update qt5 build shell script to QT5.6.3

guowenxue

2022-04-16 f6b3c09ebbfe490a18e225b01a9b837da36c9b4f

update qt5 build shell script to QT5.6.3

 3rdparty/QT5/build_QT5.sh

File was deleted

 3rdparty/qt5/build.sh

New file
@@ -0,0 +1,110 @@
#!/bin/bash

#+--------------------------------------------------------------------------------------------
#|Description:  This shell script used download and compile QT5 for ARM
#|     Author:  GuoWenxue <guowenxue@gmail.com>
#|
#|   WARNNING:  QT >= 5.7 need crosstool g++ support C++11 support
#|              QT configure need host g++ support C++11, so need config g++ on ubuntu host:
#|              sudo update-alternatives --config g++
#|
#|  ChangeLog:
#|           1, Initialize 1.0.0 on 2011.04.12
#+--------------------------------------------------------------------------------------------

JOBS=`cat /proc/cpuinfo |grep "processor"|wc -l`

PRJ_PATH=`pwd`
LIBS_PATH=$PRJ_PATH/install

QT_INST_PATH=/apps/qt5_a7

CROSSTOOL=/opt/buildroot/cortexA7/bin/arm-linux-

LYFTP_SRC=ftp://master.iot-yun.club/src/

# display in red
function pr_error() {
    echo -e "\033[40;31m --E-- $1 \033[0m"
}

# display in yellow
function pr_warn() {
    echo -e "\033[40;33m --W-- $1 \033[0m"
}

# display in green
function pr_info() {
    echo -e "\033[40;32m --I-- $1 \033[0m"
}

function msg_banner()
{
    echo ""
    echo "+-----------------------------------------------------------------------"
    echo -e "|\033[40;33m  $1 \033[0m"
    echo "+-----------------------------------------------------------------------"
    echo ""
}

function check_result()
{
    if [ $? != 0 ] ; then
        pr_error $1
    fi
}

function compile_qt5()
{
    # 5.6.3 is the last version can be compiled by g++ without c++11 support
    SRC_NAME=qt-everywhere-opensource-src-5.6.3

    PACK_SUFIX=tar.xz

    #rm -rf ${QT_INST_PATH}/lib/libQt5Gui.so
    if [ -f ${QT_INST_PATH}/lib/libQt5Gui.so ] ; then
        msg_banner "Already cross compile $SRC_NAME "
        return 0;
    fi

    if [ ! -f ${SRC_NAME}.${PACK_SUFIX} ] ; then 
        msg_banner "Start download ${SRC_NAME}.${PACK_SUFIX} "
        wget ${LYFTP_SRC}/qt/${SRC_NAME}.${PACK_SUFIX}
        check_result "download ${SRC_NAME} failure"
    fi

    msg_banner "Start decompress $SRC_NAME.${PACK_SUFIX} and patch"
    if [ ! -d ${SRC_NAME} ] ; then
        tar -xJf ${SRC_NAME}.${PACK_SUFIX}
        patch -p0 < patch/${SRC_NAME}.patch
    fi

    cd ${SRC_NAME}

    QMAKE_FILE=qtbase/mkspecs/linux-arm-gnueabi-g++/qmake.conf

    grep "`dirname ${CROSSTOOL}`" ${QMAKE_FILE} > /dev/null 2>&1
    if [ $? != 0 ] ; then 
        sed -i "s|arm-linux-gnueabi-|$CROSSTOOL|" ${QMAKE_FILE}
    fi 

    export CROSS_SYSROOT=`${CROSSTOOL}gcc -print-sysroot`

    ./configure -opensource -confirm-license -release -shared -strip -c++std c++11 \
        -sysroot ${CROSS_SYSROOT} -pkg-config -extprefix ${QT_INST_PATH} \
        -prefix ${QT_INST_PATH} -xplatform linux-arm-gnueabi-g++ -make libs \
        -no-cups -no-libproxy -no-avx -no-mtdev -no-rpath -no-glib -no-xcb -pch \
        -no-eglfs -no-opengl -no-openssl -no-separate-debug-info -nomake tests \
        -qt-freetype -qt-zlib -qt-libpng -qt-libjpeg -no-tslib -linuxfb -qpa linuxfb \
        -alsa -gstreamer 1.0 -I${QT_INST_PATH}/include/  -L${QT_INST_PATH}/lib/ 

    msg_banner "Start cross compile $SRC_NAME "
    make -j${JOBS} && make install
    check_result "compile ${SRC_NAME} failure"
    cp ./qtbase/plugins/platforms/libqlinuxfb.so  ${QT_INST_PATH}/lib

    cd -
}

compile_qt5


 3rdparty/qt5/patch/qt-everywhere-opensource-src-5.6.3.patch

New file
@@ -0,0 +1,22 @@
diff -Nuar qt-everywhere-opensource-src-5.6.3/qtimageformats/src/plugins/imageformats/jp2/qjp2handler.cpp qt-everywhere-opensource-src-5.6.3-modify/qtimageformats/src/plugins/imageformats/jp2/qjp2handler.cpp
--- qt-everywhere-opensource-src-5.6.3/qtimageformats/src/plugins/imageformats/jp2/qjp2handler.cpp    2017-09-06 20:15:20.000000000 +0800
+++ qt-everywhere-opensource-src-5.6.3-modify/qtimageformats/src/plugins/imageformats/jp2/qjp2handler.cpp    2022-04-16 14:55:15.311442277 +0800
@@ -32,6 +32,7 @@
 **
 ****************************************************************************/
 
+#include <math.h>
 #include "qjp2handler_p.h"
 
 #include "qimage.h"
diff -Nuar qt-everywhere-opensource-src-5.6.3/qtserialbus/src/plugins/canbus/socketcan/socketcanbackend.cpp qt-everywhere-opensource-src-5.6.3-modify/qtserialbus/src/plugins/canbus/socketcan/socketcanbackend.cpp
--- qt-everywhere-opensource-src-5.6.3/qtserialbus/src/plugins/canbus/socketcan/socketcanbackend.cpp    2017-09-06 20:16:43.000000000 +0800
+++ qt-everywhere-opensource-src-5.6.3-modify/qtserialbus/src/plugins/canbus/socketcan/socketcanbackend.cpp    2022-04-16 14:54:53.039634088 +0800
@@ -42,6 +42,7 @@
 
 #include <linux/can/error.h>
 #include <linux/can/raw.h>
+#include <linux/sockios.h>
 #include <errno.h>
 #include <unistd.h>
 #include <net/if.h>

 bsp/kernel/patch/linux-imx-igkboard.patch

@@ -1,7 +1,7 @@
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/igkboard.dts linux-imx-igkboard/arch/arm/boot/dts/igkboard.dts
--- linux-imx/arch/arm/boot/dts/igkboard.dts    1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-igkboard/arch/arm/boot/dts/igkboard.dts    2022-04-14 19:53:27.986034399 +0800
@@ -0,0 +1,801 @@
+++ linux-imx-igkboard/arch/arm/boot/dts/igkboard.dts    2022-03-27 22:09:19.799996369 +0800
@@ -0,0 +1,782 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for LingYun IGKBoard(IoT Gateway Kit Board)
@@ -121,6 +121,7 @@
+        regulator-name = "can-3v3";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+        gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+    };
+
+    reg_3p3v: 3p3v {
@@ -152,87 +153,36 @@
+    };
+*/
+
+    spi4 {
+        compatible = "spi-gpio";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_spi4>;
+        status = "disabled"; /* MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 conflict with fec1 reset pin */
+        pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+        gpio-sck = <&gpio5 11 0>;
+        gpio-mosi = <&gpio5 10 0>;
+        cs-gpios = <&gpio5 7 0>;
+        num-chipselects = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio_spi: gpio@0 {
+            compatible = "fairchild,74hc595";
+            gpio-controller;
+            #gpio-cells = <2>;
+            reg = <0>;
+            registers-number = <1>;
+            registers-default = /bits/ 8 <0x57>;
+            spi-max-frequency = <100000>;
+};
+    };
+};
+
+
+&clks {
+    assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+    assigned-clock-rates = <786432000>;
+};
+
+/* 40Pin Header start */
+&i2c1 {
+    clock-frequency = <100000>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_i2c1>;
+    status = "okay";
+};
+
+&uart2 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_uart2>;
+    status = "okay";
+};
+
+&uart3 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_uart3>;
+    status = "okay";
+};
+
+&uart4 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_uart4>;
+    status = "okay";
+};
+
+&uart7 { /* conflict with lcdif */
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_uart7>;
+    status = "okay";
+};
+
+&ecspi1 { /* conflict with lcdif */
+    cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_ecspi1>;
+    status = "okay";
+
+    spidev@0 {
+        compatible = "semtech,sx1301";
+        reg = <0>;
+        spi-max-frequency = <2000000>;
+    };
+};
+
+&pwm7 {
+    #pwm-cells = <2>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_pwm7>;
+    status = "okay";
+};
+
+&pwm8 {
+    #pwm-cells = <2>;
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_pwm8>;
+    status = "okay";
+};
+
+&can1 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_flexcan1>;
+    xceiver-supply = <&reg_can_3v3>;
+    status = "okay";
+};
+
+/* CAN2 is multiplexed with UART2 RTS/CTS */
+&can2 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_flexcan2>;
+    xceiver-supply = <&reg_can_3v3>;
+    status = "okay";
+};
+/* 40Pin Header end */
+
+&snvs_poweroff {
+    status = "okay";
@@ -245,6 +195,16 @@
+&uart1 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_uart1>;
+    status = "okay";
+};
+
+&uart2 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_uart2>;
+    uart-has-rtscts;
+    /* for DTE mode, add below change */
+    /* fsl,dte-mode; */
+    /* pinctrl-0 = <&pinctrl_uart2dte>; */
+    status = "okay";
+};
+
@@ -417,6 +377,40 @@
+};
+*/
+
+&sai1 {
+    assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>,
+              <&clks IMX6UL_CLK_SAI1>;
+    assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+    assigned-clock-rates = <0>, <24576000>;
+    fsl,sai-mclk-direction-output;
+    status = "okay";
+};
+
+&sim2 {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_sim2>;
+    assigned-clocks = <&clks IMX6UL_CLK_SIM_SEL>;
+    assigned-clock-parents = <&clks IMX6UL_CLK_SIM_PODF>;
+    assigned-clock-rates = <240000000>;
+    /* GPIO_ACTIVE_HIGH/LOW:sim card voltage control
+     * NCN8025:Vcc = ACTIVE_HIGH?5V:3V
+     * TDA8035:Vcc = ACTIVE_HIGH?5V:1.8V
+     */
+    pinctrl-assert-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+    port = <1>;
+    sven_low_active;
+    status = "disabled";
+};
+
+&tsc {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_tsc>;
+    xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+    measure-delay-time = <0xffff>;
+    pre-charge-time = <0xfff>;
+    status = "okay";
+};
+
+&usbotg1 {
+    dr_mode = "otg";
+    pinctrl-names = "default";
@@ -465,97 +459,6 @@
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_wdog>;
+    fsl,ext-reset-output;
+};
+
+/* 40Pin Header pinctrl */
+&iomuxc {
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_extgpio>;
+
+    igkboard_extpin {
+        pinctrl_extgpio: extgpiogrp{
+            fsl,pins = <
+                MX6UL_PAD_UART1_CTS_B__GPIO1_IO18   0x17059 /*  7#  GPIO    */
+                MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01  0x17059 /* 35#  GPIO    */
+                MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08  0x17059 /* 37#  GPIO    */
+                MX6UL_PAD_LCD_DATA18__GPIO3_IO23    0x17059 /* 22# GPIO     */
+                MX6UL_PAD_LCD_DATA19__GPIO3_IO24    0x17059 /* 26# GPIO     */
+                MX6UL_PAD_JTAG_TMS__GPIO1_IO11      0x17059 /* 36# GPIO */
+                MX6UL_PAD_JTAG_MOD__GPIO1_IO10      0x17059 /* 38# GPIO */
+                MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x17059 /* 40# GPIO */
+            >;
+        };
+
+        pinctrl_i2c1: i2c1grp {
+            fsl,pins = <
+                MX6UL_PAD_GPIO1_IO03__I2C1_SDA        0x4001b8b0
+                MX6UL_PAD_GPIO1_IO02__I2C1_SCL        0x4001b8b0
+            >;
+        };
+
+        pinctrl_uart2: uart2grp {
+            fsl,pins = <
+                MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX    0x1b0b1
+                MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX    0x1b0b1
+            >;
+        };
+
+        pinctrl_uart3: uart3grp {
+            fsl,pins = <
+                MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX    0x1b0b1
+                MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX    0x1b0b1
+            >;
+        };
+
+        pinctrl_uart4: uart4grp {
+            fsl,pins = <
+                MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX    0x1b0b1
+                MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX    0x1b0b1
+            >;
+        };
+
+        pinctrl_uart7: uart7grp {
+            fsl,pins = <
+                MX6UL_PAD_LCD_DATA16__UART7_DCE_TX        0x1b0b1
+                MX6UL_PAD_LCD_DATA17__UART7_DCE_RX        0x1b0b1
+            >;
+        };
+
+        pinctrl_ecspi1: ecspi1-grp {
+            fsl,pins = <
+                MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK   0x10b0
+                MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI   0x10b0
+                MX6UL_PAD_LCD_DATA23__ECSPI1_MISO   0x10b0
+                MX6UL_PAD_LCD_DATA21__GPIO3_IO26    0x10b0
+            >;
+        };
+
+        pinctrl_pwm7: pwm7grp {
+            fsl,pins = <
+                MX6UL_PAD_JTAG_TCK__PWM7_OUT        0x110b0
+            >;
+        };
+
+        pinctrl_pwm8: pwm8grp {
+            fsl,pins = <
+                MX6UL_PAD_JTAG_TRST_B__PWM8_OUT        0x110b0
+            >;
+        };
+
+        pinctrl_flexcan1: flexcan1grp{
+            fsl,pins = <
+                MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX    0x1b020
+                MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX    0x1b020
+            >;
+        };
+
+        pinctrl_flexcan2: flexcan2grp{
+            fsl,pins = <
+                MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX    0x1b020
+                MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX    0x1b020
+            >;
+        };
+    };
+};
+
+&iomuxc {
@@ -634,6 +537,27 @@
+        >;
+    };
+
+    pinctrl_flexcan1: flexcan1grp{
+        fsl,pins = <
+            MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX    0x1b020
+            MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX    0x1b020
+        >;
+    };
+
+    pinctrl_flexcan2: flexcan2grp{
+        fsl,pins = <
+            MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX    0x1b020
+            MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX    0x1b020
+        >;
+    };
+
+    pinctrl_i2c1: i2c1grp {
+        fsl,pins = <
+            MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+            MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+        >;
+    };
+
+    pinctrl_i2c2: i2c2grp {
+        fsl,pins = <
+            MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
@@ -681,6 +605,16 @@
+        >;
+    };
+
+    pinctrl_sai2: sai2grp {
+        fsl,pins = <
+            MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK    0x17088
+            MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC    0x17088
+            MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
+            MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA    0x11088
+            MX6UL_PAD_JTAG_TMS__SAI2_MCLK        0x17088
+        >;
+    };
+
+    pinctrl_pwm1: pwm1grp {
+        fsl,pins = <
+            MX6UL_PAD_GPIO1_IO08__PWM1_OUT     0x110b0
@@ -693,10 +627,56 @@
+        >;
+    };
+
+    pinctrl_sim2: sim2grp {
+        fsl,pins = <
+            MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD        0xb808
+            MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK        0x31
+            MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B        0xb808
+            MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN        0xb808
+            MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD        0xb809
+            MX6UL_PAD_CSI_DATA02__GPIO4_IO23        0x3008
+        >;
+    };
+
+    pinctrl_spi4: spi4grp {
+        fsl,pins = <
+            MX6UL_PAD_BOOT_MODE0__GPIO5_IO10    0x70a1
+            MX6UL_PAD_BOOT_MODE1__GPIO5_IO11    0x70a1
+            MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08    0x80000000
+        >;
+    };
+
+    pinctrl_tsc: tscgrp {
+        fsl,pins = <
+            MX6UL_PAD_GPIO1_IO01__GPIO1_IO01        0xb0
+            MX6UL_PAD_GPIO1_IO02__GPIO1_IO02        0xb0
+            MX6UL_PAD_GPIO1_IO03__GPIO1_IO03        0xb0
+            MX6UL_PAD_GPIO1_IO04__GPIO1_IO04        0xb0
+        >;
+    };
+
+    pinctrl_uart1: uart1grp {
+        fsl,pins = <
+            MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+            MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+        >;
+    };
+
+    pinctrl_uart2: uart2grp {
+        fsl,pins = <
+            MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX    0x1b0b1
+            MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX    0x1b0b1
+            MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS    0x1b0b1
+            MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS    0x1b0b1
+        >;
+    };
+
+    pinctrl_uart2dte: uart2dtegrp {
+        fsl,pins = <
+            MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX    0x1b0b1
+            MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX    0x1b0b1
+            MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS    0x1b0b1
+            MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS    0x1b0b1
+        >;
+    };
+
@@ -726,6 +706,7 @@
+            MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+            MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+            MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+
+        >;
+    };
+
@@ -805,7 +786,7 @@
+
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/boot/dts/Makefile linux-imx-igkboard/arch/arm/boot/dts/Makefile
--- linux-imx/arch/arm/boot/dts/Makefile    2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-igkboard/arch/arm/boot/dts/Makefile    2022-04-13 23:15:49.155016887 +0800
+++ linux-imx-igkboard/arch/arm/boot/dts/Makefile    2022-03-27 22:09:19.799996369 +0800
@@ -678,6 +678,7 @@
     imx6ul-tx6ul-0010.dtb \
     imx6ul-tx6ul-0011.dtb \
@@ -816,7 +797,7 @@
     imx6ull-14x14-evk-btwifi.dtb \
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/arch/arm/configs/igkboard_defconfig linux-imx-igkboard/arch/arm/configs/igkboard_defconfig
--- linux-imx/arch/arm/configs/igkboard_defconfig    1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-igkboard/arch/arm/configs/igkboard_defconfig    2022-04-14 20:08:27.465008910 +0800
+++ linux-imx-igkboard/arch/arm/configs/igkboard_defconfig    2022-03-27 22:20:23.534446767 +0800
@@ -0,0 +1,722 @@
+CONFIG_KERNEL_LZO=y
+CONFIG_SYSVIPC=y
@@ -1540,35 +1521,9 @@
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/do.sh linux-imx-igkboard/do.sh
--- linux-imx/do.sh    1970-01-01 08:00:00.000000000 +0800
+++ linux-imx-igkboard/do.sh    2022-04-14 19:56:04.963080600 +0800
@@ -0,0 +1,22 @@
+#!/bin/bash
+
+INST_PATH=/srv/ftp/pub/
+
+JOBS=`cat /proc/cpuinfo | grep processor | wc -l`
+
+function do_build()
+{
+    make igkboard_defconfig
+    make -j ${JOBS}
+}
+
+function do_install()
+{
+    set -x
+    cp arch/arm/boot/zImage $INST_PATH
+    cp arch/arm/boot/dts/igkboard.dtb $INST_PATH
+}
+
+do_build
+
+#do_install
diff -Nuar -x include-prefixes -x logo_linux_clut224.ppm linux-imx/Makefile linux-imx-igkboard/Makefile
--- linux-imx/Makefile    2021-09-08 18:41:11.000000000 +0800
+++ linux-imx-igkboard/Makefile    2022-04-14 20:05:02.060376092 +0800
+++ linux-imx-igkboard/Makefile    2022-03-27 22:09:19.803996342 +0800
@@ -367,7 +367,8 @@
 # Alternatively CROSS_COMPILE can be set in the environment.
 # Default value for CROSS_COMPILE is not to prefix executables