imx6ull.git - Gitblit

			@@ -20,20 +20,25 @@
			PRJ_PATH=`pwd`
			PRJ_NAME=`basename ${PRJ_PATH}`

			IMAGE_PATH=${PRJ_PATH}/boot/
			BOARD=igkboard
			BSP_BRANCH=lf-5.10.52-2.1.0

			BOARD=imx6ull
			# SYSTEM should be: buildroot, yocto or debian
			# DISTRO should be: 2021.02, hardknott, buster or bullseye
			# SYSNAME should be: buildroot, yocto, buster or bullseye
			SYSTEM=buildroot
			DISTRO=2021.02
			SYSNAME=buildroot

			# rootfs should be buildroot or stretch/buster/bullseye for debian system
			ROOTFS=buildroot
			ROOTFS_DIR=rootfs_${SYSNAME}

			# linux kernel tarball path and branch
			TAR_PATH=${PRJ_PATH}/../tarball
			IMAGE_PATH=${PRJ_PATH}/boot/

			BOOT=emmc

			IMAGE_NAME=linuxsys_${BOARD}_${ROOTFS}.img
			if [ $ROOTFS == buildroot ] ; then
			IMAGE_NAME=linuxsys_${BOARD}_${SYSNAME}.img
			if [ $SYSTEM == buildroot ] ; then
			IMAGE_SIZE=512
			else
			IMAGE_SIZE=2048
			@@ -50,10 +55,10 @@
			BOOT_SIZE=100


			IMG_UBOOT=${PRJ_PATH}/u-boot-imx6ull-emmc.imx
			IMG_UBOOT=${PRJ_PATH}/u-boot-${BOARD}.imx
			IMG_KERNEL=${IMAGE_PATH}/zImage
			IMG_DTB=${IMAGE_PATH}/imx6ull-emmc.dtb
			ROOTFS_TAR=${TAR_PATH}/rootfs_${ROOTFS}.tar.bz2
			IMG_DTB=${IMAGE_PATH}/${BOARD}-emmc.dtb
			ROOTFS_TAR=${PRJ_PATH}/../rootfs/${ROOTFS_DIR}.tar.bz2

			MNT_POINT=./mnt
			LOOP_DEV=`losetup -f \| cut -d/ -f3`
			@@ -165,6 +170,7 @@

			mount -t ext4 /dev/mapper/${LOOP_DEV}p2 ${MNT_POINT}
			tar -xjf ${ROOTFS_TAR} -C ${MNT_POINT} && sync
			chown -R root.root ${MNT_POINT} && sync

			umount ${MNT_POINT}
			}
			@@ -193,6 +199,7 @@
			install_rootfs

			msg_banner " bzip2 compress system image "
			rm -f ${IMAGE_NAME}*.bz2
			bzip2 ${IMAGE_NAME}

			rm -rf ${MNT_POINT}