update linux kernel patch, fix touchscreen not work bug; update u-boot patc...

guowenxue

2019-08-02 fb6b7648626cfb7502e9478461a3e757673bb70e

 ok335xD/linux-bsp/patches/u-boot-2011.09-ok335x.patch

@@ -1,12 +1,12 @@
diff -Nuar u-boot-2011.09/build.sh u-boot-2011.09-ok335x/build.sh
--- u-boot-2011.09/build.sh   1970-01-01 08:00:00.000000000 +0800
+++ u-boot-2011.09-ok335x/build.sh   2019-07-28 19:46:24.408884985 +0800
+++ u-boot-2011.09-ok335x/build.sh   2019-08-01 23:06:07.067744283 +0800
@@ -0,0 +1,66 @@
+#!/bin/bash
+
+TFTP_PATH=/tftp
+IMGS_PATH=../images
+IMG_NAME=u-boot.img
+IMG_NAME="u-boot.img MLO"
+
+CROSSTOOL=/opt/crosstool/cortex-a7/bin/arm-linux-gnueabi-
+JOBS=`cat /proc/cpuinfo |grep "processor"|wc -l`
@@ -39,7 +39,7 @@
+
+    chmod a-x u-boot
+
+    chmod a+x MLO ${IMG_NAME}
+    chmod a+x ${IMG_NAME}
+}
+
+function do_install()
@@ -68,9 +68,280 @@
+do_install
+
+
diff -Nuar u-boot-2011.09/common/cmd_led_flash.c u-boot-2011.09-ok335x/common/cmd_led_flash.c
--- u-boot-2011.09/common/cmd_led_flash.c   2014-01-18 11:05:20.000000000 +0800
+++ u-boot-2011.09-ok335x/common/cmd_led_flash.c   2019-08-01 23:06:07.067744283 +0800
@@ -13,6 +13,11 @@
 
 extern int g_on;
 
+void lcd_backlight_on(void)
+{
+    __raw_writel(1<<7, 0x44E07194);
+}
+
 void update_led()
 {
    static u32 n = 0;
diff -Nuar u-boot-2011.09/drivers/video/cfb_console.c u-boot-2011.09-ok335x/drivers/video/cfb_console.c
--- u-boot-2011.09/drivers/video/cfb_console.c   2013-12-04 14:05:19.000000000 +0800
+++ u-boot-2011.09-ok335x/drivers/video/cfb_console.c   2019-08-01 23:06:07.067744283 +0800
@@ -1820,7 +1820,7 @@
 
    return 0;
 }
-int g_on = 0;
+int g_on = 1;
 void show_process(unsigned long a,unsigned long b)
 {
    static int last_percent = 100,type = 0;
@@ -1833,6 +1833,7 @@
    if(percent != last_percent)
    {
       update_led();
+        lcd_backlight_on();
 			
       /*update uart console*/
       printf("\r%02d%% complete",percent);
@@ -1849,34 +1850,19 @@
          switch(type)
          {
          case 0:
-            title = "Erasing nand chip............";
+            title = "Burning Env to nand...";
             break;
          case 1:
-            title = "Reading MLO from MMC.........";
+            title = "Burning bootloader to nand...";
             break;
          case 2:
-            title = "Burning MLO to nand..........";
-            break;
-         case 3:
-            title = "Reading u-boot.img from MMC..";
-            break;
-         case 4:
-            title = "Burning u-boot.img to nand...";
-            break;
-         case 5:
-            title = "Reading uImage from MMC......";
-            break;
-         case 6:
             title = "Burning uImage to nand.......";
             break;
-         case 7:
-            title = "Reading ubi.img from MMC.....";
-            break;
-         case 8:
+         case 3:
             title = "Burning ubi.img to nand......";
             break;
          default:
-            title = "env is null..................";
+            title = "env TYPE is null..................";
             break;
          }
 			
diff -Nuar u-boot-2011.09/include/configs/ok335x.h u-boot-2011.09-ok335x/include/configs/ok335x.h
--- u-boot-2011.09/include/configs/ok335x.h   2014-01-23 09:45:03.000000000 +0800
+++ u-boot-2011.09-ok335x/include/configs/ok335x.h   2019-08-02 00:26:56.203837301 +0800
@@ -61,17 +61,11 @@
    "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
    "nandrootfstype=ubifs rootwait=1\0" 
 #else
-#define CON      \
-   "console=ttyO0,115200n8\0" \
-   "optargs=\0" \
-   "mmcroot=/dev/mmcblk0p2 ro\0" \
-   "mmcrootfstype=ext3 rootwait\0" \
-   "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
-   "nandrootfstype=ubifs rootwait=1\0" 
+#define CON      "console=ttyO0,115200n8\0" 
 #endif
 
 /* set to negative value for no autoboot */
-#define CONFIG_BOOTDELAY      3
+#define CONFIG_BOOTDELAY      1
 
 #define CONFIG_MMC
 #define CONFIG_NAND
@@ -81,141 +75,32 @@
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 
+#define CONFIG_BOOTARGS    "console=ttyO0,115200n8 root=ubi0:rootfs rw ubi.mtd=4,2048 rootfstype=ubifs rootwait=1"
+#define CONFIG_BOOTCOMMAND "run confaddr; nandecc hw 2; nand read ${loadaddr} ${kernaddr} ${kernsize}; bootm ${loadaddr}"
+#define CONFIG_IPADDR      192.168.2.222
+#define CONFIG_SERVERIP    192.168.2.2
+#define CONFIG_BOOTFILE    uImage
+#define CONFIG_LOADADDR    0x80200000
 
-#if 1
 #define CONFIG_EXTRA_ENV_SETTINGS \
-   CON   \
-   "screentype=R\0"\
-   "screensize=800x480-7\0"\
-   "loadaddr=0x80200000\0" \
-   "kloadaddr=0x80007fc0\0" \
-   "fdtaddr=0x80F80000\0" \
-   "fdt_high=0xffffffff\0" \
-   "rdaddr=0x81000000\0" \
-   "bootdev=MMC\0"\
-   "bootfile=uImage\0" \
-   "fdtfile=\0" \
-   "mmcdev=0\0" \
-   "nandsrcaddr=0x280000\0" \
-   "nandimgsize=0x500000\0" \
-   "rootpath=/export/rootfs\0" \
-   "nfsopts=nolock\0" \
-   "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-      "::off\0" \
-   "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
-   "ramrootfstype=ext2\0" \
-   "ip_method=none\0" \
-   "bootargs_defaults=setenv bootargs " \
-      "console=${console} " \
-      "${optargs}\0" \
-   "mmcargs=run bootargs_defaults;" \
-      "setenv bootargs ${bootargs} " \
-      "root=${mmcroot} " \
-      "rootfstype=${mmcrootfstype} ip=${ip_method} screentype=${screentype} screensize=${screensize}\0" \
-   "nandargs=setenv bootargs console=${console} " \
-      "${optargs} " \
-      "root=${nandroot} " \
-      "rootfstype=${nandrootfstype} screentype=${screentype} screensize=${screensize}\0" \
-   "spiroot=/dev/mtdblock4 rw\0" \
-   "spirootfstype=jffs2\0" \
-   "spisrcaddr=0xe0000\0" \
-   "spiimgsize=0x362000\0" \
-   "spibusno=0\0" \
-   "spiargs=setenv bootargs console=${console} " \
-      "${optargs} " \
-      "root=${spiroot} " \
-      "rootfstype=${spirootfstype}\0" \
-   "netargs=setenv bootargs console=${console} " \
-      "${optargs} " \
-      "root=/dev/nfs " \
-      "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
-      "ip=dhcp\0" \
-   "bootenv=uEnv.txt\0" \
-   "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-   "importbootenv=echo Importing environment from mmc ...; " \
-      "env import -t $loadaddr $filesize\0" \
-   "ramargs=setenv bootargs console=${console} " \
-      "${optargs} " \
-      "root=${ramroot} " \
-      "rootfstype=${ramrootfstype}\0" \
-   "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-   "loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \
-   "loaduimage=ext2load mmc ${mmcdev}:2 ${kloadaddr} /boot/${bootfile}\0" \
-   "mmcboot=echo Booting from mmc ...; " \
-      "run mmcargs; " \
-      "bootm ${kloadaddr}\0" \
-   "nandboot=echo Booting from nand ...; " \
-      "run nandargs; " \
-      "nandecc hw 2;"\
-      "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
-      "bootm ${loadaddr}\0" \
-   "spiboot=echo Booting from spi ...; " \
-      "run spiargs; " \
-      "sf probe ${spibusno}:0; " \
-      "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
-      "bootm ${loadaddr}\0" \
-   "netboot=echo Booting from network ...; " \
-      "setenv autoload no; " \
-      "dhcp; " \
-      "tftp ${loadaddr} ${bootfile}; " \
-      "run netargs; " \
-      "bootm ${loadaddr}\0" \
-   "ramboot=echo Booting from ramdisk ...; " \
-      "run ramargs; " \
-      "bootm ${loadaddr}\0" \
-   "findfdt="\
-      "if test $board_name = A335BONE; then " \
-         "setenv fdtfile am335x-bone.dtb; fi; " \
-      "if test $board_name = A33515BB; then " \
-         "setenv fdtfile am335x-evm.dtb; fi; " \
-      "if test $board_name = A335X_SK; then " \
-         "setenv fdtfile am335x-evmsk.dtb; fi\0" \
-    "auto_update_nand=  echo ---------------Begin update system to Nand---------------;led all on;"\
-             "setenv TYPE 0;nand erase.chip;mmc rescan; "\
-                "setenv TYPE 1;fatload mmc 0 80A00000 MLO;       setenv TYPE 2;nandecc hw 2;nand write.i 80A00000 0 ${filesize}; "\
-            "setenv TYPE 3;fatload mmc 0 80A00000 u-boot.img;setenv TYPE 4;nandecc hw 2;nand write.i 80A00000 80000 ${filesize}; "\
-                "setenv TYPE 5;fatload mmc 0 80A00000 uImage;    setenv TYPE 6;nandecc hw 2;nand write.i 80A00000 280000 ${filesize}; "\
-                "setenv TYPE 7;fatload mmc 0 80A00000 ubi.img;    setenv TYPE 8;nandecc sw;nand write.i 80A00000 780000 ${filesize};"\
-                "echo ;"\
-                "echo --------------Update system to Nand success--------------;led flash all;\0"\
-    "update_nand=  echo ---------------Begin update system to Nand---------------;led all on;"\
-             "setenv TYPE 0;nand erase.chip;mmc rescan; "\
-                "setenv TYPE 1;fatload mmc 0 80A00000 MLO;       setenv TYPE 2;nandecc hw 2;nand write.i 80A00000 0 ${filesize}; "\
-            "setenv TYPE 3;fatload mmc 0 80A00000 u-boot.img;setenv TYPE 4;nandecc hw 2;nand write.i 80A00000 80000 ${filesize}; "\
-            "setenv TYPE 5;fatload mmc 0 80A00000 uImage;    setenv TYPE 6;nandecc hw 2;nand write.i 80A00000 280000 ${filesize}; "\
-                "setenv TYPE 7;fatload mmc 0 80A00000 ubi.img;    setenv TYPE 8;nandecc sw;nand write.i 80A00000 780000 ${filesize};"\
-                "echo ;"\
-                "echo --------------Update system to Nand success--------------;led all off;"\
-                
-
-#define CONFIG_BOOTCOMMAND \
-   " if test $bootdev = MMC; then " \
-      "mmc dev ${mmcdev}; mmc rescan;"\
-      "echo SD/MMC found on device ${mmcdev};" \
-      "if run loadbootenv; then " \
-         "echo Loaded environment from ${bootenv};" \
-         "run importbootenv;" \
-      "fi;" \
-      "if test -n $uenvcmd; then " \
-         "echo Running uenvcmd ...;" \
-         "run uenvcmd;" \
-      "fi;" \
-      "if run loaduimagefat; then " \
-         "run mmcboot;" \
-      "elif run loaduimage; then " \
-         "run mmcboot;" \
-      "else " \
-         "echo Could not find ${bootfile} ;" \
-      "fi;" \
-   "else " \
-      "run nandboot;" \
-   "fi;" \
-	
-#else
-#define CONFIG_BOOTARGS "console=ttyO0,115200n8 earlyprintk ubi.mtd=7,2048 root=ubi0:rootfs rootfstype=ubifs init=/init androidboot.console=ttyO0"
-#define CONFIG_BOOTCOMMAND "nandecc hw 2;nand read.i 80007fc0 280000 400000;bootm 80007fc0"
-#endif
+    "screentype=C\0" \
+    "screensize=800x480-7\0" \
+    "confaddr=set spladdr 0x0; set ubootaddr 0x80000; set envaddr 0xc0000; set envsize 0x40000; " \
+        "set kernaddr 0x100000; set kernsize 0x500000; set rootaddr 0x600000; set rootsize 0x9600000 \0" \
+    "confimgs=set spl 'MLO'; set uboot 'u-boot.img'; set kernel 'uImage'; set rootfs 'ubifs.img' \0" \
+    "conf=run confaddr; run confimgs; set filesize 0x20000; \0" \
+    "benv=run confaddr; set TYPE 0; nandecc hw 0; nand erase ${envaddr} ${envsize}; save\0" \
+    "bbl=run conf; set TYPE 1; nand erase 0 100000; tftp ${loadaddr} ${spl}; " \
+        "nandecc hw 2; nand write.i ${loadaddr} ${spladdr} ${filesize}; " \
+        "tftp ${uboot}; nandecc hw 2;nand write.i ${loadaddr} ${ubootaddr} ${filesize}\0" \
+    "bkr=run conf; set TYPE 2; tftp ${loadaddr} ${kernel}; nand erase ${kernaddr} ${kernsize}; "\
+        "nandecc hw 2; nand write.i ${loadaddr} ${kernaddr} ${filesize}\0" \
+    "bfs=run conf; set TYPE 3; tftp ${loadaddr} ${rootfs}; nand erase ${rootaddr} ${rootsize}; "\
+        "nandecc hw 2; nand write.i ${loadaddr} ${rootaddr} ${filesize}\0" \
+    "bsys=nand scrub.chip; run conf; run bbl; run bkr; run bfs; reset\0" \
+    "tb=run conf; tftp ${loadaddr} ${kernel}; bootm ${loadaddr} \0"
 
+	
 #define CONFIG_MISC_INIT_R
 #define CONFIG_SYS_AUTOLOAD      "yes"
 #define CONFIG_CMD_CACHE
@@ -412,7 +297,7 @@
 #define CONFIG_SYS_MONITOR_LEN      (256 << 10) /* Reserve 2 sectors */
 #define CONFIG_SYS_FLASH_BASE      PISMO1_NAND_BASE
 #define CONFIG_SYS_MONITOR_BASE      CONFIG_SYS_FLASH_BASE
-#define MNAND_ENV_OFFSET      0x260000 /* environment starts here */
+#define MNAND_ENV_OFFSET          0xC0000 /* environment starts here */
 #define CONFIG_SYS_ENV_SECT_SIZE   (128 << 10)   /* 128 KiB */
 #define CONFIG_ENV_OFFSET      MNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR         MNAND_ENV_OFFSET
diff -Nuar u-boot-2011.09/Makefile u-boot-2011.09-ok335x/Makefile
--- u-boot-2011.09/Makefile   2013-11-20 14:14:16.000000000 +0800
+++ u-boot-2011.09-ok335x/Makefile   2019-07-28 19:44:58.332883333 +0800
+++ u-boot-2011.09-ok335x/Makefile   2019-08-01 23:06:07.071744283 +0800
@@ -155,6 +155,8 @@
 # load ARCH, BOARD, and CPU configuration
 include $(obj)include/config.mk