rename meta-igkboard and update build.sh

guowenxue

2023-03-30 73a47a99a3f9e0e5552a082bdbf7c00cadb82797

 yocto/build.sh

@@ -2,17 +2,23 @@
# This shell script used to build yocto for igkbaord

BOARD=igkboard
VERSION=honister

# https://wiki.yoctoproject.org/wiki/Releases
# Version should be: hardknott(3.3) honister(3.4) kirkstone(4.0)
VERSION=kirkstone

# i.MX BSP release version:
# https://www.nxp.com/design/software/embedded-software/i-mx-software/embedded-linux-for-i-mx-applications-processors:IMXLINUX
BSPVER=lf-5.15.71-2.2.0

PACKDIR=`pwd`/yocto_packets
#PACKDIR=${HOME}/yocto/yocto_packets
BUILDIR=$BOARD

PRJ_PATH=`pwd`
WORKDIR=${PRJ_PATH}/workspace-${VERSION}
WORKDIR=${PRJ_PATH}/${VERSION}-${BSPVER}

SRV_URL=http://weike-iot.com:2211/yocto/
#SRV_URL=http://127.0.0.1:2211/yocto/
SRV_URL=http://master.iot-yun.club:2211/imx/bsp/yocto/
#SRV_URL=http://127.0.0.1:2211/imx/bsp/yocto/
YOCTO_TAR=imx-yocto-bsp-${VERSION}.tar.xz

set -e
@@ -90,7 +96,7 @@
    cd ${PRJ_PATH}
    do_unpack tarballs/$YOCTO_TAR

    mv imx-yocto-bsp workspace-${VERSION}
    mv imx-yocto-bsp $WORKDIR
}

function do_patch()
@@ -103,7 +109,7 @@
    pr_info "start patch Yocto ${VERSION}"

    cd ${WORKDIR}/sources
    cp -af ${WORKDIR}/../meta-${BOARD}/${VERSION} meta-${BOARD}
    cp -af ${WORKDIR}/../meta-${BOARD}/${VERSION}-${BSPVER} meta-${BOARD}

    cd ${WORKDIR}
}
@@ -127,7 +133,7 @@
    sed -i "s|^DL_DIR.*|DL_DIR ?= \"${PACKDIR}\"|g" conf/local.conf

    #bitbake -c clean u-boot-imx linux-imx ${TARGET}
    bitbake -k ${TARGET}
    bitbake ${TARGET}

    cd ${WORKDIR}
}
@@ -140,7 +146,7 @@
    cd $WORKDIR

    set -x
    ls $WORKDIR/imx-yocto-bsp/${BUILDIR}/tmp/deploy/images/${BOARD}/
    ls $WORKDIR/${BUILDIR}/tmp/deploy/images/${BOARD}/
    set +x
}