/******************************************************************************
|
*
|
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
|
*
|
* This program is free software; you can redistribute it and/or modify it
|
* under the terms of version 2 of the GNU General Public License as
|
* published by the Free Software Foundation.
|
*
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
* more details.
|
*
|
* You should have received a copy of the GNU General Public License along with
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
*
|
*
|
******************************************************************************/
|
|
#include "mp_precomp.h"
|
#include "phydm_precomp.h"
|
|
#define CALCULATE_SWINGTALBE_OFFSET(_offset, _direction, _size, _delta_thermal) \
|
do {\
|
for (_offset = 0; _offset < _size; _offset++) { \
|
\
|
if (_delta_thermal < thermal_threshold[_direction][_offset]) { \
|
\
|
if (_offset != 0)\
|
_offset--;\
|
break;\
|
} \
|
} \
|
if (_offset >= _size)\
|
_offset = _size-1;\
|
} while (0)
|
|
void configure_txpower_track(
|
struct PHY_DM_STRUCT *p_dm_odm,
|
struct _TXPWRTRACK_CFG *p_config
|
)
|
{
|
#if RTL8192E_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8192E)
|
configure_txpower_track_8192e(p_config);
|
#endif
|
#if RTL8821A_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8821)
|
configure_txpower_track_8821a(p_config);
|
#endif
|
#if RTL8812A_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8812)
|
configure_txpower_track_8812a(p_config);
|
#endif
|
#if RTL8188E_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8188E)
|
configure_txpower_track_8188e(p_config);
|
#endif
|
|
#if RTL8188F_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8188F)
|
configure_txpower_track_8188f(p_config);
|
#endif
|
|
#if RTL8723B_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8723B)
|
configure_txpower_track_8723b(p_config);
|
#endif
|
|
#if RTL8814A_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8814A)
|
configure_txpower_track_8814a(p_config);
|
#endif
|
|
#if RTL8703B_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8703B)
|
configure_txpower_track_8703b(p_config);
|
#endif
|
|
#if RTL8822B_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8822B)
|
configure_txpower_track_8822b(p_config);
|
#endif
|
|
#if RTL8723D_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8723D)
|
configure_txpower_track_8723d(p_config);
|
#endif
|
|
#if RTL8821C_SUPPORT
|
if (p_dm_odm->support_ic_type == ODM_RTL8821C)
|
configure_txpower_track_8821c(p_config);
|
#endif
|
|
}
|
|
/* **********************************************************************
|
* <20121113, Kordan> This function should be called when tx_agc changed.
|
* Otherwise the previous compensation is gone, because we record the
|
* delta of temperature between two TxPowerTracking watch dogs.
|
*
|
* NOTE: If Tx BB swing or Tx scaling is varified during run-time, still
|
* need to call this function.
|
* ********************************************************************** */
|
void
|
odm_clear_txpowertracking_state(
|
struct PHY_DM_STRUCT *p_dm_odm
|
)
|
{
|
PHAL_DATA_TYPE p_hal_data = GET_HAL_DATA(p_dm_odm->adapter);
|
u8 p = 0;
|
struct odm_rf_calibration_structure *p_rf_calibrate_info = &(p_dm_odm->rf_calibrate_info);
|
|
p_rf_calibrate_info->bb_swing_idx_cck_base = p_rf_calibrate_info->default_cck_index;
|
p_rf_calibrate_info->bb_swing_idx_cck = p_rf_calibrate_info->default_cck_index;
|
p_rf_calibrate_info->CCK_index = 0;
|
|
for (p = ODM_RF_PATH_A; p < MAX_RF_PATH; ++p) {
|
p_rf_calibrate_info->bb_swing_idx_ofdm_base[p] = p_rf_calibrate_info->default_ofdm_index;
|
p_rf_calibrate_info->bb_swing_idx_ofdm[p] = p_rf_calibrate_info->default_ofdm_index;
|
p_rf_calibrate_info->OFDM_index[p] = p_rf_calibrate_info->default_ofdm_index;
|
|
p_rf_calibrate_info->power_index_offset[p] = 0;
|
p_rf_calibrate_info->delta_power_index[p] = 0;
|
p_rf_calibrate_info->delta_power_index_last[p] = 0;
|
|
p_rf_calibrate_info->absolute_ofdm_swing_idx[p] = 0; /* Initial Mix mode power tracking*/
|
p_rf_calibrate_info->remnant_ofdm_swing_idx[p] = 0;
|
p_rf_calibrate_info->kfree_offset[p] = 0;
|
}
|
|
p_rf_calibrate_info->modify_tx_agc_flag_path_a = false; /*Initial at Modify Tx Scaling mode*/
|
p_rf_calibrate_info->modify_tx_agc_flag_path_b = false; /*Initial at Modify Tx Scaling mode*/
|
p_rf_calibrate_info->modify_tx_agc_flag_path_c = false; /*Initial at Modify Tx Scaling mode*/
|
p_rf_calibrate_info->modify_tx_agc_flag_path_d = false; /*Initial at Modify Tx Scaling mode*/
|
p_rf_calibrate_info->remnant_cck_swing_idx = 0;
|
p_rf_calibrate_info->thermal_value = p_hal_data->eeprom_thermal_meter;
|
|
p_rf_calibrate_info->modify_tx_agc_value_cck = 0; /* modify by Mingzhi.Guo */
|
p_rf_calibrate_info->modify_tx_agc_value_ofdm = 0; /* modify by Mingzhi.Guo */
|
|
}
|
|
void
|
odm_txpowertracking_callback_thermal_meter(
|
#if (DM_ODM_SUPPORT_TYPE & ODM_AP)
|
struct PHY_DM_STRUCT *p_dm_odm
|
#else
|
struct _ADAPTER *adapter
|
#endif
|
)
|
{
|
#if !(DM_ODM_SUPPORT_TYPE & ODM_AP)
|
HAL_DATA_TYPE *p_hal_data = GET_HAL_DATA(adapter);
|
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
|
struct PHY_DM_STRUCT *p_dm_odm = &p_hal_data->DM_OutSrc;
|
#elif (DM_ODM_SUPPORT_TYPE == ODM_CE)
|
struct PHY_DM_STRUCT *p_dm_odm = &p_hal_data->odmpriv;
|
#endif
|
#endif
|
|
struct odm_rf_calibration_structure *p_rf_calibrate_info = &(p_dm_odm->rf_calibrate_info);
|
|
u8 thermal_value = 0, delta, delta_LCK, delta_IQK, p = 0, i = 0;
|
s8 diff_DPK[4] = {0};
|
u8 thermal_value_avg_count = 0;
|
u32 thermal_value_avg = 0, regc80, regcd0, regcd4, regab4;
|
|
u8 OFDM_min_index = 0; /* OFDM BB Swing should be less than +3.0dB, which is required by Arthur */
|
u8 indexforchannel = 0; /* get_right_chnl_place_for_iqk(p_hal_data->current_channel) */
|
u8 power_tracking_type = p_hal_data->RfPowerTrackingType;
|
u8 xtal_offset_eanble = 0;
|
|
struct _TXPWRTRACK_CFG c;
|
|
/* 4 1. The following TWO tables decide the final index of OFDM/CCK swing table. */
|
u8 *delta_swing_table_idx_tup_a = NULL;
|
u8 *delta_swing_table_idx_tdown_a = NULL;
|
u8 *delta_swing_table_idx_tup_b = NULL;
|
u8 *delta_swing_table_idx_tdown_b = NULL;
|
/*for 8814 add by Yu Chen*/
|
u8 *delta_swing_table_idx_tup_c = NULL;
|
u8 *delta_swing_table_idx_tdown_c = NULL;
|
u8 *delta_swing_table_idx_tup_d = NULL;
|
u8 *delta_swing_table_idx_tdown_d = NULL;
|
/*for Xtal Offset by James.Tung*/
|
s8 *delta_swing_table_xtal_up = NULL;
|
s8 *delta_swing_table_xtal_down = NULL;
|
|
/* 4 2. Initilization ( 7 steps in total ) */
|
|
configure_txpower_track(p_dm_odm, &c);
|
|
(*c.get_delta_swing_table)(p_dm_odm, (u8 **)&delta_swing_table_idx_tup_a, (u8 **)&delta_swing_table_idx_tdown_a,
|
(u8 **)&delta_swing_table_idx_tup_b, (u8 **)&delta_swing_table_idx_tdown_b);
|
|
if (p_dm_odm->support_ic_type & ODM_RTL8814A) /*for 8814 path C & D*/
|
(*c.get_delta_swing_table8814only)(p_dm_odm, (u8 **)&delta_swing_table_idx_tup_c, (u8 **)&delta_swing_table_idx_tdown_c,
|
(u8 **)&delta_swing_table_idx_tup_d, (u8 **)&delta_swing_table_idx_tdown_d);
|
|
if (p_dm_odm->support_ic_type & (ODM_RTL8703B | ODM_RTL8723D)) /*for Xtal Offset*/
|
(*c.get_delta_swing_xtal_table)(p_dm_odm, (s8 **)&delta_swing_table_xtal_up, (s8 **)&delta_swing_table_xtal_down);
|
|
|
p_rf_calibrate_info->txpowertracking_callback_cnt++; /*cosa add for debug*/
|
p_rf_calibrate_info->is_txpowertracking_init = true;
|
|
/*p_rf_calibrate_info->txpowertrack_control = p_hal_data->txpowertrack_control;
|
<Kordan> We should keep updating the control variable according to HalData.
|
<Kordan> rf_calibrate_info.rega24 will be initialized when ODM HW configuring, but MP configures with para files. */
|
#if (DM_ODM_SUPPORT_TYPE & ODM_WIN)
|
#if (MP_DRIVER == 1)
|
p_rf_calibrate_info->rega24 = 0x090e1317;
|
#endif
|
#elif (DM_ODM_SUPPORT_TYPE & ODM_CE)
|
if (p_dm_odm->mp_mode == true)
|
p_rf_calibrate_info->rega24 = 0x090e1317;
|
#endif
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("===>odm_txpowertracking_callback_thermal_meter\n p_rf_calibrate_info->bb_swing_idx_cck_base: %d, p_rf_calibrate_info->bb_swing_idx_ofdm_base[A]: %d, p_rf_calibrate_info->default_ofdm_index: %d\n",
|
p_rf_calibrate_info->bb_swing_idx_cck_base, p_rf_calibrate_info->bb_swing_idx_ofdm_base[ODM_RF_PATH_A], p_rf_calibrate_info->default_ofdm_index));
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("p_rf_calibrate_info->txpowertrack_control=%d, p_hal_data->eeprom_thermal_meter %d\n", p_rf_calibrate_info->txpowertrack_control, p_hal_data->eeprom_thermal_meter));
|
thermal_value = (u8)odm_get_rf_reg(p_dm_odm, ODM_RF_PATH_A, c.thermal_reg_addr, 0xfc00); /* 0x42: RF Reg[15:10] 88E */
|
|
/*add log by zhao he, check c80/c94/c14/ca0 value*/
|
if (p_dm_odm->support_ic_type == ODM_RTL8723D) {
|
regc80 = odm_get_bb_reg(p_dm_odm, 0xc80, MASKDWORD);
|
regcd0 = odm_get_bb_reg(p_dm_odm, 0xcd0, MASKDWORD);
|
regcd4 = odm_get_bb_reg(p_dm_odm, 0xcd4, MASKDWORD);
|
regab4 = odm_get_bb_reg(p_dm_odm, 0xab4, 0x000007FF);
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("0xc80 = 0x%x 0xcd0 = 0x%x 0xcd4 = 0x%x 0xab4 = 0x%x\n", regc80, regcd0, regcd4, regab4));
|
}
|
|
if (!p_rf_calibrate_info->txpowertrack_control)
|
return;
|
|
|
/*4 3. Initialize ThermalValues of rf_calibrate_info*/
|
|
if (p_rf_calibrate_info->is_reloadtxpowerindex)
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("reload ofdm index for band switch\n"));
|
|
/*4 4. Calculate average thermal meter*/
|
|
p_rf_calibrate_info->thermal_value_avg[p_rf_calibrate_info->thermal_value_avg_index] = thermal_value;
|
p_rf_calibrate_info->thermal_value_avg_index++;
|
if (p_rf_calibrate_info->thermal_value_avg_index == c.average_thermal_num) /*Average times = c.average_thermal_num*/
|
p_rf_calibrate_info->thermal_value_avg_index = 0;
|
|
for (i = 0; i < c.average_thermal_num; i++) {
|
if (p_rf_calibrate_info->thermal_value_avg[i]) {
|
thermal_value_avg += p_rf_calibrate_info->thermal_value_avg[i];
|
thermal_value_avg_count++;
|
}
|
}
|
|
if (thermal_value_avg_count) { /* Calculate Average thermal_value after average enough times */
|
thermal_value = (u8)(thermal_value_avg / thermal_value_avg_count);
|
p_rf_calibrate_info->thermal_value_delta = thermal_value - p_hal_data->eeprom_thermal_meter;
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("AVG Thermal Meter = 0x%X, EFUSE Thermal base = 0x%X\n", thermal_value, p_hal_data->eeprom_thermal_meter));
|
}
|
|
/* 4 5. Calculate delta, delta_LCK, delta_IQK. */
|
|
/* "delta" here is used to determine whether thermal value changes or not. */
|
delta = (thermal_value > p_rf_calibrate_info->thermal_value) ? (thermal_value - p_rf_calibrate_info->thermal_value) : (p_rf_calibrate_info->thermal_value - thermal_value);
|
delta_LCK = (thermal_value > p_rf_calibrate_info->thermal_value_lck) ? (thermal_value - p_rf_calibrate_info->thermal_value_lck) : (p_rf_calibrate_info->thermal_value_lck - thermal_value);
|
delta_IQK = (thermal_value > p_rf_calibrate_info->thermal_value_iqk) ? (thermal_value - p_rf_calibrate_info->thermal_value_iqk) : (p_rf_calibrate_info->thermal_value_iqk - thermal_value);
|
|
if (p_rf_calibrate_info->thermal_value_iqk == 0xff) { /*no PG, use thermal value for IQK*/
|
p_rf_calibrate_info->thermal_value_iqk = thermal_value;
|
delta_IQK = (thermal_value > p_rf_calibrate_info->thermal_value_iqk) ? (thermal_value - p_rf_calibrate_info->thermal_value_iqk) : (p_rf_calibrate_info->thermal_value_iqk - thermal_value);
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("no PG, use thermal_value for IQK\n"));
|
}
|
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
diff_DPK[p] = (s8)thermal_value - (s8)p_rf_calibrate_info->dpk_thermal[p];
|
|
/*4 6. If necessary, do LCK.*/
|
|
if (!(p_dm_odm->support_ic_type & ODM_RTL8821)) { /*no PG, do LCK at initial status*/
|
if (p_rf_calibrate_info->thermal_value_lck == 0xff) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("no PG, do LCK\n"));
|
p_rf_calibrate_info->thermal_value_lck = thermal_value;
|
|
/*Use RTLCK, so close power tracking driver LCK*/
|
if (!(p_dm_odm->support_ic_type & ODM_RTL8814A)) {
|
if (c.phy_lc_calibrate)
|
(*c.phy_lc_calibrate)(p_dm_odm);
|
}
|
|
delta_LCK = (thermal_value > p_rf_calibrate_info->thermal_value_lck) ? (thermal_value - p_rf_calibrate_info->thermal_value_lck) : (p_rf_calibrate_info->thermal_value_lck - thermal_value);
|
}
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("(delta, delta_LCK, delta_IQK) = (%d, %d, %d)\n", delta, delta_LCK, delta_IQK));
|
|
/* Delta temperature is equal to or larger than 20 centigrade.*/
|
if (delta_LCK >= c.threshold_iqk) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("delta_LCK(%d) >= threshold_iqk(%d)\n", delta_LCK, c.threshold_iqk));
|
p_rf_calibrate_info->thermal_value_lck = thermal_value;
|
|
/*Use RTLCK, so close power tracking driver LCK*/
|
if (!(p_dm_odm->support_ic_type & ODM_RTL8814A)) {
|
if (c.phy_lc_calibrate)
|
(*c.phy_lc_calibrate)(p_dm_odm);
|
}
|
}
|
}
|
|
/*3 7. If necessary, move the index of swing table to adjust Tx power.*/
|
|
if (delta > 0 && p_rf_calibrate_info->txpowertrack_control) {
|
/* "delta" here is used to record the absolute value of differrence. */
|
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN | ODM_CE))
|
delta = thermal_value > p_hal_data->eeprom_thermal_meter ? (thermal_value - p_hal_data->eeprom_thermal_meter) : (p_hal_data->eeprom_thermal_meter - thermal_value);
|
#else
|
delta = (thermal_value > p_dm_odm->priv->pmib->dot11RFEntry.ther) ? (thermal_value - p_dm_odm->priv->pmib->dot11RFEntry.ther) : (p_dm_odm->priv->pmib->dot11RFEntry.ther - thermal_value);
|
#endif
|
if (delta >= TXPWR_TRACK_TABLE_SIZE)
|
delta = TXPWR_TRACK_TABLE_SIZE - 1;
|
|
/*4 7.1 The Final Power index = BaseIndex + power_index_offset*/
|
|
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN | ODM_CE))
|
if (thermal_value > p_hal_data->eeprom_thermal_meter) {
|
#else
|
if (thermal_value > p_dm_odm->priv->pmib->dot11RFEntry.ther) {
|
#endif
|
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++) {
|
p_rf_calibrate_info->delta_power_index_last[p] = p_rf_calibrate_info->delta_power_index[p]; /*recording poer index offset*/
|
switch (p) {
|
case ODM_RF_PATH_B:
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("delta_swing_table_idx_tup_b[%d] = %d\n", delta, delta_swing_table_idx_tup_b[delta]));
|
|
p_rf_calibrate_info->delta_power_index[p] = delta_swing_table_idx_tup_b[delta];
|
p_rf_calibrate_info->absolute_ofdm_swing_idx[p] = delta_swing_table_idx_tup_b[delta]; /*Record delta swing for mix mode power tracking*/
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("******Temp is higher and p_rf_calibrate_info->absolute_ofdm_swing_idx[ODM_RF_PATH_B] = %d\n", p_rf_calibrate_info->absolute_ofdm_swing_idx[p]));
|
break;
|
|
case ODM_RF_PATH_C:
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("delta_swing_table_idx_tup_c[%d] = %d\n", delta, delta_swing_table_idx_tup_c[delta]));
|
|
p_rf_calibrate_info->delta_power_index[p] = delta_swing_table_idx_tup_c[delta];
|
p_rf_calibrate_info->absolute_ofdm_swing_idx[p] = delta_swing_table_idx_tup_c[delta]; /*Record delta swing for mix mode power tracking*/
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("******Temp is higher and p_rf_calibrate_info->absolute_ofdm_swing_idx[ODM_RF_PATH_C] = %d\n", p_rf_calibrate_info->absolute_ofdm_swing_idx[p]));
|
break;
|
|
case ODM_RF_PATH_D:
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("delta_swing_table_idx_tup_d[%d] = %d\n", delta, delta_swing_table_idx_tup_d[delta]));
|
|
p_rf_calibrate_info->delta_power_index[p] = delta_swing_table_idx_tup_d[delta];
|
p_rf_calibrate_info->absolute_ofdm_swing_idx[p] = delta_swing_table_idx_tup_d[delta]; /*Record delta swing for mix mode power tracking*/
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("******Temp is higher and p_rf_calibrate_info->absolute_ofdm_swing_idx[ODM_RF_PATH_D] = %d\n", p_rf_calibrate_info->absolute_ofdm_swing_idx[p]));
|
break;
|
|
default:
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("delta_swing_table_idx_tup_a[%d] = %d\n", delta, delta_swing_table_idx_tup_a[delta]));
|
|
p_rf_calibrate_info->delta_power_index[p] = delta_swing_table_idx_tup_a[delta];
|
p_rf_calibrate_info->absolute_ofdm_swing_idx[p] = delta_swing_table_idx_tup_a[delta]; /*Record delta swing for mix mode power tracking*/
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("******Temp is higher and p_rf_calibrate_info->absolute_ofdm_swing_idx[ODM_RF_PATH_A] = %d\n", p_rf_calibrate_info->absolute_ofdm_swing_idx[p]));
|
break;
|
}
|
}
|
|
if (p_dm_odm->support_ic_type & (ODM_RTL8703B | ODM_RTL8723D)) {
|
/*Save xtal_offset from Xtal table*/
|
p_rf_calibrate_info->xtal_offset_last = p_rf_calibrate_info->xtal_offset; /*recording last Xtal offset*/
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("[Xtal] delta_swing_table_xtal_up[%d] = %d\n", delta, delta_swing_table_xtal_up[delta]));
|
p_rf_calibrate_info->xtal_offset = delta_swing_table_xtal_up[delta];
|
|
if (p_rf_calibrate_info->xtal_offset_last == p_rf_calibrate_info->xtal_offset)
|
xtal_offset_eanble = 0;
|
else
|
xtal_offset_eanble = 1;
|
}
|
|
} else {
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++) {
|
p_rf_calibrate_info->delta_power_index_last[p] = p_rf_calibrate_info->delta_power_index[p]; /*recording poer index offset*/
|
|
switch (p) {
|
case ODM_RF_PATH_B:
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("delta_swing_table_idx_tdown_b[%d] = %d\n", delta, delta_swing_table_idx_tdown_b[delta]));
|
p_rf_calibrate_info->delta_power_index[p] = -1 * delta_swing_table_idx_tdown_b[delta];
|
p_rf_calibrate_info->absolute_ofdm_swing_idx[p] = -1 * delta_swing_table_idx_tdown_b[delta]; /*Record delta swing for mix mode power tracking*/
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("******Temp is lower and p_rf_calibrate_info->absolute_ofdm_swing_idx[ODM_RF_PATH_B] = %d\n", p_rf_calibrate_info->absolute_ofdm_swing_idx[p]));
|
break;
|
|
case ODM_RF_PATH_C:
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("delta_swing_table_idx_tdown_c[%d] = %d\n", delta, delta_swing_table_idx_tdown_c[delta]));
|
p_rf_calibrate_info->delta_power_index[p] = -1 * delta_swing_table_idx_tdown_c[delta];
|
p_rf_calibrate_info->absolute_ofdm_swing_idx[p] = -1 * delta_swing_table_idx_tdown_c[delta]; /*Record delta swing for mix mode power tracking*/
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("******Temp is lower and p_rf_calibrate_info->absolute_ofdm_swing_idx[ODM_RF_PATH_C] = %d\n", p_rf_calibrate_info->absolute_ofdm_swing_idx[p]));
|
break;
|
|
case ODM_RF_PATH_D:
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("delta_swing_table_idx_tdown_d[%d] = %d\n", delta, delta_swing_table_idx_tdown_d[delta]));
|
p_rf_calibrate_info->delta_power_index[p] = -1 * delta_swing_table_idx_tdown_d[delta];
|
p_rf_calibrate_info->absolute_ofdm_swing_idx[p] = -1 * delta_swing_table_idx_tdown_d[delta]; /*Record delta swing for mix mode power tracking*/
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("******Temp is lower and p_rf_calibrate_info->absolute_ofdm_swing_idx[ODM_RF_PATH_D] = %d\n", p_rf_calibrate_info->absolute_ofdm_swing_idx[p]));
|
break;
|
|
default:
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("delta_swing_table_idx_tdown_a[%d] = %d\n", delta, delta_swing_table_idx_tdown_a[delta]));
|
p_rf_calibrate_info->delta_power_index[p] = -1 * delta_swing_table_idx_tdown_a[delta];
|
p_rf_calibrate_info->absolute_ofdm_swing_idx[p] = -1 * delta_swing_table_idx_tdown_a[delta]; /*Record delta swing for mix mode power tracking*/
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("******Temp is lower and p_rf_calibrate_info->absolute_ofdm_swing_idx[ODM_RF_PATH_A] = %d\n", p_rf_calibrate_info->absolute_ofdm_swing_idx[p]));
|
break;
|
}
|
}
|
|
if (p_dm_odm->support_ic_type & (ODM_RTL8703B | ODM_RTL8723D)) {
|
/*Save xtal_offset from Xtal table*/
|
p_rf_calibrate_info->xtal_offset_last = p_rf_calibrate_info->xtal_offset; /*recording last Xtal offset*/
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("[Xtal] delta_swing_table_xtal_down[%d] = %d\n", delta, delta_swing_table_xtal_down[delta]));
|
p_rf_calibrate_info->xtal_offset = delta_swing_table_xtal_down[delta];
|
|
if (p_rf_calibrate_info->xtal_offset_last == p_rf_calibrate_info->xtal_offset)
|
xtal_offset_eanble = 0;
|
else
|
xtal_offset_eanble = 1;
|
}
|
|
}
|
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("\n\n=========================== [path-%d] Calculating power_index_offset===========================\n", p));
|
|
if (p_rf_calibrate_info->delta_power_index[p] == p_rf_calibrate_info->delta_power_index_last[p]) /*If Thermal value changes but lookup table value still the same*/
|
p_rf_calibrate_info->power_index_offset[p] = 0;
|
else
|
p_rf_calibrate_info->power_index_offset[p] = p_rf_calibrate_info->delta_power_index[p] - p_rf_calibrate_info->delta_power_index_last[p]; /*Power index diff between 2 times Power Tracking*/
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("[path-%d] power_index_offset(%d) = delta_power_index(%d) - delta_power_index_last(%d)\n", p, p_rf_calibrate_info->power_index_offset[p], p_rf_calibrate_info->delta_power_index[p], p_rf_calibrate_info->delta_power_index_last[p]));
|
|
p_rf_calibrate_info->OFDM_index[p] = p_rf_calibrate_info->bb_swing_idx_ofdm_base[p] + p_rf_calibrate_info->power_index_offset[p];
|
p_rf_calibrate_info->CCK_index = p_rf_calibrate_info->bb_swing_idx_cck_base + p_rf_calibrate_info->power_index_offset[p];
|
|
p_rf_calibrate_info->bb_swing_idx_cck = p_rf_calibrate_info->CCK_index;
|
p_rf_calibrate_info->bb_swing_idx_ofdm[p] = p_rf_calibrate_info->OFDM_index[p];
|
|
/*************Print BB Swing base and index Offset*************/
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("The 'CCK' final index(%d) = BaseIndex(%d) + power_index_offset(%d)\n", p_rf_calibrate_info->bb_swing_idx_cck, p_rf_calibrate_info->bb_swing_idx_cck_base, p_rf_calibrate_info->power_index_offset[p]));
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("The 'OFDM' final index(%d) = BaseIndex[%d](%d) + power_index_offset(%d)\n", p_rf_calibrate_info->bb_swing_idx_ofdm[p], p, p_rf_calibrate_info->bb_swing_idx_ofdm_base[p], p_rf_calibrate_info->power_index_offset[p]));
|
|
/*4 7.1 Handle boundary conditions of index.*/
|
|
if (p_rf_calibrate_info->OFDM_index[p] > c.swing_table_size_ofdm - 1)
|
p_rf_calibrate_info->OFDM_index[p] = c.swing_table_size_ofdm - 1;
|
else if (p_rf_calibrate_info->OFDM_index[p] <= OFDM_min_index)
|
p_rf_calibrate_info->OFDM_index[p] = OFDM_min_index;
|
}
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("\n\n========================================================================================================\n"));
|
|
if (p_rf_calibrate_info->CCK_index > c.swing_table_size_cck - 1)
|
p_rf_calibrate_info->CCK_index = c.swing_table_size_cck - 1;
|
else if (p_rf_calibrate_info->CCK_index <= 0)
|
p_rf_calibrate_info->CCK_index = 0;
|
} else {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("The thermal meter is unchanged or TxPowerTracking OFF(%d): thermal_value: %d, p_rf_calibrate_info->thermal_value: %d\n",
|
p_rf_calibrate_info->txpowertrack_control, thermal_value, p_rf_calibrate_info->thermal_value));
|
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
p_rf_calibrate_info->power_index_offset[p] = 0;
|
}
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("TxPowerTracking: [CCK] Swing Current index: %d, Swing base index: %d\n",
|
p_rf_calibrate_info->CCK_index, p_rf_calibrate_info->bb_swing_idx_cck_base)); /*Print Swing base & current*/
|
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("TxPowerTracking: [OFDM] Swing Current index: %d, Swing base index[%d]: %d\n",
|
p_rf_calibrate_info->OFDM_index[p], p, p_rf_calibrate_info->bb_swing_idx_ofdm_base[p]));
|
}
|
|
if ((p_dm_odm->support_ic_type & ODM_RTL8814A)) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("power_tracking_type=%d\n", power_tracking_type));
|
|
if (power_tracking_type == 0) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("**********Enter POWER Tracking MIX_MODE**********\n"));
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
(*c.odm_tx_pwr_track_set_pwr)(p_dm_odm, MIX_MODE, p, 0);
|
} else if (power_tracking_type == 1) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("**********Enter POWER Tracking MIX(2G) TSSI(5G) MODE**********\n"));
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
(*c.odm_tx_pwr_track_set_pwr)(p_dm_odm, MIX_2G_TSSI_5G_MODE, p, 0);
|
} else if (power_tracking_type == 2) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("**********Enter POWER Tracking MIX(5G) TSSI(2G)MODE**********\n"));
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
(*c.odm_tx_pwr_track_set_pwr)(p_dm_odm, MIX_5G_TSSI_2G_MODE, p, 0);
|
} else if (power_tracking_type == 3) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("**********Enter POWER Tracking TSSI MODE**********\n"));
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
(*c.odm_tx_pwr_track_set_pwr)(p_dm_odm, TSSI_MODE, p, 0);
|
}
|
p_rf_calibrate_info->thermal_value = thermal_value; /*Record last Power Tracking Thermal value*/
|
|
} else if ((p_rf_calibrate_info->power_index_offset[ODM_RF_PATH_A] != 0 ||
|
p_rf_calibrate_info->power_index_offset[ODM_RF_PATH_B] != 0 ||
|
p_rf_calibrate_info->power_index_offset[ODM_RF_PATH_C] != 0 ||
|
p_rf_calibrate_info->power_index_offset[ODM_RF_PATH_D] != 0) &&
|
p_rf_calibrate_info->txpowertrack_control && (p_hal_data->eeprom_thermal_meter != 0xff)) {
|
/* 4 7.2 Configure the Swing Table to adjust Tx Power. */
|
|
p_rf_calibrate_info->is_tx_power_changed = true; /*Always true after Tx Power is adjusted by power tracking.*/
|
/* */
|
/* 2012/04/23 MH According to Luke's suggestion, we can not write BB digital */
|
/* to increase TX power. Otherwise, EVM will be bad. */
|
/* */
|
/* 2012/04/25 MH Add for tx power tracking to set tx power in tx agc for 88E. */
|
if (thermal_value > p_rf_calibrate_info->thermal_value) {
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("Temperature Increasing(%d): delta_pi: %d, delta_t: %d, Now_t: %d, EFUSE_t: %d, Last_t: %d\n",
|
p, p_rf_calibrate_info->power_index_offset[p], delta, thermal_value, p_hal_data->eeprom_thermal_meter, p_rf_calibrate_info->thermal_value));
|
}
|
} else if (thermal_value < p_rf_calibrate_info->thermal_value) { /*Low temperature*/
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++) {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("Temperature Decreasing(%d): delta_pi: %d, delta_t: %d, Now_t: %d, EFUSE_t: %d, Last_t: %d\n",
|
p, p_rf_calibrate_info->power_index_offset[p], delta, thermal_value, p_hal_data->eeprom_thermal_meter, p_rf_calibrate_info->thermal_value));
|
}
|
}
|
|
#if !(DM_ODM_SUPPORT_TYPE & ODM_AP)
|
if (thermal_value > p_hal_data->eeprom_thermal_meter)
|
#else
|
if (thermal_value > p_dm_odm->priv->pmib->dot11RFEntry.ther)
|
#endif
|
{
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("Temperature(%d) higher than PG value(%d)\n", thermal_value, p_hal_data->eeprom_thermal_meter));
|
|
if (p_dm_odm->support_ic_type == ODM_RTL8188E || p_dm_odm->support_ic_type == ODM_RTL8192E || p_dm_odm->support_ic_type == ODM_RTL8821 ||
|
p_dm_odm->support_ic_type == ODM_RTL8812 || p_dm_odm->support_ic_type == ODM_RTL8723B || p_dm_odm->support_ic_type == ODM_RTL8814A ||
|
p_dm_odm->support_ic_type == ODM_RTL8703B || p_dm_odm->support_ic_type == ODM_RTL8188F || p_dm_odm->support_ic_type == ODM_RTL8822B ||
|
p_dm_odm->support_ic_type == ODM_RTL8723D || p_dm_odm->support_ic_type == ODM_RTL8821C) {
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("**********Enter POWER Tracking MIX_MODE**********\n"));
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
(*c.odm_tx_pwr_track_set_pwr)(p_dm_odm, MIX_MODE, p, 0);
|
} else {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("**********Enter POWER Tracking BBSWING_MODE**********\n"));
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
(*c.odm_tx_pwr_track_set_pwr)(p_dm_odm, BBSWING, p, indexforchannel);
|
}
|
} else {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("Temperature(%d) lower than PG value(%d)\n", thermal_value, p_hal_data->eeprom_thermal_meter));
|
|
if (p_dm_odm->support_ic_type == ODM_RTL8188E || p_dm_odm->support_ic_type == ODM_RTL8192E || p_dm_odm->support_ic_type == ODM_RTL8821 ||
|
p_dm_odm->support_ic_type == ODM_RTL8812 || p_dm_odm->support_ic_type == ODM_RTL8723B || p_dm_odm->support_ic_type == ODM_RTL8814A ||
|
p_dm_odm->support_ic_type == ODM_RTL8703B || p_dm_odm->support_ic_type == ODM_RTL8188F || p_dm_odm->support_ic_type == ODM_RTL8822B ||
|
p_dm_odm->support_ic_type == ODM_RTL8723D || p_dm_odm->support_ic_type == ODM_RTL8821C) {
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("**********Enter POWER Tracking MIX_MODE**********\n"));
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
(*c.odm_tx_pwr_track_set_pwr)(p_dm_odm, MIX_MODE, p, indexforchannel);
|
} else {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("**********Enter POWER Tracking BBSWING_MODE**********\n"));
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
(*c.odm_tx_pwr_track_set_pwr)(p_dm_odm, BBSWING, p, indexforchannel);
|
}
|
|
}
|
|
p_rf_calibrate_info->bb_swing_idx_cck_base = p_rf_calibrate_info->bb_swing_idx_cck; /*Record last time Power Tracking result as base.*/
|
for (p = ODM_RF_PATH_A; p < c.rf_path_count; p++)
|
p_rf_calibrate_info->bb_swing_idx_ofdm_base[p] = p_rf_calibrate_info->bb_swing_idx_ofdm[p];
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("p_rf_calibrate_info->thermal_value = %d thermal_value= %d\n", p_rf_calibrate_info->thermal_value, thermal_value));
|
|
p_rf_calibrate_info->thermal_value = thermal_value; /*Record last Power Tracking Thermal value*/
|
|
}
|
|
|
if (p_dm_odm->support_ic_type == ODM_RTL8703B || p_dm_odm->support_ic_type == ODM_RTL8723D) {
|
|
if (xtal_offset_eanble != 0 && p_rf_calibrate_info->txpowertrack_control && (p_hal_data->eeprom_thermal_meter != 0xff)) {
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("**********Enter Xtal Tracking**********\n"));
|
|
#if !(DM_ODM_SUPPORT_TYPE & ODM_AP)
|
if (thermal_value > p_hal_data->eeprom_thermal_meter) {
|
#else
|
if (thermal_value > p_dm_odm->priv->pmib->dot11RFEntry.ther) {
|
#endif
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("Temperature(%d) higher than PG value(%d)\n", thermal_value, p_hal_data->eeprom_thermal_meter));
|
(*c.odm_txxtaltrack_set_xtal)(p_dm_odm);
|
} else {
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD,
|
("Temperature(%d) lower than PG value(%d)\n", thermal_value, p_hal_data->eeprom_thermal_meter));
|
(*c.odm_txxtaltrack_set_xtal)(p_dm_odm);
|
}
|
}
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("**********End Xtal Tracking**********\n"));
|
}
|
|
#if !(DM_ODM_SUPPORT_TYPE & ODM_AP)
|
|
if (!IS_HARDWARE_TYPE_8723B(adapter)) {
|
/*Delta temperature is equal to or larger than 20 centigrade (When threshold is 8).*/
|
if (delta_IQK >= c.threshold_iqk) {
|
p_rf_calibrate_info->thermal_value_iqk = thermal_value;
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("delta_IQK(%d) >= threshold_iqk(%d)\n", delta_IQK, c.threshold_iqk));
|
if (!p_rf_calibrate_info->is_iqk_in_progress)
|
(*c.do_iqk)(p_dm_odm, delta_IQK, thermal_value, 8);
|
}
|
}
|
if (p_rf_calibrate_info->dpk_thermal[ODM_RF_PATH_A] != 0) {
|
if (diff_DPK[ODM_RF_PATH_A] >= c.threshold_dpk) {
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x1);
|
odm_set_bb_reg(p_dm_odm, 0xcc4, BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10), (diff_DPK[ODM_RF_PATH_A] / c.threshold_dpk));
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x0);
|
} else if ((diff_DPK[ODM_RF_PATH_A] <= -1 * c.threshold_dpk)) {
|
s32 value = 0x20 + (diff_DPK[ODM_RF_PATH_A] / c.threshold_dpk);
|
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x1);
|
odm_set_bb_reg(p_dm_odm, 0xcc4, BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10), value);
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x0);
|
} else {
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x1);
|
odm_set_bb_reg(p_dm_odm, 0xcc4, BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10), 0);
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x0);
|
}
|
}
|
if (p_rf_calibrate_info->dpk_thermal[ODM_RF_PATH_B] != 0) {
|
if (diff_DPK[ODM_RF_PATH_B] >= c.threshold_dpk) {
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x1);
|
odm_set_bb_reg(p_dm_odm, 0xec4, BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10), (diff_DPK[ODM_RF_PATH_B] / c.threshold_dpk));
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x0);
|
} else if ((diff_DPK[ODM_RF_PATH_B] <= -1 * c.threshold_dpk)) {
|
s32 value = 0x20 + (diff_DPK[ODM_RF_PATH_B] / c.threshold_dpk);
|
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x1);
|
odm_set_bb_reg(p_dm_odm, 0xec4, BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10), value);
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x0);
|
} else {
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x1);
|
odm_set_bb_reg(p_dm_odm, 0xec4, BIT(14) | BIT(13) | BIT(12) | BIT(11) | BIT(10), 0);
|
odm_set_bb_reg(p_dm_odm, 0x82c, BIT(31), 0x0);
|
}
|
}
|
|
#endif
|
|
ODM_RT_TRACE(p_dm_odm, ODM_COMP_TX_PWR_TRACK, ODM_DBG_LOUD, ("<===odm_txpowertracking_callback_thermal_meter\n"));
|
|
p_rf_calibrate_info->tx_powercount = 0;
|
}
|
|
|
|
/* 3============================================================
|
* 3 IQ Calibration
|
* 3============================================================ */
|
|
void
|
odm_reset_iqk_result(
|
struct PHY_DM_STRUCT *p_dm_odm
|
)
|
{
|
return;
|
}
|
#if !(DM_ODM_SUPPORT_TYPE & ODM_AP)
|
u8 odm_get_right_chnl_place_for_iqk(u8 chnl)
|
{
|
u8 channel_all[ODM_TARGET_CHNL_NUM_2G_5G] = {
|
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 100, 102, 104, 106, 108, 110, 112, 114, 116, 118, 120, 122, 124, 126, 128, 130, 132, 134, 136, 138, 140, 149, 151, 153, 155, 157, 159, 161, 163, 165
|
};
|
u8 place = chnl;
|
|
|
if (chnl > 14) {
|
for (place = 14; place < sizeof(channel_all); place++) {
|
if (channel_all[place] == chnl)
|
return place - 13;
|
}
|
}
|
return 0;
|
|
}
|
#endif
|
|
void
|
odm_iq_calibrate(
|
struct PHY_DM_STRUCT *p_dm_odm
|
)
|
{
|
struct _ADAPTER *adapter = p_dm_odm->adapter;
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(adapter);
|
|
RT_TRACE(COMP_SCAN, ODM_DBG_LOUD, ("=>%s\n" , __FUNCTION__));
|
|
#if (DM_ODM_SUPPORT_TYPE == ODM_WIN)
|
if (*p_dm_odm->p_is_fcs_mode_enable)
|
return;
|
#endif
|
|
if (p_dm_odm->is_linked) {
|
RT_TRACE(COMP_SCAN, ODM_DBG_LOUD, ("interval=%d ch=%d prech=%d scan=%s\n", p_dm_odm->linked_interval,
|
*p_dm_odm->p_channel, p_dm_odm->pre_channel, *p_dm_odm->p_is_scan_in_process == TRUE ? "TRUE":"FALSE"));
|
|
if (*p_dm_odm->p_channel != p_dm_odm->pre_channel) {
|
p_dm_odm->pre_channel = *p_dm_odm->p_channel;
|
p_dm_odm->linked_interval = 0;
|
}
|
|
if ((p_dm_odm->linked_interval < 3) && (!*p_dm_odm->p_is_scan_in_process))
|
p_dm_odm->linked_interval++;
|
|
if (p_dm_odm->linked_interval == 2)
|
PHY_IQCalibrate(adapter, false);
|
} else
|
p_dm_odm->linked_interval = 0;
|
|
RT_TRACE(COMP_SCAN, ODM_DBG_LOUD, ("<=%s interval=%d ch=%d prech=%d scan=%s\n", __FUNCTION__, p_dm_odm->linked_interval,
|
*p_dm_odm->p_channel, p_dm_odm->pre_channel, *p_dm_odm->p_is_scan_in_process == TRUE?"TRUE":"FALSE"));
|
}
|
|
void phydm_rf_init(struct PHY_DM_STRUCT *p_dm_odm)
|
{
|
|
odm_txpowertracking_init(p_dm_odm);
|
|
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN | ODM_CE))
|
odm_clear_txpowertracking_state(p_dm_odm);
|
#endif
|
|
#if (DM_ODM_SUPPORT_TYPE & (ODM_AP))
|
#if (RTL8814A_SUPPORT == 1)
|
if (p_dm_odm->support_ic_type & ODM_RTL8814A)
|
phy_iq_calibrate_8814a_init(p_dm_odm);
|
#endif
|
#endif
|
|
}
|
|
void phydm_rf_watchdog(struct PHY_DM_STRUCT *p_dm_odm)
|
{
|
|
#if (DM_ODM_SUPPORT_TYPE & (ODM_WIN | ODM_CE))
|
odm_txpowertracking_check(p_dm_odm);
|
if (p_dm_odm->support_ic_type & ODM_IC_11AC_SERIES)
|
odm_iq_calibrate(p_dm_odm);
|
#endif
|
}
|
