[common]
|
devid="RaspberryPi#1"
|
|
# 树莓派连接的外设信息，使能或相关硬件连接的Pin管脚
|
[hardware]
|
|
# 是否使能 DS18B20 温湿度传感器模块，0:禁用 1:使能
|
ds18b20=1
|
|
# 是否使能 TSL2561 光强传感器模块，0:禁用 1:使能
|
tsl2561=1
|
|
# TSL2561 光强传感器光强阈值
|
lux_threshold=0.10
|
|
# 红外传感器(有人时输出高电平), 格式： {名称:BCM编码:控制电平}
|
# Indoor(#16)<->(black/gray) Hallway(#12)<->(yellow/red)
|
# 测试延时: while true; do gpioget gpiochip0 18; sleep 1; done
|
gpio_inpin={infrared_indoor:23:1},{infrared_hallway:18:1}
|
|
# 继电器GPIO输出控制, 格式： {名称:BCM编码:控制电平}
|
# Relay(1) <-> #35 Relay(2) <-> #37
|
gpio_outpin={light_indoor:19:1},{light_hallway:26:1}
|
|
# 红外探测到人后，继电器控制灯亮的时长
|
light_intval=15
|
|
|
[logger]
|
|
# 日志记录文件
|
file=/var/log/lightd.log
|
|
# 日志级别: 0:ERROR 1:WARN 2:INFO 3:DEBUG 4:TRACE
|
level=2
|
|
# 日志回滚大小
|
size=1024
|
|
|
[broker]
|
|
# broker 服务器地址和端口号
|
hostname="weike-iot.com"
|
port=2262
|
|
# broker 认证连接的 token
|
token="gu8wq8mfj1gadkyh6yo5"
|
|
# broker 认证连接的用户名和密码
|
username="lingyun"
|
password="lingyun"
|
|
# broker给subsciber和publisher发送PING报文保持 keepalive 的时间周期，单位是秒
|
keepalive=30
|
|
# Qos0: 发送者只发送一次消息，不进行重试，Broker不会返回确认消息。在Qos0情况下，Broker可能没有接受到消息
|
# Qos1: 发送者最少发送一次消息，确保消息到达Broker，Broker需要返回确认消息PUBACK。在Qos1情况下，Broker可能接受到重复消息
|
# Qos2: Qos2使用两阶段确认来保证消息的不丢失和不重复。在Qos2情况下，Broker肯定会收到消息，且只收到一次
|
|
[publisher]
|
|
# mosquitto_pub -h weike-iot.com -p 2262 -u "gu8wq8mfj1gadkyh6yo5" -t v1/devices/me/telemetry -m '{"temperature":66.66, "humidity":88.88}'
|
pubTopic="v1/devices/me/telemetry"
|
pubQos=0
|
|
# Publisher上报传感器数据的周期，单位是秒
|
interval=60
|
|
[subsciber]
|
|
# mosquitto_sub -h weike-iot.com -p 2262 -u "gu8wq8mfj1gadkyh6yo5" -t "v1/devices/me/rpc/request/+"
|
# {"method":"setValue","params":{"device":"lightIndoor","status":true}}
|
# {"method":"setValue","params":{"device":"lightHallway","status":true}}
|
subTopic="v1/devices/me/rpc/request/+"
|
subQos=0
|
