update linux patch for ov5640 dts, ov5640 can work normal on 64x480

guowenxue

2021-11-23 89e9f58c817a3c2b2ed4f4c363cd90bf5d1fea0a

update linux patch for ov5640 dts, ov5640 can work normal on 64x480

 bsp/kernel/patch/linux-imx-imx6ull.patch

@@ -1,6 +1,6 @@
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
--- linux-imx/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi    2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi    2021-11-21 01:03:31.733719397 +0800
+++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi    2021-11-23 19:58:00.218178392 +0800
@@ -31,7 +31,41 @@
         brightness-levels = <0 4 8 16 32 64 128 255>;
         default-brightness-level = <6>;
@@ -65,7 +65,32 @@
         /*
          * If you want to want to make this dynamic please
          * check schematics and test all affected peripherals:
@@ -142,7 +173,7 @@
@@ -78,6 +109,24 @@
         gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
     };
 
+    reg_3p3v: 3p3v {
+        compatible = "regulator-fixed";
+        regulator-name = "3P3V";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+        regulator-boot-on;
+        regulator-always-on;
+    };
+
+    reg_1p8v: 1p8v {
+        compatible = "regulator-fixed";
+        regulator-name = "1P8V";
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+        regulator-boot-on;
+        regulator-always-on;
+    };
+
     sound {
         compatible = "simple-audio-card";
         simple-audio-card,name = "mx6ul-wm8960";
@@ -142,7 +191,7 @@
         compatible = "spi-gpio";
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_spi4>;
@@ -74,7 +99,7 @@
         pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
         gpio-sck = <&gpio5 11 0>;
         gpio-mosi = <&gpio5 10 0>;
@@ -169,7 +200,7 @@
@@ -169,7 +218,7 @@
 };
 
 &csi {
@@ -83,7 +108,7 @@
 
     port {
         csi1_ep: endpoint {
@@ -184,6 +215,26 @@
@@ -184,6 +233,26 @@
     pinctrl-0 = <&pinctrl_i2c2>;
     status = "okay";
 
@@ -110,7 +135,7 @@
     codec: wm8960@1a {
         #sound-dai-cells = <0>;
         compatible = "wlf,wm8960";
@@ -192,7 +243,8 @@
@@ -192,7 +261,8 @@
         wlf,hp-cfg = <3 2 3>;
         wlf,gpio-cfg = <1 3>;
         clocks = <&clks IMX6UL_CLK_SAI2>;
@@ -120,12 +145,18 @@
     };
 
     ov5640: ov5640@3c {
@@ -202,12 +254,13 @@
@@ -202,12 +272,19 @@
         pinctrl-0 = <&pinctrl_csi1>;
         clocks = <&clks IMX6UL_CLK_CSI>;
         clock-names = "csi_mclk";
-        pwn-gpios = <&gpio_spi 6 1>;
-        rst-gpios = <&gpio_spi 5 0>;
+
+        DOVDD-supply = <&reg_3p3v>;
+        VDD-supply = <&reg_1p8v>;
+        AVDD-supply = <&reg_3p3v>;
+        DVDD-supply = <&reg_3p3v>;
+
+        pwn-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+        rst-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
         csi_id = <0>;
@@ -137,7 +168,7 @@
         port {
             ov5640_ep: endpoint {
                 remote-endpoint = <&csi1_ep>;
@@ -222,6 +275,9 @@
@@ -222,6 +299,9 @@
     phy-mode = "rmii";
     phy-handle = <&ethphy0>;
     phy-supply = <&reg_peri_3v3>;
@@ -147,7 +178,7 @@
     status = "okay";
 };
 
@@ -231,14 +287,17 @@
@@ -231,14 +311,17 @@
     phy-mode = "rmii";
     phy-handle = <&ethphy1>;
     phy-supply = <&reg_peri_3v3>;
@@ -167,7 +198,7 @@
             micrel,led-mode = <1>;
             clocks = <&clks IMX6UL_CLK_ENET_REF>;
             clock-names = "rmii-ref";
@@ -301,21 +360,21 @@
@@ -301,21 +384,21 @@
 
     display0: display@0 {
         bits-per-pixel = <16>;
@@ -199,7 +230,7 @@
                 hsync-active = <0>;
                 vsync-active = <0>;
                 de-active = <1>;
@@ -332,6 +391,13 @@
@@ -332,6 +415,13 @@
     status = "okay";
 };
 
@@ -213,7 +244,7 @@
 &pxp {
     status = "okay";
 };
@@ -339,7 +405,7 @@
@@ -339,7 +429,7 @@
 &qspi {
     pinctrl-names = "default";
     pinctrl-0 = <&pinctrl_qspi>;
@@ -222,7 +253,7 @@
 
     flash0: n25q256a@0 {
         #address-cells = <1>;
@@ -360,7 +426,7 @@
@@ -360,7 +450,7 @@
     assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
     assigned-clock-rates = <0>, <12288000>;
     fsl,sai-mclk-direction-output;
@@ -231,7 +262,7 @@
 };
 
 &snvs_poweroff {
@@ -439,6 +505,7 @@
@@ -439,6 +529,7 @@
     pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
     pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
     cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
@@ -239,7 +270,7 @@
     keep-power-in-suspend;
     wakeup-source;
     vmmc-supply = <&reg_sd1_vmmc>;
@@ -446,8 +513,8 @@
@@ -446,8 +537,8 @@
 };
 
 &usdhc2 {
@@ -250,7 +281,7 @@
     non-removable;
     keep-power-in-suspend;
     wakeup-source;
@@ -463,6 +530,25 @@
@@ -463,6 +554,25 @@
 &iomuxc {
     pinctrl-names = "default";
 
@@ -276,7 +307,7 @@
     pinctrl_csi1: csi1grp {
         fsl,pins = <
             MX6UL_PAD_CSI_MCLK__CSI_MCLK        0x1b088
@@ -490,6 +576,7 @@
@@ -490,6 +600,7 @@
             MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00    0x1b0b0
             MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01    0x1b0b0
             MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1    0x4001b031
@@ -284,7 +315,7 @@
         >;
     };
 
@@ -505,6 +592,7 @@
@@ -505,6 +616,7 @@
             MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00    0x1b0b0
             MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01    0x1b0b0
             MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2    0x4001b031
@@ -292,7 +323,7 @@
         >;
     };
 
@@ -594,19 +682,18 @@
@@ -594,19 +706,18 @@
             MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA    0x11088
             MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA    0x11088
             MX6UL_PAD_JTAG_TMS__SAI2_MCLK        0x17088
@@ -316,7 +347,7 @@
         >;
     };
 
@@ -625,7 +712,6 @@
@@ -625,7 +736,6 @@
         fsl,pins = <
             MX6UL_PAD_BOOT_MODE0__GPIO5_IO10    0x70a1
             MX6UL_PAD_BOOT_MODE1__GPIO5_IO11    0x70a1
@@ -324,7 +355,7 @@
             MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08    0x80000000
         >;
     };
@@ -678,9 +764,7 @@
@@ -678,9 +788,7 @@
             MX6UL_PAD_SD1_DATA1__USDHC1_DATA1     0x17059
             MX6UL_PAD_SD1_DATA2__USDHC1_DATA2     0x17059
             MX6UL_PAD_SD1_DATA3__USDHC1_DATA3     0x17059
@@ -337,7 +368,7 @@
 
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/imx6ul.dtsi linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi
--- linux-imx/arch/arm/boot/dts/imx6ul.dtsi    2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi    2021-11-21 00:59:59.079515086 +0800
+++ linux-imx-imx6ull/arch/arm/boot/dts/imx6ul.dtsi    2021-11-23 19:45:27.875382794 +0800
@@ -727,6 +727,7 @@
                     offset = <0x34>;
                     interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
@@ -348,7 +379,7 @@
                 snvs_poweroff: snvs-poweroff {
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/.cfg-imx6ull linux-imx-imx6ull/.cfg-imx6ull
--- linux-imx/.cfg-imx6ull    1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-imx6ull/.cfg-imx6ull    2021-11-21 01:03:45.693634267 +0800
+++ linux-imx-imx6ull/.cfg-imx6ull    2021-11-23 20:06:37.849363291 +0800
@@ -0,0 +1,6819 @@
+#
+# Automatically generated file; DO NOT EDIT.
@@ -7171,7 +7202,7 @@
+# end of Kernel hacking
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/Makefile linux-imx-imx6ull/Makefile
--- linux-imx/Makefile    2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-imx6ull/Makefile    2021-11-21 00:59:59.083515054 +0800
+++ linux-imx-imx6ull/Makefile    2021-11-23 19:58:23.629972395 +0800
@@ -367,7 +367,8 @@
 # Alternatively CROSS_COMPILE can be set in the environment.
 # Default value for CROSS_COMPILE is not to prefix executables