update linux patch for ov5640 dts, ov5640 can work normal on 64x480

guowenxue

2021-11-23 89e9f58c817a3c2b2ed4f4c363cd90bf5d1fea0a

 bsp/kernel/patch/linux-imx-imx6ull.patch

@@ -1,6 +1,6 @@
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
--- linux-imx/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi   2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi   2021-11-20 00:00:25.765567396 +0800
+++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi   2021-11-23 19:58:00.218178392 +0800
@@ -31,7 +31,41 @@
       brightness-levels = <0 4 8 16 32 64 128 255>;
       default-brightness-level = <6>;
@@ -65,7 +65,32 @@
       /*
        * If you want to want to make this dynamic please
        * check schematics and test all affected peripherals:
@@ -142,7 +173,7 @@
@@ -78,6 +109,24 @@
       gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
    };
 
+   reg_3p3v: 3p3v {
+      compatible = "regulator-fixed";
+      regulator-name = "3P3V";
+      regulator-min-microvolt = <3300000>;
+      regulator-max-microvolt = <3300000>;
+      regulator-boot-on;
+      regulator-always-on;
+   };
+
+   reg_1p8v: 1p8v {
+      compatible = "regulator-fixed";
+      regulator-name = "1P8V";
+      regulator-min-microvolt = <1800000>;
+      regulator-max-microvolt = <1800000>;
+      regulator-boot-on;
+      regulator-always-on;
+   };
+
    sound {
       compatible = "simple-audio-card";
       simple-audio-card,name = "mx6ul-wm8960";
@@ -142,7 +191,7 @@
       compatible = "spi-gpio";
       pinctrl-names = "default";
       pinctrl-0 = <&pinctrl_spi4>;
@@ -74,7 +99,16 @@
       pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
       gpio-sck = <&gpio5 11 0>;
       gpio-mosi = <&gpio5 10 0>;
@@ -184,6 +215,26 @@
@@ -169,7 +218,7 @@
 };
 
 &csi {
-   status = "disabled";
+   status = "okay";
 
    port {
       csi1_ep: endpoint {
@@ -184,6 +233,26 @@
    pinctrl-0 = <&pinctrl_i2c2>;
    status = "okay";
 
@@ -101,7 +135,7 @@
    codec: wm8960@1a {
       #sound-dai-cells = <0>;
       compatible = "wlf,wm8960";
@@ -192,7 +243,8 @@
@@ -192,7 +261,8 @@
       wlf,hp-cfg = <3 2 3>;
       wlf,gpio-cfg = <1 3>;
       clocks = <&clks IMX6UL_CLK_SAI2>;
@@ -111,22 +145,43 @@
    };
 
    ov5640: ov5640@3c {
@@ -221,7 +273,9 @@
    pinctrl-0 = <&pinctrl_enet1>;
@@ -202,12 +272,19 @@
       pinctrl-0 = <&pinctrl_csi1>;
       clocks = <&clks IMX6UL_CLK_CSI>;
       clock-names = "csi_mclk";
-      pwn-gpios = <&gpio_spi 6 1>;
-      rst-gpios = <&gpio_spi 5 0>;
+
+      DOVDD-supply = <&reg_3p3v>;
+      VDD-supply = <&reg_1p8v>;
+      AVDD-supply = <&reg_3p3v>;
+      DVDD-supply = <&reg_3p3v>;
+
+        pwn-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+        rst-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
       csi_id = <0>;
       mclk = <24000000>;
       mclk_source = <0>;
-      status = "disabled";
+        /* rotation = <180>; */
+      status = "okay";
       port {
          ov5640_ep: endpoint {
             remote-endpoint = <&csi1_ep>;
@@ -222,6 +299,9 @@
    phy-mode = "rmii";
    phy-handle = <&ethphy0>;
-   phy-supply = <&reg_peri_3v3>;
    phy-supply = <&reg_peri_3v3>;
+    phy-reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; /* MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 conflict with spi4 */
+    phy-reset-duration = <50>;
+    phy-reset-post-delay = <15>;
    status = "okay";
 };
 
@@ -230,15 +284,17 @@
    pinctrl-0 = <&pinctrl_enet2>;
@@ -231,14 +311,17 @@
    phy-mode = "rmii";
    phy-handle = <&ethphy1>;
-   phy-supply = <&reg_peri_3v3>;
    phy-supply = <&reg_peri_3v3>;
+    phy-reset-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; /* MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 conflict with sai2 */
+    phy-reset-duration = <50>;
+    phy-reset-post-delay = <15>;
@@ -143,7 +198,7 @@
          micrel,led-mode = <1>;
          clocks = <&clks IMX6UL_CLK_ENET_REF>;
          clock-names = "rmii-ref";
@@ -301,21 +357,21 @@
@@ -301,21 +384,21 @@
 
    display0: display@0 {
       bits-per-pixel = <16>;
@@ -175,7 +230,7 @@
             hsync-active = <0>;
             vsync-active = <0>;
             de-active = <1>;
@@ -332,6 +388,13 @@
@@ -332,6 +415,13 @@
    status = "okay";
 };
 
@@ -189,7 +244,7 @@
 &pxp {
    status = "okay";
 };
@@ -339,7 +402,7 @@
@@ -339,7 +429,7 @@
 &qspi {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_qspi>;
@@ -198,7 +253,7 @@
 
    flash0: n25q256a@0 {
       #address-cells = <1>;
@@ -360,7 +423,7 @@
@@ -360,7 +450,7 @@
    assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
    assigned-clock-rates = <0>, <12288000>;
    fsl,sai-mclk-direction-output;
@@ -207,7 +262,7 @@
 };
 
 &snvs_poweroff {
@@ -439,6 +502,7 @@
@@ -439,6 +529,7 @@
    pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
    pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
    cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
@@ -215,7 +270,7 @@
    keep-power-in-suspend;
    wakeup-source;
    vmmc-supply = <&reg_sd1_vmmc>;
@@ -446,8 +510,8 @@
@@ -446,8 +537,8 @@
 };
 
 &usdhc2 {
@@ -226,7 +281,7 @@
    non-removable;
    keep-power-in-suspend;
    wakeup-source;
@@ -463,6 +527,25 @@
@@ -463,6 +554,25 @@
 &iomuxc {
    pinctrl-names = "default";
 
@@ -252,15 +307,15 @@
    pinctrl_csi1: csi1grp {
       fsl,pins = <
          MX6UL_PAD_CSI_MCLK__CSI_MCLK      0x1b088
@@ -490,6 +573,7 @@
@@ -490,6 +600,7 @@
          MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00   0x1b0b0
          MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01   0x1b0b0
          MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1   0x4001b031
+         MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07   0x10B0 /* ENET1 RESET conflict with pinctrl_spi4 */
+         MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07       0x10B0 /* ENET1 RESET conflict with pinctrl_spi4 */
       >;
    };
 
@@ -505,6 +589,7 @@
@@ -505,6 +616,7 @@
          MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00   0x1b0b0
          MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01   0x1b0b0
          MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2   0x4001b031
@@ -268,7 +323,7 @@
       >;
    };
 
@@ -594,19 +679,18 @@
@@ -594,19 +706,18 @@
          MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA   0x11088
          MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA   0x11088
          MX6UL_PAD_JTAG_TMS__SAI2_MCLK      0x17088
@@ -292,7 +347,7 @@
       >;
    };
 
@@ -625,7 +709,6 @@
@@ -625,7 +736,6 @@
       fsl,pins = <
          MX6UL_PAD_BOOT_MODE0__GPIO5_IO10   0x70a1
          MX6UL_PAD_BOOT_MODE1__GPIO5_IO11   0x70a1
@@ -300,7 +355,7 @@
          MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08   0x80000000
       >;
    };
@@ -678,9 +761,7 @@
@@ -678,9 +788,7 @@
          MX6UL_PAD_SD1_DATA1__USDHC1_DATA1    0x17059
          MX6UL_PAD_SD1_DATA2__USDHC1_DATA2    0x17059
          MX6UL_PAD_SD1_DATA3__USDHC1_DATA3    0x17059
@@ -313,7 +368,7 @@
 
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/imx6ul.dtsi linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi
--- linux-imx/arch/arm/boot/dts/imx6ul.dtsi   2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi   2021-11-18 23:10:08.149821196 +0800
+++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi   2021-11-23 19:45:27.875382794 +0800
@@ -727,6 +727,7 @@
                offset = <0x34>;
                interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
@@ -324,8 +379,8 @@
             snvs_poweroff: snvs-poweroff {
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/.cfg-imx6ull linux-imx-imx6ull/.cfg-imx6ull
--- linux-imx/.cfg-imx6ull   1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-imx6ull/.cfg-imx6ull   2021-11-19 23:56:45.007385743 +0800
@@ -0,0 +1,6833 @@
+++ linux-imx-imx6ull/.cfg-imx6ull   2021-11-23 20:06:37.849363291 +0800
@@ -0,0 +1,6819 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Linux/arm 5.10.52 Kernel Configuration
@@ -3508,9 +3563,9 @@
+#
+# Webcam devices
+#
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_GSPCA=y
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
@@ -3605,22 +3660,7 @@
+# CONFIG_USB_HACKRF is not set
+# CONFIG_USB_MSI2500 is not set
+# CONFIG_MEDIA_PCI_SUPPORT is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_RADIO_SI4713 is not set
+CONFIG_RADIO_SI476X=y
+# CONFIG_USB_MR800 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_SHARK is not set
+# CONFIG_RADIO_SHARK2 is not set
+# CONFIG_USB_KEENE is not set
+# CONFIG_USB_RAREMONO is not set
+# CONFIG_USB_MA901 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_SAA7706H is not set
+# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_RADIO_WL1273 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_VIDEOBUF2_CORE=y
+CONFIG_VIDEOBUF2_V4L2=y
+CONFIG_VIDEOBUF2_MEMOPS=y
@@ -3631,28 +3671,29 @@
+# CONFIG_VIDEO_CADENCE is not set
+# CONFIG_VIDEO_ASPEED is not set
+CONFIG_VIDEO_MUX=y
+CONFIG_VIDEO_MXC_CAPTURE=m
+CONFIG_VIDEO_MXC_CAPTURE=y
+# CONFIG_VIDEO_MX8_CAPTURE is not set
+CONFIG_VIDEO_MXC_OUTPUT=y
+CONFIG_VIDEO_V4L2_MXC_INT_DEVICE=m
+CONFIG_VIDEO_MXC_CSI_CAMERA=m
+CONFIG_MXC_VADC=m
+CONFIG_MXC_MIPI_CSI=m
+CONFIG_VIDEO_V4L2_MXC_INT_DEVICE=y
+CONFIG_VIDEO_MXC_CSI_CAMERA=y
+CONFIG_MXC_VADC=y
+CONFIG_MXC_MIPI_CSI=y
+
+#
+# MXC Camera/V4L2 PRP Features support
+#
+CONFIG_VIDEO_MXC_IPU_CAMERA=y
+CONFIG_MXC_CAMERA_OV5640=m
+CONFIG_MXC_CAMERA_OV5640_V2=m
+# CONFIG_MXC_CAMERA_OV5640 is not set
+CONFIG_MXC_CAMERA_OV5640_V2=y
+# CONFIG_MXC_CAMERA_OV5642 is not set
+CONFIG_MXC_CAMERA_OV5640_MIPI=m
+CONFIG_MXC_CAMERA_OV5640_MIPI_V2=m
+# CONFIG_MXC_CAMERA_OV5640_MIPI is not set
+CONFIG_MXC_CAMERA_OV5640_MIPI_V2=y
+# CONFIG_MXC_CAMERA_OV5647_MIPI is not set
+CONFIG_MXC_TVIN_ADV7180=m
+CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m
+CONFIG_MXC_IPU_PRP_ENC=m
+CONFIG_MXC_IPU_CSI_ENC=m
+# CONFIG_MXC_TVIN_ADV7180 is not set
+CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=y
+# CONFIG_MXC_IPU_PRP_VF_SDC is not set
+CONFIG_MXC_IPU_PRP_ENC=y
+CONFIG_MXC_IPU_CSI_ENC=y
+# end of MXC Camera/V4L2 PRP Features support
+
+CONFIG_VIDEO_MXC_IPU_OUTPUT=y
@@ -7161,7 +7202,7 @@
+# end of Kernel hacking
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/Makefile linux-imx-imx6ull/Makefile
--- linux-imx/Makefile   2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-imx6ull/Makefile   2021-11-19 23:54:49.744292020 +0800
+++ linux-imx-imx6ull/Makefile   2021-11-23 19:58:23.629972395 +0800
@@ -367,7 +367,8 @@
 # Alternatively CROSS_COMPILE can be set in the environment.
 # Default value for CROSS_COMPILE is not to prefix executables