on;
|
+ regulator-always-on;
|
+ };
|
+
|
sound {
|
compatible = "simple-audio-card";
|
simple-audio-card,name = "mx6ul-wm8960";
|
@@ -115,6 +164,15 @@
|
};
|
};
|
|
+ sound-mqs {
|
+ compatible = "fsl,imx-audio-mqs";
|
+ model = "mqs-audio";
|
+ cpu-dai = <&sai1>;
|
+ asrc-controller = <&asrc>;
|
+ audio-codec = <&mqs>;
|
+ status = "okay";
|
+ };
|
+
|
sound-wm8960 {
|
compatible = "fsl,imx6ul-evk-wm8960",
|
"fsl,imx-audio-wm8960";
|
@@ -142,7 +200,7 @@
|
compatible = "spi-gpio";
|
pinctrl-names = "default";
|
pinctrl-0 = <&pinctrl_spi4>;
|
- status = "okay";
|
+ status = "disabled"; /* MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 conflict with fec1 reset pin */
|
pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
|
gpio-sck = <&gpio5 11 0>;
|
gpio-mosi = <&gpio5 10 0>;
|
@@ -169,7 +227,7 @@
|
};
|
|
&csi {
|
- status = "disabled";
|
+ status = "okay";
|
|
port {
|
csi1_ep: endpoint {
|
@@ -184,6 +242,26 @@
|
pinctrl-0 = <&pinctrl_i2c2>;
|
status = "okay";
|
|
+ gt9xx@5d {
|
+ compatible = "goodix,gt9147";
|
+ reg = <0x5d>;
|
+ pinctrl-names = "default";
|
+ pinctrl-0 = <&pinctrl_ts_pins>;
|
+
|
+ irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
|
+ reset-gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
|
+ interrupt-parent = <&gpio5>;
|
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
+
|
+ status = "okay";
|
+ };
|
+
|
+ rtc@6f {
|
+ compatible = "isil,isl1208";
|
+ reg = <0x6f>;
|
+ status = "okay";
|
+ };
|
+
|
codec: wm8960@1a {
|
#sound-dai-cells = <0>;
|
compatible = "wlf,wm8960";
|
@@ -192,7 +270,8 @@
|
wlf,hp-cfg = <3 2 3>;
|
wlf,gpio-cfg = <1 3>;
|
clocks = <&clks IMX6UL_CLK_SAI2>;
|
- clock-names = "mclk";
|
+ clock-names = "mclk";
|
+ status = "disabled";
|
};
|
|
ov5640: ov5640@3c {
|
@@ -202,12 +281,19 @@
|
pinctrl-0 = <&pinctrl_csi1>;
|
clocks = <&clks IMX6UL_CLK_CSI>;
|
clock-names = "csi_mclk";
|
- pwn-gpios = <&gpio_spi 6 1>;
|
- rst-gpios = <&gpio_spi 5 0>;
|
+
|
+ DOVDD-supply = <®_3p3v>;
|
+ VDD-supply = <®_1p8v>;
|
+ AVDD-supply = <®_3p3v>;
|
+ DVDD-supply = <®_3p3v>;
|
+
|
+ pwn-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
|
+ rst-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
|
csi_id = <0>;
|
mclk = <24000000>;
|
mclk_source = <0>;
|
- status = "disabled";
|
+ /* rotation = <180>; */
|
+ status = "okay";
|
port {
|
ov5640_ep: endpoint {
|
remote-endpoint = <&csi1_ep>;
|
@@ -222,6 +308,9 @@
|
phy-mode = "rmii";
|
phy-handle = <ðphy0>;
|
phy-supply = <®_peri_3v3>;
|
+ phy-reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; /* MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 conflict with spi4 */
|
+ phy-reset-duration = <50>;
|
+ phy-reset-post-delay = <15>;
|
status = "okay";
|
};
|
|
@@ -231,14 +320,17 @@
|
phy-mode = "rmii";
|
phy-handle = <ðphy1>;
|
phy-supply = <®_peri_3v3>;
|
+ phy-reset-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; /* MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 conflict with sai2 */
|
+ phy-reset-duration = <50>;
|
+ phy-reset-post-delay = <15>;
|
status = "okay";
|
|
mdio {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
- ethphy0: ethernet-phy@2 {
|
- reg = <2>;
|
+ ethphy0: ethernet-phy@0 {
|
+ reg = <0>;
|
micrel,led-mode = <1>;
|
clocks = <&clks IMX6UL_CLK_ENET_REF>;
|
clock-names = "rmii-ref";
|
@@ -301,21 +393,21 @@
|
|
display0: display@0 {
|
bits-per-pixel = <16>;
|
- bus-width = <24>;
|
+ bus-width = <16>;
|
|
display-timings {
|
native-mode = <&timing0>;
|
|
timing0: timing0 {
|
- clock-frequency = <9200000>;
|
- hactive = <480>;
|
- vactive = <272>;
|
- hfront-porch = <8>;
|
- hback-porch = <4>;
|
- hsync-len = <41>;
|
- vback-porch = <2>;
|
- vfront-porch = <4>;
|
- vsync-len = <10>;
|
+ clock-frequency = <30000000>;
|
+ hactive = <800>;
|
+ vactive = <480>;
|
+ hfront-porch = <40>;
|
+ hback-porch = <88>;
|
+ hsync-len = <48>;
|
+ vback-porch = <32>;
|
+ vfront-porch = <13>;
|
+ vsync-len = <3>;
|
hsync-active = <0>;
|
vsync-active = <0>;
|
de-active = <1>;
|
@@ -332,6 +424,13 @@
|
status = "okay";
|
};
|
|
+&pwm2 {
|
+ #pwm-cells = <2>;
|
+ pinctrl-names = "default";
|
+ pinctrl-0 = <&pinctrl_pwm2>;
|
+ status = "okay";
|
+};
|
+
|
&pxp {
|
status = "okay";
|
};
|
@@ -339,7 +438,7 @@
|
&qspi {
|
pinctrl-names = "default";
|
pinctrl-0 = <&pinctrl_qspi>;
|
- status = "okay";
|
+ status = "disabled"; /* disable it for the pins conflict with GPIO Led and Key */
|
|
flash0: n25q256a@0 {
|
#address-cells = <1>;
|
@@ -352,6 +451,24 @@
|
};
|
};
|
|
+&mqs {
|
+ pinctrl-names = "default";
|
+ pinctrl-0 = <&pinctrl_mqs>;
|
+ clocks = <&clks IMX6UL_CLK_SAI1>;
|
+ clock-names = "mclk";
|
+ status = "okay";
|
+};
|
+
|
+
|
+&sai1 {
|
+ assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>,
|
+ <&clks IMX6UL_CLK_SAI1>;
|
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
|
+ assigned-clock-rates = <0>, <24576000>;
|
+ fsl,sai-mclk-direction-output;
|
+ status = "okay";
|
+};
|
+
|
&sai2 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&pinctrl_sai2>;
|
@@ -360,7 +477,7 @@
|
assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
|
assigned-clock-rates = <0>, <12288000>;
|
fsl,sai-mclk-direction-output;
|
- status = "okay";
|
+ status = "disabled"; /* MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 conflict with fec2 reset pin */
|
};
|
|
&snvs_poweroff {
|
@@ -384,7 +501,7 @@
|
pinctrl-assert-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
|
port = <1>;
|
sven_low_active;
|
- status = "okay";
|
+ status = "disabled";
|
};
|
|
&tsc {
|
@@ -439,6 +556,7 @@
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
+ no-1-8-v;
|
keep-power-in-suspend;
|
wakeup-source;
|
vmmc-supply = <®_sd1_vmmc>;
|
@@ -446,8 +564,8 @@
|
};
|
|
&usdhc2 {
|
- pinctrl-names = "default";
|
- pinctrl-0 = <&pinctrl_usdhc2>;
|
+ pinctrl-names = "default";
|
+ pinctrl-0 = <&pinctrl_usdhc2>;
|
non-removable;
|
keep-power-in-suspend;
|
wakeup-source;
|
@@ -463,6 +581,32 @@
|
&iomuxc {
|
pinctrl-names = "default";
|
|
+ pinctrl_gpio_leds: gpio-leds {
|
+ fsl,pins = <
|
+ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x17059 /* led run */
|
+ >;
|
+ };
|
+
|
+ pinctrl_gpio_keys: gpio-keys {
|
+ fsl,pins = <
|
+ MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x17059 /* gpio key */
|
+ >;
|
+ };
|
+
|
+ pinctrl_mqs: pinctrl-mqs-pins {
|
+ fsl,pins = <
|
+ MX6UL_PAD_JTAG_TDI__MQS_LEFT 0x11088 /* MQS Left */
|
+ MX6UL_PAD_JTAG_TDO__MQS_RIGHT 0x11088 /* MQS Right */
|
+ >;
|
+ };
|
+
|
+ pinctrl_ts_pins: pinctrl-ts-pins {
|
+ fsl,pins = <
|
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 /* TouchScreen IRQ */
|
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 /* TouchScreen RST */
|
+ >;
|
+ };
|
+
|
pinctrl_csi1: csi1grp {
|
fsl,pins = <
|
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
|
@@ -490,6 +634,7 @@
|
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
|
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
|
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
|
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10B0 /* ENET1 RESET conflict with pinctrl_spi4 */
|
>;
|
};
|
|
@@ -505,6 +650,7 @@
|
MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
|
MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
|
MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031
|
+ MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x10B0 /* ENET2 RESET conflict with pinctrl_sai2 */
|
>;
|
};
|
|
@@ -594,19 +740,18 @@
|
MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
|
MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
|
MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
|
- MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
|
>;
|
};
|
|
- pinctrl_peri_3v3: peri3v3grp {
|
+ pinctrl_pwm1: pwm1grp {
|
fsl,pins = <
|
- MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
|
+ MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
|
>;
|
};
|
|
- pinctrl_pwm1: pwm1grp {
|
+ pinctrl_pwm2: pwm2grp {
|
fsl,pins = <
|
- MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
|
+ MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x110b0
|
>;
|
};
|
|
@@ -625,7 +770,6 @@
|
fsl,pins = <
|
MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1
|
MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1
|
- MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1
|
MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000
|
>;
|
};
|
@@ -678,9 +822,7 @@
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
- MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
|
- MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */
|
- MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */
|
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */
|
>;
|
};
|
|
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/imx6ul.dtsi linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi
|
--- linux-imx/arch/arm/boot/dts/imx6ul.dtsi 2021-09-08 18:41:11.000000000 +0800
|
+++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi 2021-12-13 15:47:27.312336750 +0800
|
@@ -727,6 +727,7 @@
|
offset = <0x34>;
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
+ status = "disabled"; /* disable CPU builtin RTC and will use ISL1208 */
|
};
|
|
snvs_poweroff: snvs-poweroff {
|
@@ -791,6 +792,12 @@
|
reg = <0x020e4000 0x4000>;
|
};
|
|
+ mqs: mqs {
|
+ compatible = "fsl,imx6sx-mqs";
|
+ gpr = <&gpr>;
|
+ status = "disabled";
|
+ };
|
+
|
gpt2: timer@20e8000 {
|
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
|
reg = <0x020e8000 0x4000>;
|
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/configs/imx6ull_defconfig linux-imx-imx6ull/arch/arm/configs/imx6ull_defconfig
|
--- linux-imx/arch/arm/configs/imx6ull_defconfig 1970-01-01 08:00:00.000000000 +0800
|
+++ linux-imx-imx6ull/arch/arm/configs/imx6ull_defconfig 2021-12-16 12:58:54.243346404 +0800
|
@@ -0,0 +1,572 @@
|
+CONFIG_KERNEL_LZO=y
|
+CONFIG_SYSVIPC=y
|
+CONFIG_POSIX_MQUEUE=y
|
+CONFIG_NO_HZ=y
|
+CONFIG_HIGH_RES_TIMERS=y
|
+CONFIG_PREEMPT=y
|
+CONFIG_IKCONFIG=y
|
+CONFIG_IKCONFIG_PROC=y
|
+CONFIG_LOG_BUF_SHIFT=18
|
+CONFIG_CGROUPS=y
|
+CONFIG_MEMCG=y
|
+CONFIG_CGROUP_PIDS=y
|
+CONFIG_CGROUP_FREEZER=y
|
+CONFIG_CGROUP_DEVICE=y
|
+CONFIG_NAMESPACES=y
|
+CONFIG_USER_NS=y
|
+CONFIG_RELAY=y
|
+CONFIG_BLK_DEV_INITRD=y
|
+CONFIG_EXPERT=y
|
+CONFIG_PERF_EVENTS=y
|
+# CONFIG_SLUB_DEBUG is not set
|
+# CONFIG_COMPAT_BRK is not set
|
+CONFIG_ARCH_MXC=y
|
+CONFIG_SOC_IMX6Q=y
|
+CONFIG_SOC_IMX6SL=y
|
+CONFIG_SOC_IMX6SLL=y
|
+CONFIG_SOC_IMX6SX=y
|
+CONFIG_SOC_IMX6UL=y
|
+CONFIG_SOC_IMX7D=y
|
+CONFIG_SOC_IMX7ULP=y
|
+CONFIG_SMP=y
|
+CONFIG_VMSPLIT_2G=y
|
+CONFIG_ARM_PSCI=y
|
+CONFIG_HIGHMEM=y
|
+CONFIG_FORCE_MAX_ZONEORDER=14
|
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
|
+CONFIG_KEXEC=y
|
+CONFIG_CPU_FREQ=y
|
+CONFIG_CPU_FREQ_STAT=y
|
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
+CONFIG_CPUFREQ_DT=y
|
+CONFIG_ARM_IMX6Q_CPUFREQ=y
|
+CONFIG_ARM_IMX_CPUFREQ_DT=y
|
+CONFIG_CPU_IDLE=y
|
+CONFIG_ARM_CPUIDLE=y
|
+CONFIG_ARM_PSCI_CPUIDLE=y
|
+CONFIG_VFP=y
|
+CONFIG_NEON=y
|
+CONFIG_PM_DEBUG=y
|
+CONFIG_PM_TEST_SUSPEND=y
|
+CONFIG_MODULES=y
|
+CONFIG_MODULE_UNLOAD=y
|
+CONFIG_MODVERSIONS=y
|
+CONFIG_MODULE_SRCVERSION_ALL=y
|
+# CONFIG_BLK_DEV_BSG is not set
|
+CONFIG_BINFMT_MISC=m
|
+CONFIG_CMA=y
|
+CONFIG_NET=y
|
+CONFIG_PACKET=y
|
+CONFIG_UNIX=y
|
+CONFIG_INET=y
|
+CONFIG_IP_MULTICAST=y
|
+CONFIG_IP_PNP=y
|
+CONFIG_IP_PNP_DHCP=y
|
+CONFIG_NETFILTER=y
|
+CONFIG_VLAN_8021Q=m
|
+CONFIG_LLC2=y
|
+CONFIG_CAN=y
|
+CONFIG_CAN_FLEXCAN=y
|
+CONFIG_BT=y
|
+CONFIG_BT_RFCOMM=y
|
+CONFIG_BT_RFCOMM_TTY=y
|
+CONFIG_BT_BNEP=y
|
+CONFIG_BT_BNEP_MC_FILTER=y
|
+CONFIG_BT_BNEP_PROTO_FILTER=y
|
+CONFIG_BT_HIDP=y
|
+CONFIG_BT_HCIBTUSB=y
|
+CONFIG_BT_HCIUART=y
|
+CONFIG_BT_HCIUART_BCSP=y
|
+CONFIG_BT_HCIUART_LL=y
|
+CONFIG_BT_HCIUART_3WIRE=y
|
+CONFIG_BT_HCIUART_MRVL=y
|
+CONFIG_BT_HCIVHCI=y
|
+CONFIG_BT_MRVL=y
|
+CONFIG_BT_MRVL_SDIO=y
|
+CONFIG_CFG80211=y
|
+CONFIG_NL80211_TESTMODE=y
|
+CONFIG_CFG80211_WEXT=y
|
+CONFIG_MAC80211=y
|
+CONFIG_PCI=y
|
+CONFIG_PCI_MSI=y
|
+CONFIG_PCI_IMX6_HOST=y
|
+CONFIG_PCI_IMX6_EP=y
|
+CONFIG_PCI_ENDPOINT=y
|
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
|
+CONFIG_PCI_EPF_TEST=y
|
+CONFIG_DEVTMPFS=y
|
+CONFIG_DEVTMPFS_MOUNT=y
|
+# CONFIG_STANDALONE is not set
|
+CONFIG_FW_LOADER_USER_HELPER=y
|
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
|
+CONFIG_IMX_WEIM=y
|
+CONFIG_CONNECTOR=y
|
+CONFIG_MTD=y
|
+CONFIG_MTD_CMDLINE_PARTS=y
|
+CONFIG_MTD_BLOCK=y
|
+CONFIG_MTD_CFI=y
|
+CONFIG_MTD_JEDECPROBE=y
|
+CONFIG_MTD_CFI_INTELEXT=y
|
+CONFIG_MTD_CFI_AMDSTD=y
|
+CONFIG_MTD_CFI_STAA=y
|
+CONFIG_MTD_PHYSMAP=y
|
+CONFIG_MTD_PHYSMAP_OF=y
|
+CONFIG_MTD_DATAFLASH=y
|
+CONFIG_MTD_SST25L=y
|
+CONFIG_MTD_RAW_NAND=y
|
+CONFIG_MTD_NAND_GPMI_NAND=y
|
+CONFIG_MTD_NAND_MXC=y
|
+CONFIG_MTD_SPI_NOR=y
|
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
|
+CONFIG_MTD_UBI=y
|
+CONFIG_MTD_UBI_FASTMAP=y
|
+CONFIG_MTD_UBI_BLOCK=y
|
+CONFIG_OF_OVERLAY=y
|
+CONFIG_BLK_DEV_LOOP=y
|
+CONFIG_BLK_DEV_RAM=y
|
+CONFIG_BLK_DEV_RAM_SIZE=65536
|
+CONFIG_SENSORS_FXOS8700=y
|
+CONFIG_SENSORS_FXAS2100X=y
|
+CONFIG_PCI_ENDPOINT_TEST=y
|
+CONFIG_EEPROM_AT24=y
|
+CONFIG_EEPROM_AT25=y
|
+# CONFIG_SCSI_PROC_FS is not set
|
+CONFIG_BLK_DEV_SD=y
|
+CONFIG_SCSI_CONSTANTS=y
|
+CONFIG_SCSI_LOGGING=y
|
+CONFIG_SCSI_SCAN_ASYNC=y
|
+# CONFIG_SCSI_LOWLEVEL is not set
|
+CONFIG_ATA=y
|
+CONFIG_SATA_AHCI_PLATFORM=y
|
+CONFIG_AHCI_IMX=y
|
+CONFIG_PATA_IMX=y
|
+CONFIG_MD=y
|
+CONFIG_BLK_DEV_MD=m
|
+CONFIG_BLK_DEV_DM=m
|
+CONFIG_DM_CRYPT=m
|
+CONFIG_NETDEVICES=y
|
+# CONFIG_NET_VENDOR_BROADCOM is not set
|
+CONFIG_CS89x0=y
|
+CONFIG_CS89x0_PLATFORM=y
|
+# CONFIG_NET_VENDOR_FARADAY is not set
|
+# CONFIG_NET_VENDOR_INTEL is not set
|
+# CONFIG_NET_VENDOR_MARVELL is not set
|
+# CONFIG_NET_VENDOR_MICREL is not set
|
+# CONFIG_NET_VENDOR_MICROCHIP is not set
|
+# CONFIG_NET_VENDOR_NATSEMI is not set
|
+# CONFIG_NET_VENDOR_SEEQ is not set
|
+CONFIG_SMC91X=y
|
+CONFIG_SMC911X=y
|
+CONFIG_SMSC911X=y
|
+# CONFIG_NET_VENDOR_STMICRO is not set
|
+CONFIG_MICREL_PHY=y
|
+CONFIG_AT803X_PHY=y
|
+CONFIG_USB_PEGASUS=m
|
+CONFIG_USB_RTL8150=m
|
+CONFIG_USB_RTL8152=y
|
+CONFIG_USB_LAN78XX=y
|
+CONFIG_USB_USBNET=y
|
+CONFIG_USB_NET_CDC_EEM=m
|
+CONFIG_USB_NET_SMSC95XX=y
|
+CONFIG_USB_NET_MCS7830=y
|
+# CONFIG_WLAN_VENDOR_ADMTEK is not set
|
+# CONFIG_WLAN_VENDOR_ATH is not set
|
+# CONFIG_WLAN_VENDOR_ATMEL is not set
|
+# CONFIG_WLAN_VENDOR_BROADCOM is not set
|
+# CONFIG_WLAN_VENDOR_CISCO is not set
|
+# CONFIG_WLAN_VENDOR_INTEL is not set
|
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
|
+# CONFIG_WLAN_VENDOR_MARVELL is not set
|
+CONFIG_MT7601U=y
|
+CONFIG_MT76x0U=y
|
+CONFIG_MT76x2U=y
|
+CONFIG_MT7663U=y
|
+# CONFIG_WLAN_VENDOR_MICROCHIP is not set
|
+# CONFIG_WLAN_VENDOR_RALINK is not set
|
+CONFIG_RTL8187=y
|
+CONFIG_RTL8192CE=y
|
+CONFIG_RTL8188EE=y
|
+CONFIG_RTL8192EE=y
|
+CONFIG_RTL8821AE=y
|
+CONFIG_RTL8192CU=y
|
+CONFIG_RTL8XXXU=y
|
+CONFIG_RTL8XXXU_UNTESTED=y
|
+# CONFIG_WLAN_VENDOR_RSI is not set
|
+# CONFIG_WLAN_VENDOR_ST is not set
|
+# CONFIG_WLAN_VENDOR_TI is not set
|
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
|
+# CONFIG_WLAN_VENDOR_QUANTENNA is not set
|
+CONFIG_INPUT_MOUSEDEV=y
|
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
|
+CONFIG_INPUT_EVDEV=y
|
+CONFIG_KEYBOARD_GPIO=y
|
+CONFIG_KEYBOARD_RPMSG=y
|
+CONFIG_KEYBOARD_IMX=y
|
+# CONFIG_INPUT_MOUSE is not set
|
+CONFIG_INPUT_TOUCHSCREEN=y
|
+# CONFIG_TOUCHSCREEN_CT36X_WLD is not set
|
+CONFIG_TOUCHSCREEN_GOODIX=y
|
+# CONFIG_TOUCHSCREEN_SYNAPTICS_DSX is not set
|
+# CONFIG_SERIO_SERPORT is not set
|
+# CONFIG_LEGACY_PTYS is not set
|
+CONFIG_SERIAL_IMX=y
|
+CONFIG_SERIAL_IMX_CONSOLE=y
|
+CONFIG_SERIAL_FSL_LPUART=y
|
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
|
+CONFIG_SERIAL_DEV_BUS=y
|
+# CONFIG_I2C_COMPAT is not set
|
+CONFIG_I2C_CHARDEV=y
|
+CONFIG_I2C_MUX=y
|
+CONFIG_I2C_MUX_GPIO=y
|
+# CONFIG_I2C_HELPER_AUTO is not set
|
+CONFIG_I2C_ALGOPCF=m
|
+CONFIG_I2C_ALGOPCA=m
|
+CONFIG_I2C_GPIO=y
|
+CONFIG_I2C_IMX=y
|
+CONFIG_I2C_IMX_LPI2C=y
|
+CONFIG_SPI=y
|
+CONFIG_SPI_FSL_LPSPI=y
|
+CONFIG_SPI_FSL_QUADSPI=y
|
+CONFIG_SPI_GPIO=y
|
+CONFIG_SPI_IMX=y
|
+CONFIG_SPI_SPIDEV=y
|
+CONFIG_SPI_SLAVE=y
|
+CONFIG_SPI_SLAVE_TIME=y
|
+CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
|
+CONFIG_GPIO_SYSFS=y
|
+CONFIG_GPIO_MXC=y
|
+CONFIG_GPIO_SIOX=m
|
+CONFIG_GPIO_IMX_RPMSG=y
|
+CONFIG_GPIO_MAX732X=y
|
+CONFIG_GPIO_PCA953X=y
|
+CONFIG_GPIO_PCF857X=y
|
+CONFIG_GPIO_STMPE=y
|
+CONFIG_GPIO_74X164=y
|
+CONFIG_POWER_RESET=y
|
+CONFIG_POWER_RESET_SYSCON=y
|
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
|
+CONFIG_POWER_SUPPLY=y
|
+CONFIG_SENSORS_MC13783_ADC=y
|
+CONFIG_SENSORS_GPIO_FAN=y
|
+CONFIG_SENSORS_IIO_HWMON=y
|
+CONFIG_SENSORS_MAX17135=y
|
+CONFIG_SENSORS_MAG3110=y
|
+CONFIG_THERMAL=y
|
+CONFIG_THERMAL_STATISTICS=y
|
+CONFIG_THERMAL_WRITABLE_TRIPS=y
|
+CONFIG_CPU_THERMAL=y
|
+CONFIG_IMX_THERMAL=y
|
+CONFIG_DEVICE_THERMAL=y
|
+CONFIG_WATCHDOG=y
|
+CONFIG_DA9063_WATCHDOG=m
|
+CONFIG_DA9062_WATCHDOG=y
|
+CONFIG_RN5T618_WATCHDOG=y
|
+CONFIG_IMX2_WDT=y
|
+CONFIG_IMX7ULP_WDT=y
|
+CONFIG_MFD_DA9052_I2C=y
|
+CONFIG_MFD_DA9062=y
|
+CONFIG_MFD_DA9063=y
|
+CONFIG_MFD_MC13XXX_SPI=y
|
+CONFIG_MFD_MC13XXX_I2C=y
|
+CONFIG_MFD_MAX17135=y
|
+CONFIG_MFD_RN5T618=y
|
+CONFIG_MFD_SI476X_CORE=y
|
+CONFIG_MFD_STMPE=y
|
+CONFIG_MFD_WM8994=y
|
+CONFIG_REGULATOR=y
|
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
+CONFIG_REGULATOR_ANATOP=y
|
+CONFIG_REGULATOR_DA9052=y
|
+CONFIG_REGULATOR_DA9062=y
|
+CONFIG_REGULATOR_DA9063=y
|
+CONFIG_REGULATOR_GPIO=y
|
+CONFIG_REGULATOR_MAX17135=y
|
+CONFIG_REGULATOR_MC13783=y
|
+CONFIG_REGULATOR_MC13892=y
|
+CONFIG_REGULATOR_PF1550_RPMSG=y
|
+CONFIG_REGULATOR_PFUZE100=y
|
+CONFIG_REGULATOR_RN5T618=y
|
+CONFIG_RC_CORE=y
|
+CONFIG_RC_DEVICES=y
|
+CONFIG_IR_GPIO_CIR=y
|
+CONFIG_MEDIA_SUPPORT=y
|
+CONFIG_MEDIA_USB_SUPPORT=y
|
+CONFIG_USB_VIDEO_CLASS=y
|
+CONFIG_USB_GSPCA=y
|
+# CONFIG_RADIO_ADAPTERS is not set
|
+CONFIG_V4L_PLATFORM_DRIVERS=y
|
+CONFIG_VIDEO_MUX=y
|
+CONFIG_VIDEO_MXC_CAPTURE=y
|
+CONFIG_VIDEO_MXC_OUTPUT=y
|
+CONFIG_VIDEO_MXC_CSI_CAMERA=y
|
+CONFIG_MXC_VADC=y
|
+CONFIG_MXC_MIPI_CSI=y
|
+CONFIG_MXC_CAMERA_OV5640_V2=y
|
+CONFIG_MXC_CAMERA_OV5640_MIPI_V2=y
|
+CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=y
|
+CONFIG_VIDEO_MXC_IPU_OUTPUT=y
|
+CONFIG_VIDEO_MXC_PXP_V4L2=y
|
+CONFIG_V4L_MEM2MEM_DRIVERS=y
|
+CONFIG_VIDEO_CODA=m
|
+CONFIG_VIDEO_IMX_PXP=y
|
+CONFIG_VIDEO_ADV7180=m
|
+CONFIG_VIDEO_OV2680=m
|
+CONFIG_VIDEO_OV5645=m
|
+CONFIG_DRM=y
|
+CONFIG_DRM_PANEL_LVDS=y
|
+CONFIG_DRM_PANEL_SIMPLE=y
|
+CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
|
+CONFIG_DRM_TI_TFP410=y
|
+CONFIG_FB_MXS=y
|
+CONFIG_FB_MXC_SYNC_PANEL=y
|
+CONFIG_FB_MXC_OVERLAY=y
|
+CONFIG_FB_MXC_MIPI_DSI_NORTHWEST=y
|
+CONFIG_FB_MXC_ADV7535=y
|
+CONFIG_FB_MXC_TRULY_PANEL_TFT3P5581E=y
|
+CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y
|
+CONFIG_FB_MXC_RK_PANEL_RK055AHD042=y
|
+CONFIG_FB_MXC_RK_PANEL_RK055IQH042=y
|
+CONFIG_FB_MXC_MIPI_DSI_SAMSUNG=y
|
+CONFIG_FB_MXC_MIPI_DSI=y
|
+CONFIG_FB_MXC_LDB=y
|
+CONFIG_FB_MXC_EINK_PANEL=y
|
+CONFIG_FB_MXC_EINK_V2_PANEL=y
|
+CONFIG_FB_MXC_HDMI=y
|
+CONFIG_FB_MXS_SII902X=y
|
+CONFIG_FB_MXC_DCIC=y
|
+CONFIG_LCD_CLASS_DEVICE=y
|
+CONFIG_LCD_L4F00242T03=y
|
+CONFIG_LCD_PLATFORM=y
|
+CONFIG_BACKLIGHT_PWM=y
|
+CONFIG_BACKLIGHT_GPIO=y
|
+CONFIG_FRAMEBUFFER_CONSOLE=y
|
+CONFIG_LOGO=y
|
+CONFIG_SOUND=y
|
+CONFIG_SND=y
|
+# CONFIG_SND_DRIVERS is not set
|
+# CONFIG_SND_PCI is not set
|
+# CONFIG_SND_ARM is not set
|
+# CONFIG_SND_SPI is not set
|
+# CONFIG_SND_USB is not set
|
+CONFIG_SND_SOC=y
|
+CONFIG_SND_SOC_FSL_ASRC=y
|
+CONFIG_SND_SOC_FSL_SAI=y
|
+CONFIG_SND_SOC_FSL_MQS=y
|
+CONFIG_SND_SOC_FSL_RPMSG=y
|
+CONFIG_SND_IMX_SOC=y
|
+CONFIG_SND_SIMPLE_CARD=y
|
+CONFIG_HID_MULTITOUCH=y
|
+CONFIG_USB=y
|
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
+CONFIG_USB_EHCI_HCD=y
|
+CONFIG_USB_EHCI_MXC=y
|
+CONFIG_USB_HCD_TEST_MODE=y
|
+CONFIG_USB_ACM=m
|
+CONFIG_USB_STORAGE=y
|
+CONFIG_USB_CHIPIDEA=y
|
+CONFIG_USB_CHIPIDEA_UDC=y
|
+CONFIG_USB_CHIPIDEA_HOST=y
|
+CONFIG_USB_SERIAL=m
|
+CONFIG_USB_SERIAL_GENERIC=y
|
+CONFIG_USB_SERIAL_FTDI_SIO=m
|
+CONFIG_USB_SERIAL_OPTION=m
|
+CONFIG_USB_TEST=m
|
+CONFIG_USB_EHSET_TEST_FIXTURE=m
|
+CONFIG_NOP_USB_XCEIV=y
|
+CONFIG_USB_MXS_PHY=y
|
+CONFIG_USB_GADGET=y
|
+CONFIG_USB_FSL_USB2=y
|
+CONFIG_USB_CONFIGFS=y
|
+CONFIG_USB_CONFIGFS_SERIAL=y
|
+CONFIG_USB_CONFIGFS_ACM=y
|
+CONFIG_USB_CONFIGFS_OBEX=y
|
+CONFIG_USB_CONFIGFS_NCM=y
|
+CONFIG_USB_CONFIGFS_ECM=y
|
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
|
+CONFIG_USB_CONFIGFS_RNDIS=y
|
+CONFIG_USB_CONFIGFS_EEM=y
|
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
|
+CONFIG_USB_CONFIGFS_F_LB_SS=y
|
+CONFIG_USB_CONFIGFS_F_FS=y
|
+CONFIG_USB_CONFIGFS_F_UAC1=y
|
+CONFIG_USB_CONFIGFS_F_UAC2=y
|
+CONFIG_USB_CONFIGFS_F_MIDI=y
|
+CONFIG_USB_CONFIGFS_F_HID=y
|
+CONFIG_USB_CONFIGFS_F_UVC=y
|
+CONFIG_USB_CONFIGFS_F_PRINTER=y
|
+CONFIG_USB_ZERO=m
|
+CONFIG_USB_AUDIO=m
|
+CONFIG_USB_ETH=m
|
+CONFIG_USB_G_NCM=m
|
+CONFIG_USB_GADGETFS=m
|
+CONFIG_USB_FUNCTIONFS=m
|
+CONFIG_USB_MASS_STORAGE=m
|
+CONFIG_USB_G_SERIAL=m
|
+CONFIG_MMC=y
|
+CONFIG_MMC_SDHCI=y
|
+CONFIG_MMC_SDHCI_PLTFM=y
|
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
+CONFIG_NEW_LEDS=y
|
+CONFIG_LEDS_CLASS=y
|
+CONFIG_LEDS_GPIO=y
|
+CONFIG_LEDS_PWM=y
|
+CONFIG_LEDS_TRIGGERS=y
|
+CONFIG_LEDS_TRIGGER_TIMER=y
|
+CONFIG_LEDS_TRIGGER_ONESHOT=y
|
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
|
+CONFIG_LEDS_TRIGGER_GPIO=y
|
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
+CONFIG_RTC_CLASS=y
|
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
|
+CONFIG_RTC_DRV_DS1307=y
|
+CONFIG_RTC_DRV_ISL1208=y
|
+CONFIG_RTC_DRV_PCF8523=y
|
+CONFIG_RTC_DRV_PCF8563=y
|
+CONFIG_RTC_DRV_M41T80=y
|
+CONFIG_RTC_DRV_RC5T619=y
|
+CONFIG_RTC_DRV_DA9063=y
|
+CONFIG_RTC_DRV_MC13XXX=y
|
+CONFIG_RTC_DRV_MXC=y
|
+CONFIG_RTC_DRV_MXC_V2=y
|
+CONFIG_RTC_DRV_SNVS=y
|
+CONFIG_RTC_DRV_IMX_RPMSG=y
|
+CONFIG_DMADEVICES=y
|
+CONFIG_FSL_EDMA=y
|
+CONFIG_IMX_SDMA=y
|
+CONFIG_MXS_DMA=y
|
+CONFIG_MXC_PXP_V2=y
|
+CONFIG_MXC_PXP_V3=y
|
+CONFIG_DMATEST=m
|
+CONFIG_STAGING=y
|
+CONFIG_STAGING_MEDIA=y
|
+CONFIG_COMMON_CLK_PWM=y
|
+CONFIG_MAILBOX=y
|
+CONFIG_REMOTEPROC=y
|
+CONFIG_IMX_REMOTEPROC=y
|
+CONFIG_EXTCON_USB_GPIO=y
|
+CONFIG_IIO=y
|
+CONFIG_IMX7D_ADC=y
|
+CONFIG_RN5T618_ADC=y
|
+CONFIG_VF610_ADC=y
|
+CONFIG_PWM=y
|
+CONFIG_PWM_FSL_FTM=y
|
+CONFIG_PWM_IMX27=y
|
+CONFIG_PWM_IMX_TPM=y
|
+CONFIG_PHY_MIXEL_LVDS=y
|
+CONFIG_PHY_MIXEL_LVDS_COMBO=y
|
+CONFIG_NVMEM_IMX_OCOTP=y
|
+CONFIG_NVMEM_SNVS_LPGPR=y
|
+CONFIG_TEE=y
|
+CONFIG_OPTEE=y
|
+CONFIG_MUX_MMIO=y
|
+CONFIG_SIOX=m
|
+CONFIG_SIOX_BUS_GPIO=m
|
+CONFIG_MXC_SIM=y
|
+CONFIG_MXC_IPU=y
|
+CONFIG_MXC_SIMv2=y
|
+CONFIG_MXC_MLB150=y
|
+CONFIG_MXC_IPU_V3_PRE=y
|
+CONFIG_MXC_HDMI_CEC=y
|
+CONFIG_MXC_MIPI_CSI2=y
|
+CONFIG_EXT2_FS=y
|
+CONFIG_EXT2_FS_XATTR=y
|
+CONFIG_EXT2_FS_POSIX_ACL=y
|
+CONFIG_EXT2_FS_SECURITY=y
|
+CONFIG_EXT3_FS=y
|
+CONFIG_EXT3_FS_POSIX_ACL=y
|
+CONFIG_EXT3_FS_SECURITY=y
|
+CONFIG_QUOTA=y
|
+CONFIG_QUOTA_NETLINK_INTERFACE=y
|
+# CONFIG_PRINT_QUOTA_WARNING is not set
|
+CONFIG_AUTOFS4_FS=y
|
+CONFIG_FUSE_FS=y
|
+CONFIG_OVERLAY_FS=y
|
+CONFIG_MSDOS_FS=y
|
+CONFIG_VFAT_FS=y
|
+CONFIG_EXFAT_FS=y
|
+CONFIG_NTFS_FS=y
|
+CONFIG_NTFS_RW=y
|
+CONFIG_TMPFS=y
|
+CONFIG_TMPFS_POSIX_ACL=y
|
+CONFIG_NFS_FS=y
|
+CONFIG_NFS_V3_ACL=y
|
+CONFIG_NFS_V4=y
|
+CONFIG_NFS_V4_1=y
|
+CONFIG_NFS_V4_2=y
|
+CONFIG_ROOT_NFS=y
|
+CONFIG_NLS_DEFAULT="cp437"
|
+CONFIG_NLS_CODEPAGE_437=y
|
+CONFIG_NLS_ASCII=y
|
+CONFIG_NLS_ISO8859_1=y
|
+CONFIG_NLS_ISO8859_15=m
|
+CONFIG_NLS_UTF8=y
|
+CONFIG_SECURITYFS=y
|
+CONFIG_CRYPTO_USER=y
|
+CONFIG_CRYPTO_TEST=m
|
+CONFIG_CRYPTO_ECHAINIV=m
|
+CONFIG_CRYPTO_TLS=m
|
+CONFIG_CRYPTO_CFB=m
|
+CONFIG_CRYPTO_CTS=m
|
+CONFIG_CRYPTO_LRW=m
|
+CONFIG_CRYPTO_OFB=m
|
+CONFIG_CRYPTO_PCBC=m
|
+CONFIG_CRYPTO_XCBC=m
|
+CONFIG_CRYPTO_VMAC=m
|
+CONFIG_CRYPTO_MD4=m
|
+CONFIG_CRYPTO_MD5=m
|
+CONFIG_CRYPTO_MICHAEL_MIC=y
|
+CONFIG_CRYPTO_RMD128=m
|
+CONFIG_CRYPTO_RMD160=m
|
+CONFIG_CRYPTO_RMD256=m
|
+CONFIG_CRYPTO_RMD320=m
|
+CONFIG_CRYPTO_SHA512=m
|
+CONFIG_CRYPTO_SHA3=m
|
+CONFIG_CRYPTO_SM3=m
|
+CONFIG_CRYPTO_STREEBOG=m
|
+CONFIG_CRYPTO_TGR192=m
|
+CONFIG_CRYPTO_WP512=m
|
+CONFIG_CRYPTO_ANUBIS=m
|
+CONFIG_CRYPTO_ARC4=m
|
+CONFIG_CRYPTO_BLOWFISH=m
|
+CONFIG_CRYPTO_CAMELLIA=m
|
+CONFIG_CRYPTO_CAST5=m
|
+CONFIG_CRYPTO_CAST6=m
|
+CONFIG_CRYPTO_DES=m
|
+CONFIG_CRYPTO_FCRYPT=m
|
+CONFIG_CRYPTO_KHAZAD=m
|
+CONFIG_CRYPTO_SALSA20=m
|
+CONFIG_CRYPTO_SEED=m
|
+CONFIG_CRYPTO_SERPENT=m
|
+CONFIG_CRYPTO_SM4=m
|
+CONFIG_CRYPTO_TEA=m
|
+CONFIG_CRYPTO_TWOFISH=m
|
+CONFIG_CRYPTO_DEFLATE=y
|
+CONFIG_CRYPTO_LZO=y
|
+CONFIG_CRYPTO_ZSTD=y
|
+CONFIG_CRYPTO_ANSI_CPRNG=m
|
+CONFIG_CRYPTO_USER_API_RNG=m
|
+CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO=m
|
+CONFIG_CRYPTO_DEV_FSL_CAAM=m
|
+CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST=m
|
+CONFIG_CRYPTO_DEV_SAHARA=y
|
+CONFIG_CRYPTO_DEV_MXS_DCP=y
|
+CONFIG_CRC_CCITT=m
|
+CONFIG_CRC_T10DIF=y
|
+CONFIG_CRC_ITU_T=m
|
+CONFIG_CRC7=m
|
+CONFIG_LIBCRC32C=m
|
+CONFIG_DMA_CMA=y
|
+CONFIG_FONTS=y
|
+CONFIG_FONT_8x8=y
|
+CONFIG_FONT_8x16=y
|
+CONFIG_PRINTK_TIME=y
|
+# CONFIG_DEBUG_BUGVERBOSE is not set
|
+CONFIG_MAGIC_SYSRQ=y
|
+CONFIG_DEBUG_FS=y
|
+# CONFIG_SCHED_DEBUG is not set
|
+# CONFIG_DEBUG_PREEMPT is not set
|
+# CONFIG_FTRACE is not set
|
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/Makefile linux-imx-imx6ull/Makefile
|
--- linux-imx/Makefile 2021-09-08 18:41:11.000000000 +0800
|
+++ linux-imx-imx6ull/Makefile 2021-12-16 12:58:31.871555092 +0800
|
@@ -367,7 +367,8 @@
|
# Alternatively CROSS_COMPILE can be set in the environment.
|
# Default value for CROSS_COMPILE is not to prefix executables
|
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
|
-ARCH ?= $(SUBARCH)
|
+ARCH ?= arm
|
+CROSS_COMPILE=/opt/buildroot/cortexA7/bin/arm-linux-
|
|
# Architecture as present in compile.h
|
UTS_MACHINE := $(ARCH)
|
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/sound/soc/fsl/fsl_mqs.c linux-imx-imx6ull/sound/soc/fsl/fsl_mqs.c
|
--- linux-imx/sound/soc/fsl/fsl_mqs.c 2021-09-08 18:41:11.000000000 +0800
|
+++ linux-imx-imx6ull/sound/soc/fsl/fsl_mqs.c 2021-12-13 15:47:27.352337331 +0800
|
@@ -247,6 +247,8 @@
|
&fsl_mqs_dai, 1);
|
if (ret)
|
goto err_free_gpr_np;
|
+
|
+ printk("NXP mqs sound card driver register ok\n");
|
return 0;
|
|
err_free_gpr_np:
|
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/sound/soc/fsl/fsl_sai.c linux-imx-imx6ull/sound/soc/fsl/fsl_sai.c
|
--- linux-imx/sound/soc/fsl/fsl_sai.c 2021-09-08 18:41:11.000000000 +0800
|
+++ linux-imx-imx6ull/sound/soc/fsl/fsl_sai.c 2021-12-13 15:47:27.352337331 +0800
|
@@ -1349,7 +1349,7 @@
|
sai->bus_clk = NULL;
|
}
|
|
- for (i = 0; i < FSL_SAI_MCLK_MAX; i++) {
|
+ for (i = 1; i < FSL_SAI_MCLK_MAX; i++) {
|
sprintf(tmp, "mclk%d", i);
|
sai->mclk_clk[i] = devm_clk_get(&pdev->dev, tmp);
|
if (IS_ERR(sai->mclk_clk[i])) {
|
