| | |
| | | diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi |
| | | --- linux-imx/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi 2021-09-08 18:41:11.000000000 +0800 |
| | | +++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi 2021-11-17 23:49:58.757150998 +0800 |
| | | +++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi 2021-11-23 19:58:00.218178392 +0800 |
| | | @@ -31,7 +31,41 @@ |
| | | brightness-levels = <0 4 8 16 32 64 128 255>; |
| | | default-brightness-level = <6>; |
| | |
| | | |
| | | pxp_v4l2 { |
| | | compatible = "fsl,imx6ul-pxp-v4l2", "fsl,imx6sx-pxp-v4l2", "fsl,imx6sl-pxp-v4l2"; |
| | | @@ -142,7 +176,7 @@ |
| | | @@ -43,19 +77,16 @@ |
| | | regulator-name = "VSD_3V3"; |
| | | regulator-min-microvolt = <3300000>; |
| | | regulator-max-microvolt = <3300000>; |
| | | - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| | | off-on-delay-us = <20000>; |
| | | enable-active-high; |
| | | }; |
| | | |
| | | reg_peri_3v3: regulator-peri-3v3 { |
| | | compatible = "regulator-fixed"; |
| | | - pinctrl-names = "default"; |
| | | - pinctrl-0 = <&pinctrl_peri_3v3>; |
| | | regulator-name = "VPERI_3V3"; |
| | | regulator-min-microvolt = <3300000>; |
| | | regulator-max-microvolt = <3300000>; |
| | | - gpio = <&gpio5 2 GPIO_ACTIVE_LOW>; |
| | | + |
| | | /* |
| | | * If you want to want to make this dynamic please |
| | | * check schematics and test all affected peripherals: |
| | | @@ -78,6 +109,24 @@ |
| | | gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>; |
| | | }; |
| | | |
| | | + reg_3p3v: 3p3v { |
| | | + compatible = "regulator-fixed"; |
| | | + regulator-name = "3P3V"; |
| | | + regulator-min-microvolt = <3300000>; |
| | | + regulator-max-microvolt = <3300000>; |
| | | + regulator-boot-on; |
| | | + regulator-always-on; |
| | | + }; |
| | | + |
| | | + reg_1p8v: 1p8v { |
| | | + compatible = "regulator-fixed"; |
| | | + regulator-name = "1P8V"; |
| | | + regulator-min-microvolt = <1800000>; |
| | | + regulator-max-microvolt = <1800000>; |
| | | + regulator-boot-on; |
| | | + regulator-always-on; |
| | | + }; |
| | | + |
| | | sound { |
| | | compatible = "simple-audio-card"; |
| | | simple-audio-card,name = "mx6ul-wm8960"; |
| | | @@ -142,7 +191,7 @@ |
| | | compatible = "spi-gpio"; |
| | | pinctrl-names = "default"; |
| | | pinctrl-0 = <&pinctrl_spi4>; |
| | |
| | | pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; |
| | | gpio-sck = <&gpio5 11 0>; |
| | | gpio-mosi = <&gpio5 10 0>; |
| | | @@ -184,6 +218,12 @@ |
| | | @@ -169,7 +218,7 @@ |
| | | }; |
| | | |
| | | &csi { |
| | | - status = "disabled"; |
| | | + status = "okay"; |
| | | |
| | | port { |
| | | csi1_ep: endpoint { |
| | | @@ -184,6 +233,26 @@ |
| | | pinctrl-0 = <&pinctrl_i2c2>; |
| | | status = "okay"; |
| | | |
| | | + gt9xx@5d { |
| | | + compatible = "goodix,gt9147"; |
| | | + reg = <0x5d>; |
| | | + pinctrl-names = "default"; |
| | | + pinctrl-0 = <&pinctrl_ts_pins>; |
| | | + |
| | | + irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
| | | + reset-gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; |
| | | + interrupt-parent = <&gpio5>; |
| | | + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; |
| | | + |
| | | + status = "okay"; |
| | | + }; |
| | | + |
| | | + rtc@6f { |
| | | + compatible = "isil,isl1208"; |
| | | + reg = <0x6f>; |
| | |
| | | codec: wm8960@1a { |
| | | #sound-dai-cells = <0>; |
| | | compatible = "wlf,wm8960"; |
| | | @@ -192,7 +232,8 @@ |
| | | @@ -192,7 +261,8 @@ |
| | | wlf,hp-cfg = <3 2 3>; |
| | | wlf,gpio-cfg = <1 3>; |
| | | clocks = <&clks IMX6UL_CLK_SAI2>; |
| | |
| | | }; |
| | | |
| | | ov5640: ov5640@3c { |
| | | @@ -221,7 +262,9 @@ |
| | | pinctrl-0 = <&pinctrl_enet1>; |
| | | @@ -202,12 +272,19 @@ |
| | | pinctrl-0 = <&pinctrl_csi1>; |
| | | clocks = <&clks IMX6UL_CLK_CSI>; |
| | | clock-names = "csi_mclk"; |
| | | - pwn-gpios = <&gpio_spi 6 1>; |
| | | - rst-gpios = <&gpio_spi 5 0>; |
| | | + |
| | | + DOVDD-supply = <®_3p3v>; |
| | | + VDD-supply = <®_1p8v>; |
| | | + AVDD-supply = <®_3p3v>; |
| | | + DVDD-supply = <®_3p3v>; |
| | | + |
| | | + pwn-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; |
| | | + rst-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; |
| | | csi_id = <0>; |
| | | mclk = <24000000>; |
| | | mclk_source = <0>; |
| | | - status = "disabled"; |
| | | + /* rotation = <180>; */ |
| | | + status = "okay"; |
| | | port { |
| | | ov5640_ep: endpoint { |
| | | remote-endpoint = <&csi1_ep>; |
| | | @@ -222,6 +299,9 @@ |
| | | phy-mode = "rmii"; |
| | | phy-handle = <ðphy0>; |
| | | - phy-supply = <®_peri_3v3>; |
| | | phy-supply = <®_peri_3v3>; |
| | | + phy-reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; /* MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 conflict with spi4 */ |
| | | + phy-reset-duration = <50>; |
| | | + phy-reset-post-delay = <15>; |
| | | status = "okay"; |
| | | }; |
| | | |
| | | @@ -230,15 +273,17 @@ |
| | | pinctrl-0 = <&pinctrl_enet2>; |
| | | @@ -231,14 +311,17 @@ |
| | | phy-mode = "rmii"; |
| | | phy-handle = <ðphy1>; |
| | | - phy-supply = <®_peri_3v3>; |
| | | phy-supply = <®_peri_3v3>; |
| | | + phy-reset-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; /* MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 conflict with sai2 */ |
| | | + phy-reset-duration = <50>; |
| | | + phy-reset-post-delay = <15>; |
| | |
| | | micrel,led-mode = <1>; |
| | | clocks = <&clks IMX6UL_CLK_ENET_REF>; |
| | | clock-names = "rmii-ref"; |
| | | @@ -301,21 +346,21 @@ |
| | | @@ -301,21 +384,21 @@ |
| | | |
| | | display0: display@0 { |
| | | bits-per-pixel = <16>; |
| | |
| | | hsync-active = <0>; |
| | | vsync-active = <0>; |
| | | de-active = <1>; |
| | | @@ -332,6 +377,13 @@ |
| | | @@ -332,6 +415,13 @@ |
| | | status = "okay"; |
| | | }; |
| | | |
| | |
| | | &pxp { |
| | | status = "okay"; |
| | | }; |
| | | @@ -339,7 +391,7 @@ |
| | | @@ -339,7 +429,7 @@ |
| | | &qspi { |
| | | pinctrl-names = "default"; |
| | | pinctrl-0 = <&pinctrl_qspi>; |
| | |
| | | |
| | | flash0: n25q256a@0 { |
| | | #address-cells = <1>; |
| | | @@ -360,7 +412,7 @@ |
| | | @@ -360,7 +450,7 @@ |
| | | assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; |
| | | assigned-clock-rates = <0>, <12288000>; |
| | | fsl,sai-mclk-direction-output; |
| | |
| | | }; |
| | | |
| | | &snvs_poweroff { |
| | | @@ -451,7 +503,7 @@ |
| | | @@ -439,6 +529,7 @@ |
| | | pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| | | pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| | | cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; |
| | | + no-1-8-v; |
| | | keep-power-in-suspend; |
| | | wakeup-source; |
| | | vmmc-supply = <®_sd1_vmmc>; |
| | | @@ -446,8 +537,8 @@ |
| | | }; |
| | | |
| | | &usdhc2 { |
| | | - pinctrl-names = "default"; |
| | | - pinctrl-0 = <&pinctrl_usdhc2>; |
| | | + pinctrl-names = "default"; |
| | | + pinctrl-0 = <&pinctrl_usdhc2>; |
| | | non-removable; |
| | | keep-power-in-suspend; |
| | | wakeup-source; |
| | | - status = "okay"; |
| | | + status = "disabled"; /* Not used */ |
| | | }; |
| | | |
| | | &wdog1 { |
| | | @@ -463,6 +515,18 @@ |
| | | @@ -463,6 +554,25 @@ |
| | | &iomuxc { |
| | | pinctrl-names = "default"; |
| | | |
| | |
| | | + >; |
| | | + }; |
| | | + |
| | | + pinctrl_ts_pins: pinctrl-ts-pins { |
| | | + fsl,pins = < |
| | | + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 /* TouchScreen IRQ */ |
| | | + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 /* TouchScreen RST */ |
| | | + >; |
| | | + }; |
| | | + |
| | | pinctrl_csi1: csi1grp { |
| | | fsl,pins = < |
| | | MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 |
| | | @@ -490,6 +554,7 @@ |
| | | @@ -490,6 +600,7 @@ |
| | | MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 |
| | | MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 |
| | | MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 |
| | | + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10B0 /* ENET1 RESET conflict with pinctrl_spi4 */ |
| | | + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10B0 /* ENET1 RESET conflict with pinctrl_spi4 */ |
| | | >; |
| | | }; |
| | | |
| | | @@ -505,6 +570,7 @@ |
| | | @@ -505,6 +616,7 @@ |
| | | MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 |
| | | MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 |
| | | MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 |
| | |
| | | >; |
| | | }; |
| | | |
| | | @@ -594,7 +660,6 @@ |
| | | @@ -594,19 +706,18 @@ |
| | | MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 |
| | | MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 |
| | | MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 |
| | |
| | | >; |
| | | }; |
| | | |
| | | @@ -610,6 +675,12 @@ |
| | | - pinctrl_peri_3v3: peri3v3grp { |
| | | + pinctrl_pwm1: pwm1grp { |
| | | fsl,pins = < |
| | | - MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 |
| | | + MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 |
| | | >; |
| | | }; |
| | | |
| | | - pinctrl_pwm1: pwm1grp { |
| | | + pinctrl_pwm2: pwm2grp { |
| | | + fsl,pins = < |
| | | + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x110b0 |
| | | + >; |
| | | + }; |
| | | + |
| | | pinctrl_sim2: sim2grp { |
| | | fsl,pins = < |
| | | MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808 |
| | | @@ -625,7 +696,6 @@ |
| | | - MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 |
| | | + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x110b0 |
| | | >; |
| | | }; |
| | | |
| | | @@ -625,7 +736,6 @@ |
| | | fsl,pins = < |
| | | MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 |
| | | MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 |
| | |
| | | MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 |
| | | >; |
| | | }; |
| | | @@ -679,8 +749,6 @@ |
| | | @@ -678,9 +788,7 @@ |
| | | MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 |
| | | MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 |
| | | MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 |
| | | MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ |
| | | - MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ |
| | | - MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ |
| | | - MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ |
| | | + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ |
| | | >; |
| | | }; |
| | | |
| | | diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/imx6ul.dtsi linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi |
| | | --- linux-imx/arch/arm/boot/dts/imx6ul.dtsi 2021-09-08 18:41:11.000000000 +0800 |
| | | +++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi 2021-11-17 20:39:10.582219267 +0800 |
| | | +++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi 2021-11-23 19:45:27.875382794 +0800 |
| | | @@ -727,6 +727,7 @@ |
| | | offset = <0x34>; |
| | | interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, |
| | |
| | | snvs_poweroff: snvs-poweroff { |
| | | diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/.cfg-imx6ull linux-imx-imx6ull/.cfg-imx6ull |
| | | --- linux-imx/.cfg-imx6ull 1970-01-01 08:00:00.000000000 +0800 |
| | | +++ linux-imx-imx6ull/.cfg-imx6ull 2021-11-17 23:54:02.719749912 +0800 |
| | | @@ -0,0 +1,6910 @@ |
| | | +++ linux-imx-imx6ull/.cfg-imx6ull 2021-11-23 20:06:37.849363291 +0800 |
| | | @@ -0,0 +1,6819 @@ |
| | | +# |
| | | +# Automatically generated file; DO NOT EDIT. |
| | | +# Linux/arm 5.10.52 Kernel Configuration |
| | |
| | | +# |
| | | +# Userland interfaces |
| | | +# |
| | | +# CONFIG_INPUT_MOUSEDEV is not set |
| | | +CONFIG_INPUT_MOUSEDEV=y |
| | | +CONFIG_INPUT_MOUSEDEV_PSAUX=y |
| | | +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 |
| | | +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 |
| | | +# CONFIG_INPUT_JOYDEV is not set |
| | | +CONFIG_INPUT_EVDEV=y |
| | | +CONFIG_INPUT_EVBUG=m |
| | | +# CONFIG_INPUT_EVBUG is not set |
| | | + |
| | | +# |
| | | +# Input Device Drivers |
| | |
| | | +# CONFIG_KEYBOARD_XTKBD is not set |
| | | +# CONFIG_KEYBOARD_CAP11XX is not set |
| | | +# CONFIG_KEYBOARD_BCM is not set |
| | | +CONFIG_INPUT_MOUSE=y |
| | | +CONFIG_MOUSE_PS2=m |
| | | +CONFIG_MOUSE_PS2_ALPS=y |
| | | +CONFIG_MOUSE_PS2_BYD=y |
| | | +CONFIG_MOUSE_PS2_LOGIPS2PP=y |
| | | +CONFIG_MOUSE_PS2_SYNAPTICS=y |
| | | +CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y |
| | | +CONFIG_MOUSE_PS2_CYPRESS=y |
| | | +CONFIG_MOUSE_PS2_TRACKPOINT=y |
| | | +CONFIG_MOUSE_PS2_ELANTECH=y |
| | | +CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y |
| | | +# CONFIG_MOUSE_PS2_SENTELIC is not set |
| | | +# CONFIG_MOUSE_PS2_TOUCHKIT is not set |
| | | +CONFIG_MOUSE_PS2_FOCALTECH=y |
| | | +CONFIG_MOUSE_PS2_SMBUS=y |
| | | +# CONFIG_MOUSE_SERIAL is not set |
| | | +# CONFIG_MOUSE_APPLETOUCH is not set |
| | | +# CONFIG_MOUSE_BCM5974 is not set |
| | | +# CONFIG_MOUSE_CYAPA is not set |
| | | +# CONFIG_MOUSE_ELAN_I2C is not set |
| | | +# CONFIG_MOUSE_VSXXXAA is not set |
| | | +# CONFIG_MOUSE_GPIO is not set |
| | | +# CONFIG_MOUSE_SYNAPTICS_I2C is not set |
| | | +# CONFIG_MOUSE_SYNAPTICS_USB is not set |
| | | +# CONFIG_INPUT_MOUSE is not set |
| | | +# CONFIG_INPUT_JOYSTICK is not set |
| | | +# CONFIG_INPUT_TABLET is not set |
| | | +CONFIG_INPUT_TOUCHSCREEN=y |
| | | +CONFIG_TOUCHSCREEN_PROPERTIES=y |
| | | +CONFIG_TOUCHSCREEN_ADS7846=y |
| | | +CONFIG_TOUCHSCREEN_CT36X_WLD=y |
| | | +# CONFIG_TOUCHSCREEN_ADS7846 is not set |
| | | +# CONFIG_TOUCHSCREEN_CT36X_WLD is not set |
| | | +# CONFIG_TOUCHSCREEN_AD7877 is not set |
| | | +CONFIG_TOUCHSCREEN_AD7879=y |
| | | +CONFIG_TOUCHSCREEN_AD7879_I2C=y |
| | | +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set |
| | | +# CONFIG_TOUCHSCREEN_AD7879 is not set |
| | | +# CONFIG_TOUCHSCREEN_ADC is not set |
| | | +# CONFIG_TOUCHSCREEN_AR1021_I2C is not set |
| | | +CONFIG_TOUCHSCREEN_ATMEL_MXT=y |
| | | +# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set |
| | | +# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set |
| | | +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set |
| | | +# CONFIG_TOUCHSCREEN_BU21013 is not set |
| | | +# CONFIG_TOUCHSCREEN_BU21029 is not set |
| | |
| | | +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set |
| | | +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set |
| | | +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set |
| | | +CONFIG_TOUCHSCREEN_DA9052=y |
| | | +# CONFIG_TOUCHSCREEN_DA9052 is not set |
| | | +# CONFIG_TOUCHSCREEN_DYNAPRO is not set |
| | | +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set |
| | | +# CONFIG_TOUCHSCREEN_EETI is not set |
| | | +CONFIG_TOUCHSCREEN_EGALAX=y |
| | | +# CONFIG_TOUCHSCREEN_EGALAX is not set |
| | | +# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set |
| | | +# CONFIG_TOUCHSCREEN_EXC3000 is not set |
| | | +CONFIG_TOUCHSCREEN_ELAN_TS=y |
| | | +# CONFIG_TOUCHSCREEN_ELAN_TS is not set |
| | | +# CONFIG_TOUCHSCREEN_FUJITSU is not set |
| | | +CONFIG_TOUCHSCREEN_GOODIX=y |
| | | +# CONFIG_TOUCHSCREEN_HIDEEP is not set |
| | | +CONFIG_TOUCHSCREEN_ILI210X=y |
| | | +# CONFIG_TOUCHSCREEN_ILI210X is not set |
| | | +# CONFIG_TOUCHSCREEN_S6SY761 is not set |
| | | +# CONFIG_TOUCHSCREEN_GUNZE is not set |
| | | +# CONFIG_TOUCHSCREEN_EKTF2127 is not set |
| | |
| | | +# CONFIG_TOUCHSCREEN_ELO is not set |
| | | +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set |
| | | +# CONFIG_TOUCHSCREEN_WACOM_I2C is not set |
| | | +CONFIG_TOUCHSCREEN_MAX11801=y |
| | | +# CONFIG_TOUCHSCREEN_MAX11801 is not set |
| | | +# CONFIG_TOUCHSCREEN_MCS5000 is not set |
| | | +# CONFIG_TOUCHSCREEN_MMS114 is not set |
| | | +# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set |
| | | +# CONFIG_TOUCHSCREEN_MTOUCH is not set |
| | | +CONFIG_TOUCHSCREEN_IMX6UL_TSC=y |
| | | +# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set |
| | | +# CONFIG_TOUCHSCREEN_INEXIO is not set |
| | | +# CONFIG_TOUCHSCREEN_MK712 is not set |
| | | +# CONFIG_TOUCHSCREEN_PENMOUNT is not set |
| | | +CONFIG_TOUCHSCREEN_EDT_FT5X06=y |
| | | +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set |
| | | +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set |
| | | +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set |
| | | +# CONFIG_TOUCHSCREEN_PIXCIR is not set |
| | | +# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set |
| | | +# CONFIG_TOUCHSCREEN_WM97XX is not set |
| | | +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set |
| | | +CONFIG_TOUCHSCREEN_MC13783=y |
| | | +# CONFIG_TOUCHSCREEN_MC13783 is not set |
| | | +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set |
| | | +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set |
| | | +CONFIG_TOUCHSCREEN_TSC200X_CORE=y |
| | | +CONFIG_TOUCHSCREEN_TSC2004=y |
| | | +# CONFIG_TOUCHSCREEN_TSC2004 is not set |
| | | +# CONFIG_TOUCHSCREEN_TSC2005 is not set |
| | | +CONFIG_TOUCHSCREEN_TSC2007=y |
| | | +# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set |
| | | +# CONFIG_TOUCHSCREEN_TSC2007 is not set |
| | | +# CONFIG_TOUCHSCREEN_RM_TS is not set |
| | | +# CONFIG_TOUCHSCREEN_SILEAD is not set |
| | | +# CONFIG_TOUCHSCREEN_SIS_I2C is not set |
| | | +# CONFIG_TOUCHSCREEN_ST1232 is not set |
| | | +# CONFIG_TOUCHSCREEN_STMFTS is not set |
| | | +CONFIG_TOUCHSCREEN_STMPE=y |
| | | +# CONFIG_TOUCHSCREEN_STMPE is not set |
| | | +# CONFIG_TOUCHSCREEN_SUR40 is not set |
| | | +# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set |
| | | +CONFIG_TOUCHSCREEN_SX8654=y |
| | | +# CONFIG_TOUCHSCREEN_SX8654 is not set |
| | | +# CONFIG_TOUCHSCREEN_TPS6507X is not set |
| | | +# CONFIG_TOUCHSCREEN_ZET6223 is not set |
| | | +# CONFIG_TOUCHSCREEN_ZFORCE is not set |
| | | +CONFIG_TOUCHSCREEN_COLIBRI_VF50=y |
| | | +# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set |
| | | +# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set |
| | | +# CONFIG_TOUCHSCREEN_IQS5XX is not set |
| | | +# CONFIG_TOUCHSCREEN_ZINITIX is not set |
| | | +CONFIG_TOUCHSCREEN_SYNAPTICS_DSX=y |
| | | +# CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_I2C is not set |
| | | +CONFIG_TOUCHSCREEN_FTS=y |
| | | +CONFIG_TOUCHSCREEN_FTS_DIRECTORY="focaltech_touch" |
| | | +CONFIG_INPUT_MISC=y |
| | | +# CONFIG_INPUT_AD714X is not set |
| | | +# CONFIG_INPUT_ATMEL_CAPTOUCH is not set |
| | | +# CONFIG_INPUT_BMA150 is not set |
| | | +# CONFIG_INPUT_E3X0_BUTTON is not set |
| | | +# CONFIG_INPUT_MC13783_PWRBUTTON is not set |
| | | +CONFIG_INPUT_MMA8450=y |
| | | +# CONFIG_INPUT_GPIO_BEEPER is not set |
| | | +# CONFIG_INPUT_GPIO_DECODER is not set |
| | | +# CONFIG_INPUT_GPIO_VIBRA is not set |
| | | +# CONFIG_INPUT_ATI_REMOTE2 is not set |
| | | +# CONFIG_INPUT_KEYSPAN_REMOTE is not set |
| | | +# CONFIG_INPUT_KXTJ9 is not set |
| | | +# CONFIG_INPUT_POWERMATE is not set |
| | | +# CONFIG_INPUT_YEALINK is not set |
| | | +# CONFIG_INPUT_CM109 is not set |
| | | +# CONFIG_INPUT_REGULATOR_HAPTIC is not set |
| | | +# CONFIG_INPUT_UINPUT is not set |
| | | +# CONFIG_INPUT_PCF8574 is not set |
| | | +# CONFIG_INPUT_PWM_BEEPER is not set |
| | | +# CONFIG_INPUT_PWM_VIBRA is not set |
| | | +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set |
| | | +# CONFIG_INPUT_DA9052_ONKEY is not set |
| | | +# CONFIG_INPUT_DA9063_ONKEY is not set |
| | | +# CONFIG_INPUT_ADXL34X is not set |
| | | +# CONFIG_INPUT_IMS_PCU is not set |
| | | +# CONFIG_INPUT_IQS269A is not set |
| | | +# CONFIG_INPUT_CMA3000 is not set |
| | | +# CONFIG_INPUT_DRV260X_HAPTICS is not set |
| | | +# CONFIG_INPUT_DRV2665_HAPTICS is not set |
| | | +# CONFIG_INPUT_DRV2667_HAPTICS is not set |
| | | +CONFIG_INPUT_MPL3115=y |
| | | +CONFIG_SENSOR_FXLS8471=y |
| | | +CONFIG_SENSOR_IMX_RPMSG=y |
| | | +CONFIG_INPUT_ISL29023=y |
| | | +# CONFIG_TOUCHSCREEN_SYNAPTICS_DSX is not set |
| | | +# CONFIG_TOUCHSCREEN_FTS is not set |
| | | +# CONFIG_INPUT_MISC is not set |
| | | +# CONFIG_RMI4_CORE is not set |
| | | + |
| | | +# |
| | | +# Hardware I/O ports |
| | | +# |
| | | +CONFIG_SERIO=y |
| | | +CONFIG_SERIO_SERPORT=m |
| | | +# CONFIG_SERIO_SERPORT is not set |
| | | +# CONFIG_SERIO_PCIPS2 is not set |
| | | +CONFIG_SERIO_LIBPS2=y |
| | | +# CONFIG_SERIO_RAW is not set |
| | |
| | | +# CONFIG_BATTERY_MAX17040 is not set |
| | | +# CONFIG_BATTERY_MAX17042 is not set |
| | | +# CONFIG_CHARGER_ISP1704 is not set |
| | | +CONFIG_SABRESD_MAX8903=y |
| | | +# CONFIG_CHARGER_MAX8903 is not set |
| | | +# CONFIG_CHARGER_LP8727 is not set |
| | | +# CONFIG_CHARGER_GPIO is not set |
| | |
| | | +# |
| | | +# Webcam devices |
| | | +# |
| | | +CONFIG_USB_VIDEO_CLASS=m |
| | | +CONFIG_USB_VIDEO_CLASS=y |
| | | +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y |
| | | +CONFIG_USB_GSPCA=m |
| | | +CONFIG_USB_GSPCA=y |
| | | +# CONFIG_USB_M5602 is not set |
| | | +# CONFIG_USB_STV06XX is not set |
| | | +# CONFIG_USB_GL860 is not set |
| | |
| | | +# CONFIG_USB_HACKRF is not set |
| | | +# CONFIG_USB_MSI2500 is not set |
| | | +# CONFIG_MEDIA_PCI_SUPPORT is not set |
| | | +CONFIG_RADIO_ADAPTERS=y |
| | | +# CONFIG_RADIO_SI470X is not set |
| | | +# CONFIG_RADIO_SI4713 is not set |
| | | +CONFIG_RADIO_SI476X=y |
| | | +# CONFIG_USB_MR800 is not set |
| | | +# CONFIG_USB_DSBR is not set |
| | | +# CONFIG_RADIO_MAXIRADIO is not set |
| | | +# CONFIG_RADIO_SHARK is not set |
| | | +# CONFIG_RADIO_SHARK2 is not set |
| | | +# CONFIG_USB_KEENE is not set |
| | | +# CONFIG_USB_RAREMONO is not set |
| | | +# CONFIG_USB_MA901 is not set |
| | | +# CONFIG_RADIO_TEA5764 is not set |
| | | +# CONFIG_RADIO_SAA7706H is not set |
| | | +# CONFIG_RADIO_TEF6862 is not set |
| | | +# CONFIG_RADIO_WL1273 is not set |
| | | +# CONFIG_RADIO_ADAPTERS is not set |
| | | +CONFIG_VIDEOBUF2_CORE=y |
| | | +CONFIG_VIDEOBUF2_V4L2=y |
| | | +CONFIG_VIDEOBUF2_MEMOPS=y |
| | |
| | | +# CONFIG_VIDEO_CADENCE is not set |
| | | +# CONFIG_VIDEO_ASPEED is not set |
| | | +CONFIG_VIDEO_MUX=y |
| | | +CONFIG_VIDEO_MXC_CAPTURE=m |
| | | +CONFIG_VIDEO_MXC_CAPTURE=y |
| | | +# CONFIG_VIDEO_MX8_CAPTURE is not set |
| | | +CONFIG_VIDEO_MXC_OUTPUT=y |
| | | +CONFIG_VIDEO_V4L2_MXC_INT_DEVICE=m |
| | | +CONFIG_VIDEO_MXC_CSI_CAMERA=m |
| | | +CONFIG_MXC_VADC=m |
| | | +CONFIG_MXC_MIPI_CSI=m |
| | | +CONFIG_VIDEO_V4L2_MXC_INT_DEVICE=y |
| | | +CONFIG_VIDEO_MXC_CSI_CAMERA=y |
| | | +CONFIG_MXC_VADC=y |
| | | +CONFIG_MXC_MIPI_CSI=y |
| | | + |
| | | +# |
| | | +# MXC Camera/V4L2 PRP Features support |
| | | +# |
| | | +CONFIG_VIDEO_MXC_IPU_CAMERA=y |
| | | +CONFIG_MXC_CAMERA_OV5640=m |
| | | +CONFIG_MXC_CAMERA_OV5640_V2=m |
| | | +# CONFIG_MXC_CAMERA_OV5640 is not set |
| | | +CONFIG_MXC_CAMERA_OV5640_V2=y |
| | | +# CONFIG_MXC_CAMERA_OV5642 is not set |
| | | +CONFIG_MXC_CAMERA_OV5640_MIPI=m |
| | | +CONFIG_MXC_CAMERA_OV5640_MIPI_V2=m |
| | | +# CONFIG_MXC_CAMERA_OV5640_MIPI is not set |
| | | +CONFIG_MXC_CAMERA_OV5640_MIPI_V2=y |
| | | +# CONFIG_MXC_CAMERA_OV5647_MIPI is not set |
| | | +CONFIG_MXC_TVIN_ADV7180=m |
| | | +CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m |
| | | +CONFIG_MXC_IPU_PRP_ENC=m |
| | | +CONFIG_MXC_IPU_CSI_ENC=m |
| | | +# CONFIG_MXC_TVIN_ADV7180 is not set |
| | | +CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=y |
| | | +# CONFIG_MXC_IPU_PRP_VF_SDC is not set |
| | | +CONFIG_MXC_IPU_PRP_ENC=y |
| | | +CONFIG_MXC_IPU_CSI_ENC=y |
| | | +# end of MXC Camera/V4L2 PRP Features support |
| | | + |
| | | +CONFIG_VIDEO_MXC_IPU_OUTPUT=y |
| | |
| | | +# |
| | | +# CD-ROM/DVD Filesystems |
| | | +# |
| | | +CONFIG_ISO9660_FS=m |
| | | +CONFIG_JOLIET=y |
| | | +CONFIG_ZISOFS=y |
| | | +CONFIG_UDF_FS=m |
| | | +# CONFIG_ISO9660_FS is not set |
| | | +# CONFIG_UDF_FS is not set |
| | | +# end of CD-ROM/DVD Filesystems |
| | | + |
| | | +# |
| | | +# DOS/FAT/EXFAT/NT Filesystems |
| | | +# |
| | | +CONFIG_FAT_FS=y |
| | | +CONFIG_MSDOS_FS=m |
| | | +CONFIG_MSDOS_FS=y |
| | | +CONFIG_VFAT_FS=y |
| | | +CONFIG_FAT_DEFAULT_CODEPAGE=437 |
| | | +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" |
| | | +# CONFIG_FAT_DEFAULT_UTF8 is not set |
| | | +# CONFIG_EXFAT_FS is not set |
| | | +# CONFIG_NTFS_FS is not set |
| | | +CONFIG_EXFAT_FS=y |
| | | +CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" |
| | | +CONFIG_NTFS_FS=y |
| | | +# CONFIG_NTFS_DEBUG is not set |
| | | +CONFIG_NTFS_RW=y |
| | | +# end of DOS/FAT/EXFAT/NT Filesystems |
| | | + |
| | | +# |
| | |
| | | +# CONFIG_BEFS_FS is not set |
| | | +# CONFIG_BFS_FS is not set |
| | | +# CONFIG_EFS_FS is not set |
| | | +CONFIG_JFFS2_FS=y |
| | | +CONFIG_JFFS2_FS_DEBUG=0 |
| | | +CONFIG_JFFS2_FS_WRITEBUFFER=y |
| | | +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set |
| | | +# CONFIG_JFFS2_SUMMARY is not set |
| | | +# CONFIG_JFFS2_FS_XATTR is not set |
| | | +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set |
| | | +CONFIG_JFFS2_ZLIB=y |
| | | +CONFIG_JFFS2_RTIME=y |
| | | +CONFIG_UBIFS_FS=y |
| | | +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set |
| | | +CONFIG_UBIFS_FS_LZO=y |
| | | +CONFIG_UBIFS_FS_ZLIB=y |
| | | +CONFIG_UBIFS_FS_ZSTD=y |
| | | +# CONFIG_UBIFS_ATIME_SUPPORT is not set |
| | | +CONFIG_UBIFS_FS_XATTR=y |
| | | +CONFIG_UBIFS_FS_SECURITY=y |
| | | +# CONFIG_UBIFS_FS_AUTHENTICATION is not set |
| | | +# CONFIG_JFFS2_FS is not set |
| | | +# CONFIG_UBIFS_FS is not set |
| | | +# CONFIG_CRAMFS is not set |
| | | +# CONFIG_SQUASHFS is not set |
| | | +# CONFIG_VXFS_FS is not set |
| | |
| | | +# end of Kernel hacking |
| | | diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/Makefile linux-imx-imx6ull/Makefile |
| | | --- linux-imx/Makefile 2021-09-08 18:41:11.000000000 +0800 |
| | | +++ linux-imx-imx6ull/Makefile 2021-11-17 23:50:00.489132691 +0800 |
| | | +++ linux-imx-imx6ull/Makefile 2021-11-23 19:58:23.629972395 +0800 |
| | | @@ -367,7 +367,8 @@ |
| | | # Alternatively CROSS_COMPILE can be set in the environment. |
| | | # Default value for CROSS_COMPILE is not to prefix executables |