/******************************************************************************
|
*
|
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
|
*
|
* This program is free software; you can redistribute it and/or modify it
|
* under the terms of version 2 of the GNU General Public License as
|
* published by the Free Software Foundation.
|
*
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
* more details.
|
*
|
* You should have received a copy of the GNU General Public License along with
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
*
|
*
|
******************************************************************************/
|
|
|
#ifndef __ODM_DBG_H__
|
#define __ODM_DBG_H__
|
|
|
//-----------------------------------------------------------------------------
|
// Define the debug levels
|
//
|
// 1. DBG_TRACE and DBG_LOUD are used for normal cases.
|
// So that, they can help SW engineer to develope or trace states changed
|
// and also help HW enginner to trace every operation to and from HW,
|
// e.g IO, Tx, Rx.
|
//
|
// 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases,
|
// which help us to debug SW or HW.
|
//
|
//-----------------------------------------------------------------------------
|
//
|
// Never used in a call to ODM_RT_TRACE()!
|
//
|
#define ODM_DBG_OFF 1
|
|
//
|
// Fatal bug.
|
// For example, Tx/Rx/IO locked up, OS hangs, memory access violation,
|
// resource allocation failed, unexpected HW behavior, HW BUG and so on.
|
//
|
#define ODM_DBG_SERIOUS 2
|
|
//
|
// Abnormal, rare, or unexpeted cases.
|
// For example, IRP/Packet/OID canceled, device suprisely unremoved and so on.
|
//
|
#define ODM_DBG_WARNING 3
|
|
//
|
// Normal case with useful information about current SW or HW state.
|
// For example, Tx/Rx descriptor to fill, Tx/Rx descriptor completed status,
|
// SW protocol state change, dynamic mechanism state change and so on.
|
//
|
#define ODM_DBG_LOUD 4
|
|
//
|
// Normal case with detail execution flow or information.
|
//
|
#define ODM_DBG_TRACE 5
|
|
//-----------------------------------------------------------------------------
|
// Define the tracing components
|
//
|
//-----------------------------------------------------------------------------
|
//BB Functions
|
#define ODM_COMP_DIG BIT0
|
#define ODM_COMP_RA_MASK BIT1
|
#define ODM_COMP_DYNAMIC_TXPWR BIT2
|
#define ODM_COMP_FA_CNT BIT3
|
#define ODM_COMP_RSSI_MONITOR BIT4
|
#define ODM_COMP_CCK_PD BIT5
|
#define ODM_COMP_ANT_DIV BIT6
|
#define ODM_COMP_PWR_SAVE BIT7
|
#define ODM_COMP_PWR_TRAIN BIT8
|
#define ODM_COMP_RATE_ADAPTIVE BIT9
|
#define ODM_COMP_PATH_DIV BIT10
|
#define ODM_COMP_PSD BIT11
|
#define ODM_COMP_DYNAMIC_PRICCA BIT12
|
#define ODM_COMP_RXHP BIT13
|
#define ODM_COMP_MP BIT14
|
#define ODM_COMP_DYNAMIC_ATC BIT15
|
#define ODM_COMP_ACS BIT16
|
#define PHYDM_COMP_ADAPTIVITY BIT17
|
#define PHYDM_COMP_RA_DBG BIT18
|
#define PHYDM_COMP_TXBF BIT19
|
//MAC Functions
|
#define ODM_COMP_EDCA_TURBO BIT20
|
#define ODM_COMP_EARLY_MODE BIT21
|
#define ODM_FW_DEBUG_TRACE BIT22
|
//RF Functions
|
#define ODM_COMP_TX_PWR_TRACK BIT24
|
#define ODM_COMP_RX_GAIN_TRACK BIT25
|
#define ODM_COMP_CALIBRATION BIT26
|
//Common Functions
|
#define BEAMFORMING_DEBUG BIT29
|
#define ODM_COMP_COMMON BIT30
|
#define ODM_COMP_INIT BIT31
|
|
/*------------------------Export Marco Definition---------------------------*/
|
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
|
#define RT_PRINTK DbgPrint
|
#elif (DM_ODM_SUPPORT_TYPE == ODM_CE)
|
#define DbgPrint printk
|
#define RT_PRINTK(fmt, args...) DbgPrint( "%s(): " fmt, __FUNCTION__, ## args);
|
#define RT_DISP(dbgtype, dbgflag, printstr)
|
#else
|
#define DbgPrint panic_printk
|
#define RT_PRINTK(fmt, args...) DbgPrint( "%s(): " fmt, __FUNCTION__, ## args);
|
#endif
|
|
#ifndef ASSERT
|
#define ASSERT(expr)
|
#endif
|
|
#if DBG
|
#define ODM_RT_TRACE(pDM_Odm, comp, level, fmt) \
|
if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel || level == ODM_DBG_SERIOUS)) \
|
{ \
|
RT_PRINTK fmt; \
|
}
|
|
#define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt) \
|
if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \
|
{ \
|
RT_PRINTK fmt; \
|
}
|
|
#define ODM_RT_ASSERT(pDM_Odm, expr, fmt) \
|
if(!(expr)) { \
|
DbgPrint( "Assertion failed! %s at ......\n", #expr); \
|
DbgPrint( " ......%s,%s,line=%d\n",__FILE__,__FUNCTION__,__LINE__); \
|
RT_PRINTK fmt; \
|
ASSERT(FALSE); \
|
}
|
#define ODM_dbg_enter() { DbgPrint("==> %s\n", __FUNCTION__); }
|
#define ODM_dbg_exit() { DbgPrint("<== %s\n", __FUNCTION__); }
|
#define ODM_dbg_trace(str) { DbgPrint("%s:%s\n", __FUNCTION__, str); }
|
|
#define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr) \
|
if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \
|
{ \
|
int __i; \
|
pu1Byte __ptr = (pu1Byte)ptr; \
|
DbgPrint("[ODM] "); \
|
DbgPrint(title_str); \
|
DbgPrint(" "); \
|
for( __i=0; __i<6; __i++ ) \
|
DbgPrint("%02X%s", __ptr[__i], (__i==5)?"":"-"); \
|
DbgPrint("\n"); \
|
}
|
#else
|
#define ODM_RT_TRACE(pDM_Odm, comp, level, fmt)
|
#define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt)
|
#define ODM_RT_ASSERT(pDM_Odm, expr, fmt)
|
#define ODM_dbg_enter()
|
#define ODM_dbg_exit()
|
#define ODM_dbg_trace(str)
|
#define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr)
|
#endif
|
|
|
VOID
|
ODM_InitDebugSetting(
|
IN PDM_ODM_T pDM_Odm
|
);
|
|
|
|
#if 0
|
#if DBG
|
#define DbgPrint printk
|
|
#define PRINT_DATA(_TitleString, _HexData, _HexDataLen) \
|
{ \
|
char *szTitle = _TitleString; \
|
pu1Byte pbtHexData = _HexData; \
|
u4Byte u4bHexDataLen = _HexDataLen; \
|
u4Byte __i; \
|
DbgPrint("%s", szTitle); \
|
for (__i=0;__i<u4bHexDataLen;__i++) \
|
{ \
|
if ((__i & 15) == 0) \
|
{ \
|
DbgPrint("\n"); \
|
} \
|
DbgPrint("%02X%s", pbtHexData[__i], ( ((__i&3)==3) ? " " : " ") ); \
|
} \
|
DbgPrint("\n"); \
|
}
|
|
// RT_PRINT_XXX macros: implemented for debugging purpose.
|
// Added by Annie, 2005-11-21.
|
#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) \
|
if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \
|
{ \
|
int __i; \
|
pu1Byte ptr = (pu1Byte)_HexData; \
|
DbgPrint("Rtl819x: "); \
|
DbgPrint(_TitleString); \
|
for( __i=0; __i<(int)_HexDataLen; __i++ ) \
|
{ \
|
DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" "); \
|
if (((__i + 1) % 16) == 0) DbgPrint("\n"); \
|
} \
|
DbgPrint("\n"); \
|
}
|
|
#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr) \
|
if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \
|
{ \
|
int __i; \
|
pu1Byte ptr = (pu1Byte)_Ptr; \
|
DbgPrint("Rtl819x: "); \
|
DbgPrint(_TitleString); \
|
DbgPrint(" "); \
|
for( __i=0; __i<6; __i++ ) \
|
DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-"); \
|
DbgPrint("\n"); \
|
}
|
|
#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum) \
|
if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \
|
{ \
|
int __i, __j; \
|
pu1Byte ptr = (pu1Byte)_Ptr; \
|
DbgPrint("Rtl819x: "); \
|
DbgPrint(_TitleString); \
|
DbgPrint("\n"); \
|
for( __i=0; __i<(int)_AddNum; __i++ ) \
|
{ \
|
for( __j=0; __j<6; __j++ ) \
|
DbgPrint("%02X%s", ptr[__i*6+__j], (__j==5)?"":"-"); \
|
DbgPrint("\n"); \
|
} \
|
}
|
|
// Added by Annie, 2005-11-22.
|
#define MAX_STR_LEN 64
|
#define PRINTABLE(_ch) (_ch>=' ' &&_ch<='~' ) // I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.
|
|
#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) \
|
if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \
|
{ \
|
int __i; \
|
u1Byte buffer[MAX_STR_LEN]; \
|
int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \
|
PlatformZeroMemory( buffer, MAX_STR_LEN ); \
|
PlatformMoveMemory( buffer, (pu1Byte)_Ptr, length ); \
|
for( __i=0; __i<MAX_STR_LEN; __i++ ) \
|
{ \
|
if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \
|
} \
|
buffer[length] = '\0'; \
|
DbgPrint("Rtl819x: "); \
|
DbgPrint(_TitleString); \
|
DbgPrint(": %d, <%s>\n", _Len, buffer); \
|
}
|
|
#else // of #if DBG
|
#define DbgPrint(...)
|
#define PRINT_DATA(_TitleString, _HexData, _HexDataLen)
|
#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen)
|
#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr)
|
#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum)
|
#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len)
|
#endif // of #if DBG
|
|
#endif
|
|
|
#if 0
|
/* Define debug print header for every service module.*/
|
typedef struct tag_ODM_DBGP_Service_Module_Header_Name_Structure
|
{
|
const char *pMANS;
|
const char *pRTOS;
|
const char *pALM;
|
const char *pPEM;
|
const char *pCMPK;
|
const char *pRAPD;
|
const char *pTXPB;
|
const char *pQUMG;
|
}ODM_DBGP_HEAD_T;
|
|
|
/* Define different debug flag for dedicated service modules in debug flag array. */
|
// Each module has independt 32 bit debug flag you cnn define the flag as yout require.
|
typedef enum tag_ODM_DBGP_Flag_Type_Definition
|
{
|
ODM_FTX = 0,
|
ODM_FRX ,
|
ODM_FPHY ,
|
ODM_FPWR ,
|
ODM_FDM ,
|
ODM_FC2H ,
|
ODM_FBT ,
|
ODM_DBGP_TYPE_MAX
|
}ODM_DBGP_FLAG_E;
|
|
|
// Define TX relative debug bit --> FTX
|
#define ODM_TX_DESC BIT0
|
#define ODM_TX_DESC_TID BIT1
|
#define ODM_TX_PATH BIT2
|
|
// Define RX relative debug bit --> FRX
|
#define ODM_RX_DATA BIT0
|
#define ODM_RX_PHY_STS BIT1
|
#define ODM_RX_PHY_SS BIT2
|
#define ODM_RX_PHY_SQ BIT3
|
#define ODM_RX_PHY_ASTS BIT4
|
#define ODM_RX_ERR_LEN BIT5
|
#define ODM_RX_DEFRAG BIT6
|
#define ODM_RX_ERR_RATE BIT7
|
#define ODM_RX_PATH BIT8
|
#define ODM_RX_BEACON BIT9
|
|
// Define PHY-BB/RF/MAC check module bit --> FPHY
|
#define ODM_PHY_BBR BIT0
|
#define ODM_PHY_BBW BIT1
|
#define ODM_PHY_RFR BIT2
|
#define ODM_PHY_RFW BIT3
|
#define ODM_PHY_MACR BIT4
|
#define ODM_PHY_MACW BIT5
|
#define ODM_PHY_ALLR BIT6
|
#define ODM_PHY_ALLW BIT7
|
#define ODM_PHY_TXPWR BIT8
|
#define ODM_PHY_PWRDIFF BIT9
|
#define ODM_PHY_SICR BIT10
|
#define ODM_PHY_SICW BIT11
|
|
|
|
|
extern u4Byte ODM_GlobalDebugLevel;
|
|
|
#if DBG
|
extern u8Byte ODM_GlobalDebugComponents;
|
#endif
|
#endif
|
#if 0
|
|
//-----------------------------------------------------------------------------
|
// Define the debug levels
|
//
|
// 1. DBG_TRACE and DBG_LOUD are used for normal cases.
|
// So that, they can help SW engineer to develope or trace states changed
|
// and also help HW enginner to trace every operation to and from HW,
|
// e.g IO, Tx, Rx.
|
//
|
// 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases,
|
// which help us to debug SW or HW.
|
//
|
//-----------------------------------------------------------------------------
|
//
|
// Never used in a call to ODM_RT_TRACE(pDM_Odm,)!
|
//
|
#define DBG_OFF 0
|
|
//
|
// Deprecated! Don't use it!
|
// TODO: fix related debug message!
|
//
|
//#define DBG_SEC 1
|
|
//
|
// Fatal bug.
|
// For example, Tx/Rx/IO locked up, OS hangs, memory access violation,
|
// resource allocation failed, unexpected HW behavior, HW BUG and so on.
|
//
|
#define DBG_SERIOUS 2
|
|
//
|
// Abnormal, rare, or unexpeted cases.
|
// For example, IRP/Packet/OID canceled, device suprisely unremoved and so on.
|
//
|
#define DBG_WARNING 3
|
|
//
|
// Normal case with useful information about current SW or HW state.
|
// For example, Tx/Rx descriptor to fill, Tx/Rx descriptor completed status,
|
// SW protocol state change, dynamic mechanism state change and so on.
|
//
|
#define DBG_LOUD 4
|
|
//
|
// Normal case with detail execution flow or information.
|
//
|
#define DBG_TRACE 5
|
|
|
|
//-----------------------------------------------------------------------------
|
// Define the tracing components
|
//
|
//-----------------------------------------------------------------------------
|
#define COMP_TRACE BIT0 // For function call tracing.
|
#define COMP_DBG BIT1 // Only for temporary debug message.
|
#define COMP_INIT BIT2 // during driver initialization / halt / reset.
|
#define COMP_OID_QUERY BIT3 // Query OID.
|
#define COMP_OID_SET BIT4 // Set OID.
|
#define COMP_RECV BIT5 // Reveive part data path.
|
#define COMP_SEND BIT6 // Send part path.
|
#define COMP_IO BIT7 // I/O Related. Added by Annie, 2006-03-02.
|
#define COMP_POWER BIT8 // 802.11 Power Save mode or System/Device Power state related.
|
#define COMP_MLME BIT9 // 802.11 link related: join/start BSS, leave BSS.
|
#define COMP_SCAN BIT10 // For site survey.
|
#define COMP_SYSTEM BIT11 // For general platform function.
|
#define COMP_SEC BIT12 // For Security.
|
#define COMP_AP BIT13 // For AP mode related.
|
#define COMP_TURBO BIT14 // For Turbo Mode related. By Annie, 2005-10-21.
|
#define COMP_QOS BIT15 // For QoS.
|
#define COMP_AUTHENTICATOR BIT16 // For AP mode Authenticator. Added by Annie, 2006-01-30.
|
#define COMP_BEACON BIT17 // For Beacon related, by rcnjko.
|
#define COMP_ANTENNA BIT18 // For Antenna diversity related, by rcnjko.
|
#define COMP_RATE BIT19 // For Rate Adaptive mechanism, 2006.07.02, by rcnjko. #define COMP_EVENTS 0x00000080 // Event handling
|
#define COMP_EVENTS BIT20 // Event handling
|
#define COMP_FPGA BIT21 // For FPGA verfication
|
#define COMP_RM BIT22 // For Radio Measurement.
|
#define COMP_MP BIT23 // For mass production test, by shien chang, 2006.07.13
|
#define COMP_RXDESC BIT24 // Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15.
|
#define COMP_CKIP BIT25 // For CCX 1 S13: CKIP. Added by Annie, 2006-08-14.
|
#define COMP_DIG BIT26 // For DIG, 2006.09.25, by rcnjko.
|
#define COMP_TXAGC BIT27 // For Tx power, 060928, by rcnjko.
|
#define COMP_HIPWR BIT28 // For High Power Mechanism, 060928, by rcnjko.
|
#define COMP_HALDM BIT29 // For HW Dynamic Mechanism, 061010, by rcnjko.
|
#define COMP_RSNA BIT30 // For RSNA IBSS , 061201, by CCW.
|
#define COMP_INDIC BIT31 // For link indication
|
#define COMP_LED BIT32 // For LED.
|
#define COMP_RF BIT33 // For RF.
|
//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
|
//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|
#define COMP_HT BIT34 // For 802.11n HT related information. by Emily 2006-8-11
|
#define COMP_POWER_TRACKING BIT35 //FOR 8190 TX POWER TRACKING
|
#define COMP_RX_REORDER BIT36 // 8190 Rx Reorder
|
#define COMP_AMSDU BIT37 // For A-MSDU Debugging
|
#define COMP_WPS BIT38 //WPS Debug Message
|
#define COMP_RATR BIT39
|
#define COMP_RESET BIT40
|
// For debug command to print on dbgview!!
|
#define COMP_CMD BIT41
|
#define COMP_EFUSE BIT42
|
#define COMP_MESH_INTERWORKING BIT43
|
#define COMP_CCX BIT44 //CCX Debug Flag
|
#define COMP_IOCTL BIT45 // IO Control
|
#define COMP_GP BIT46 // For generic parser.
|
#define COMP_TXAGG BIT47
|
#define COMP_HVL BIT48 // For Ndis 6.2 Context Swirch and Hardware Virtualiztion Layer
|
#define COMP_TEST BIT49
|
#define COMP_BB_POWERSAVING BIT50
|
#define COMP_SWAS BIT51 // For SW Antenna Switch
|
#define COMP_P2P BIT52
|
#define COMP_MUX BIT53
|
#define COMP_FUNC BIT54
|
#define COMP_TDLS BIT55
|
#define COMP_OMNIPEEK BIT56
|
#define COMP_DUALMACSWITCH BIT60 // 2010/12/27 Add for Dual mac mode debug
|
#define COMP_EASY_CONCURRENT BIT61 // 2010/12/27 Add for easy cncurrent mode debug
|
#define COMP_PSD BIT63 //2011/3/9 Add for WLAN PSD for BT AFH
|
|
#define COMP_DFS BIT62
|
|
#define COMP_ALL UINT64_C(0xFFFFFFFFFFFFFFFF) // All components
|
// For debug print flag to use
|
/*------------------------------Define structure----------------------------*/
|
/* 2007/07/13 MH *//*------For DeBuG Print modeue------*/
|
|
/* Defnie structure to store different debug flag variable. Every debug flag
|
is a UINT32 integer and you can assign 32 different events. */
|
typedef struct tag_DBGP_Debug_Flag_Structure
|
{
|
u4Byte Mans; /* Main Scheduler module. */
|
u4Byte Rtos; /* RTOS module. */
|
u4Byte Alarm; /* Alarm module. */
|
u4Byte Pm; /* Performance monitor module. */
|
}DBGP_FLAG_T;
|
|
/* Define debug print header for every service module.*/
|
typedef struct tag_DBGP_Service_Module_Header_Name_Structure
|
{
|
const char *pMANS;
|
const char *pRTOS;
|
const char *pALM;
|
const char *pPEM;
|
const char *pCMPK;
|
const char *pRAPD;
|
const char *pTXPB;
|
const char *pQUMG;
|
}DBGP_HEAD_T;
|
|
|
/* Define different debug flag for dedicated service modules in debug flag array. */
|
// Each module has independt 32 bit debug flag you cnn define the flag as yout require.
|
typedef enum tag_DBGP_Flag_Type_Definition
|
{
|
FQoS = 0,
|
FTX = 1,
|
FRX = 2,
|
FSEC = 3,
|
FMGNT = 4,
|
FMLME = 5,
|
FRESOURCE = 6,
|
FBEACON = 7,
|
FISR = 8,
|
FPHY = 9,
|
FMP = 10,
|
FEEPROM = 11,
|
FPWR = 12,
|
FDM = 13,
|
FDBG_CTRL = 14,
|
FC2H = 15,
|
FBT = 16,
|
FINIT = 17,
|
FIOCTL = 18,
|
FSHORT_CUT = 19,
|
DBGP_TYPE_MAX
|
}DBGP_FLAG_E;
|
|
|
// Define Qos Relative debug flag bit --> FQoS
|
#define QoS_INIT BIT0
|
#define QoS_VISTA BIT1
|
|
// Define TX relative debug bit --> FTX
|
#define TX_DESC BIT0
|
#define TX_DESC_TID BIT1
|
#define TX_PATH BIT2
|
|
// Define RX relative debug bit --> FRX
|
#define RX_DATA BIT0
|
#define RX_PHY_STS BIT1
|
#define RX_PHY_SS BIT2
|
#define RX_PHY_SQ BIT3
|
#define RX_PHY_ASTS BIT4
|
#define RX_ERR_LEN BIT5
|
#define RX_DEFRAG BIT6
|
#define RX_ERR_RATE BIT7
|
#define RX_PATH BIT8
|
#define RX_BEACON BIT9
|
|
// Define Security relative debug bit --> FSEC
|
|
// Define MGNT relative debug bit --> FMGNT
|
|
// Define MLME relative debug bit --> FMLME
|
#define MEDIA_STS BIT0
|
#define LINK_STS BIT1
|
|
// Define OS resource check module bit --> FRESOURCE
|
#define OS_CHK BIT0
|
|
// Define beacon content check module bit --> FBEACON
|
#define BCN_SHOW BIT0
|
#define BCN_PEER BIT1
|
|
// Define ISR/IMR check module bit --> FISR
|
#define ISR_CHK BIT0
|
|
// Define PHY-BB/RF/MAC check module bit --> FPHY
|
#define PHY_BBR BIT0
|
#define PHY_BBW BIT1
|
#define PHY_RFR BIT2
|
#define PHY_RFW BIT3
|
#define PHY_MACR BIT4
|
#define PHY_MACW BIT5
|
#define PHY_ALLR BIT6
|
#define PHY_ALLW BIT7
|
#define PHY_TXPWR BIT8
|
#define PHY_PWRDIFF BIT9
|
#define PHY_SICR BIT10
|
#define PHY_SICW BIT11
|
|
// Define MPT driver check module bit --> FMP
|
#define MP_RX BIT0
|
#define MP_SWICH_CH BIT1
|
|
// Define EEPROM and EFUSE check module bit --> FEEPROM
|
#define EEPROM_W BIT0
|
#define EFUSE_PG BIT1
|
#define EFUSE_READ_ALL BIT2
|
#define EFUSE_ANALYSIS BIT3
|
#define EFUSE_PG_DETAIL BIT4
|
|
// Define power save check module bit --> FPWR
|
#define LPS BIT0
|
#define IPS BIT1
|
#define PWRSW BIT2
|
#define PWRHW BIT3
|
#define PWRHAL BIT4
|
|
// Define Dynamic Mechanism check module bit --> FDM
|
#define WA_IOT BIT0
|
#define DM_PWDB BIT1
|
#define DM_Monitor BIT2
|
#define DM_DIG BIT3
|
#define DM_EDCA_Turbo BIT4
|
#define DM_BT30 BIT5
|
|
// Define Dbg Control module bit --> FDBG_CTRL
|
#define DBG_CTRL_TRACE BIT0
|
#define DBG_CTRL_INBAND_NOISE BIT1
|
|
// Define FW C2H Cmd check module bit --> FC2H
|
#define C2H_Summary BIT0
|
#define C2H_PacketData BIT1
|
#define C2H_ContentData BIT2
|
// Define BT Cmd check module bit --> FBT
|
#define BT_TRACE BIT0
|
#define BT_RFPoll BIT1
|
|
// Define init check for module bit --> FINIT
|
#define INIT_EEPROM BIT0
|
#define INIT_TxPower BIT1
|
#define INIT_IQK BIT2
|
#define INIT_RF BIT3
|
|
// Define IOCTL Cmd check module bit --> FIOCTL
|
// section 1 : IRP related
|
#define IOCTL_IRP BIT0
|
#define IOCTL_IRP_DETAIL BIT1
|
#define IOCTL_IRP_STATISTICS BIT2
|
#define IOCTL_IRP_HANDLE BIT3
|
// section 2 : HCI command/event
|
#define IOCTL_BT_HCICMD BIT8
|
#define IOCTL_BT_HCICMD_DETAIL BIT9
|
#define IOCTL_BT_HCICMD_EXT BIT10
|
#define IOCTL_BT_EVENT BIT11
|
#define IOCTL_BT_EVENT_DETAIL BIT12
|
#define IOCTL_BT_EVENT_PERIODICAL BIT13
|
// section 3 : BT tx/rx data and throughput
|
#define IOCTL_BT_TX_ACLDATA BIT16
|
#define IOCTL_BT_TX_ACLDATA_DETAIL BIT17
|
#define IOCTL_BT_RX_ACLDATA BIT18
|
#define IOCTL_BT_RX_ACLDATA_DETAIL BIT19
|
#define IOCTL_BT_TP BIT20
|
// section 4 : BT connection state machine.
|
#define IOCTL_STATE BIT21
|
#define IOCTL_BT_LOGO BIT22
|
// section 5 : BT function trace
|
#define IOCTL_CALLBACK_FUN BIT24
|
#define IOCTL_PARSE_BT_PKT BIT25
|
#define IOCTL_BT_TX_PKT BIT26
|
#define IOCTL_BT_FLAG_MON BIT27
|
|
//
|
// Define init check for module bit --> FSHORT_CUT
|
// 2011/07/20 MH Add for short but definition.
|
//
|
#define SHCUT_TX BIT0
|
#define SHCUT_RX BIT1
|
|
|
/* 2007/07/13 MH *//*------For DeBuG Print modeue------*/
|
/*------------------------------Define structure----------------------------*/
|
|
|
/*------------------------Export Marco Definition---------------------------*/
|
#if (DM_ODM_SUPPORT_TYPE != ODM_WIN)
|
#define RT_PRINTK(fmt, args...) printk( "%s(): " fmt, __FUNCTION__, ## args);
|
|
#if DBG
|
#define ODM_RT_TRACE(pDM_Odm,comp, level, fmt) \
|
if(((comp) & GlobalDebugComponents) && (level <= GlobalDebugLevel)) \
|
{ \
|
RT_PRINTK fmt; \
|
}
|
|
#define RT_TRACE_F(comp, level, fmt) \
|
if(((comp) & GlobalDebugComponents) && (level <= GlobalDebugLevel)) \
|
{ \
|
RT_PRINTK fmt; \
|
}
|
|
#define RT_ASSERT(expr,fmt) \
|
if(!(expr)) { \
|
printk( "Assertion failed! %s at ......\n", #expr); \
|
printk( " ......%s,%s,line=%d\n",__FILE__,__FUNCTION__,__LINE__); \
|
}
|
#define dbg_enter() { printk("==> %s\n", __FUNCTION__); }
|
#define dbg_exit() { printk("<== %s\n", __FUNCTION__); }
|
#define dbg_trace(str) { printk("%s:%s\n", __FUNCTION__, str); }
|
#else
|
#define ODM_RT_TRACE(pDM_Odm,comp, level, fmt)
|
#define RT_TRACE_F(comp, level, fmt)
|
#define RT_ASSERT(expr, fmt)
|
#define dbg_enter()
|
#define dbg_exit()
|
#define dbg_trace(str)
|
#endif
|
|
#if DBG
|
#define DbgPrint printk
|
|
#define PRINT_DATA(_TitleString, _HexData, _HexDataLen) \
|
{ \
|
char *szTitle = _TitleString; \
|
pu1Byte pbtHexData = _HexData; \
|
u4Byte u4bHexDataLen = _HexDataLen; \
|
u4Byte __i; \
|
DbgPrint("%s", szTitle); \
|
for (__i=0;__i<u4bHexDataLen;__i++) \
|
{ \
|
if ((__i & 15) == 0) \
|
{ \
|
DbgPrint("\n"); \
|
} \
|
DbgPrint("%02X%s", pbtHexData[__i], ( ((__i&3)==3) ? " " : " ") ); \
|
} \
|
DbgPrint("\n"); \
|
}
|
|
// RT_PRINT_XXX macros: implemented for debugging purpose.
|
// Added by Annie, 2005-11-21.
|
#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) \
|
if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \
|
{ \
|
int __i; \
|
pu1Byte ptr = (pu1Byte)_HexData; \
|
DbgPrint("Rtl819x: "); \
|
DbgPrint(_TitleString); \
|
for( __i=0; __i<(int)_HexDataLen; __i++ ) \
|
{ \
|
DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" "); \
|
if (((__i + 1) % 16) == 0) DbgPrint("\n"); \
|
} \
|
DbgPrint("\n"); \
|
}
|
|
#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr) \
|
if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \
|
{ \
|
int __i; \
|
pu1Byte ptr = (pu1Byte)_Ptr; \
|
DbgPrint("Rtl819x: "); \
|
DbgPrint(_TitleString); \
|
DbgPrint(" "); \
|
for( __i=0; __i<6; __i++ ) \
|
DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-"); \
|
DbgPrint("\n"); \
|
}
|
|
#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum) \
|
if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \
|
{ \
|
int __i, __j; \
|
pu1Byte ptr = (pu1Byte)_Ptr; \
|
DbgPrint("Rtl819x: "); \
|
DbgPrint(_TitleString); \
|
DbgPrint("\n"); \
|
for( __i=0; __i<(int)_AddNum; __i++ ) \
|
{ \
|
for( __j=0; __j<6; __j++ ) \
|
DbgPrint("%02X%s", ptr[__i*6+__j], (__j==5)?"":"-"); \
|
DbgPrint("\n"); \
|
} \
|
}
|
|
// Added by Annie, 2005-11-22.
|
#define MAX_STR_LEN 64
|
#define PRINTABLE(_ch) (_ch>=' ' &&_ch<='~' ) // I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.
|
|
#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) \
|
if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \
|
{ \
|
int __i; \
|
u1Byte buffer[MAX_STR_LEN]; \
|
int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \
|
PlatformZeroMemory( buffer, MAX_STR_LEN ); \
|
PlatformMoveMemory( buffer, (pu1Byte)_Ptr, length ); \
|
for( __i=0; __i<MAX_STR_LEN; __i++ ) \
|
{ \
|
if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \
|
} \
|
buffer[length] = '\0'; \
|
DbgPrint("Rtl819x: "); \
|
DbgPrint(_TitleString); \
|
DbgPrint(": %d, <%s>\n", _Len, buffer); \
|
}
|
|
#else // of #if DBG
|
#define DbgPrint(...)
|
#define PRINT_DATA(_TitleString, _HexData, _HexDataLen)
|
#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen)
|
#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr)
|
#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum)
|
#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len)
|
#endif // of #if DBG
|
|
|
|
#endif // #if (DM_ODM_SUPPORT_TYPE != ODM_WIN)
|
|
#define DEBUG_PRINT 1
|
|
// Please add new OS's print API by yourself
|
|
//#if (RT_PLATFORM==PLATFORM_WINDOWS)
|
#if (DEBUG_PRINT == 1) && DBG
|
#define RT_DISP(dbgtype, dbgflag, printstr)\
|
{\
|
if (DBGP_Type[dbgtype] & dbgflag)\
|
{\
|
DbgPrint printstr;\
|
}\
|
}
|
|
#define RT_DISP_ADDR(dbgtype, dbgflag, printstr, _Ptr)\
|
{\
|
if (DBGP_Type[dbgtype] & dbgflag)\
|
{\
|
int __i; \
|
pu1Byte ptr = (pu1Byte)_Ptr; \
|
DbgPrint printstr; \
|
DbgPrint(" "); \
|
for( __i=0; __i<6; __i++ ) \
|
DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-"); \
|
DbgPrint("\n"); \
|
}\
|
}
|
|
#define RT_DISP_DATA(dbgtype, dbgflag, _TitleString, _HexData, _HexDataLen)\
|
{\
|
if (DBGP_Type[dbgtype] & dbgflag)\
|
{\
|
int __i; \
|
pu1Byte ptr = (pu1Byte)_HexData; \
|
DbgPrint(_TitleString); \
|
for( __i=0; __i<(int)_HexDataLen; __i++ ) \
|
{ \
|
DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" ");\
|
if (((__i + 1) % 16) == 0) DbgPrint("\n");\
|
} \
|
DbgPrint("\n"); \
|
}\
|
}
|
|
#define FunctionIn(_comp) ODM_RT_TRACE(pDM_Odm,(_comp), DBG_LOUD, ("==========> %s\n", __FUNCTION__))
|
#define FunctionOut(_comp) ODM_RT_TRACE(pDM_Odm,(_comp), DBG_LOUD, ("<========== %s\n", __FUNCTION__))
|
|
|
#else
|
|
#define RT_DISP(dbgtype, dbgflag, printstr)
|
#define RT_DISP_ADDR(dbgtype, dbgflag, printstr, _Ptr)
|
#define RT_DISP_DATA(dbgtype, dbgflag, _TitleString, _HexData, _HexDataLen)
|
|
#define FunctionIn(_comp)
|
#define FunctionOut(_comp)
|
#endif
|
/*------------------------Export Marco Definition---------------------------*/
|
|
|
/*------------------------Export global variable----------------------------*/
|
extern u4Byte DBGP_Type[DBGP_TYPE_MAX];
|
extern DBGP_HEAD_T DBGP_Head;
|
|
/*------------------------Export global variable----------------------------*/
|
|
|
/*--------------------------Exported Function prototype---------------------*/
|
extern void DBGP_Flag_Init(void);
|
extern void DBG_PrintAllFlag(void);
|
extern void DBG_PrintAllComp(void);
|
extern void DBG_PrintFlagEvent(u1Byte DbgFlag);
|
extern void DBG_DumpMem(const u1Byte DbgComp,
|
const u1Byte DbgLevel,
|
pu1Byte pMem,
|
u2Byte Len);
|
|
/*--------------------------Exported Function prototype---------------------*/
|
|
|
|
|
|
|
|
|
|
extern u4Byte GlobalDebugLevel;
|
extern u8Byte GlobalDebugComponents;
|
|
|
#endif
|
|
|
#endif // __ODM_DBG_H__
|
