update yocto meta to add bridge-utils

guowenxue

2022-10-29 325f1949a4672d0936e406fc75c3b26446a40f18

 bsp/kernel/patch/linux-imx-lf-5.10.52-2.1.0.patch

@@ -1,18 +1,18 @@
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/igkboard.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/igkboard.dts
--- linux-imx/arch/arm/boot/dts/igkboard.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/igkboard.dts   2022-06-12 00:55:03.361803601 +0800
@@ -0,0 +1,688 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/igkboard.dts   2022-10-09 13:19:22.622732242 +0800
@@ -0,0 +1,608 @@
+/*
+ * Device Tree Source for LingYun IGKBoard(IoT Gateway Kit Board)
+ * Based on imx6ul-14x14-evk.dts/imx6ul-14x14-evk.dtsi
+ *
+ * Copyright (C) 2022 LingYun IoT System Studio.
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
+ * Author: Guo Wenxue<guowenxue@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+#include "imx6ull.dtsi"
+
+/ {
+   model = "LingYun IoT System Studio IoT Gateway Board";
@@ -144,21 +144,37 @@
+      status = "disabled"; /* Enable in LCD overlay */
+   };
+
+/*
+   /* 1-Wire sentinel for overlay */
+   w1: w1 {
+      compatible = "w1-gpio";
+      status = "disabled";
+   };
+
+   mqs: mqs {
+      #sound-dai-cells = <0>;
+      compatible = "fsl,imx6sx-mqs";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_mqs>;
+      clocks = <&clks IMX6UL_CLK_SAI1>;
+      clock-names = "mclk";
+      gpr = <&gpr>;
+      status = "okay";
+   };
+
+   sound-mqs {
+      compatible = "fsl,imx-audio-mqs";
+      model = "mqs-audio";
+      cpu-dai = <&sai1>;
+      asrc-controller = <&asrc>;
+      audio-cpu = <&sai1>;
+      audio-asrc = <&asrc>;
+      audio-codec = <&mqs>;
+      status = "okay";
+   };
+*/
+};
+
+/*+-------------------+
+  |   Misc Modules     |
+  +-------------------+*/
+
+/*+--------------+
+  | Misc Modules |
+  +--------------+*/
+
+&snvs_poweroff {
+   status = "okay";
@@ -188,9 +204,10 @@
+   status = "okay";
+};
+
+/*+-------------------+
+  |   Camera Module   |
+  +-------------------+*/
+
+/*+---------------+
+  | Camera Module |
+  +---------------+*/
+
+&i2c2 {
+   clock-frequency = <100000>;
@@ -237,7 +254,7 @@
+      mclk = <24000000>;
+      mclk_source = <0>;
+      /* rotation = <180>; */
+      status = "disabled"; /* Enable in camera overlay */
+      status = "disabled"; /* Enable in CAM overlay */
+      port {
+         ov5640_ep: endpoint {
+            remote-endpoint = <&csi1_ep>;
@@ -246,8 +263,8 @@
+   };
+};
+
+&csi { /* camera ov5640 */
+   status = "okay";
+&csi {
+   status = "disabled"; /* Enable in CAM overlay */
+   port {
+      csi1_ep: endpoint {
+         remote-endpoint = <&ov5640_ep>;
@@ -256,39 +273,39 @@
+};
+
+
+/*+-------------------+
+  |    Audio Module   |
+  +-------------------+*/
+/*+--------------+
+  | Audio Module |
+  +--------------+*/
+
+/* Refrence: https://www.toradex.com/zh-cn/blog/colibri-imx6ull-kuo-zhan-yin-pin-jie-ma-qi-max98357a
+ * +--------------------+--------------------+-----------------------+---------------------+
+ * | Audio Sample Rates |      Bit Clock     |  PLL4_AUDIO_DIV(512)  |    CLK_SAI1(/16)    |
+ * +--------------------+--------------------+-----------------------+---------------------+
+ * | 16bit,2Ch,48KHz    | 16x2x48000=1536000 | 1536000x512=786432000 | 1536000x16=24576000 |
+ * +--------------------+--------------------+-----------------------+---------------------+
+ * | 16bit,2Ch,44.1KHz  | 16x2x44100=1411200 | 1411200x512=722534400 | 1411200x16=22579200 |
+ * +--------------------+--------------------+-----------------------+---------------------+
+ */
+
+&clks {
+   assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+   assigned-clock-rates = <786432000>;
+   //assigned-clock-rates = <786432000>; // 16bit,2Ch,48KHz
+   assigned-clock-rates = <722534400>; // 16bit,2Ch,44.1KHz
+};
+
+/*
+&mqs {
+   pinctrl-names = "default";
+   pinctrl-0 = <&pinctrl_mqs>;
+   clocks = <&clks IMX6UL_CLK_SAI1>;
+   clock-names = "mclk";
+   status = "okay";
+};
+*/
+
+&sai1 {
+   assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>,
+           <&clks IMX6UL_CLK_SAI1>;
+   assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>, <&clks IMX6UL_CLK_SAI1>;
+   assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+   assigned-clock-rates = <0>, <24576000>;
+   //assigned-clock-rates = <0>, <24576000>; // 16bit,2Ch,48KHz
+   assigned-clock-rates = <0>, <22579200>; // 16bit,2Ch,44.1KHz
+   fsl,sai-mclk-direction-output;
+   status = "okay";
+};
+
+
+
+/*+-------------------+
+  | Ethernet Modules  |
+  +-------------------+*/
+/*+------------------+
+  | Ethernet Modules |
+  +------------------+*/
+
+&fec1 { /* eth0 */
+   pinctrl-names = "default";
@@ -334,10 +351,9 @@
+};
+
+
+
+/*+-------------------+
+  |  USB interface    |
+  +-------------------+*/
+/*+---------------+
+  | USB interface |
+  +---------------+*/
+
+&usbotg1 {
+   dr_mode = "otg";
@@ -361,9 +377,9 @@
+};
+
+
+/*+-------------------+
+  | USDCHC interface  |
+  +-------------------+*/
+/*+------------------+
+  | USDCHC interface |
+  +------------------+*/
+
+&usdhc1 { /* tf card slot */
+   pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -389,107 +405,9 @@
+};
+
+
+/*+------------------------------+
+  |   40 Pin Header GPIO iomuxc  |
+  +------------------------------+*/
+
+&iomuxc {
+   pinctrl-names = "default";
+   pinctrl-0 = <&pinctrl_extgpio>;
+   pinctrl-1 = <&pinctrl_i2c1 &pinctrl_ecspi1_master>;
+   pinctrl-2 = <&pinctrl_flexcan1 &pinctrl_flexcan2>;
+   pinctrl-3 = <&pinctrl_pwm>;
+   pinctrl-4 = <&pinctrl_uart2 &pinctrl_uart3 &pinctrl_uart4 &pinctrl_uart7>;
+   pinctrl-5 = <&pinctrl_lcdif_dat>;
+
+   pinctrl_extgpio: extgpiogrp {
+      fsl,pins = <
+         MX6UL_PAD_UART1_CTS_B__GPIO1_IO18   0x17059 /*   7#   GPIO   */
+         MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01   0x17059 /* 35#   GPIO   */
+         MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08   0x17059 /* 37#   GPIO   */
+         MX6UL_PAD_JTAG_TMS__GPIO1_IO11      0x17059 /* 36# GPIO */
+         MX6UL_PAD_JTAG_MOD__GPIO1_IO10      0x17059 /* 38# GPIO */
+         MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09   0x17059 /* 40# GPIO */
+      >;
+   };
+
+   pinctrl_i2c1: i2c1grp {
+      fsl,pins = <
+         MX6UL_PAD_GPIO1_IO03__GPIO1_IO03   0x17059 /*   3# I2C1_SDA */
+         MX6UL_PAD_GPIO1_IO02__I2C1_SCL      0x17059 /*   5# I2C1_SCL */
+      >;
+   };	
+
+   pinctrl_ecspi1_master: ecspi1grp1 {
+      fsl,pins = <
+         MX6UL_PAD_LCD_DATA22__GPIO3_IO27   0x17059 /* 19# SPI1_MOSI*/
+         MX6UL_PAD_LCD_DATA23__GPIO3_IO28   0x17059 /* 21# SPI1_MISO*/
+         MX6UL_PAD_LCD_DATA20__GPIO3_IO25   0x17059 /* 23# SPI1_SCLK*/
+         MX6UL_PAD_LCD_DATA21__GPIO3_IO26   0x17059 /* 24# SPI1_SS0 */
+      >;
+   };
+
+   pinctrl_flexcan1: flexcan1grp{
+      fsl,pins = <
+         MX6UL_PAD_UART3_CTS_B__GPIO1_IO26   0x17059 /* 27# CAN1_TX   */
+         MX6UL_PAD_UART3_RTS_B__GPIO1_IO27   0x17059 /* 29# CAN1_RX   */
+      >;
+   };
+
+   pinctrl_flexcan2: flexcan2grp{
+      fsl,pins = <
+         MX6UL_PAD_UART2_CTS_B__GPIO1_IO22   0x17059 /* 31# CAN2_TX   */
+         MX6UL_PAD_UART2_RTS_B__GPIO1_IO23   0x17059 /* 33# CAN2_RX   */
+      >;
+   };
+
+   pinctrl_pwm: pwmgrp {
+      fsl,pins = <
+         MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15   0x17059 /* 28# PWM8      */
+         MX6UL_PAD_JTAG_TCK__GPIO1_IO14      0x17059 /* 32# PWM7      */
+      >;
+   };
+
+   pinctrl_uart2: uart2grp {
+      fsl,pins = <
+         MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x17059 /* 8# UART2_TX */
+         MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x17059 /* 10# UART2_RX */
+      >;
+   };
+
+   pinctrl_uart3: uart3grp {
+      fsl,pins = <
+         MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x17059 /* 11# UART3_TX */
+         MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x17059 /* 12# UART3_RX */
+      >;
+   };
+
+   pinctrl_uart4: uart4grp {
+      fsl,pins = <
+         MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x17059 /* 13# UART4_TX */
+         MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x17059 /* 15# UART4_RX */
+      >;
+   };
+
+   pinctrl_uart7: uart7grp {
+      fsl,pins = <
+         MX6UL_PAD_LCD_DATA16__GPIO3_IO21   0x17059 /* 16# UART7_TX */
+         MX6UL_PAD_LCD_DATA17__GPIO3_IO22   0x17059 /* 18# UART7_RX */
+      >;
+   };
+
+   pinctrl_lcdif_dat: lcdifdatgrp {
+      fsl,pins = <
+         MX6UL_PAD_LCD_DATA18__GPIO3_IO23   0x17059 /* 22# GPIO      */
+         MX6UL_PAD_LCD_DATA19__GPIO3_IO24   0x17059 /* 26# GPIO      */
+      >;
+   };
+};
+
+
+/*+--------------------------+
+  |   Basic pinctrl iomuxc   |
+  +--------------------------+*/
+/*+----------------------+
+  | Basic pinctrl iomuxc |
+  +----------------------+*/
+&iomuxc {
+   pinctrl-names = "default";
+
@@ -521,6 +439,8 @@
+
+   pinctrl_csi1: csi1grp {
+      fsl,pins = <
+         MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05      0x17059 /* CSI_RST */
+         MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06      0x17059 /* CSI_PWDN */
+         MX6UL_PAD_CSI_MCLK__CSI_MCLK         0x1b088
+         MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK      0x1b088
+         MX6UL_PAD_CSI_VSYNC__CSI_VSYNC         0x1b088
@@ -692,7 +612,7 @@
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/Makefile linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/Makefile
--- linux-imx/arch/arm/boot/dts/Makefile   2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/Makefile   2022-06-11 23:31:44.840599746 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/Makefile   2022-10-09 13:19:22.622732242 +0800
@@ -1490,3 +1490,6 @@
    aspeed-bmc-opp-zaius.dtb \
    aspeed-bmc-portwell-neptune.dtb \
@@ -702,8 +622,8 @@
+subdir-$(CONFIG_SOC_IMX6UL) += overlays
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/cam.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/cam.dts
--- linux-imx/arch/arm/boot/dts/overlays/cam.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/cam.dts   2022-06-12 00:16:12.099379575 +0800
@@ -0,0 +1,16 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/cam.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
@@ -714,6 +634,14 @@
+
+/* MIPI-DSI2 camera overlay */
+
+&pxp { /* Pixel Pipeline (PXP) is a memory-to-memory graphics processing */
+   status = "okay";
+};
+
+&csi {
+   status = "okay";
+};
+
+&i2c2 {
+   ov5640@3c {
+      status = "okay";
@@ -722,8 +650,8 @@
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/can1.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/can1.dts
--- linux-imx/arch/arm/boot/dts/overlays/can1.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/can1.dts   2022-06-11 23:31:44.840599746 +0800
@@ -0,0 +1,29 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/can1.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
@@ -744,7 +672,6 @@
+};
+
+&iomuxc {
+   pinctrl-2 = <&pinctrl_flexcan1>;
+   pinctrl_flexcan1: flexcan1grp{
+      fsl,pins = <
+         MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX   0x1b020
@@ -755,8 +682,8 @@
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/can2.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/can2.dts
--- linux-imx/arch/arm/boot/dts/overlays/can2.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/can2.dts   2022-06-11 23:31:44.840599746 +0800
@@ -0,0 +1,29 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/can2.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
@@ -777,7 +704,6 @@
+};
+
+&iomuxc {
+   pinctrl-2 = <&pinctrl_flexcan2>;
+   pinctrl_flexcan2: flexcan2grp{
+      fsl,pins = <
+         MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX   0x1b020
@@ -788,8 +714,8 @@
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/i2c1.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/i2c1.dts
--- linux-imx/arch/arm/boot/dts/overlays/i2c1.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/i2c1.dts   2022-06-11 23:31:44.840599746 +0800
@@ -0,0 +1,29 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/i2c1.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
@@ -810,7 +736,6 @@
+};
+
+&iomuxc {
+   pinctrl-1 = <&pinctrl_i2c1>;
+   pinctrl_i2c1: i2c1grp {
+      fsl,pins = <
+         MX6UL_PAD_GPIO1_IO02__I2C1_SCL   0x4001b8b0
@@ -821,8 +746,8 @@
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/lcd.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/lcd.dts
--- linux-imx/arch/arm/boot/dts/overlays/lcd.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/lcd.dts   2022-06-12 00:05:07.087247158 +0800
@@ -0,0 +1,99 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/lcd.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
@@ -850,8 +775,7 @@
+   assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+   assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+   pinctrl-names = "default";
+   pinctrl-0 = <&pinctrl_lcdif_dat
+          &pinctrl_lcdif_ctrl>;
+   pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+   display = <&display0>;
+   status = "okay";
+
@@ -882,7 +806,6 @@
+};
+
+&iomuxc {
+   pinctrl-5 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+   pinctrl_lcdif_dat: lcdifdatgrp {
+      fsl,pins = <
+         MX6UL_PAD_LCD_DATA00__LCDIF_DATA00   0x79
@@ -901,14 +824,6 @@
+         MX6UL_PAD_LCD_DATA13__LCDIF_DATA13   0x79
+         MX6UL_PAD_LCD_DATA14__LCDIF_DATA14   0x79
+         MX6UL_PAD_LCD_DATA15__LCDIF_DATA15   0x79
+         MX6UL_PAD_LCD_DATA16__LCDIF_DATA16   0x79
+         MX6UL_PAD_LCD_DATA17__LCDIF_DATA17   0x79
+         MX6UL_PAD_LCD_DATA18__LCDIF_DATA18   0x79
+         MX6UL_PAD_LCD_DATA19__LCDIF_DATA19   0x79
+         MX6UL_PAD_LCD_DATA20__LCDIF_DATA20   0x79
+         MX6UL_PAD_LCD_DATA21__LCDIF_DATA21   0x79
+         MX6UL_PAD_LCD_DATA22__LCDIF_DATA22   0x79
+         MX6UL_PAD_LCD_DATA23__LCDIF_DATA23   0x79
+      >;
+   };
+
@@ -924,8 +839,8 @@
+};
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/Makefile linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/Makefile
--- linux-imx/arch/arm/boot/dts/overlays/Makefile   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/Makefile   2022-06-12 00:16:27.339271593 +0800
@@ -0,0 +1,16 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/Makefile   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# required for overlay support
@@ -939,13 +854,119 @@
+dtb-y += uart3.dtbo
+dtb-y += uart4.dtbo
+dtb-y += uart7.dtbo
+dtb-y += pwm7.dtbo
+dtb-y += pwm8.dtbo
+dtb-y += w1.dtbo
+dtb-y += lcd.dtbo
+dtb-y += cam.dtbo
+dtb-y += nbiot-4g.dtbo
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/nbiot-4g.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/nbiot-4g.dts
--- linux-imx/arch/arm/boot/dts/overlays/nbiot-4g.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/nbiot-4g.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "../imx6ul-pinfunc.h"
+
+/* NB-IoT/4G module use UART8 interfaces, conflict with SPI interface */
+
+&uart8 {
+   pinctrl-names = "default";
+   pinctrl-0 = <&pinctrl_spi_uart8 &pinctrl_nbiot_ctrl>;
+   status = "okay";
+};
+
+&iomuxc {
+   pinctrl_spi_uart8: spi_uart8_grp {
+      fsl,pins = <
+         MX6UL_PAD_LCD_DATA20__UART8_DCE_TX      0x1b0b1 /* MRXD */
+         MX6UL_PAD_LCD_DATA21__UART8_DCE_RX      0x1b0b1 /* MTXD */
+      >;
+   };
+
+   pinctrl_nbiot_ctrl: nbiot_ctrl_grp {
+      fsl,pins = <
+         MX6UL_PAD_LCD_DATA22__GPIO3_IO27      0x17059 /* NB_PWREN/4G_RESET */
+         MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15      0x17059 /* NB_MRST/4G_POWER_KEY */
+      >;
+   };
+};
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/pwm7.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/pwm7.dts
--- linux-imx/arch/arm/boot/dts/overlays/pwm7.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/pwm7.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include "../imx6ul-pinfunc.h"
+
+/* 40-pin extended GPIO, PWM7 interfaces */
+
+&pwm7 {
+   pinctrl-names = "default";
+   pinctrl-0 = <&pinctrl_pwm7>;
+   clocks = <&clks IMX6UL_CLK_PWM7>, <&clks IMX6UL_CLK_PWM7>;
+   status = "okay";
+};
+
+&iomuxc {
+   pinctrl_pwm7: pwm7grp {
+      fsl,pins = <
+         MX6UL_PAD_JTAG_TCK__PWM7_OUT   0x110b0
+      >;
+   };
+};
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/pwm8.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/pwm8.dts
--- linux-imx/arch/arm/boot/dts/overlays/pwm8.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/pwm8.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include "../imx6ul-pinfunc.h"
+
+/* 40-pin extended GPIO, PWM8 interfaces, conflict with NB-IoT */
+
+&pwm8 {
+   pinctrl-names = "default";
+   pinctrl-0 = <&pinctrl_pwm8_nbiot>;
+   clocks = <&clks IMX6UL_CLK_PWM8>, <&clks IMX6UL_CLK_PWM8>;
+   status = "okay";
+};
+
+&iomuxc {
+   pinctrl_pwm8_nbiot: pwm8nbiotgrp {
+      fsl,pins = <
+         MX6UL_PAD_JTAG_TRST_B__PWM8_OUT   0x110b0
+      >;
+   };
+};
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/spi1.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/spi1.dts
--- linux-imx/arch/arm/boot/dts/overlays/spi1.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/spi1.dts   2022-06-11 23:31:44.840599746 +0800
@@ -0,0 +1,40 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/spi1.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
@@ -957,11 +978,11 @@
+#include <dt-bindings/gpio/gpio.h>
+#include "../imx6ul-pinfunc.h"
+
+/* 40-pin extended GPIO, SPI1 interfaces, conflict with LCD display */
+/* 40-pin extended GPIO, SPI1 interfaces, conflict with UART8 */
+
+&ecspi1 {
+   pinctrl-names = "default";
+   pinctrl-0 = <&pinctrl_ecspi1_master>;
+   pinctrl-0 = <&pinctrl_spi_uart8>;
+   cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+   status = "okay";
+
@@ -976,8 +997,7 @@
+};
+
+&iomuxc {
+   pinctrl-1 = <&pinctrl_ecspi1_master>;
+   pinctrl_ecspi1_master: ecspi1grp1 {
+   pinctrl_spi_uart8: spi_uart8_grp {
+      fsl,pins = <
+         MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK   0x10b0
+         MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI   0x10b0
@@ -988,8 +1008,8 @@
+};
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/uart2.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart2.dts
--- linux-imx/arch/arm/boot/dts/overlays/uart2.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart2.dts   2022-06-11 23:31:44.840599746 +0800
@@ -0,0 +1,27 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart2.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
@@ -1009,7 +1029,6 @@
+};
+
+&iomuxc {
+   pinctrl-4 = <&pinctrl_uart2>;
+   pinctrl_uart2: uart2grp {
+      fsl,pins = <
+         MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x1b0b1
@@ -1019,8 +1038,8 @@
+};
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/uart3.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart3.dts
--- linux-imx/arch/arm/boot/dts/overlays/uart3.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart3.dts   2022-06-11 23:31:44.840599746 +0800
@@ -0,0 +1,28 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart3.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
@@ -1040,7 +1059,6 @@
+};
+
+&iomuxc {
+   pinctrl-4 = <&pinctrl_uart3>;
+   pinctrl_uart3: uart3grp {
+      fsl,pins = <
+         MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX   0x1b0b1
@@ -1051,8 +1069,8 @@
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/uart4.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart4.dts
--- linux-imx/arch/arm/boot/dts/overlays/uart4.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart4.dts   2022-06-11 23:31:44.840599746 +0800
@@ -0,0 +1,28 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart4.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
@@ -1072,7 +1090,6 @@
+};
+
+&iomuxc {
+   pinctrl-4 = <&pinctrl_uart4>;
+   pinctrl_uart4: uart4grp {
+      fsl,pins = <
+         MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX   0x1b0b1
@@ -1083,8 +1100,8 @@
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/uart7.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart7.dts
--- linux-imx/arch/arm/boot/dts/overlays/uart7.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart7.dts   2022-06-11 23:31:44.840599746 +0800
@@ -0,0 +1,28 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/uart7.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
@@ -1104,7 +1121,6 @@
+};
+
+&iomuxc {
+   pinctrl-4 = <&pinctrl_uart7>;
+   pinctrl_uart7: uart7grp {
+      fsl,pins = <
+         MX6UL_PAD_LCD_DATA16__UART7_DCE_TX      0x1b0b1
@@ -1113,10 +1129,45 @@
+   };
+};
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/overlays/w1.dts linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/w1.dts
--- linux-imx/arch/arm/boot/dts/overlays/w1.dts   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/boot/dts/overlays/w1.dts   2022-10-09 13:19:22.626732206 +0800
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2022 LingYun IoT System Studio
+ * Author:  Guo Wenxue<guowenxue@gmail.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "../imx6ul-pinfunc.h"
+
+/* W1(DS18B20) on 40Pin Header Pin#7 (GPIO1_IO18) */
+
+&w1 {
+    compatible = "w1-gpio";
+    status = "okay";
+
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_w1>;
+    gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+};
+
+
+&iomuxc {
+   pinctrl_w1: w1grp {
+      fsl,pins = <
+         MX6UL_PAD_UART1_CTS_B__GPIO1_IO18   0x110b0
+      >;
+   };
+};
+
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/arch/arm/configs/igkboard_defconfig linux-imx-lf-5.10.52-2.1.0/arch/arm/configs/igkboard_defconfig
--- linux-imx/arch/arm/configs/igkboard_defconfig   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/configs/igkboard_defconfig   2022-06-12 12:58:49.937918843 +0800
@@ -0,0 +1,722 @@
+++ linux-imx-lf-5.10.52-2.1.0/arch/arm/configs/igkboard_defconfig   2022-10-09 13:20:51.349955648 +0800
@@ -0,0 +1,726 @@
+CONFIG_KERNEL_LZO=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
@@ -1365,6 +1416,9 @@
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_STMPE=y
+CONFIG_GPIO_74X164=y
+CONFIG_W1=y
+CONFIG_W1_MASTER_GPIO=y
+CONFIG_W1_SLAVE_THERM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
@@ -1621,10 +1675,11 @@
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_FSL_ASRC=y
+CONFIG_SND_SOC_FSL_SAI=y
+CONFIG_SND_SOC_FSL_MQS=y
+CONFIG_SND_SOC_FSL_RPMSG=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_FSL_ASOC_CARD=y
+CONFIG_SND_SOC_AC97_CODEC=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_HID_MULTITOUCH=y
+CONFIG_USB=y
@@ -1839,31 +1894,73 @@
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/drivers/bluetooth/btrtl.c linux-imx-lf-5.10.52-2.1.0/drivers/bluetooth/btrtl.c
--- linux-imx/drivers/bluetooth/btrtl.c   2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/drivers/bluetooth/btrtl.c   2022-10-09 13:19:22.626732206 +0800
@@ -136,12 +136,12 @@
      .fw_name  = "rtl_bt/rtl8761a_fw.bin",
      .cfg_name = "rtl_bt/rtl8761a_config" },

-   /* 8761B */
+   /* 8761BU */
    { IC_INFO(RTL_ROM_LMP_8761A, 0xb),
      .config_needed = false,
      .has_rom_version = true,
-     .fw_name  = "rtl_bt/rtl8761b_fw.bin",
-     .cfg_name = "rtl_bt/rtl8761b_config" },
+     .fw_name  = "rtl_bt/rtl8761bu_fw.bin",
+     .cfg_name = "rtl_bt/rtl8761bu_config" },

    /* 8822C with UART interface */
    { .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV |
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/drivers/bluetooth/btusb.c linux-imx-lf-5.10.52-2.1.0/drivers/bluetooth/btusb.c
--- linux-imx/drivers/bluetooth/btusb.c   2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/drivers/bluetooth/btusb.c   2022-10-09 13:19:22.626732206 +0800
@@ -419,6 +419,9 @@
    { USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
    { USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },

+   /*  Additional Realtek 8761B Bluetooth devices */
+   { USB_DEVICE(0x2357, 0x0604), .driver_info = BTUSB_REALTEK },
+
    /* Additional Realtek 8821AE Bluetooth devices */
    { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
    { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/drivers/video/backlight/pwm_bl.c linux-imx-lf-5.10.52-2.1.0/drivers/video/backlight/pwm_bl.c
--- linux-imx/drivers/video/backlight/pwm_bl.c   2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/drivers/video/backlight/pwm_bl.c   2022-06-12 12:58:36.010063853 +0800
+++ linux-imx-lf-5.10.52-2.1.0/drivers/video/backlight/pwm_bl.c   2022-10-09 13:19:22.626732206 +0800
@@ -558,6 +558,7 @@
    if (!state.period && (data->pwm_period_ns > 0))
       state.period = data->pwm_period_ns;
 

+   state.enabled = true; /* Add by guowenxue to enalbe backlight as default */
    ret = pwm_apply_state(pb->pwm, &state);
    if (ret) {
       dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/Makefile linux-imx-lf-5.10.52-2.1.0/Makefile
--- linux-imx/Makefile   2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/Makefile   2022-06-12 12:58:43.693983895 +0800
+++ linux-imx-lf-5.10.52-2.1.0/Makefile   2022-10-09 13:20:41.118045212 +0800
@@ -367,7 +367,8 @@
 # Alternatively CROSS_COMPILE can be set in the environment.
 # Default value for CROSS_COMPILE is not to prefix executables
 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-ARCH      ?= $(SUBARCH)
+ARCH      ?= arm
+CROSS_COMPILE?=/opt/buildroot/cortexA7/bin/arm-linux-
 
+CROSS_COMPILE ?= arm-linux-gnueabihf-

 # Architecture as present in compile.h
 UTS_MACHINE    := $(ARCH)
@@ -1833,6 +1834,7 @@
@@ -1353,6 +1354,9 @@
 %.dtb: include/config/kernel.release scripts_dtc
    $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@

+%.dtbo: include/config/kernel.release scripts_dtc
+   $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
+
 PHONY += dtbs dtbs_install dtbs_check
 dtbs: include/config/kernel.release scripts_dtc
    $(Q)$(MAKE) $(build)=$(dtstree)
@@ -1833,6 +1837,7 @@
       \( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \
       -o -name '*.ko.*' \
       -o -name '*.dtb' -o -name '*.dtb.S' -o -name '*.dt.yaml' \
@@ -1873,11 +1970,11 @@
       -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/scripts/Makefile.lib linux-imx-lf-5.10.52-2.1.0/scripts/Makefile.lib
--- linux-imx/scripts/Makefile.lib   2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/scripts/Makefile.lib   2022-06-11 23:31:44.840599746 +0800
+++ linux-imx-lf-5.10.52-2.1.0/scripts/Makefile.lib   2022-10-09 13:19:22.630732171 +0800
@@ -325,6 +325,16 @@
 $(obj)/%.dtb: $(src)/%.dts $(DTC) FORCE
    $(call if_changed_dep,dtc)
 

+quiet_cmd_dtco = DTCO     $@
+cmd_dtco = $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+   $(DTC) -O dtb -o $@ -b 0 \
@@ -1891,3 +1988,15 @@
 DT_CHECKER ?= dt-validate
 DT_BINDING_DIR := Documentation/devicetree/bindings
 # DT_TMP_SCHEMA may be overridden from Documentation/devicetree/bindings/Makefile
diff -Nuar --no-dereference -x logo_linux_clut224.ppm linux-imx/sound/soc/fsl/fsl_sai.c linux-imx-lf-5.10.52-2.1.0/sound/soc/fsl/fsl_sai.c
--- linux-imx/sound/soc/fsl/fsl_sai.c   2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-lf-5.10.52-2.1.0/sound/soc/fsl/fsl_sai.c   2022-10-09 13:19:22.630732171 +0800
@@ -1349,7 +1349,7 @@
       sai->bus_clk = NULL;
    }

-   for (i = 0; i < FSL_SAI_MCLK_MAX; i++) {
+   for (i = 1; i < FSL_SAI_MCLK_MAX; i++) {
       sprintf(tmp, "mclk%d", i);
       sai->mclk_clk[i] = devm_clk_get(&pdev->dev, tmp);
       if (IS_ERR(sai->mclk_clk[i])) {