#!/bin/bash
|
#
|
# Reference: <<i.MX Linux® User's Guide.pdf>>
|
#
|
# SD Card partition layout: 1 Sector= 512B
|
#
|
# +-------------------------------+-----------------------+---------------------------------+
|
# | Start Address | Size | Usage |
|
# +-------------------------------+-----------------------+---------------------------------+
|
# | 0x0 | 2 sectors(1K) | Reserved for partition table |
|
# +-------------------------------+-----------------------+---------------------------------+
|
# | 2 sector(1K, 0x400) | 20414 sectors(9M+) | i.MX6ULL u-boot image |
|
# +-------------------------------+-----------------------+---------------------------------+
|
# | 20480 sector(10M, 0xa00000) | 204800 sectors(100MB) | FAT32 Boot partition |
|
# +-------------------------------+-----------------------+---------------------------------+
|
# | 225280 sector(110M,0x6e00000) | Remaining Space | EXT4 filesystem for rootfs |
|
# +-------------------------------+-----------------------+---------------------------------+
|
#
|
|
PRJ_PATH=`pwd`
|
PRJ_NAME=`basename ${PRJ_PATH}`
|
|
IMAGE_PATH=${PRJ_PATH}/boot/
|
|
BOARD=igkboard
|
|
# rootfs should be buildroot/yocto or bullseye for debian system
|
ROOTFS=buildroot
|
|
# linux kernel tarball path and branch
|
TAR_PATH=${PRJ_PATH}/../tarball
|
|
BOOT=emmc
|
|
IMAGE_NAME=linuxsys_${BOARD}_${ROOTFS}.img
|
if [ $ROOTFS == buildroot ] ; then
|
IMAGE_SIZE=512
|
else
|
IMAGE_SIZE=2048
|
fi
|
|
#i.MX6/i.MX7 read uboot from mmc start on sector #2
|
UBOOT_OFSET=2
|
MMC_SECSIZE=512
|
|
# U-boot space Size 10MB
|
UBOOT_SIZE=10
|
|
# vfat boot partition 100MB
|
BOOT_SIZE=100
|
|
|
IMG_UBOOT=${PRJ_PATH}/u-boot-${BOARD}-emmc.imx
|
IMG_KERNEL=${IMAGE_PATH}/zImage
|
IMG_DTB=${IMAGE_PATH}/${BOARD}-emmc.dtb
|
ROOTFS_TAR=${PRJ_PATH}/../rootfs/rootfs_${ROOTFS}.tar.bz2
|
|
MNT_POINT=./mnt
|
LOOP_DEV=`losetup -f | cut -d/ -f3`
|
|
set -u
|
set -e
|
|
function exit_handler()
|
{
|
echo "Shell script exit now, do some clean work"
|
echo ""
|
|
set +e
|
|
mountpoint $MNT_POINT > /dev/null 2>&1
|
if [ $? == 0 ] ; then
|
echo "umount ${MNT_POINT}"
|
umount ${MNT_POINT}
|
fi
|
|
rm -rf ${MNT_POINT}
|
|
if [ -L /dev/mapper/${LOOP_DEV}p1 ] ; then
|
echo "kpartx -dv /dev/${LOOP_DEV}"
|
kpartx -dv /dev/${LOOP_DEV}
|
fi
|
|
losetup -a | grep "${LOOP_DEV}" > /dev/null 2>&1
|
if [ $? == 0 ] ; then
|
echo "losetup -d /dev/${LOOP_DEV}"
|
losetup -d /dev/${LOOP_DEV}
|
fi
|
}
|
|
STAGE=0
|
function msg_banner()
|
{
|
STAGE=`expr $STAGE + 1`
|
|
echo ""
|
echo "+---------------------------------------------+"
|
printf " Stage $STAGE: $1\n"
|
echo "+---------------------------------------------+"
|
echo ""
|
}
|
|
|
function generate_image()
|
{
|
# FAT32 boot partition start/end address in MB
|
BOOT_START=${UBOOT_SIZE}
|
BOOT_END=`expr ${BOOT_START} + ${BOOT_SIZE}`
|
|
msg_banner " <${STAGE}> Generate system image "
|
|
dd if=/dev/zero of=${IMAGE_NAME} bs=1024k count=${IMAGE_SIZE} && sync
|
chmod a+x ${IMAGE_NAME}
|
|
msg_banner " <${STAGE}> Partition system image "
|
|
parted ${IMAGE_NAME} mklabel msdos
|
parted ${IMAGE_NAME} mkpart primary fat32 ${BOOT_START}M ${BOOT_END}M
|
parted ${IMAGE_NAME} mkpart primary ext4 ${BOOT_END}M 100%
|
|
sync
|
}
|
|
|
function format_partition()
|
{
|
msg_banner " <${STAGE}> losetup image on $LOOP_DEV"
|
|
losetup /dev/${LOOP_DEV} ${IMAGE_NAME}
|
kpartx -av /dev/${LOOP_DEV}
|
|
msg_banner " <${STAGE}> Format system image partition"
|
mkfs.vfat /dev/mapper/${LOOP_DEV}p1
|
mkfs.ext4 /dev/mapper/${LOOP_DEV}p2
|
sync
|
}
|
|
function install_sysimg()
|
{
|
msg_banner " <${STAGE}> Install u-boot image"
|
sudo dd if=${IMG_UBOOT} of=${IMAGE_NAME} bs=${MMC_SECSIZE} seek=${UBOOT_OFSET} conv=notrunc,sync
|
|
msg_banner " <${STAGE}> Install linux kernel image"
|
|
mkdir -p ${MNT_POINT}
|
mount -t vfat /dev/mapper/${LOOP_DEV}p1 ${MNT_POINT}
|
|
set -x
|
cp ${IMG_KERNEL} ${MNT_POINT}
|
cp ${IMG_DTB} ${MNT_POINT}
|
sync
|
set +x
|
|
umount ${MNT_POINT}
|
}
|
|
function install_rootfs()
|
{
|
msg_banner " <${STAGE}> Install root filesystem "
|
|
if [ ! -f ${ROOTFS_TAR} ] ; then
|
echo "ERROR: rootfs tarball file '${ROOTFS_TAR}' not exist..."
|
exit ;
|
fi
|
|
mount -t ext4 /dev/mapper/${LOOP_DEV}p2 ${MNT_POINT}
|
tar -xjf ${ROOTFS_TAR} -C ${MNT_POINT} && sync
|
chown -R root.root ${MNT_POINT} && sync
|
|
umount ${MNT_POINT}
|
}
|
|
function do_distclean()
|
{
|
printf "\n\n -- do distclean in `basename ${PRJ_PATH}` --\n\n"
|
|
rm -f *${BOARD}*
|
rm -rf boot/*Image*
|
rm -rf boot/overlays/
|
rm -rf boot/*${BOARD}*
|
exit 0;
|
}
|
|
function do_image()
|
{
|
mkdir -p ${MNT_POINT}
|
|
generate_image
|
|
format_partition
|
|
install_sysimg
|
|
install_rootfs
|
|
msg_banner " bzip2 compress system image "
|
rm -f ${IMAGE_NAME}*.bz2
|
bzip2 ${IMAGE_NAME}
|
|
rm -rf ${MNT_POINT}
|
|
printf "\n\n -- generate system image done --\n\n"
|
}
|
|
function do_root()
|
{
|
echo ""
|
if [[ $1 == "yes" ]] && [ `id -u` != 0 ] ; then
|
echo "ERROR: This action must run as root!"
|
echo ""
|
exit;
|
elif [[ $1 != "yes" ]] && [ `id -u` == 0 ] ; then
|
echo "ERROR: This action cannot run as root!"
|
echo ""
|
exit;
|
fi
|
}
|
|
function do_usage()
|
{
|
echo ""
|
echo "Usage:"
|
echo " $0 [-b] [-c] [-h]"
|
echo " -b: download and build $PRJ_NAME"
|
echo " -c: clean all the source code"
|
echo " -h: show this help message"
|
echo ""
|
echo " WARNNING: This shell script must run as sudo"
|
echo ""
|
exit;
|
}
|
|
trap 'exit_handler' EXIT
|
|
while getopts "bch" OPTNAME
|
do
|
case "${OPTNAME}" in
|
"b")
|
break;
|
;;
|
|
"c")
|
do_root "yes"
|
do_distclean
|
;;
|
|
"*")
|
do_usage
|
;;
|
esac
|
done
|
|
do_root "yes"
|
do_image
|
exit;
|
