From 83cf83d37790889e5bb3ebb365e8e536814a6256 Mon Sep 17 00:00:00 2001
From: Wenxue <wenxue.guo@avnet.com>
Date: Tue, 02 Sep 2025 09:42:34 +0800
Subject: [PATCH] 定时器和蜂鸣器程序
---
Core/Src/board/miscdev.c | 49
Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c | 2820 ++++++++
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h | 2394 +++++++
ISKBoard.ioc | 33
Core/Src/board/miscdev.h | 12
Core/Src/tim.c | 221
Core/Src/main.c | 16
Core/Inc/main.h | 2
Core/Inc/stm32l4xx_hal_conf.h | 2
Core/Inc/tim.h | 57
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_tim.h | 5104 ++++++++++++++++
Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h | 439 +
Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c | 7902 ++++++++++++++++++++++++
13 files changed, 19,036 insertions(+), 15 deletions(-)
diff --git a/Core/Inc/main.h b/Core/Inc/main.h
index b91e590..f26f935 100644
--- a/Core/Inc/main.h
+++ b/Core/Inc/main.h
@@ -70,6 +70,8 @@
#define Key3_Pin GPIO_PIN_14
#define Key3_GPIO_Port GPIOB
#define Key3_EXTI_IRQn EXTI15_10_IRQn
+#define Buzzer_Pin GPIO_PIN_11
+#define Buzzer_GPIO_Port GPIOA
/* USER CODE BEGIN Private defines */
diff --git a/Core/Inc/stm32l4xx_hal_conf.h b/Core/Inc/stm32l4xx_hal_conf.h
index fe2bb62..a8c2870 100644
--- a/Core/Inc/stm32l4xx_hal_conf.h
+++ b/Core/Inc/stm32l4xx_hal_conf.h
@@ -77,7 +77,7 @@
/*#define HAL_SPI_MODULE_ENABLED */
/*#define HAL_SRAM_MODULE_ENABLED */
/*#define HAL_SWPMI_MODULE_ENABLED */
-/*#define HAL_TIM_MODULE_ENABLED */
+#define HAL_TIM_MODULE_ENABLED
/*#define HAL_TSC_MODULE_ENABLED */
#define HAL_UART_MODULE_ENABLED
/*#define HAL_USART_MODULE_ENABLED */
diff --git a/Core/Inc/tim.h b/Core/Inc/tim.h
new file mode 100644
index 0000000..6b5095c
--- /dev/null
+++ b/Core/Inc/tim.h
@@ -0,0 +1,57 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file tim.h
+ * @brief This file contains all the function prototypes for
+ * the tim.c file
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2025 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __TIM_H__
+#define __TIM_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern TIM_HandleTypeDef htim1;
+
+extern TIM_HandleTypeDef htim6;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_TIM1_Init(void);
+void MX_TIM6_Init(void);
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __TIM_H__ */
+
diff --git a/Core/Src/board/miscdev.c b/Core/Src/board/miscdev.c
index bcb51f8..f5f96c5 100644
--- a/Core/Src/board/miscdev.c
+++ b/Core/Src/board/miscdev.c
@@ -215,3 +215,52 @@
return 0;
}
+
+/*
+ *+----------------------------+
+ *| Timer Buzzer/delay API |
+ *+----------------------------+
+ */
+#include "tim.h"
+
+/* Max to 60000 us */
+void udelay(uint16_t us)
+{
+ uint16_t differ = 60000-us;
+
+ HAL_TIM_Base_Start(&htim6);
+
+ __HAL_TIM_SET_COUNTER(&htim6, differ);
+
+ while( differ < 60000 )
+ {
+ differ=__HAL_TIM_GET_COUNTER(&htim6);
+ }
+
+ HAL_TIM_Base_Stop(&htim6);
+}
+
+
+void beep_start(uint16_t times, uint16_t interval)
+{
+ while( times-- )
+ {
+ /* Start buzzer */
+ if (HAL_TIM_PWM_Start(&htim1, TIM_CHANNEL_4) != HAL_OK)
+ {
+ /* Starting Error */
+ Error_Handler();
+ }
+
+ HAL_Delay(interval);
+
+ /* Stop buzzer */
+ if (HAL_TIM_PWM_Stop(&htim1, TIM_CHANNEL_4) != HAL_OK)
+ {
+ /* Starting Error */
+ Error_Handler();
+ }
+
+ HAL_Delay(interval);
+ }
+}
diff --git a/Core/Src/board/miscdev.h b/Core/Src/board/miscdev.h
index 676d6a0..82a45ca 100644
--- a/Core/Src/board/miscdev.h
+++ b/Core/Src/board/miscdev.h
@@ -99,4 +99,16 @@
extern int adc_sample_lux_noisy(uint32_t *lux, uint32_t *noisy);
+/*
+ *+----------------------------+
+ *| Timer Buzzer/delay API |
+ *+----------------------------+
+ */
+
+/* Max to 60000 us */
+extern void udelay(uint16_t us);
+
+/* Turn buzzer on for $times */
+extern void beep_start(uint16_t times, uint16_t interval);
+
#endif /* __MISCDEV_H */
diff --git a/Core/Src/main.c b/Core/Src/main.c
index e049e2f..970851f 100644
--- a/Core/Src/main.c
+++ b/Core/Src/main.c
@@ -19,6 +19,7 @@
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "adc.h"
+#include "tim.h"
#include "usart.h"
#include "gpio.h"
@@ -67,7 +68,7 @@
{
/* USER CODE BEGIN 1 */
- uint32_t lux, noisy;
+
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
@@ -90,24 +91,23 @@
MX_GPIO_Init();
MX_USART1_UART_Init();
MX_ADC1_Init();
+ MX_TIM6_Init();
+ MX_TIM1_Init();
/* USER CODE BEGIN 2 */
init_relay();
init_led();
- /* Turn on relay after 1 second */
- HAL_Delay(1000);
- turn_relay(Relay1, ON);
+ beep_start(2, 300);
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
- adc_sample_lux_noisy(&lux, &noisy);
- printf("Lux:%lu Noisy:%lu\r\n", lux, noisy);
-
- HAL_Delay(5000);
+ toggle_led(Led_B);
+ for(int i=0; i<1000; i++)
+ udelay(3000);
/* USER CODE END WHILE */
diff --git a/Core/Src/tim.c b/Core/Src/tim.c
new file mode 100644
index 0000000..20aca0e
--- /dev/null
+++ b/Core/Src/tim.c
@@ -0,0 +1,221 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file tim.c
+ * @brief This file provides code for the configuration
+ * of the TIM instances.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2025 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "tim.h"
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+TIM_HandleTypeDef htim1;
+TIM_HandleTypeDef htim6;
+
+/* TIM1 init function */
+void MX_TIM1_Init(void)
+{
+
+ /* USER CODE BEGIN TIM1_Init 0 */
+
+ /* USER CODE END TIM1_Init 0 */
+
+ TIM_MasterConfigTypeDef sMasterConfig = {0};
+ TIM_OC_InitTypeDef sConfigOC = {0};
+ TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
+
+ /* USER CODE BEGIN TIM1_Init 1 */
+
+ /* USER CODE END TIM1_Init 1 */
+ htim1.Instance = TIM1;
+ htim1.Init.Prescaler = 80-1;
+ htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
+ htim1.Init.Period = 370-1;
+ htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+ htim1.Init.RepetitionCounter = 0;
+ htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+ if (HAL_TIM_PWM_Init(&htim1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+ sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET;
+ sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+ if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sConfigOC.OCMode = TIM_OCMODE_PWM1;
+ sConfigOC.Pulse = 185;
+ sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+ sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+ sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
+ sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+ if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
+ sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
+ sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
+ sBreakDeadTimeConfig.DeadTime = 0;
+ sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
+ sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
+ sBreakDeadTimeConfig.BreakFilter = 0;
+ sBreakDeadTimeConfig.Break2State = TIM_BREAK2_DISABLE;
+ sBreakDeadTimeConfig.Break2Polarity = TIM_BREAK2POLARITY_HIGH;
+ sBreakDeadTimeConfig.Break2Filter = 0;
+ sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
+ if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN TIM1_Init 2 */
+
+ /* USER CODE END TIM1_Init 2 */
+ HAL_TIM_MspPostInit(&htim1);
+
+}
+/* TIM6 init function */
+void MX_TIM6_Init(void)
+{
+
+ /* USER CODE BEGIN TIM6_Init 0 */
+
+ /* USER CODE END TIM6_Init 0 */
+
+ TIM_MasterConfigTypeDef sMasterConfig = {0};
+
+ /* USER CODE BEGIN TIM6_Init 1 */
+
+ /* USER CODE END TIM6_Init 1 */
+ htim6.Instance = TIM6;
+ htim6.Init.Prescaler = 80-1;
+ htim6.Init.CounterMode = TIM_COUNTERMODE_UP;
+ htim6.Init.Period = 1;
+ htim6.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+ if (HAL_TIM_Base_Init(&htim6) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+ sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+ if (HAL_TIMEx_MasterConfigSynchronization(&htim6, &sMasterConfig) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN TIM6_Init 2 */
+
+ /* USER CODE END TIM6_Init 2 */
+
+}
+
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* tim_pwmHandle)
+{
+
+ if(tim_pwmHandle->Instance==TIM1)
+ {
+ /* USER CODE BEGIN TIM1_MspInit 0 */
+
+ /* USER CODE END TIM1_MspInit 0 */
+ /* TIM1 clock enable */
+ __HAL_RCC_TIM1_CLK_ENABLE();
+ /* USER CODE BEGIN TIM1_MspInit 1 */
+
+ /* USER CODE END TIM1_MspInit 1 */
+ }
+}
+
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
+{
+
+ if(tim_baseHandle->Instance==TIM6)
+ {
+ /* USER CODE BEGIN TIM6_MspInit 0 */
+
+ /* USER CODE END TIM6_MspInit 0 */
+ /* TIM6 clock enable */
+ __HAL_RCC_TIM6_CLK_ENABLE();
+ /* USER CODE BEGIN TIM6_MspInit 1 */
+
+ /* USER CODE END TIM6_MspInit 1 */
+ }
+}
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
+{
+
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(timHandle->Instance==TIM1)
+ {
+ /* USER CODE BEGIN TIM1_MspPostInit 0 */
+
+ /* USER CODE END TIM1_MspPostInit 0 */
+
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ /**TIM1 GPIO Configuration
+ PA11 ------> TIM1_CH4
+ */
+ GPIO_InitStruct.Pin = Buzzer_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_PULLDOWN;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF1_TIM1;
+ HAL_GPIO_Init(Buzzer_GPIO_Port, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN TIM1_MspPostInit 1 */
+
+ /* USER CODE END TIM1_MspPostInit 1 */
+ }
+
+}
+
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* tim_pwmHandle)
+{
+
+ if(tim_pwmHandle->Instance==TIM1)
+ {
+ /* USER CODE BEGIN TIM1_MspDeInit 0 */
+
+ /* USER CODE END TIM1_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_TIM1_CLK_DISABLE();
+ /* USER CODE BEGIN TIM1_MspDeInit 1 */
+
+ /* USER CODE END TIM1_MspDeInit 1 */
+ }
+}
+
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
+{
+
+ if(tim_baseHandle->Instance==TIM6)
+ {
+ /* USER CODE BEGIN TIM6_MspDeInit 0 */
+
+ /* USER CODE END TIM6_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_TIM6_CLK_DISABLE();
+ /* USER CODE BEGIN TIM6_MspDeInit 1 */
+
+ /* USER CODE END TIM6_MspDeInit 1 */
+ }
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h
new file mode 100644
index 0000000..571d931
--- /dev/null
+++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim.h
@@ -0,0 +1,2394 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_tim.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32L4xx_HAL_TIM_H
+#define STM32L4xx_HAL_TIM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ GP timers: this parameter must be a number between Min_Data = 0x00 and
+ Max_Data = 0xFF.
+ Advanced timers: this parameter must be a number between Min_Data = 0x0000 and
+ Max_Data = 0xFFFF. */
+
+ uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload.
+ This parameter can be a value of @ref TIM_AutoReloadPreload */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for timer instances supporting break feature. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for timer instances supporting break feature. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for timer instances supporting break feature. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for timer instances supporting break feature. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for timer instances supporting break feature. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for timer instances supporting break feature. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Input_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Input_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_ClockConfigTypeDef;
+
+/**
+ * @brief TIM Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources
+ This parameter can be a value of @ref TIM_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
+ This parameter must be 0: When OCRef clear feature is used with ETR source,
+ ETR prescaler must be off */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note Advanced timers provide TRGO2 internal line which is redirected
+ * to the ADC
+ */
+typedef struct
+{
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection_2 */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode
+ @note When the Master/slave mode is enabled, the effect of
+ an event on the trigger input (TRGI) is delayed to allow a
+ perfect synchronization between the current timer and its
+ slaves (through TRGO). It is not mandatory in case of timer
+ synchronization mode. */
+} TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIM_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+} TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief TIM Break input(s) and Dead time configuration Structure definition
+ * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
+ * filter and polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+
+ uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */
+
+ uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+
+ uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+
+ uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */
+
+ uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t Break2State; /*!< TIM Break2 State, This parameter can be a value of @ref TIM_Break2_Input_enable_disable */
+
+ uint32_t Break2Polarity; /*!< TIM Break2 input polarity, This parameter can be a value of @ref TIM_Break2_Polarity */
+
+ uint32_t Break2Filter; /*!< TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */
+} HAL_TIM_StateTypeDef;
+
+/**
+ * @brief TIM Channel States definition
+ */
+typedef enum
+{
+ HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */
+ HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */
+ HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */
+} HAL_TIM_ChannelStateTypeDef;
+
+/**
+ * @brief DMA Burst States definition
+ */
+typedef enum
+{
+ HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */
+ HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */
+ HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */
+} HAL_TIM_DMABurstStateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_5 = 0x10U, /*!< The active channel is 5 */
+ HAL_TIM_ACTIVE_CHANNEL_6 = 0x20U, /*!< The active channel is 6 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */
+} HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+typedef struct __TIM_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+ __IO HAL_TIM_ChannelStateTypeDef ChannelState[6]; /*!< TIM channel operation state */
+ __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */
+ __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */
+ void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */
+ void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */
+ void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */
+ void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */
+ void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */
+ void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */
+ void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */
+ void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */
+ void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */
+ void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */
+ void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */
+ void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */
+ void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */
+ void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */
+ void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */
+ void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */
+ void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */
+ void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */
+ void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */
+ void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */
+ void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */
+ void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */
+ void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */
+ void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */
+ void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */
+ void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */
+ void (* Break2Callback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break2 Callback */
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+} TIM_HandleTypeDef;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL TIM Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */
+ , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */
+ , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */
+ , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */
+ , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */
+ , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */
+ , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */
+ , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */
+ , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */
+ , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */
+ , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */
+ , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */
+ , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */
+ , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */
+ , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */
+ , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */
+ , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */
+ , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */
+ , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */
+ , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */
+ , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */
+ , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */
+ , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */
+ , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */
+ , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */
+ , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */
+ , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */
+ , HAL_TIM_BREAK2_CB_ID = 0x1BU /*!< TIM Break2 Callback ID */
+} HAL_TIM_CallbackIDTypeDef;
+
+/**
+ * @brief HAL TIM Callback pointer definition
+ */
+typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */
+
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_ClearInput_Source TIM Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */
+#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */
+#define TIM_CLEARINPUTSOURCE_OCREFCLR 0x00000002U /*!< OCREF_CLR is connected to OCREF_CLR_INT */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM DMA Base Address
+ * @{
+ */
+#define TIM_DMABASE_CR1 0x00000000U
+#define TIM_DMABASE_CR2 0x00000001U
+#define TIM_DMABASE_SMCR 0x00000002U
+#define TIM_DMABASE_DIER 0x00000003U
+#define TIM_DMABASE_SR 0x00000004U
+#define TIM_DMABASE_EGR 0x00000005U
+#define TIM_DMABASE_CCMR1 0x00000006U
+#define TIM_DMABASE_CCMR2 0x00000007U
+#define TIM_DMABASE_CCER 0x00000008U
+#define TIM_DMABASE_CNT 0x00000009U
+#define TIM_DMABASE_PSC 0x0000000AU
+#define TIM_DMABASE_ARR 0x0000000BU
+#define TIM_DMABASE_RCR 0x0000000CU
+#define TIM_DMABASE_CCR1 0x0000000DU
+#define TIM_DMABASE_CCR2 0x0000000EU
+#define TIM_DMABASE_CCR3 0x0000000FU
+#define TIM_DMABASE_CCR4 0x00000010U
+#define TIM_DMABASE_BDTR 0x00000011U
+#define TIM_DMABASE_DCR 0x00000012U
+#define TIM_DMABASE_DMAR 0x00000013U
+#define TIM_DMABASE_OR1 0x00000014U
+#define TIM_DMABASE_CCMR3 0x00000015U
+#define TIM_DMABASE_CCR5 0x00000016U
+#define TIM_DMABASE_CCR6 0x00000017U
+#define TIM_DMABASE_OR2 0x00000018U
+#define TIM_DMABASE_OR3 0x00000019U
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */
+#define TIM_EVENTSOURCE_BREAK2 TIM_EGR_B2G /*!< A break 2 event is generated */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap
+ * @{
+ */
+#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */
+#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */
+#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */
+#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State TIM Output Compare State
+ * @{
+ */
+#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */
+#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload
+ * @{
+ */
+#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */
+#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */
+#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
+ * @{
+ */
+#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */
+#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */
+#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */
+#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */
+#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */
+#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity
+ * @{
+ */
+#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */
+#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */
+#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */
+#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition TIM interrupt Definition
+ * @{
+ */
+#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */
+#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */
+#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */
+#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */
+#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */
+#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */
+#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */
+#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Commutation_Source TIM Commutation Source
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */
+#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources TIM DMA Sources
+ * @{
+ */
+#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */
+#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */
+#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */
+#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */
+#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */
+#define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */
+#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_CC_DMA_Request CCx DMA request selection
+ * @{
+ */
+#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */
+#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag Definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */
+#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */
+#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */
+#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */
+#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */
+#define TIM_FLAG_CC5 TIM_SR_CC5IF /*!< Capture/Compare 5 interrupt flag */
+#define TIM_FLAG_CC6 TIM_SR_CC6IF /*!< Capture/Compare 6 interrupt flag */
+#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */
+#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */
+#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */
+#define TIM_FLAG_BREAK2 TIM_SR_B2IF /*!< Break 2 interrupt flag */
+#define TIM_FLAG_SYSTEM_BREAK TIM_SR_SBIF /*!< System Break interrupt flag */
+#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */
+#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */
+#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */
+#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel TIM Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */
+#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */
+#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */
+#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */
+#define TIM_CHANNEL_5 0x00000010U /*!< Compare channel 5 identifier */
+#define TIM_CHANNEL_6 0x00000014U /*!< Compare channel 6 identifier */
+#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */
+#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */
+#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */
+#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */
+#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */
+#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */
+#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */
+#define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */
+#define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */
+#define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
+ * @{
+ */
+#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */
+#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
+ * @{
+ */
+#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */
+#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */
+/**
+ * @}
+ */
+/** @defgroup TIM_Lock_level TIM Lock level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */
+#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */
+#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */
+#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable
+ * @{
+ */
+#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */
+#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Polarity TIM Break Input Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */
+#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break2_Input_enable_disable TIM Break input 2 Enable
+ * @{
+ */
+#define TIM_BREAK2_DISABLE 0x00000000U /*!< Break input BRK2 is disabled */
+#define TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break input BRK2 is enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break2_Polarity TIM Break Input 2 Polarity
+ * @{
+ */
+#define TIM_BREAK2POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */
+#define TIM_BREAK2POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */
+#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Group_Channel5 TIM Group Channel 5 and Channel 1, 2 or 3
+ * @{
+ */
+#define TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */
+#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */
+#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */
+#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */
+#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */
+#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */
+#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */
+#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection_2 TIM Master Mode Selection 2 (TRGO2)
+ * @{
+ */
+#define TIM_TRGO2_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO2) */
+#define TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO2) */
+#define TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output (TRGO2) */
+#define TIM_TRGO2_OC1 (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO2) */
+#define TIM_TRGO2_OC1REF TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output (TRGO2) */
+#define TIM_TRGO2_OC2REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output (TRGO2) */
+#define TIM_TRGO2_OC3REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output (TRGO2) */
+#define TIM_TRGO2_OC4REF (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output (TRGO2) */
+#define TIM_TRGO2_OC5REF TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output (TRGO2) */
+#define TIM_TRGO2_OC6REF (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output (TRGO2) */
+#define TIM_TRGO2_OC4REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges generate pulses on TRGO2 */
+#define TIM_TRGO2_OC6REF_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges generate pulses on TRGO2 */
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges generate pulses on TRGO2 */
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges generate pulses on TRGO2 */
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF or OC6REF rising edges generate pulses on TRGO2 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode
+ * @{
+ */
+#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */
+#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode TIM Slave mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */
+#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */
+#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */
+#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */
+#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */
+#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */
+#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */
+#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */
+#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */
+#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */
+#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */
+#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */
+#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */
+#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */
+#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */
+#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */
+#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */
+#define TIM_OCMODE_ASYMMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */
+#define TIM_OCMODE_ASYMMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */
+#define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */
+#define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */
+#define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */
+#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */
+#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */
+#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */
+#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */
+#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */
+#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index TIM DMA Handle Index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State TIM Capture/Compare Channel State
+ * @{
+ */
+#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */
+#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */
+#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */
+#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_System TIM Break System
+ * @{
+ */
+#define TIM_BREAK_SYSTEM_ECC SYSCFG_CFGR2_ECCL /*!< Enables and locks the ECC error signal with Break Input of TIM1/8/15/16/17 */
+#define TIM_BREAK_SYSTEM_PVD SYSCFG_CFGR2_PVDL /*!< Enables and locks the PVD connection with TIM1/8/15/16/17 Break Input and also the PVDE and PLS bits of the Power Control Interface */
+#define TIM_BREAK_SYSTEM_SRAM2_PARITY_ERROR SYSCFG_CFGR2_SPL /*!< Enables and locks the SRAM2_PARITY error signal with Break Input of TIM1/8/15/16/17 */
+#define TIM_BREAK_SYSTEM_LOCKUP SYSCFG_CFGR2_CLL /*!< Enables and locks the LOCKUP output of CortexM4 with Break Input of TIM1/8/15/16/17 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset TIM handle state.
+ * @param __HANDLE__ TIM handle.
+ * @retval None
+ */
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \
+ (__HANDLE__)->State = HAL_TIM_STATE_RESET; \
+ (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \
+ (__HANDLE__)->Base_MspInitCallback = NULL; \
+ (__HANDLE__)->Base_MspDeInitCallback = NULL; \
+ (__HANDLE__)->IC_MspInitCallback = NULL; \
+ (__HANDLE__)->IC_MspDeInitCallback = NULL; \
+ (__HANDLE__)->OC_MspInitCallback = NULL; \
+ (__HANDLE__)->OC_MspDeInitCallback = NULL; \
+ (__HANDLE__)->PWM_MspInitCallback = NULL; \
+ (__HANDLE__)->PWM_MspDeInitCallback = NULL; \
+ (__HANDLE__)->OnePulse_MspInitCallback = NULL; \
+ (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \
+ (__HANDLE__)->Encoder_MspInitCallback = NULL; \
+ (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \
+ (__HANDLE__)->HallSensor_MspInitCallback = NULL; \
+ (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \
+ (__HANDLE__)->State = HAL_TIM_STATE_RESET; \
+ (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelState[4] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelState[5] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \
+ (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \
+ } while(0)
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been
+ * disabled
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__ TIM handle
+ * @retval None
+ * @note The Main Output Enable of a timer instance is disabled unconditionally
+ */
+#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE)
+
+/** @brief Enable the specified TIM interrupt.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __INTERRUPT__ specifies the TIM interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+
+/** @brief Disable the specified TIM interrupt.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __INTERRUPT__ specifies the TIM interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+
+/** @brief Enable the specified DMA request.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __DMA__ specifies the TIM DMA request to enable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+
+/** @brief Disable the specified DMA request.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __DMA__ specifies the TIM DMA request to disable.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: Update DMA request
+ * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
+ * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
+ * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
+ * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
+ * @arg TIM_DMA_COM: Commutation DMA request
+ * @arg TIM_DMA_TRIGGER: Trigger DMA request
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+
+/** @brief Check whether the specified TIM interrupt flag is set or not.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __FLAG__ specifies the TIM interrupt flag to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_CC5: Compare 5 interrupt flag
+ * @arg TIM_FLAG_CC6: Compare 6 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag
+ * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the specified TIM interrupt flag.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __FLAG__ specifies the TIM interrupt flag to clear.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_UPDATE: Update interrupt flag
+ * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
+ * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
+ * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
+ * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
+ * @arg TIM_FLAG_CC5: Compare 5 interrupt flag
+ * @arg TIM_FLAG_CC6: Compare 6 interrupt flag
+ * @arg TIM_FLAG_COM: Commutation interrupt flag
+ * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
+ * @arg TIM_FLAG_BREAK: Break interrupt flag
+ * @arg TIM_FLAG_BREAK2: Break 2 interrupt flag
+ * @arg TIM_FLAG_SYSTEM_BREAK: System Break interrupt flag
+ * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
+ * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
+ * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
+ * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/**
+ * @brief Check whether the specified TIM interrupt source is enabled or not.
+ * @param __HANDLE__ TIM handle
+ * @param __INTERRUPT__ specifies the TIM interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval The state of TIM_IT (SET or RESET).
+ */
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \
+ == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Clear the TIM interrupt pending bits.
+ * @param __HANDLE__ TIM handle
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_UPDATE: Update interrupt
+ * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
+ * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
+ * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
+ * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
+ * @arg TIM_IT_COM: Commutation interrupt
+ * @arg TIM_IT_TRIGGER: Trigger interrupt
+ * @arg TIM_IT_BREAK: Break interrupt
+ * @retval None
+ */
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+/**
+ * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31).
+ * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read
+ * in an atomic way.
+ * @param __HANDLE__ TIM handle.
+ * @retval None
+mode.
+ */
+#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP))
+
+/**
+ * @brief Disable update interrupt flag (UIF) remapping.
+ * @param __HANDLE__ TIM handle.
+ * @retval None
+mode.
+ */
+#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP))
+
+/**
+ * @brief Get update interrupt flag (UIF) copy status.
+ * @param __COUNTER__ Counter value.
+ * @retval The state of UIFCPY (TRUE or FALSE).
+mode.
+ */
+#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY))
+
+/**
+ * @brief Indicates whether or not the TIM Counter is used as downcounter.
+ * @param __HANDLE__ TIM handle.
+ * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
+ * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode
+ * or Encoder mode.
+ */
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+
+/**
+ * @brief Set the TIM Prescaler on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __PRESC__ specifies the Prescaler new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+/**
+ * @brief Set the TIM Counter Register value on runtime.
+ * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in
+ * case of 32 bits counter TIM instance.
+ * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros.
+ * @param __HANDLE__ TIM handle.
+ * @param __COUNTER__ specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Get the TIM Counter Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT)
+ */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __AUTORELOAD__ specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+
+/**
+ * @brief Get the TIM Autoreload Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR)
+ */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Set the TIM Clock Division value on runtime without calling another time any Init function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CKD__ specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+ * @retval None
+ */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+
+/**
+ * @brief Get the TIM Clock Division value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @retval The clock division can be one of the following values:
+ * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
+ * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
+ */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel()
+ * function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__ specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Get the TIM Input Capture prescaler on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval The input capture prescaler can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U)
+
+/**
+ * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @param __COMPARE__ specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR6 = (__COMPARE__)))
+
+/**
+ * @brief Get the TIM Capture Compare Register value on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @arg TIM_CHANNEL_5: get capture/compare 5 register value
+ * @arg TIM_CHANNEL_6: get capture/compare 6 register value
+ * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy)
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
+ ((__HANDLE__)->Instance->CCR6))
+
+/**
+ * @brief Set the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5PE) :\
+ ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6PE))
+
+/**
+ * @brief Reset the TIM Output compare preload.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5PE) :\
+ ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6PE))
+
+/**
+ * @brief Enable fast mode for a given channel.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @note When fast mode is enabled an active edge on the trigger input acts
+ * like a compare match on CCx output. Delay to sample the trigger
+ * input and to activate CCx output is reduced to 3 clock cycles.
+ * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode.
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC5FE) :\
+ ((__HANDLE__)->Instance->CCMR3 |= TIM_CCMR3_OC6FE))
+
+/**
+ * @brief Disable fast mode for a given channel.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @note When fast mode is disabled CCx output behaves normally depending
+ * on counter and CCRx values even when the trigger is ON. The minimum
+ * delay to activate CCx output when an active edge occurs on the
+ * trigger input is 5 clock cycles.
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE) :\
+ ((__HANDLE__)->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE))
+
+/**
+ * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register.
+ * @param __HANDLE__ TIM handle.
+ * @note When the URS bit of the TIMx_CR1 register is set, only counter
+ * overflow/underflow generates an update interrupt or DMA request (if
+ * enabled)
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS)
+
+/**
+ * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register.
+ * @param __HANDLE__ TIM handle.
+ * @note When the URS bit of the TIMx_CR1 register is reset, any of the
+ * following events generate an update interrupt or DMA request (if
+ * enabled):
+ * _ Counter overflow underflow
+ * _ Setting the UG bit
+ * _ Update generation through the slave mode controller
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS)
+
+/**
+ * @brief Set the TIM Capture x input polarity on runtime.
+ * @param __HANDLE__ TIM handle.
+ * @param __CHANNEL__ TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __POLARITY__ Polarity for TIx source
+ * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+ * @retval None
+ */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ do{ \
+ TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+ }while(0)
+
+/** @brief Select the Capture/compare DMA request source.
+ * @param __HANDLE__ specifies the TIM Handle.
+ * @param __CCDMA__ specifies Capture/compare DMA request source
+ * This parameter can be one of the following values:
+ * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event
+ * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event
+ * @retval None
+ */
+#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \
+ MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__))
+
+/**
+ * @}
+ */
+/* End of exported macros ----------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Constants TIM Private Constants
+ * @{
+ */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+ * @}
+ */
+/* End of private constants --------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \
+ ((__MODE__) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \
+ ((__MODE__) == TIM_CLEARINPUTSOURCE_NONE))
+
+#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \
+ ((__BASE__) == TIM_DMABASE_CR2) || \
+ ((__BASE__) == TIM_DMABASE_SMCR) || \
+ ((__BASE__) == TIM_DMABASE_DIER) || \
+ ((__BASE__) == TIM_DMABASE_SR) || \
+ ((__BASE__) == TIM_DMABASE_EGR) || \
+ ((__BASE__) == TIM_DMABASE_CCMR1) || \
+ ((__BASE__) == TIM_DMABASE_CCMR2) || \
+ ((__BASE__) == TIM_DMABASE_CCER) || \
+ ((__BASE__) == TIM_DMABASE_CNT) || \
+ ((__BASE__) == TIM_DMABASE_PSC) || \
+ ((__BASE__) == TIM_DMABASE_ARR) || \
+ ((__BASE__) == TIM_DMABASE_RCR) || \
+ ((__BASE__) == TIM_DMABASE_CCR1) || \
+ ((__BASE__) == TIM_DMABASE_CCR2) || \
+ ((__BASE__) == TIM_DMABASE_CCR3) || \
+ ((__BASE__) == TIM_DMABASE_CCR4) || \
+ ((__BASE__) == TIM_DMABASE_BDTR) || \
+ ((__BASE__) == TIM_DMABASE_OR1) || \
+ ((__BASE__) == TIM_DMABASE_CCMR3) || \
+ ((__BASE__) == TIM_DMABASE_CCR5) || \
+ ((__BASE__) == TIM_DMABASE_CCR6) || \
+ ((__BASE__) == TIM_DMABASE_OR2) || \
+ ((__BASE__) == TIM_DMABASE_OR3))
+
+#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
+
+#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \
+ ((__MODE__) == TIM_COUNTERMODE_DOWN) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \
+ ((__MODE__) == TIM_UIFREMAP_ENABLE))
+
+#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \
+ ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \
+ ((__DIV__) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \
+ ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE))
+
+#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \
+ ((__STATE__) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \
+ ((__POLARITY__) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \
+ ((__POLARITY__) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \
+ ((__STATE__) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \
+ ((__STATE__) == TIM_OCNIDLESTATE_RESET))
+
+#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \
+ ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING))
+
+#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \
+ ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \
+ ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \
+ ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((__SELECTION__) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV2) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV4) || \
+ ((__PRESCALER__) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_CCX_CHANNEL(__INSTANCE__, __CHANNEL__) (IS_TIM_CCX_INSTANCE(__INSTANCE__, __CHANNEL__) && \
+ ((__CHANNEL__) != (TIM_CHANNEL_5)) && \
+ ((__CHANNEL__) != (TIM_CHANNEL_6)))
+
+#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \
+ ((__MODE__) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \
+ ((__MODE__) == TIM_ENCODERMODE_TI2) || \
+ ((__MODE__) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))
+
+#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \
+ ((__CHANNEL__) == TIM_CHANNEL_2) || \
+ ((__CHANNEL__) == TIM_CHANNEL_3) || \
+ ((__CHANNEL__) == TIM_CHANNEL_4) || \
+ ((__CHANNEL__) == TIM_CHANNEL_5) || \
+ ((__CHANNEL__) == TIM_CHANNEL_6) || \
+ ((__CHANNEL__) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \
+ ((__CHANNEL__) == TIM_CHANNEL_2))
+
+#define IS_TIM_PERIOD(__HANDLE__, __PERIOD__) ((IS_TIM_32B_COUNTER_INSTANCE(((__HANDLE__)->Instance)) == 0U) ? \
+ (((__PERIOD__) > 0U) && ((__PERIOD__) <= 0x0000FFFFU)) : \
+ ((__PERIOD__) > 0U))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \
+ ((__CHANNEL__) == TIM_CHANNEL_2) || \
+ ((__CHANNEL__) == TIM_CHANNEL_3))
+
+#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \
+ ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3))
+
+#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \
+ ((__STATE__) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \
+ ((__STATE__) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_1) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_2) || \
+ ((__LEVEL__) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL)
+
+#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \
+ ((__STATE__) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \
+ ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_BREAK2_STATE(__STATE__) (((__STATE__) == TIM_BREAK2_ENABLE) || \
+ ((__STATE__) == TIM_BREAK2_DISABLE))
+
+#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \
+ ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_GROUPCH5(__OCREF__) ((((__OCREF__) & 0x1FFFFFFFU) == 0x00000000U))
+
+#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \
+ ((__SOURCE__) == TIM_TRGO_ENABLE) || \
+ ((__SOURCE__) == TIM_TRGO_UPDATE) || \
+ ((__SOURCE__) == TIM_TRGO_OC1) || \
+ ((__SOURCE__) == TIM_TRGO_OC1REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC2REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC3REF) || \
+ ((__SOURCE__) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_TRGO2_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO2_RESET) || \
+ ((__SOURCE__) == TIM_TRGO2_ENABLE) || \
+ ((__SOURCE__) == TIM_TRGO2_UPDATE) || \
+ ((__SOURCE__) == TIM_TRGO2_OC1) || \
+ ((__SOURCE__) == TIM_TRGO2_OC1REF) || \
+ ((__SOURCE__) == TIM_TRGO2_OC2REF) || \
+ ((__SOURCE__) == TIM_TRGO2_OC3REF) || \
+ ((__SOURCE__) == TIM_TRGO2_OC3REF) || \
+ ((__SOURCE__) == TIM_TRGO2_OC4REF) || \
+ ((__SOURCE__) == TIM_TRGO2_OC5REF) || \
+ ((__SOURCE__) == TIM_TRGO2_OC6REF) || \
+ ((__SOURCE__) == TIM_TRGO2_OC4REF_RISINGFALLING) || \
+ ((__SOURCE__) == TIM_TRGO2_OC6REF_RISINGFALLING) || \
+ ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \
+ ((__SOURCE__) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
+ ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \
+ ((__SOURCE__) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
+
+#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \
+ ((__MODE__) == TIM_SLAVEMODE_RESET) || \
+ ((__MODE__) == TIM_SLAVEMODE_GATED) || \
+ ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \
+ ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \
+ ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+
+#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \
+ ((__MODE__) == TIM_OCMODE_PWM2) || \
+ ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \
+ ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \
+ ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM1) || \
+ ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM2))
+
+#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \
+ ((__MODE__) == TIM_OCMODE_ACTIVE) || \
+ ((__MODE__) == TIM_OCMODE_INACTIVE) || \
+ ((__MODE__) == TIM_OCMODE_TOGGLE) || \
+ ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \
+ ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
+ ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2))
+
+#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+ ((__SELECTION__) == TIM_TS_ITR1) || \
+ ((__SELECTION__) == TIM_TS_ITR2) || \
+ ((__SELECTION__) == TIM_TS_ITR3) || \
+ ((__SELECTION__) == TIM_TS_TI1F_ED) || \
+ ((__SELECTION__) == TIM_TS_TI1FP1) || \
+ ((__SELECTION__) == TIM_TS_TI2FP2) || \
+ ((__SELECTION__) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+ ((__SELECTION__) == TIM_TS_ITR1) || \
+ ((__SELECTION__) == TIM_TS_ITR2) || \
+ ((__SELECTION__) == TIM_TS_ITR3) || \
+ ((__SELECTION__) == TIM_TS_NONE))
+
+#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+
+#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \
+ ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+ ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U))
+
+#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU)
+
+#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU)
+
+#define IS_TIM_BREAK_SYSTEM(__CONFIG__) (((__CONFIG__) == TIM_BREAK_SYSTEM_ECC) || \
+ ((__CONFIG__) == TIM_BREAK_SYSTEM_PVD) || \
+ ((__CONFIG__) == TIM_BREAK_SYSTEM_SRAM2_PARITY_ERROR) || \
+ ((__CONFIG__) == TIM_BREAK_SYSTEM_LOCKUP))
+
+#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \
+ ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U)))
+
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC))
+
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U))))
+
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP)))
+
+#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? (__HANDLE__)->ChannelState[3] :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? (__HANDLE__)->ChannelState[4] :\
+ (__HANDLE__)->ChannelState[5])
+
+#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__)) :\
+ ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__)))
+
+#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \
+ (__HANDLE__)->ChannelState[0] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[1] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[2] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[3] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[4] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[5] = \
+ (__CHANNEL_STATE__); \
+ } while(0)
+
+#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\
+ (__HANDLE__)->ChannelNState[3])
+
+#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\
+ ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__)))
+
+#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \
+ (__HANDLE__)->ChannelNState[0] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[1] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[2] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[3] = \
+ (__CHANNEL_STATE__); \
+ } while(0)
+
+/**
+ * @}
+ */
+/* End of private macros -----------------------------------------------------*/
+
+/* Include TIM HAL Extended module */
+#include "stm32l4xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions
+ * @brief Time Base functions
+ * @{
+ */
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions
+ * @brief TIM Output Compare functions
+ * @{
+ */
+/* Timer Output Compare functions *********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
+ uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions
+ * @brief TIM PWM functions
+ * @{
+ */
+/* Timer PWM functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
+ uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions
+ * @brief TIM Input Capture functions
+ * @{
+ */
+/* Timer Input Capture functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions
+ * @brief TIM One Pulse functions
+ * @{
+ */
+/* Timer One Pulse functions **************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions
+ * @brief TIM Encoder functions
+ * @{
+ */
+/* Timer Encoder functions ****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1,
+ uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ * @{
+ */
+/* Interrupt Handler functions ***********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig,
+ uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig,
+ uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig,
+ uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig,
+ uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim,
+ const TIM_ClearInputConfigTypeDef *sClearInputConfig,
+ uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, const uint32_t *BurstBuffer,
+ uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, const uint32_t *BurstBuffer,
+ uint32_t BurstLength, uint32_t DataLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer,
+ uint32_t BurstLength, uint32_t DataLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID,
+ pTIM_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim);
+
+/* Peripheral Channel state functions ************************************************/
+HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim);
+HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
+void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMAError(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+void TIM_ResetCallback(TIM_HandleTypeDef *htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32L4xx_HAL_TIM_H */
diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h
new file mode 100644
index 0000000..ca77ed7
--- /dev/null
+++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_tim_ex.h
@@ -0,0 +1,439 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @brief Header file of TIM HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32L4xx_HAL_TIM_EX_H
+#define STM32L4xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+ * @brief TIM Break/Break2 input configuration
+ */
+typedef struct
+{
+ uint32_t Source; /*!< Specifies the source of the timer break input.
+ This parameter can be a value of @ref TIMEx_Break_Input_Source */
+ uint32_t Enable; /*!< Specifies whether or not the break input source is enabled.
+ This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
+ uint32_t Polarity; /*!< Specifies the break input source polarity.
+ This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity
+ Not relevant when analog watchdog output of the DFSDM1 used as break input source */
+} TIMEx_BreakInputConfigTypeDef;
+
+/**
+ * @}
+ */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Remap TIM Extended Remapping
+ * @{
+ */
+#define TIM_TIM1_ETR_ADC1_NONE 0x00000000U /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ETR_ADC1_AWD1 TIM1_OR1_ETR_ADC1_RMP_0 /*!< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ETR_ADC1_AWD2 TIM1_OR1_ETR_ADC1_RMP_1 /*!< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_ETR_ADC1_RMP_0) /*!< TIM1_ETR is connected to ADC1 AWD3 */
+#if defined (ADC3)
+#define TIM_TIM1_ETR_ADC3_NONE 0x00000000U /*!< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ETR_ADC3_AWD1 TIM1_OR1_ETR_ADC3_RMP_0 /*!< TIM1_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM1_ETR_ADC3_AWD2 TIM1_OR1_ETR_ADC3_RMP_1 /*!< TIM1_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM1_ETR_ADC3_AWD3 (TIM1_OR1_ETR_ADC3_RMP_1 | TIM1_OR1_ETR_ADC3_RMP_0) /*!< TIM1_ETR is connected to ADC3 AWD3 */
+#endif /* ADC3 */
+#define TIM_TIM1_TI1_GPIO 0x00000000U /*!< TIM1 TI1 is connected to GPIO */
+#define TIM_TIM1_TI1_COMP1 TIM1_OR1_TI1_RMP /*!< TIM1 TI1 is connected to COMP1 */
+#define TIM_TIM1_ETR_GPIO 0x00000000U /*!< TIM1_ETR is connected to GPIO */
+#define TIM_TIM1_ETR_COMP1 TIM1_OR2_ETRSEL_0 /*!< TIM1_ETR is connected to COMP1 output */
+#if defined(COMP2)
+#define TIM_TIM1_ETR_COMP2 TIM1_OR2_ETRSEL_1 /*!< TIM1_ETR is connected to COMP2 output */
+#endif /* COMP2 */
+
+#if defined (USB_OTG_FS)
+#define TIM_TIM2_ITR1_TIM8_TRGO 0x00000000U /*!< TIM2_ITR1 is connected to TIM8_TRGO */
+#define TIM_TIM2_ITR1_OTG_FS_SOF TIM2_OR1_ITR1_RMP /*!< TIM2_ITR1 is connected to OTG_FS SOF */
+#else
+#if defined(STM32L471xx)
+#define TIM_TIM2_ITR1_TIM8_TRGO 0x00000000U /*!< TIM2_ITR1 is connected to TIM8_TRGO */
+#define TIM_TIM2_ITR1_NONE TIM2_OR1_ITR1_RMP /*!< No internal trigger on TIM2_ITR1 */
+#else
+#define TIM_TIM2_ITR1_NONE 0x00000000U /*!< No internal trigger on TIM2_ITR1 */
+#define TIM_TIM2_ITR1_USB_SOF TIM2_OR1_ITR1_RMP /*!< TIM2_ITR1 is connected to USB SOF */
+#endif /* STM32L471xx */
+#endif /* USB_OTG_FS */
+#define TIM_TIM2_ETR_GPIO 0x00000000U /*!< TIM2_ETR is connected to GPIO */
+#define TIM_TIM2_ETR_LSE TIM2_OR1_ETR1_RMP /*!< TIM2_ETR is connected to LSE */
+#define TIM_TIM2_ETR_COMP1 TIM2_OR2_ETRSEL_0 /*!< TIM2_ETR is connected to COMP1 output */
+#if defined(COMP2)
+#define TIM_TIM2_ETR_COMP2 TIM2_OR2_ETRSEL_1 /*!< TIM2_ETR is connected to COMP2 output */
+#endif /* COMP2 */
+#define TIM_TIM2_TI4_GPIO 0x00000000U /*!< TIM2 TI4 is connected to GPIO */
+#define TIM_TIM2_TI4_COMP1 TIM2_OR1_TI4_RMP_0 /*!< TIM2 TI4 is connected to COMP1 output */
+#if defined(COMP2)
+#define TIM_TIM2_TI4_COMP2 TIM2_OR1_TI4_RMP_1 /*!< TIM2 TI4 is connected to COMP2 output */
+#define TIM_TIM2_TI4_COMP1_COMP2 (TIM2_OR1_TI4_RMP_1| TIM2_OR1_TI4_RMP_0) /*!< TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output2 */
+#endif /* COMP2 */
+
+#if defined (TIM3)
+#define TIM_TIM3_TI1_GPIO 0x00000000U /*!< TIM3 TI1 is connected to GPIO */
+#define TIM_TIM3_TI1_COMP1 TIM3_OR1_TI1_RMP_0 /*!< TIM3 TI1 is connected to COMP1 output */
+#define TIM_TIM3_TI1_COMP2 TIM3_OR1_TI1_RMP_1 /*!< TIM3 TI1 is connected to COMP2 output */
+#define TIM_TIM3_TI1_COMP1_COMP2 (TIM3_OR1_TI1_RMP_1 | TIM3_OR1_TI1_RMP_0) /*!< TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output2 */
+#define TIM_TIM3_ETR_GPIO 0x00000000U /*!< TIM3_ETR is connected to GPIO */
+#define TIM_TIM3_ETR_COMP1 TIM3_OR2_ETRSEL_0 /*!< TIM3_ETR is connected to COMP1 output */
+#endif /* TIM3 */
+
+#if defined (TIM8)
+#if defined(ADC2) && defined(ADC3)
+#define TIM_TIM8_ETR_ADC2_NONE 0x00000000U /*!< TIM8_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM8_ETR_ADC2_AWD1 TIM8_OR1_ETR_ADC2_RMP_0 /*!< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ETR_ADC2_AWD2 TIM8_OR1_ETR_ADC2_RMP_1 /*!< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ETR_ADC2_AWD3 (TIM8_OR1_ETR_ADC2_RMP_1 | TIM8_OR1_ETR_ADC2_RMP_0) /*!< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM8_ETR_ADC3_NONE 0x00000000U /*!< TIM8_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM8_ETR_ADC3_AWD1 TIM8_OR1_ETR_ADC3_RMP_0 /*!< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ETR_ADC3_AWD2 TIM8_OR1_ETR_ADC3_RMP_1 /*!< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ETR_ADC3_AWD3 (TIM8_OR1_ETR_ADC3_RMP_1 | TIM8_OR1_ETR_ADC3_RMP_0) /*!< TIM8_ETR is connected to ADC3 AWD3 */
+#endif /* ADC2 && ADC3 */
+
+#define TIM_TIM8_TI1_GPIO 0x00000000U /*!< TIM8 TI1 is connected to GPIO */
+#define TIM_TIM8_TI1_COMP2 TIM8_OR1_TI1_RMP /*!< TIM8 TI1 is connected to COMP1 */
+#define TIM_TIM8_ETR_GPIO 0x00000000U /*!< TIM8_ETR is connected to GPIO */
+#define TIM_TIM8_ETR_COMP1 TIM8_OR2_ETRSEL_0 /*!< TIM8_ETR is connected to COMP1 output */
+#define TIM_TIM8_ETR_COMP2 TIM8_OR2_ETRSEL_1 /*!< TIM8_ETR is connected to COMP2 output */
+#endif /* TIM8 */
+
+#define TIM_TIM15_TI1_GPIO 0x00000000U /*!< TIM15 TI1 is connected to GPIO */
+#define TIM_TIM15_TI1_LSE TIM15_OR1_TI1_RMP /*!< TIM15 TI1 is connected to LSE */
+#define TIM_TIM15_ENCODERMODE_NONE 0x00000000U /*!< No redirection */
+#define TIM_TIM15_ENCODERMODE_TIM2 TIM15_OR1_ENCODER_MODE_0 /*!< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
+#if defined (TIM3)
+#define TIM_TIM15_ENCODERMODE_TIM3 TIM15_OR1_ENCODER_MODE_1 /*!< TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
+#endif /* TIM3 */
+#if defined (TIM4)
+#define TIM_TIM15_ENCODERMODE_TIM4 (TIM15_OR1_ENCODER_MODE_1 | TIM15_OR1_ENCODER_MODE_0) /*!< TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
+#endif /* TIM4 */
+
+#define TIM_TIM16_TI1_GPIO 0x00000000U /*!< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_TI1_LSI TIM16_OR1_TI1_RMP_0 /*!< TIM16 TI1 is connected to LSI */
+#define TIM_TIM16_TI1_LSE TIM16_OR1_TI1_RMP_1 /*!< TIM16 TI1 is connected to LSE */
+#define TIM_TIM16_TI1_RTC (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0) /*!< TIM16 TI1 is connected to RTC wakeup interrupt */
+#if defined (TIM16_OR1_TI1_RMP_2)
+#define TIM_TIM16_TI1_MSI TIM16_OR1_TI1_RMP_2 /*!< TIM16 TI1 is connected to MSI */
+#define TIM_TIM16_TI1_HSE_32 (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_0) /*!< TIM16 TI1 is connected to HSE div 32 */
+#define TIM_TIM16_TI1_MCO (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_1) /*!< TIM16 TI1 is connected to MCO */
+#endif /* TIM16_OR1_TI1_RMP_2 */
+
+#if defined (TIM17)
+#define TIM_TIM17_TI1_GPIO 0x00000000U /*!< TIM17 TI1 is connected to GPIO */
+#define TIM_TIM17_TI1_MSI TIM17_OR1_TI1_RMP_0 /*!< TIM17 TI1 is connected to MSI */
+#define TIM_TIM17_TI1_HSE_32 TIM17_OR1_TI1_RMP_1 /*!< TIM17 TI1 is connected to HSE div 32 */
+#define TIM_TIM17_TI1_MCO (TIM17_OR1_TI1_RMP_1 | TIM17_OR1_TI1_RMP_0) /*!< TIM17 TI1 is connected to MCO */
+#endif /* TIM17 */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break_Input TIM Extended Break input
+ * @{
+ */
+#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */
+#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source
+ * @{
+ */
+#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /*!< An external source (GPIO) is connected to the BKIN pin */
+#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /*!< The COMP1 output is connected to the break input */
+#define TIM_BREAKINPUTSOURCE_COMP2 0x00000004U /*!< The COMP2 output is connected to the break input */
+#if defined (DFSDM1_Channel0)
+#define TIM_BREAKINPUTSOURCE_DFSDM1 0x00000008U /*!< The analog watchdog output of the DFSDM1 peripheral is connected to the break input */
+#endif /* DFSDM1_Channel0 */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
+ * @{
+ */
+#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */
+#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
+ * @{
+ */
+#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */
+#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+/* End of exported macro -----------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros
+ * @{
+ */
+#define IS_TIM_REMAP(__REMAP__) (((__REMAP__) <= (uint32_t)0x0001C01F))
+
+#define IS_TIM_BREAKINPUT(__BREAKINPUT__) (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK) || \
+ ((__BREAKINPUT__) == TIM_BREAKINPUT_BRK2))
+
+#if defined (DFSDM1_Channel0)
+#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
+ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \
+ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2) || \
+ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_DFSDM1))
+#else
+#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \
+ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1) || \
+ ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP2))
+#endif /* DFSDM1_Channel0 */
+
+#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \
+ ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE))
+
+#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \
+ ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH))
+
+/**
+ * @}
+ */
+/* End of private macro ------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
+ uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
+ uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Extended Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
+ uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
+ uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
+ uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
+ const TIM_MasterConfigTypeDef *sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput,
+ const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig);
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+ * @brief Extended Callbacks functions
+ * @{
+ */
+/* Extended Callback **********************************************************/
+void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+ * @brief Extended Peripheral State functions
+ * @{
+ */
+/* Extended Peripheral State functions ***************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim);
+HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private functions----------------------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions
+ * @{
+ */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/* End of private functions --------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32L4xx_HAL_TIM_EX_H */
diff --git a/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_tim.h b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_tim.h
new file mode 100644
index 0000000..bbde1c9
--- /dev/null
+++ b/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_ll_tim.h
@@ -0,0 +1,5104 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_ll_tim.h
+ * @author MCD Application Team
+ * @brief Header file of TIM LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_LL_TIM_H
+#define __STM32L4xx_LL_TIM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx.h"
+
+/** @addtogroup STM32L4xx_LL_Driver
+ * @{
+ */
+
+#if defined (TIM1) || defined (TIM8) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM15) || defined (TIM16) || defined (TIM17) || defined (TIM6) || defined (TIM7)
+
+/** @defgroup TIM_LL TIM
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup TIM_LL_Private_Variables TIM Private Variables
+ * @{
+ */
+static const uint8_t OFFSET_TAB_CCMRx[] =
+{
+ 0x00U, /* 0: TIMx_CH1 */
+ 0x00U, /* 1: TIMx_CH1N */
+ 0x00U, /* 2: TIMx_CH2 */
+ 0x00U, /* 3: TIMx_CH2N */
+ 0x04U, /* 4: TIMx_CH3 */
+ 0x04U, /* 5: TIMx_CH3N */
+ 0x04U, /* 6: TIMx_CH4 */
+ 0x3CU, /* 7: TIMx_CH5 */
+ 0x3CU /* 8: TIMx_CH6 */
+};
+
+static const uint8_t SHIFT_TAB_OCxx[] =
+{
+ 0U, /* 0: OC1M, OC1FE, OC1PE */
+ 0U, /* 1: - NA */
+ 8U, /* 2: OC2M, OC2FE, OC2PE */
+ 0U, /* 3: - NA */
+ 0U, /* 4: OC3M, OC3FE, OC3PE */
+ 0U, /* 5: - NA */
+ 8U, /* 6: OC4M, OC4FE, OC4PE */
+ 0U, /* 7: OC5M, OC5FE, OC5PE */
+ 8U /* 8: OC6M, OC6FE, OC6PE */
+};
+
+static const uint8_t SHIFT_TAB_ICxx[] =
+{
+ 0U, /* 0: CC1S, IC1PSC, IC1F */
+ 0U, /* 1: - NA */
+ 8U, /* 2: CC2S, IC2PSC, IC2F */
+ 0U, /* 3: - NA */
+ 0U, /* 4: CC3S, IC3PSC, IC3F */
+ 0U, /* 5: - NA */
+ 8U, /* 6: CC4S, IC4PSC, IC4F */
+ 0U, /* 7: - NA */
+ 0U /* 8: - NA */
+};
+
+static const uint8_t SHIFT_TAB_CCxP[] =
+{
+ 0U, /* 0: CC1P */
+ 2U, /* 1: CC1NP */
+ 4U, /* 2: CC2P */
+ 6U, /* 3: CC2NP */
+ 8U, /* 4: CC3P */
+ 10U, /* 5: CC3NP */
+ 12U, /* 6: CC4P */
+ 16U, /* 7: CC5P */
+ 20U /* 8: CC6P */
+};
+
+static const uint8_t SHIFT_TAB_OISx[] =
+{
+ 0U, /* 0: OIS1 */
+ 1U, /* 1: OIS1N */
+ 2U, /* 2: OIS2 */
+ 3U, /* 3: OIS2N */
+ 4U, /* 4: OIS3 */
+ 5U, /* 5: OIS3N */
+ 6U, /* 6: OIS4 */
+ 8U, /* 7: OIS5 */
+ 10U /* 8: OIS6 */
+};
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup TIM_LL_Private_Constants TIM Private Constants
+ * @{
+ */
+
+/* Defines used for the bit position in the register and perform offsets */
+#define TIM_POSITION_BRK_SOURCE (POSITION_VAL(Source) & 0x1FUL)
+
+/* Generic bit definitions for TIMx_OR2 register */
+#define TIMx_OR2_BKINP TIM1_OR2_BKINP /*!< BRK BKIN input polarity */
+#define TIMx_OR2_ETRSEL TIM1_OR2_ETRSEL /*!< TIMx ETR source selection */
+
+/* Remap mask definitions */
+#define TIMx_OR1_RMP_SHIFT 16U
+#define TIMx_OR1_RMP_MASK 0x0000FFFFU
+#if defined(ADC3)
+#define TIM1_OR1_RMP_MASK ((TIM1_OR1_ETR_ADC1_RMP | TIM1_OR1_ETR_ADC3_RMP | TIM1_OR1_TI1_RMP) << TIMx_OR1_RMP_SHIFT)
+#else
+#define TIM1_OR1_RMP_MASK ((TIM1_OR1_ETR_ADC1_RMP | TIM1_OR1_TI1_RMP) << TIMx_OR1_RMP_SHIFT)
+#endif /* ADC3 */
+#define TIM2_OR1_RMP_MASK ((TIM2_OR1_TI4_RMP | TIM2_OR1_ETR1_RMP | TIM2_OR1_ITR1_RMP) << TIMx_OR1_RMP_SHIFT)
+#define TIM3_OR1_RMP_MASK (TIM3_OR1_TI1_RMP << TIMx_OR1_RMP_SHIFT)
+#if defined(ADC2) && defined(ADC3)
+#define TIM8_OR1_RMP_MASK ((TIM8_OR1_ETR_ADC2_RMP | TIM8_OR1_ETR_ADC3_RMP | TIM8_OR1_TI1_RMP) << TIMx_OR1_RMP_SHIFT)
+#else
+#define TIM8_OR1_RMP_MASK (TIM8_OR1_TI1_RMP << TIMx_OR1_RMP_SHIFT)
+#endif /* ADC2 & ADC3 */
+#define TIM15_OR1_RMP_MASK (TIM15_OR1_TI1_RMP << TIMx_OR1_RMP_SHIFT)
+#define TIM16_OR1_RMP_MASK (TIM16_OR1_TI1_RMP << TIMx_OR1_RMP_SHIFT)
+#define TIM17_OR1_RMP_MASK (TIM17_OR1_TI1_RMP << TIMx_OR1_RMP_SHIFT)
+
+/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */
+#define DT_DELAY_1 ((uint8_t)0x7F)
+#define DT_DELAY_2 ((uint8_t)0x3F)
+#define DT_DELAY_3 ((uint8_t)0x1F)
+#define DT_DELAY_4 ((uint8_t)0x1F)
+
+/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */
+#define DT_RANGE_1 ((uint8_t)0x00)
+#define DT_RANGE_2 ((uint8_t)0x80)
+#define DT_RANGE_3 ((uint8_t)0xC0)
+#define DT_RANGE_4 ((uint8_t)0xE0)
+
+/** Legacy definitions for compatibility purpose
+@cond 0
+ */
+#if defined(DFSDM1_Channel0)
+#define TIMx_OR2_BKDFBK0E TIMx_OR2_BKDF1BK0E
+#define TIMx_OR3_BK2DFBK1E TIMx_OR3_BK2DF1BK1E
+#endif /* DFSDM1_Channel0 */
+/**
+@endcond
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_LL_Private_Macros TIM Private Macros
+ * @{
+ */
+/** @brief Convert channel id into channel index.
+ * @param __CHANNEL__ This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval none
+ */
+#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \
+ (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH4) ? 6U :\
+ ((__CHANNEL__) == LL_TIM_CHANNEL_CH5) ? 7U : 8U)
+
+/** @brief Calculate the deadtime sampling period(in ps).
+ * @param __TIMCLK__ timer input clock frequency (in Hz).
+ * @param __CKD__ This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
+ * @retval none
+ */
+#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \
+ (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \
+ ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \
+ ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U)))
+/**
+ * @}
+ */
+
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure
+ * @{
+ */
+
+/**
+ * @brief TIM Time Base configuration structure definition.
+ */
+typedef struct
+{
+ uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetPrescaler().*/
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetCounterMode().*/
+
+ uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
+ Some timer instances may support 32 bits counters. In that case this parameter must
+ be a number between 0x0000 and 0xFFFFFFFF.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetAutoReload().*/
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetClockDivision().*/
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ GP timers: this parameter must be a number between Min_Data = 0x00 and
+ Max_Data = 0xFF.
+ Advanced timers: this parameter must be a number between Min_Data = 0x0000 and
+ Max_Data = 0xFFFF.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetRepetitionCounter().*/
+} LL_TIM_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare configuration structure definition.
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the output mode.
+ This parameter can be a value of @ref TIM_LL_EC_OCMODE.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetMode().*/
+
+ uint32_t OCState; /*!< Specifies the TIM Output Compare state.
+ This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
+
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
+
+ uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state.
+ This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
+
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
+
+ uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
+
+ This feature can be modified afterwards using unitary function
+ LL_TIM_OC_SetCompareCHx (x=1..6).*/
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetPolarity().*/
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetPolarity().*/
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetIdleState().*/
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetIdleState().*/
+} LL_TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM Input Capture configuration structure definition.
+ */
+
+typedef struct
+{
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
+
+ uint32_t ICActiveInput; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetActiveInput().*/
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_LL_EC_ICPSC.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
+} LL_TIM_IC_InitTypeDef;
+
+
+/**
+ * @brief TIM Encoder interface configuration structure definition.
+ */
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4).
+ This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetEncoderMode().*/
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input.
+ This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
+
+ uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source
+ This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetActiveInput().*/
+
+ uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value.
+ This parameter can be a value of @ref TIM_LL_EC_ICPSC.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
+
+ uint32_t IC1Filter; /*!< Specifies the TI1 input filter.
+ This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input.
+ This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
+
+ uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source
+ This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetActiveInput().*/
+
+ uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value.
+ This parameter can be a value of @ref TIM_LL_EC_ICPSC.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
+
+ uint32_t IC2Filter; /*!< Specifies the TI2 input filter.
+ This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
+
+} LL_TIM_ENCODER_InitTypeDef;
+
+/**
+ * @brief TIM Hall sensor interface configuration structure definition.
+ */
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input.
+ This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
+
+ uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value.
+ Prescaler must be set to get a maximum counter period longer than the
+ time interval between 2 consecutive changes on the Hall inputs.
+ This parameter can be a value of @ref TIM_LL_EC_ICPSC.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
+
+ uint32_t IC1Filter; /*!< Specifies the TI1 input filter.
+ This parameter can be a value of
+ @ref TIM_LL_EC_IC_FILTER.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
+
+ uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register.
+ A positive pulse (TRGO event) is generated with a programmable delay every time
+ a change occurs on the Hall inputs.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetCompareCH2().*/
+} LL_TIM_HALLSENSOR_InitTypeDef;
+
+/**
+ * @brief BDTR (Break and Dead Time) structure definition
+ */
+typedef struct
+{
+ uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode.
+ This parameter can be a value of @ref TIM_LL_EC_OSSR
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetOffStates()
+
+ @note This bit-field cannot be modified as long as LOCK level 2 has been
+ programmed. */
+
+ uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state.
+ This parameter can be a value of @ref TIM_LL_EC_OSSI
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetOffStates()
+
+ @note This bit-field cannot be modified as long as LOCK level 2 has been
+ programmed. */
+
+ uint32_t LockLevel; /*!< Specifies the LOCK level parameters.
+ This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL
+
+ @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR
+ register has been written, their content is frozen until the next reset.*/
+
+ uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the
+ switching-on of the outputs.
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetDeadTime()
+
+ @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been
+ programmed. */
+
+ uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not.
+ This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE
+
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK()
+
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
+
+ uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity.
+ This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_ConfigBRK()
+
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
+
+ uint32_t BreakFilter; /*!< Specifies the TIM Break Filter.
+ This parameter can be a value of @ref TIM_LL_EC_BREAK_FILTER
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_ConfigBRK()
+
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
+
+ uint32_t Break2State; /*!< Specifies whether the TIM Break2 input is enabled or not.
+ This parameter can be a value of @ref TIM_LL_EC_BREAK2_ENABLE
+
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_EnableBRK2() or @ref LL_TIM_DisableBRK2()
+
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
+
+ uint32_t Break2Polarity; /*!< Specifies the TIM Break2 Input pin polarity.
+ This parameter can be a value of @ref TIM_LL_EC_BREAK2_POLARITY
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_ConfigBRK2()
+
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
+
+ uint32_t Break2Filter; /*!< Specifies the TIM Break2 Filter.
+ This parameter can be a value of @ref TIM_LL_EC_BREAK2_FILTER
+
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_ConfigBRK2()
+
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
+
+ uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not.
+ This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE
+
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput()
+
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
+} LL_TIM_BDTR_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_TIM_ReadReg function.
+ * @{
+ */
+#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */
+#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */
+#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */
+#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */
+#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */
+#define LL_TIM_SR_CC5IF TIM_SR_CC5IF /*!< Capture/compare 5 interrupt flag */
+#define LL_TIM_SR_CC6IF TIM_SR_CC6IF /*!< Capture/compare 6 interrupt flag */
+#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */
+#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */
+#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */
+#define LL_TIM_SR_B2IF TIM_SR_B2IF /*!< Second break interrupt flag */
+#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */
+#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */
+#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */
+#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */
+#define LL_TIM_SR_SBIF TIM_SR_SBIF /*!< System Break interrupt flag */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable
+ * @{
+ */
+#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */
+#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_BREAK2_ENABLE Break2 Enable
+ * @{
+ */
+#define LL_TIM_BREAK2_DISABLE 0x00000000U /*!< Break2 function disabled */
+#define LL_TIM_BREAK2_ENABLE TIM_BDTR_BK2E /*!< Break2 function enabled */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable
+ * @{
+ */
+#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */
+#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/** @defgroup TIM_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions.
+ * @{
+ */
+#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */
+#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */
+#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */
+#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */
+#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */
+#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */
+#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */
+#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source
+ * @{
+ */
+#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */
+#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode
+ * @{
+ */
+#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */
+#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode
+ * @{
+ */
+#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as upcounter */
+#define LL_TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as downcounter */
+#define LL_TIM_COUNTERMODE_CENTER_DOWN TIM_CR1_CMS_0 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting down. */
+#define LL_TIM_COUNTERMODE_CENTER_UP TIM_CR1_CMS_1 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up */
+#define LL_TIM_COUNTERMODE_CENTER_UP_DOWN TIM_CR1_CMS /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up or down. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_CLOCKDIVISION Clock Division
+ * @{
+ */
+#define LL_TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< tDTS=tCK_INT */
+#define LL_TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< tDTS=2*tCK_INT */
+#define LL_TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< tDTS=4*tCK_INT */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_COUNTERDIRECTION Counter Direction
+ * @{
+ */
+#define LL_TIM_COUNTERDIRECTION_UP 0x00000000U /*!< Timer counter counts up */
+#define LL_TIM_COUNTERDIRECTION_DOWN TIM_CR1_DIR /*!< Timer counter counts down */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_CCUPDATESOURCE Capture Compare Update Source
+ * @{
+ */
+#define LL_TIM_CCUPDATESOURCE_COMG_ONLY 0x00000000U /*!< Capture/compare control bits are updated by setting the COMG bit only */
+#define LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI TIM_CR2_CCUS /*!< Capture/compare control bits are updated by setting the COMG bit or when a rising edge occurs on trigger input (TRGI) */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_CCDMAREQUEST Capture Compare DMA Request
+ * @{
+ */
+#define LL_TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when CCx event occurs */
+#define LL_TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_LOCKLEVEL Lock Level
+ * @{
+ */
+#define LL_TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF - No bit is write protected */
+#define LL_TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */
+#define LL_TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */
+#define LL_TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_CHANNEL Channel
+ * @{
+ */
+#define LL_TIM_CHANNEL_CH1 TIM_CCER_CC1E /*!< Timer input/output channel 1 */
+#define LL_TIM_CHANNEL_CH1N TIM_CCER_CC1NE /*!< Timer complementary output channel 1 */
+#define LL_TIM_CHANNEL_CH2 TIM_CCER_CC2E /*!< Timer input/output channel 2 */
+#define LL_TIM_CHANNEL_CH2N TIM_CCER_CC2NE /*!< Timer complementary output channel 2 */
+#define LL_TIM_CHANNEL_CH3 TIM_CCER_CC3E /*!< Timer input/output channel 3 */
+#define LL_TIM_CHANNEL_CH3N TIM_CCER_CC3NE /*!< Timer complementary output channel 3 */
+#define LL_TIM_CHANNEL_CH4 TIM_CCER_CC4E /*!< Timer input/output channel 4 */
+#define LL_TIM_CHANNEL_CH5 TIM_CCER_CC5E /*!< Timer output channel 5 */
+#define LL_TIM_CHANNEL_CH6 TIM_CCER_CC6E /*!< Timer output channel 6 */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup TIM_LL_EC_OCSTATE Output Configuration State
+ * @{
+ */
+#define LL_TIM_OCSTATE_DISABLE 0x00000000U /*!< OCx is not active */
+#define LL_TIM_OCSTATE_ENABLE TIM_CCER_CC1E /*!< OCx signal is output on the corresponding output pin */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/** Legacy definitions for compatibility purpose
+@cond 0
+ */
+#define LL_TIM_OCMODE_ASSYMETRIC_PWM1 LL_TIM_OCMODE_ASYMMETRIC_PWM1
+#define LL_TIM_OCMODE_ASSYMETRIC_PWM2 LL_TIM_OCMODE_ASYMMETRIC_PWM2
+/**
+@endcond
+ */
+
+/** @defgroup TIM_LL_EC_OCMODE Output Configuration Mode
+ * @{
+ */
+#define LL_TIM_OCMODE_FROZEN 0x00000000U /*!<The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the output channel level */
+#define LL_TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!<OCyREF is forced high on compare match*/
+#define LL_TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!<OCyREF is forced low on compare match*/
+#define LL_TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!<OCyREF toggles on compare match*/
+#define LL_TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!<OCyREF is forced low*/
+#define LL_TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!<OCyREF is forced high*/
+#define LL_TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!<In upcounting, channel y is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel y is inactive as long as TIMx_CNT>TIMx_CCRy else active.*/
+#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!<In upcounting, channel y is inactive as long as TIMx_CNT<TIMx_CCRy else active. In downcounting, channel y is active as long as TIMx_CNT>TIMx_CCRy else inactive*/
+#define LL_TIM_OCMODE_RETRIG_OPM1 TIM_CCMR1_OC1M_3 /*!<Retrigerrable OPM mode 1*/
+#define LL_TIM_OCMODE_RETRIG_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!<Retrigerrable OPM mode 2*/
+#define LL_TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!<Combined PWM mode 1*/
+#define LL_TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!<Combined PWM mode 2*/
+#define LL_TIM_OCMODE_ASYMMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!<Asymmetric PWM mode 1*/
+#define LL_TIM_OCMODE_ASYMMETRIC_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M) /*!<Asymmetric PWM mode 2*/
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity
+ * @{
+ */
+#define LL_TIM_OCPOLARITY_HIGH 0x00000000U /*!< OCxactive high*/
+#define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_OCIDLESTATE Output Configuration Idle State
+ * @{
+ */
+#define LL_TIM_OCIDLESTATE_LOW 0x00000000U /*!<OCx=0 (after a dead-time if OC is implemented) when MOE=0*/
+#define LL_TIM_OCIDLESTATE_HIGH TIM_CR2_OIS1 /*!<OCx=1 (after a dead-time if OC is implemented) when MOE=0*/
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_GROUPCH5 GROUPCH5
+ * @{
+ */
+#define LL_TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define LL_TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define LL_TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define LL_TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ACTIVEINPUT Active Input Selection
+ * @{
+ */
+#define LL_TIM_ACTIVEINPUT_DIRECTTI (TIM_CCMR1_CC1S_0 << 16U) /*!< ICx is mapped on TIx */
+#define LL_TIM_ACTIVEINPUT_INDIRECTTI (TIM_CCMR1_CC1S_1 << 16U) /*!< ICx is mapped on TIy */
+#define LL_TIM_ACTIVEINPUT_TRC (TIM_CCMR1_CC1S << 16U) /*!< ICx is mapped on TRC */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ICPSC Input Configuration Prescaler
+ * @{
+ */
+#define LL_TIM_ICPSC_DIV1 0x00000000U /*!< No prescaler, capture is done each time an edge is detected on the capture input */
+#define LL_TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0 << 16U) /*!< Capture is done once every 2 events */
+#define LL_TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1 << 16U) /*!< Capture is done once every 4 events */
+#define LL_TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC << 16U) /*!< Capture is done once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_IC_FILTER Input Configuration Filter
+ * @{
+ */
+#define LL_TIM_IC_FILTER_FDIV1 0x00000000U /*!< No filter, sampling is done at fDTS */
+#define LL_TIM_IC_FILTER_FDIV1_N2 (TIM_CCMR1_IC1F_0 << 16U) /*!< fSAMPLING=fCK_INT, N=2 */
+#define LL_TIM_IC_FILTER_FDIV1_N4 (TIM_CCMR1_IC1F_1 << 16U) /*!< fSAMPLING=fCK_INT, N=4 */
+#define LL_TIM_IC_FILTER_FDIV1_N8 ((TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fCK_INT, N=8 */
+#define LL_TIM_IC_FILTER_FDIV2_N6 (TIM_CCMR1_IC1F_2 << 16U) /*!< fSAMPLING=fDTS/2, N=6 */
+#define LL_TIM_IC_FILTER_FDIV2_N8 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/2, N=8 */
+#define LL_TIM_IC_FILTER_FDIV4_N6 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/4, N=6 */
+#define LL_TIM_IC_FILTER_FDIV4_N8 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/4, N=8 */
+#define LL_TIM_IC_FILTER_FDIV8_N6 (TIM_CCMR1_IC1F_3 << 16U) /*!< fSAMPLING=fDTS/8, N=6 */
+#define LL_TIM_IC_FILTER_FDIV8_N8 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/8, N=8 */
+#define LL_TIM_IC_FILTER_FDIV16_N5 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/16, N=5 */
+#define LL_TIM_IC_FILTER_FDIV16_N6 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/16, N=6 */
+#define LL_TIM_IC_FILTER_FDIV16_N8 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2) << 16U) /*!< fSAMPLING=fDTS/16, N=8 */
+#define LL_TIM_IC_FILTER_FDIV32_N5 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/32, N=5 */
+#define LL_TIM_IC_FILTER_FDIV32_N6 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/32, N=6 */
+#define LL_TIM_IC_FILTER_FDIV32_N8 (TIM_CCMR1_IC1F << 16U) /*!< fSAMPLING=fDTS/32, N=8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_IC_POLARITY Input Configuration Polarity
+ * @{
+ */
+#define LL_TIM_IC_POLARITY_RISING 0x00000000U /*!< The circuit is sensitive to TIxFP1 rising edge, TIxFP1 is not inverted */
+#define LL_TIM_IC_POLARITY_FALLING TIM_CCER_CC1P /*!< The circuit is sensitive to TIxFP1 falling edge, TIxFP1 is inverted */
+#define LL_TIM_IC_POLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< The circuit is sensitive to both TIxFP1 rising and falling edges, TIxFP1 is not inverted */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_CLOCKSOURCE Clock Source
+ * @{
+ */
+#define LL_TIM_CLOCKSOURCE_INTERNAL 0x00000000U /*!< The timer is clocked by the internal clock provided from the RCC */
+#define LL_TIM_CLOCKSOURCE_EXT_MODE1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Counter counts at each rising or falling edge on a selected input*/
+#define LL_TIM_CLOCKSOURCE_EXT_MODE2 TIM_SMCR_ECE /*!< Counter counts at each rising or falling edge on the external trigger input ETR */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ENCODERMODE Encoder Mode
+ * @{
+ */
+#define LL_TIM_ENCODERMODE_X2_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode - Counter counts up/down on TI1FP1 edge depending on TI2FP2 level */
+#define LL_TIM_ENCODERMODE_X2_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode - Counter counts up/down on TI2FP2 edge depending on TI1FP1 level */
+#define LL_TIM_ENCODERMODE_X4_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TRGO Trigger Output
+ * @{
+ */
+#define LL_TIM_TRGO_RESET 0x00000000U /*!< UG bit from the TIMx_EGR register is used as trigger output */
+#define LL_TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< Counter Enable signal (CNT_EN) is used as trigger output */
+#define LL_TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output */
+#define LL_TIM_TRGO_CC1IF (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< CC1 capture or a compare match is used as trigger output */
+#define LL_TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output */
+#define LL_TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output */
+#define LL_TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output */
+#define LL_TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TRGO2 Trigger Output 2
+ * @{
+ */
+#define LL_TIM_TRGO2_RESET 0x00000000U /*!< UG bit from the TIMx_EGR register is used as trigger output 2 */
+#define LL_TIM_TRGO2_ENABLE TIM_CR2_MMS2_0 /*!< Counter Enable signal (CNT_EN) is used as trigger output 2 */
+#define LL_TIM_TRGO2_UPDATE TIM_CR2_MMS2_1 /*!< Update event is used as trigger output 2 */
+#define LL_TIM_TRGO2_CC1F (TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< CC1 capture or a compare match is used as trigger output 2 */
+#define LL_TIM_TRGO2_OC1 TIM_CR2_MMS2_2 /*!< OC1REF signal is used as trigger output 2 */
+#define LL_TIM_TRGO2_OC2 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC2REF signal is used as trigger output 2 */
+#define LL_TIM_TRGO2_OC3 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1) /*!< OC3REF signal is used as trigger output 2 */
+#define LL_TIM_TRGO2_OC4 (TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC4REF signal is used as trigger output 2 */
+#define LL_TIM_TRGO2_OC5 TIM_CR2_MMS2_3 /*!< OC5REF signal is used as trigger output 2 */
+#define LL_TIM_TRGO2_OC6 (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0) /*!< OC6REF signal is used as trigger output 2 */
+#define LL_TIM_TRGO2_OC4_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1) /*!< OC4REF rising or falling edges are used as trigger output 2 */
+#define LL_TIM_TRGO2_OC6_RISINGFALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC6REF rising or falling edges are used as trigger output 2 */
+#define LL_TIM_TRGO2_OC4_RISING_OC6_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2) /*!< OC4REF or OC6REF rising edges are used as trigger output 2 */
+#define LL_TIM_TRGO2_OC4_RISING_OC6_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0) /*!< OC4REF rising or OC6REF falling edges are used as trigger output 2 */
+#define LL_TIM_TRGO2_OC5_RISING_OC6_RISING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1) /*!< OC5REF or OC6REF rising edges are used as trigger output 2 */
+#define LL_TIM_TRGO2_OC5_RISING_OC6_FALLING (TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0) /*!< OC5REF rising or OC6REF falling edges are used as trigger output 2 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_SLAVEMODE Slave Mode
+ * @{
+ */
+#define LL_TIM_SLAVEMODE_DISABLED 0x00000000U /*!< Slave mode disabled */
+#define LL_TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter */
+#define LL_TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high */
+#define LL_TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode - The counter starts at a rising edge of the trigger TRGI */
+#define LL_TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter, generates an update of the registers and starts the counter */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TS Trigger Selection
+ * @{
+ */
+#define LL_TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) is used as trigger input */
+#define LL_TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) is used as trigger input */
+#define LL_TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) is used as trigger input */
+#define LL_TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) is used as trigger input */
+#define LL_TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) is used as trigger input */
+#define LL_TIM_TS_TI1FP1 (TIM_SMCR_TS_2 | TIM_SMCR_TS_0) /*!< Filtered Timer Input 1 (TI1FP1) is used as trigger input */
+#define LL_TIM_TS_TI2FP2 (TIM_SMCR_TS_2 | TIM_SMCR_TS_1) /*!< Filtered Timer Input 2 (TI12P2) is used as trigger input */
+#define LL_TIM_TS_ETRF (TIM_SMCR_TS_2 | TIM_SMCR_TS_1 | TIM_SMCR_TS_0) /*!< Filtered external Trigger (ETRF) is used as trigger input */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ETR_POLARITY External Trigger Polarity
+ * @{
+ */
+#define LL_TIM_ETR_POLARITY_NONINVERTED 0x00000000U /*!< ETR is non-inverted, active at high level or rising edge */
+#define LL_TIM_ETR_POLARITY_INVERTED TIM_SMCR_ETP /*!< ETR is inverted, active at low level or falling edge */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ETR_PRESCALER External Trigger Prescaler
+ * @{
+ */
+#define LL_TIM_ETR_PRESCALER_DIV1 0x00000000U /*!< ETR prescaler OFF */
+#define LL_TIM_ETR_PRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR frequency is divided by 2 */
+#define LL_TIM_ETR_PRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR frequency is divided by 4 */
+#define LL_TIM_ETR_PRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR frequency is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ETR_FILTER External Trigger Filter
+ * @{
+ */
+#define LL_TIM_ETR_FILTER_FDIV1 0x00000000U /*!< No filter, sampling is done at fDTS */
+#define LL_TIM_ETR_FILTER_FDIV1_N2 TIM_SMCR_ETF_0 /*!< fSAMPLING=fCK_INT, N=2 */
+#define LL_TIM_ETR_FILTER_FDIV1_N4 TIM_SMCR_ETF_1 /*!< fSAMPLING=fCK_INT, N=4 */
+#define LL_TIM_ETR_FILTER_FDIV1_N8 (TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fCK_INT, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV2_N6 TIM_SMCR_ETF_2 /*!< fSAMPLING=fDTS/2, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV2_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/2, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV4_N6 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/4, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV4_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/4, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV8_N6 TIM_SMCR_ETF_3 /*!< fSAMPLING=fDTS/8, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV8_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV16_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/16, N=5 */
+#define LL_TIM_ETR_FILTER_FDIV16_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV16_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2) /*!< fSAMPLING=fDTS/16, N=8 */
+#define LL_TIM_ETR_FILTER_FDIV32_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/32, N=5 */
+#define LL_TIM_ETR_FILTER_FDIV32_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/32, N=6 */
+#define LL_TIM_ETR_FILTER_FDIV32_N8 TIM_SMCR_ETF /*!< fSAMPLING=fDTS/32, N=8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_ETRSOURCE External Trigger Source
+ * @{
+ */
+#define LL_TIM_ETRSOURCE_LEGACY 0x00000000U /*!< ETR legacy mode */
+#define LL_TIM_ETRSOURCE_COMP1 TIM1_OR2_ETRSEL_0 /*!< COMP1 output connected to ETR input */
+#define LL_TIM_ETRSOURCE_COMP2 TIM1_OR2_ETRSEL_1 /*!< COMP2 output connected to ETR input */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_BREAK_POLARITY break polarity
+ * @{
+ */
+#define LL_TIM_BREAK_POLARITY_LOW 0x00000000U /*!< Break input BRK is active low */
+#define LL_TIM_BREAK_POLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_BREAK_FILTER break filter
+ * @{
+ */
+#define LL_TIM_BREAK_FILTER_FDIV1 0x00000000U /*!< No filter, BRK acts asynchronously */
+#define LL_TIM_BREAK_FILTER_FDIV1_N2 0x00010000U /*!< fSAMPLING=fCK_INT, N=2 */
+#define LL_TIM_BREAK_FILTER_FDIV1_N4 0x00020000U /*!< fSAMPLING=fCK_INT, N=4 */
+#define LL_TIM_BREAK_FILTER_FDIV1_N8 0x00030000U /*!< fSAMPLING=fCK_INT, N=8 */
+#define LL_TIM_BREAK_FILTER_FDIV2_N6 0x00040000U /*!< fSAMPLING=fDTS/2, N=6 */
+#define LL_TIM_BREAK_FILTER_FDIV2_N8 0x00050000U /*!< fSAMPLING=fDTS/2, N=8 */
+#define LL_TIM_BREAK_FILTER_FDIV4_N6 0x00060000U /*!< fSAMPLING=fDTS/4, N=6 */
+#define LL_TIM_BREAK_FILTER_FDIV4_N8 0x00070000U /*!< fSAMPLING=fDTS/4, N=8 */
+#define LL_TIM_BREAK_FILTER_FDIV8_N6 0x00080000U /*!< fSAMPLING=fDTS/8, N=6 */
+#define LL_TIM_BREAK_FILTER_FDIV8_N8 0x00090000U /*!< fSAMPLING=fDTS/8, N=8 */
+#define LL_TIM_BREAK_FILTER_FDIV16_N5 0x000A0000U /*!< fSAMPLING=fDTS/16, N=5 */
+#define LL_TIM_BREAK_FILTER_FDIV16_N6 0x000B0000U /*!< fSAMPLING=fDTS/16, N=6 */
+#define LL_TIM_BREAK_FILTER_FDIV16_N8 0x000C0000U /*!< fSAMPLING=fDTS/16, N=8 */
+#define LL_TIM_BREAK_FILTER_FDIV32_N5 0x000D0000U /*!< fSAMPLING=fDTS/32, N=5 */
+#define LL_TIM_BREAK_FILTER_FDIV32_N6 0x000E0000U /*!< fSAMPLING=fDTS/32, N=6 */
+#define LL_TIM_BREAK_FILTER_FDIV32_N8 0x000F0000U /*!< fSAMPLING=fDTS/32, N=8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_BREAK2_POLARITY BREAK2 POLARITY
+ * @{
+ */
+#define LL_TIM_BREAK2_POLARITY_LOW 0x00000000U /*!< Break input BRK2 is active low */
+#define LL_TIM_BREAK2_POLARITY_HIGH TIM_BDTR_BK2P /*!< Break input BRK2 is active high */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_BREAK2_FILTER BREAK2 FILTER
+ * @{
+ */
+#define LL_TIM_BREAK2_FILTER_FDIV1 0x00000000U /*!< No filter, BRK acts asynchronously */
+#define LL_TIM_BREAK2_FILTER_FDIV1_N2 0x00100000U /*!< fSAMPLING=fCK_INT, N=2 */
+#define LL_TIM_BREAK2_FILTER_FDIV1_N4 0x00200000U /*!< fSAMPLING=fCK_INT, N=4 */
+#define LL_TIM_BREAK2_FILTER_FDIV1_N8 0x00300000U /*!< fSAMPLING=fCK_INT, N=8 */
+#define LL_TIM_BREAK2_FILTER_FDIV2_N6 0x00400000U /*!< fSAMPLING=fDTS/2, N=6 */
+#define LL_TIM_BREAK2_FILTER_FDIV2_N8 0x00500000U /*!< fSAMPLING=fDTS/2, N=8 */
+#define LL_TIM_BREAK2_FILTER_FDIV4_N6 0x00600000U /*!< fSAMPLING=fDTS/4, N=6 */
+#define LL_TIM_BREAK2_FILTER_FDIV4_N8 0x00700000U /*!< fSAMPLING=fDTS/4, N=8 */
+#define LL_TIM_BREAK2_FILTER_FDIV8_N6 0x00800000U /*!< fSAMPLING=fDTS/8, N=6 */
+#define LL_TIM_BREAK2_FILTER_FDIV8_N8 0x00900000U /*!< fSAMPLING=fDTS/8, N=8 */
+#define LL_TIM_BREAK2_FILTER_FDIV16_N5 0x00A00000U /*!< fSAMPLING=fDTS/16, N=5 */
+#define LL_TIM_BREAK2_FILTER_FDIV16_N6 0x00B00000U /*!< fSAMPLING=fDTS/16, N=6 */
+#define LL_TIM_BREAK2_FILTER_FDIV16_N8 0x00C00000U /*!< fSAMPLING=fDTS/16, N=8 */
+#define LL_TIM_BREAK2_FILTER_FDIV32_N5 0x00D00000U /*!< fSAMPLING=fDTS/32, N=5 */
+#define LL_TIM_BREAK2_FILTER_FDIV32_N6 0x00E00000U /*!< fSAMPLING=fDTS/32, N=6 */
+#define LL_TIM_BREAK2_FILTER_FDIV32_N8 0x00F00000U /*!< fSAMPLING=fDTS/32, N=8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_OSSI OSSI
+ * @{
+ */
+#define LL_TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OCx/OCxN outputs are disabled */
+#define LL_TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OxC/OCxN outputs are first forced with their inactive level then forced to their idle level after the deadtime */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_OSSR OSSR
+ * @{
+ */
+#define LL_TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OCx/OCxN outputs are disabled */
+#define LL_TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled with their inactive level as soon as CCxE=1 or CCxNE=1 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_BREAK_INPUT BREAK INPUT
+ * @{
+ */
+#define LL_TIM_BREAK_INPUT_BKIN 0x00000000U /*!< TIMx_BKIN input */
+#define LL_TIM_BREAK_INPUT_BKIN2 0x00000004U /*!< TIMx_BKIN2 input */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_BKIN_SOURCE BKIN SOURCE
+ * @{
+ */
+#define LL_TIM_BKIN_SOURCE_BKIN TIM1_OR2_BKINE /*!< BKIN input from AF controller */
+#define LL_TIM_BKIN_SOURCE_BKCOMP1 TIM1_OR2_BKCMP1E /*!< internal signal: COMP1 output */
+#define LL_TIM_BKIN_SOURCE_BKCOMP2 TIM1_OR2_BKCMP2E /*!< internal signal: COMP2 output */
+#if defined(DFSDM1_Channel0)
+#define LL_TIM_BKIN_SOURCE_DF1BK TIM1_OR2_BKDF1BK0E /*!< internal signal: DFSDM1 break output */
+#endif /* DFSDM1_Channel0 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_BKIN_POLARITY BKIN POLARITY
+ * @{
+ */
+#define LL_TIM_BKIN_POLARITY_LOW TIM1_OR2_BKINP /*!< BRK BKIN input is active low */
+#define LL_TIM_BKIN_POLARITY_HIGH 0x00000000U /*!< BRK BKIN input is active high */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_DMABURST_BASEADDR DMA Burst Base Address
+ * @{
+ */
+#define LL_TIM_DMABURST_BASEADDR_CR1 0x00000000U /*!< TIMx_CR1 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CR2 TIM_DCR_DBA_0 /*!< TIMx_CR2 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_SMCR TIM_DCR_DBA_1 /*!< TIMx_SMCR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_DIER (TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_DIER register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_SR TIM_DCR_DBA_2 /*!< TIMx_SR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_EGR (TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_EGR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCMR1 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCMR1 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCMR2 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCMR2 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCER TIM_DCR_DBA_3 /*!< TIMx_CCER register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CNT (TIM_DCR_DBA_3 | TIM_DCR_DBA_0) /*!< TIMx_CNT register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_PSC (TIM_DCR_DBA_3 | TIM_DCR_DBA_1) /*!< TIMx_PSC register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_ARR (TIM_DCR_DBA_3 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_ARR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_RCR (TIM_DCR_DBA_3 | TIM_DCR_DBA_2) /*!< TIMx_RCR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCR1 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_CCR1 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCR2 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCR2 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCR3 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCR3 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCR4 TIM_DCR_DBA_4 /*!< TIMx_CCR4 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_BDTR (TIM_DCR_DBA_4 | TIM_DCR_DBA_0) /*!< TIMx_BDTR register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_OR1 (TIM_DCR_DBA_4 | TIM_DCR_DBA_2) /*!< TIMx_OR1 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCMR3 (TIM_DCR_DBA_4 | TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_CCMR3 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCR5 (TIM_DCR_DBA_4 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCR5 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_CCR6 (TIM_DCR_DBA_4 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCR6 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_OR2 (TIM_DCR_DBA_4 | TIM_DCR_DBA_3) /*!< TIMx_OR2 register is the DMA base address for DMA burst */
+#define LL_TIM_DMABURST_BASEADDR_OR3 (TIM_DCR_DBA_4 | TIM_DCR_DBA_3 | TIM_DCR_DBA_0) /*!< TIMx_OR3 register is the DMA base address for DMA burst */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_DMABURST_LENGTH DMA Burst Length
+ * @{
+ */
+#define LL_TIM_DMABURST_LENGTH_1TRANSFER 0x00000000U /*!< Transfer is done to 1 register starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_2TRANSFERS TIM_DCR_DBL_0 /*!< Transfer is done to 2 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_3TRANSFERS TIM_DCR_DBL_1 /*!< Transfer is done to 3 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_4TRANSFERS (TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 4 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_5TRANSFERS TIM_DCR_DBL_2 /*!< Transfer is done to 5 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_6TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 6 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_7TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 7 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_8TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 1 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_9TRANSFERS TIM_DCR_DBL_3 /*!< Transfer is done to 9 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_10TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_0) /*!< Transfer is done to 10 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_11TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1) /*!< Transfer is done to 11 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_12TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 12 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_13TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2) /*!< Transfer is done to 13 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_14TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 14 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_15TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 15 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_16TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 16 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_17TRANSFERS TIM_DCR_DBL_4 /*!< Transfer is done to 17 registers starting from the DMA burst base address */
+#define LL_TIM_DMABURST_LENGTH_18TRANSFERS (TIM_DCR_DBL_4 | TIM_DCR_DBL_0) /*!< Transfer is done to 18 registers starting from the DMA burst base address */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TIM1_ETR_ADC1_RMP TIM1 External Trigger ADC1 Remap
+ * @{
+ */
+#define LL_TIM_TIM1_ETR_ADC1_RMP_NC TIM1_OR1_RMP_MASK /*!< TIM1_ETR is not connected to ADC1 analog watchdog x */
+#define LL_TIM_TIM1_ETR_ADC1_RMP_AWD1 (TIM1_OR1_ETR_ADC1_RMP_0 | TIM1_OR1_RMP_MASK) /*!< TIM1_ETR is connected to ADC1 analog watchdog 1 */
+#define LL_TIM_TIM1_ETR_ADC1_RMP_AWD2 (TIM1_OR1_ETR_ADC1_RMP_1 | TIM1_OR1_RMP_MASK) /*!< TIM1_ETR is connected to ADC1 analog watchdog 2 */
+#define LL_TIM_TIM1_ETR_ADC1_RMP_AWD3 (TIM1_OR1_ETR_ADC1_RMP | TIM1_OR1_RMP_MASK) /*!< TIM1_ETR is connected to ADC1 analog watchdog 3 */
+/**
+ * @}
+ */
+
+#if defined(ADC3)
+/** @defgroup TIM_LL_EC_TIM1_ETR_ADC3_RMP TIM1 External Trigger ADC3 Remap
+ * @{
+ */
+#define LL_TIM_TIM1_ETR_ADC3_RMP_NC TIM1_OR1_RMP_MASK /*!< TIM1_ETR is not connected to ADC3 analog watchdog x*/
+#define LL_TIM_TIM1_ETR_ADC3_RMP_AWD1 (TIM1_OR1_ETR_ADC3_RMP_0 | TIM1_OR1_RMP_MASK) /*!< TIM1_ETR is connected to ADC3 analog watchdog 1 */
+#define LL_TIM_TIM1_ETR_ADC3_RMP_AWD2 (TIM1_OR1_ETR_ADC3_RMP_1 | TIM1_OR1_RMP_MASK) /*!< TIM1_ETR is connected to ADC3 analog watchdog 2 */
+#define LL_TIM_TIM1_ETR_ADC3_RMP_AWD3 (TIM1_OR1_ETR_ADC3_RMP | TIM1_OR1_RMP_MASK) /*!< TIM1_ETR is connected to ADC3 analog watchdog 3 */
+/**
+ * @}
+ */
+#endif /* ADC3 */
+
+/** @defgroup TIM_LL_EC_TIM1_TI1_RMP TIM1 External Input Ch1 Remap
+ * @{
+ */
+#define LL_TIM_TIM1_TI1_RMP_GPIO TIM1_OR1_RMP_MASK /*!< TIM1 input capture 1 is connected to GPIO */
+#define LL_TIM_TIM1_TI1_RMP_COMP1 (TIM1_OR1_TI1_RMP | TIM1_OR1_RMP_MASK) /*!< TIM1 input capture 1 is connected to COMP1 output */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TIM2_ITR1_RMP TIM2 Internal Trigger1 Remap
+ * @{
+ */
+#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined(STM32L4S9xx)
+#define LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO TIM2_OR1_RMP_MASK /*!< TIM2_ITR1 is connected to TIM8_TRGO */
+#define LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF (TIM2_OR1_ITR1_RMP | TIM2_OR1_RMP_MASK) /*!< TIM2_ITR1 is connected to OTG_FS SOF */
+#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || */
+/* STM32L496xx || STM32L4A6xx || */
+/* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+#if defined (STM32L412xx) || defined (STM32L422xx) ||defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx)
+#define LL_TIM_TIM2_ITR1_RMP_NONE 0x00000000U /*!< No internal trigger on TIM2_ITR1 */
+#define LL_TIM_TIM2_ITR1_RMP_USB_SOF TIM2_OR1_ITR1_RMP /*!< TIM2_ITR1 is connected to USB SOF */
+#endif /* STM32L431xx || STM32L432xx || STM32L442xx || STM32L433xx || STM32L443xx || */
+/* STM32L451xx || STM32L452xx || STM32L462xx */
+#define LL_TIM_TIM2_ETR_RMP_GPIO TIM2_OR1_RMP_MASK /*!< TIM2_ETR is connected to GPIO */
+#define LL_TIM_TIM2_ETR_RMP_LSE (TIM2_OR1_ETR1_RMP | TIM2_OR1_RMP_MASK) /*!< TIM2_ETR is connected to LSE */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TIM2_TI4_RMP TIM2 External Input Ch4 Remap
+ * @{
+ */
+#define LL_TIM_TIM2_TI4_RMP_GPIO TIM2_OR1_RMP_MASK /*!< TIM2 input capture 4 is connected to GPIO */
+#define LL_TIM_TIM2_TI4_RMP_COMP1 (TIM2_OR1_TI4_RMP_0 | TIM2_OR1_RMP_MASK) /*!< TIM2 input capture 4 is connected to COMP1_OUT */
+#if defined (STM32L412xx) || defined (STM32L422xx)
+#else
+#define LL_TIM_TIM2_TI4_RMP_COMP2 (TIM2_OR1_TI4_RMP_1 | TIM2_OR1_RMP_MASK) /*!< TIM2 input capture 4 is connected to COMP2_OUT */
+#define LL_TIM_TIM2_TI4_RMP_COMP1_COMP2 (TIM2_OR1_TI4_RMP | TIM2_OR1_RMP_MASK) /*!< TIM2 input capture 4 is connected to logical OR between COMP1_OUT and COMP2_OUT */
+#endif
+/**
+ * @}
+ */
+
+#if defined(TIM3)
+/** @defgroup TIM_LL_EC_TIM3_TI1_RMP TIM3 External Input Ch1 Remap
+ * @{
+ */
+#define LL_TIM_TIM3_TI1_RMP_GPIO TIM3_OR1_RMP_MASK /*!< TIM3 input capture 1 is connected to GPIO */
+#define LL_TIM_TIM3_TI1_RMP_COMP1 (TIM3_OR1_TI1_RMP_0 | TIM3_OR1_RMP_MASK) /*!< TIM3 input capture 1 is connected to COMP1_OUT */
+#define LL_TIM_TIM3_TI1_RMP_COMP2 (TIM3_OR1_TI1_RMP_1 | TIM3_OR1_RMP_MASK) /*!< TIM3 input capture 1 is connected to COMP2_OUT */
+#define LL_TIM_TIM3_TI1_RMP_COMP1_COMP2 (TIM3_OR1_TI1_RMP | TIM3_OR1_RMP_MASK) /*!< TIM3 input capture 1 is connected to logical OR between COMP1_OUT and COMP2_OUT */
+/**
+ * @}
+ */
+#endif /* TIM3 */
+
+#if defined(TIM8)
+/** @defgroup TIM_LL_EC_TIM8_ETR_ADC2_RMP TIM8 External Trigger ADC2 Remap
+ * @{
+ */
+#define LL_TIM_TIM8_ETR_ADC2_RMP_NC TIM8_OR1_RMP_MASK /*!< TIM8_ETR is not connected to ADC2 analog watchdog x */
+#define LL_TIM_TIM8_ETR_ADC2_RMP_AWD1 (TIM8_OR1_ETR_ADC2_RMP_0 | TIM8_OR1_RMP_MASK) /*!< TIM8_ETR is connected to ADC2 analog watchdog */
+#define LL_TIM_TIM8_ETR_ADC2_RMP_AWD2 (TIM8_OR1_ETR_ADC2_RMP_1 | TIM8_OR1_RMP_MASK) /*!< TIM8_ETR is connected to ADC2 analog watchdog 2 */
+#define LL_TIM_TIM8_ETR_ADC2_RMP_AWD3 (TIM8_OR1_ETR_ADC2_RMP | TIM8_OR1_RMP_MASK) /*!< TIM8_ETR is connected to ADC2 analog watchdog 3 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TIM8_ETR_ADC3_RMP TIM8 External Trigger ADC3 Remap
+ * @{
+ */
+#define LL_TIM_TIM8_ETR_ADC3_RMP_NC TIM8_OR1_RMP_MASK /*!< TIM8_ETR is not connected to ADC3 analog watchdog x */
+#define LL_TIM_TIM8_ETR_ADC3_RMP_AWD1 (TIM8_OR1_ETR_ADC3_RMP_0 | TIM8_OR1_RMP_MASK) /*!< TIM8_ETR is connected to ADC3 analog watchdog 1 */
+#define LL_TIM_TIM8_ETR_ADC3_RMP_AWD2 (TIM8_OR1_ETR_ADC3_RMP_1 | TIM8_OR1_RMP_MASK) /*!< TIM8_ETR is connected to ADC3 analog watchdog 2 */
+#define LL_TIM_TIM8_ETR_ADC3_RMP_AWD3 (TIM8_OR1_ETR_ADC3_RMP | TIM8_OR1_RMP_MASK) /*!< TIM8_ETR is connected to ADC3 analog watchdog 3 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TIM8_TI1_RMP TIM8 External Input Ch1 Remap
+ * @{
+ */
+#define LL_TIM_TIM8_TI1_RMP_GPIO TIM8_OR1_RMP_MASK /*!< TIM8 input capture 1 is connected to GPIO */
+#define LL_TIM_TIM8_TI1_RMP_COMP2 (TIM8_OR1_TI1_RMP | TIM8_OR1_RMP_MASK) /*!< TIM8 input capture 1 is connected to COMP2 output */
+/**
+ * @}
+ */
+#endif /* TIM8 */
+
+/** @defgroup TIM_LL_EC_TIM15_TI1_RMP TIM15 External Input Ch1 Remap
+ * @{
+ */
+#define LL_TIM_TIM15_TI1_RMP_GPIO TIM15_OR1_RMP_MASK /*!< TIM15 input capture 1 is connected to GPIO */
+#define LL_TIM_TIM15_TI1_RMP_LSE (TIM15_OR1_TI1_RMP | TIM15_OR1_RMP_MASK) /*!< TIM15 input capture 1 is connected to LSE */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TIM15_ENCODERMODE TIM15 ENCODERMODE
+ * @{
+ */
+#define LL_TIM_TIM15_ENCODERMODE_NOREDIRECTION TIM15_OR1_RMP_MASK /*!< No redirection*/
+#define LL_TIM_TIM15_ENCODERMODE_TIM2 (TIM15_OR1_ENCODER_MODE_0 | TIM15_OR1_RMP_MASK) /*!< TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
+#define LL_TIM_TIM15_ENCODERMODE_TIM3 (TIM15_OR1_ENCODER_MODE_1 | TIM15_OR1_RMP_MASK) /*!< TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectivel y*/
+#define LL_TIM_TIM15_ENCODERMODE_TIM4 (TIM15_OR1_ENCODER_MODE | TIM15_OR1_RMP_MASK) /*!< TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EC_TIM16_TI1_RMP TIM16 External Input Ch1 Remap
+ * @{
+ */
+#define LL_TIM_TIM16_TI1_RMP_GPIO TIM16_OR1_RMP_MASK /*!< TIM16 input capture 1 is connected to GPIO */
+#define LL_TIM_TIM16_TI1_RMP_LSI (TIM16_OR1_TI1_RMP_0 | TIM16_OR1_RMP_MASK) /*!< TIM16 input capture 1 is connected to LSI */
+#define LL_TIM_TIM16_TI1_RMP_LSE (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_RMP_MASK) /*!< TIM16 input capture 1 is connected to LSE */
+#define LL_TIM_TIM16_TI1_RMP_RTC (TIM16_OR1_TI1_RMP_1 | TIM16_OR1_TI1_RMP_0 | TIM16_OR1_RMP_MASK) /*!< TIM16 input capture 1 is connected to RTC wakeup interrupt */
+#if defined TIM16_OR1_TI1_RMP_2
+#define LL_TIM_TIM16_TI1_RMP_MSI (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_RMP_MASK) /*!< TIM16 input capture 1 is connected to MSI */
+#define LL_TIM_TIM16_TI1_RMP_HSE_32 (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_0 | TIM16_OR1_RMP_MASK) /*!< TIM16 input capture 1 is connected to HSE/32 */
+#define LL_TIM_TIM16_TI1_RMP_MCO (TIM16_OR1_TI1_RMP_2 | TIM16_OR1_TI1_RMP_1 | TIM16_OR1_RMP_MASK) /*!< TIM16 input capture 1 is connected to MCO */
+#endif
+/**
+ * @}
+ */
+
+#if defined(TIM17)
+/** @defgroup TIM_LL_EC_TIM17_TI1_RMP TIM17 Timer Input Ch1 Remap
+ * @{
+ */
+#define LL_TIM_TIM17_TI1_RMP_GPIO TIM17_OR1_RMP_MASK /*!< TIM17 input capture 1 is connected to GPIO */
+#define LL_TIM_TIM17_TI1_RMP_MSI (TIM17_OR1_TI1_RMP_0 | TIM17_OR1_RMP_MASK) /*!< TIM17 input capture 1 is connected to MSI */
+#define LL_TIM_TIM17_TI1_RMP_HSE_32 (TIM17_OR1_TI1_RMP_1 | TIM17_OR1_RMP_MASK) /*!< TIM17 input capture 1 is connected to HSE/32 */
+#define LL_TIM_TIM17_TI1_RMP_MCO (TIM17_OR1_TI1_RMP | TIM17_OR1_RMP_MASK) /*!< TIM17 input capture 1 is connected to MCO */
+/**
+ * @}
+ */
+#endif /* TIM17 */
+
+/** @defgroup TIM_LL_EC_OCREF_CLR_INT OCREF clear input selection
+ * @{
+ */
+#define LL_TIM_OCREF_CLR_INT_NC 0x00000000U /*!< OCREF_CLR_INT is not connected */
+#define LL_TIM_OCREF_CLR_INT_ETR TIM_SMCR_OCCS /*!< OCREF_CLR_INT is connected to ETRF */
+/**
+ * @}
+ */
+
+/** Legacy definitions for compatibility purpose
+@cond 0
+ */
+#define LL_TIM_BKIN_SOURCE_DFBK LL_TIM_BKIN_SOURCE_DF1BK
+/**
+@endcond
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIM_LL_Exported_Macros TIM Exported Macros
+ * @{
+ */
+
+/** @defgroup TIM_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+/**
+ * @brief Write a value in TIM register.
+ * @param __INSTANCE__ TIM Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_TIM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in TIM register.
+ * @param __INSTANCE__ TIM Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @brief HELPER macro retrieving the UIFCPY flag from the counter value.
+ * @note ex: @ref __LL_TIM_GETFLAG_UIFCPY (@ref LL_TIM_GetCounter ());
+ * @note Relevant only if UIF flag remapping has been enabled (UIF status bit is copied
+ * to TIMx_CNT register bit 31)
+ * @param __CNT__ Counter value
+ * @retval UIF status bit
+ */
+#define __LL_TIM_GETFLAG_UIFCPY(__CNT__) \
+ (READ_BIT((__CNT__), TIM_CNT_UIFCPY) >> TIM_CNT_UIFCPY_Pos)
+
+/**
+ * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration.
+ * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120);
+ * @param __TIMCLK__ timer input clock frequency (in Hz)
+ * @param __CKD__ This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
+ * @param __DT__ deadtime duration (in ns)
+ * @retval DTG[0:7]
+ */
+#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \
+ ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \
+ (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \
+ (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\
+ (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \
+ (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\
+ (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \
+ (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\
+ 0U)
+
+/**
+ * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency.
+ * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000);
+ * @param __TIMCLK__ timer input clock frequency (in Hz)
+ * @param __CNTCLK__ counter clock frequency (in Hz)
+ * @retval Prescaler value (between Min_Data=0 and Max_Data=65535)
+ */
+#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \
+ (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((((__TIMCLK__) + (__CNTCLK__)/2U)/(__CNTCLK__)) - 1U) : 0U)
+
+/**
+ * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency.
+ * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000);
+ * @param __TIMCLK__ timer input clock frequency (in Hz)
+ * @param __PSC__ prescaler
+ * @param __FREQ__ output signal frequency (in Hz)
+ * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535)
+ */
+#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \
+ ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U)
+
+/**
+ * @brief HELPER macro calculating the compare value required to achieve the required timer output compare
+ * active/inactive delay.
+ * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10);
+ * @param __TIMCLK__ timer input clock frequency (in Hz)
+ * @param __PSC__ prescaler
+ * @param __DELAY__ timer output compare active/inactive delay (in us)
+ * @retval Compare value (between Min_Data=0 and Max_Data=65535)
+ */
+#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \
+ ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \
+ / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U))))
+
+/**
+ * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration
+ * (when the timer operates in one pulse mode).
+ * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20);
+ * @param __TIMCLK__ timer input clock frequency (in Hz)
+ * @param __PSC__ prescaler
+ * @param __DELAY__ timer output compare active/inactive delay (in us)
+ * @param __PULSE__ pulse duration (in us)
+ * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535)
+ */
+#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \
+ ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \
+ + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__))))
+
+/**
+ * @brief HELPER macro retrieving the ratio of the input capture prescaler
+ * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ());
+ * @param __ICPSC__ This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ICPSC_DIV1
+ * @arg @ref LL_TIM_ICPSC_DIV2
+ * @arg @ref LL_TIM_ICPSC_DIV4
+ * @arg @ref LL_TIM_ICPSC_DIV8
+ * @retval Input capture prescaler ratio (1, 2, 4 or 8)
+ */
+#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \
+ ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos)))
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIM_LL_EF_Time_Base Time Base configuration
+ * @{
+ */
+/**
+ * @brief Enable timer counter.
+ * @rmtoll CR1 CEN LL_TIM_EnableCounter
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR1, TIM_CR1_CEN);
+}
+
+/**
+ * @brief Disable timer counter.
+ * @rmtoll CR1 CEN LL_TIM_DisableCounter
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN);
+}
+
+/**
+ * @brief Indicates whether the timer counter is enabled.
+ * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable update event generation.
+ * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS);
+}
+
+/**
+ * @brief Disable update event generation.
+ * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR1, TIM_CR1_UDIS);
+}
+
+/**
+ * @brief Indicates whether update event generation is enabled.
+ * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent
+ * @param TIMx Timer instance
+ * @retval Inverted state of bit (0 or 1).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set update event source
+ * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events
+ * generate an update interrupt or DMA request if enabled:
+ * - Counter overflow/underflow
+ * - Setting the UG bit
+ * - Update generation through the slave mode controller
+ * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter
+ * overflow/underflow generates an update interrupt or DMA request if enabled.
+ * @rmtoll CR1 URS LL_TIM_SetUpdateSource
+ * @param TIMx Timer instance
+ * @param UpdateSource This parameter can be one of the following values:
+ * @arg @ref LL_TIM_UPDATESOURCE_REGULAR
+ * @arg @ref LL_TIM_UPDATESOURCE_COUNTER
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource)
+{
+ MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource);
+}
+
+/**
+ * @brief Get actual event update source
+ * @rmtoll CR1 URS LL_TIM_GetUpdateSource
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_UPDATESOURCE_REGULAR
+ * @arg @ref LL_TIM_UPDATESOURCE_COUNTER
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS));
+}
+
+/**
+ * @brief Set one pulse mode (one shot v.s. repetitive).
+ * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode
+ * @param TIMx Timer instance
+ * @param OnePulseMode This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE
+ * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode)
+{
+ MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode);
+}
+
+/**
+ * @brief Get actual one pulse mode.
+ * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE
+ * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM));
+}
+
+/**
+ * @brief Set the timer counter counting mode.
+ * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to
+ * check whether or not the counter mode selection feature is supported
+ * by a timer instance.
+ * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+ * requires a timer reset to avoid unexpected direction
+ * due to DIR bit readonly in center aligned mode.
+ * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n
+ * CR1 CMS LL_TIM_SetCounterMode
+ * @param TIMx Timer instance
+ * @param CounterMode This parameter can be one of the following values:
+ * @arg @ref LL_TIM_COUNTERMODE_UP
+ * @arg @ref LL_TIM_COUNTERMODE_DOWN
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode)
+{
+ MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode);
+}
+
+/**
+ * @brief Get actual counter mode.
+ * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to
+ * check whether or not the counter mode selection feature is supported
+ * by a timer instance.
+ * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n
+ * CR1 CMS LL_TIM_GetCounterMode
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_COUNTERMODE_UP
+ * @arg @ref LL_TIM_COUNTERMODE_DOWN
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN
+ * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(const TIM_TypeDef *TIMx)
+{
+ uint32_t counter_mode;
+
+ counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS));
+
+ if (counter_mode == 0U)
+ {
+ counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR));
+ }
+
+ return counter_mode;
+}
+
+/**
+ * @brief Enable auto-reload (ARR) preload.
+ * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR1, TIM_CR1_ARPE);
+}
+
+/**
+ * @brief Disable auto-reload (ARR) preload.
+ * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE);
+}
+
+/**
+ * @brief Indicates whether auto-reload (ARR) preload is enabled.
+ * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators
+ * (when supported) and the digital filters.
+ * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
+ * whether or not the clock division feature is supported by the timer
+ * instance.
+ * @rmtoll CR1 CKD LL_TIM_SetClockDivision
+ * @param TIMx Timer instance
+ * @param ClockDivision This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision)
+{
+ MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision);
+}
+
+/**
+ * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time
+ * generators (when supported) and the digital filters.
+ * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
+ * whether or not the clock division feature is supported by the timer
+ * instance.
+ * @rmtoll CR1 CKD LL_TIM_GetClockDivision
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV1
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV2
+ * @arg @ref LL_TIM_CLOCKDIVISION_DIV4
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD));
+}
+
+/**
+ * @brief Set the counter value.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @rmtoll CNT CNT LL_TIM_SetCounter
+ * @param TIMx Timer instance
+ * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF)
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter)
+{
+ WRITE_REG(TIMx->CNT, Counter);
+}
+
+/**
+ * @brief Get the counter value.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @rmtoll CNT CNT LL_TIM_GetCounter
+ * @param TIMx Timer instance
+ * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF)
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetCounter(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CNT));
+}
+
+/**
+ * @brief Get the current direction of the counter
+ * @rmtoll CR1 DIR LL_TIM_GetDirection
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_COUNTERDIRECTION_UP
+ * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetDirection(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR));
+}
+
+/**
+ * @brief Set the prescaler value.
+ * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1).
+ * @note The prescaler can be changed on the fly as this control register is buffered. The new
+ * prescaler ratio is taken into account at the next update event.
+ * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter
+ * @rmtoll PSC PSC LL_TIM_SetPrescaler
+ * @param TIMx Timer instance
+ * @param Prescaler between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler)
+{
+ WRITE_REG(TIMx->PSC, Prescaler);
+}
+
+/**
+ * @brief Get the prescaler value.
+ * @rmtoll PSC PSC LL_TIM_GetPrescaler
+ * @param TIMx Timer instance
+ * @retval Prescaler value between Min_Data=0 and Max_Data=65535
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->PSC));
+}
+
+/**
+ * @brief Set the auto-reload value.
+ * @note The counter is blocked while the auto-reload value is null.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter
+ * @rmtoll ARR ARR LL_TIM_SetAutoReload
+ * @param TIMx Timer instance
+ * @param AutoReload between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload)
+{
+ WRITE_REG(TIMx->ARR, AutoReload);
+}
+
+/**
+ * @brief Get the auto-reload value.
+ * @rmtoll ARR ARR LL_TIM_GetAutoReload
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @param TIMx Timer instance
+ * @retval Auto-reload value
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->ARR));
+}
+
+/**
+ * @brief Set the repetition counter value.
+ * @note For advanced timer instances RepetitionCounter can be up to 65535.
+ * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a repetition counter.
+ * @rmtoll RCR REP LL_TIM_SetRepetitionCounter
+ * @param TIMx Timer instance
+ * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer.
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter)
+{
+ WRITE_REG(TIMx->RCR, RepetitionCounter);
+}
+
+/**
+ * @brief Get the repetition counter value.
+ * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a repetition counter.
+ * @rmtoll RCR REP LL_TIM_GetRepetitionCounter
+ * @param TIMx Timer instance
+ * @retval Repetition counter value
+ */
+__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->RCR));
+}
+
+/**
+ * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31).
+ * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read
+ * in an atomic way.
+ * @rmtoll CR1 UIFREMAP LL_TIM_EnableUIFRemap
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableUIFRemap(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR1, TIM_CR1_UIFREMAP);
+}
+
+/**
+ * @brief Disable update interrupt flag (UIF) remapping.
+ * @rmtoll CR1 UIFREMAP LL_TIM_DisableUIFRemap
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableUIFRemap(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR1, TIM_CR1_UIFREMAP);
+}
+
+/**
+ * @brief Indicate whether update interrupt flag (UIF) copy is set.
+ * @param Counter Counter value
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveUIFCPY(const uint32_t Counter)
+{
+ return (((Counter & TIM_CNT_UIFCPY) == (TIM_CNT_UIFCPY)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration
+ * @{
+ */
+/**
+ * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload.
+ * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written,
+ * they are updated only when a commutation event (COM) occurs.
+ * @note Only on channels that have a complementary output.
+ * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance is able to generate a commutation event.
+ * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR2, TIM_CR2_CCPC);
+}
+
+/**
+ * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload.
+ * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance is able to generate a commutation event.
+ * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC);
+}
+
+/**
+ * @brief Indicates whether the capture/compare control bits (CCxE, CCxNE and OCxM) preload is enabled.
+ * @rmtoll CR2 CCPC LL_TIM_CC_IsEnabledPreload
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledPreload(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->CR2, TIM_CR2_CCPC) == (TIM_CR2_CCPC)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM).
+ * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance is able to generate a commutation event.
+ * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate
+ * @param TIMx Timer instance
+ * @param CCUpdateSource This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY
+ * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource)
+{
+ MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource);
+}
+
+/**
+ * @brief Set the trigger of the capture/compare DMA request.
+ * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger
+ * @param TIMx Timer instance
+ * @param DMAReqTrigger This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CCDMAREQUEST_CC
+ * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger)
+{
+ MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger);
+}
+
+/**
+ * @brief Get actual trigger of the capture/compare DMA request.
+ * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger
+ * @param TIMx Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_CCDMAREQUEST_CC
+ * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE
+ */
+__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS));
+}
+
+/**
+ * @brief Set the lock level to freeze the
+ * configuration of several capture/compare parameters.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * the lock mechanism is supported by a timer instance.
+ * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel
+ * @param TIMx Timer instance
+ * @param LockLevel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_LOCKLEVEL_OFF
+ * @arg @ref LL_TIM_LOCKLEVEL_1
+ * @arg @ref LL_TIM_LOCKLEVEL_2
+ * @arg @ref LL_TIM_LOCKLEVEL_3
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel)
+{
+ MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel);
+}
+
+/**
+ * @brief Enable capture/compare channels.
+ * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n
+ * CCER CC1NE LL_TIM_CC_EnableChannel\n
+ * CCER CC2E LL_TIM_CC_EnableChannel\n
+ * CCER CC2NE LL_TIM_CC_EnableChannel\n
+ * CCER CC3E LL_TIM_CC_EnableChannel\n
+ * CCER CC3NE LL_TIM_CC_EnableChannel\n
+ * CCER CC4E LL_TIM_CC_EnableChannel\n
+ * CCER CC5E LL_TIM_CC_EnableChannel\n
+ * CCER CC6E LL_TIM_CC_EnableChannel
+ * @param TIMx Timer instance
+ * @param Channels This parameter can be a combination of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels)
+{
+ SET_BIT(TIMx->CCER, Channels);
+}
+
+/**
+ * @brief Disable capture/compare channels.
+ * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n
+ * CCER CC1NE LL_TIM_CC_DisableChannel\n
+ * CCER CC2E LL_TIM_CC_DisableChannel\n
+ * CCER CC2NE LL_TIM_CC_DisableChannel\n
+ * CCER CC3E LL_TIM_CC_DisableChannel\n
+ * CCER CC3NE LL_TIM_CC_DisableChannel\n
+ * CCER CC4E LL_TIM_CC_DisableChannel\n
+ * CCER CC5E LL_TIM_CC_DisableChannel\n
+ * CCER CC6E LL_TIM_CC_DisableChannel
+ * @param TIMx Timer instance
+ * @param Channels This parameter can be a combination of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels)
+{
+ CLEAR_BIT(TIMx->CCER, Channels);
+}
+
+/**
+ * @brief Indicate whether channel(s) is(are) enabled.
+ * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC2E LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC3E LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC4E LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC5E LL_TIM_CC_IsEnabledChannel\n
+ * CCER CC6E LL_TIM_CC_IsEnabledChannel
+ * @param TIMx Timer instance
+ * @param Channels This parameter can be a combination of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(const TIM_TypeDef *TIMx, uint32_t Channels)
+{
+ return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration
+ * @{
+ */
+/**
+ * @brief Configure an output channel.
+ * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n
+ * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n
+ * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n
+ * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n
+ * CCMR3 CC5S LL_TIM_OC_ConfigOutput\n
+ * CCMR3 CC6S LL_TIM_OC_ConfigOutput\n
+ * CCER CC1P LL_TIM_OC_ConfigOutput\n
+ * CCER CC2P LL_TIM_OC_ConfigOutput\n
+ * CCER CC3P LL_TIM_OC_ConfigOutput\n
+ * CCER CC4P LL_TIM_OC_ConfigOutput\n
+ * CCER CC5P LL_TIM_OC_ConfigOutput\n
+ * CCER CC6P LL_TIM_OC_ConfigOutput\n
+ * CR2 OIS1 LL_TIM_OC_ConfigOutput\n
+ * CR2 OIS2 LL_TIM_OC_ConfigOutput\n
+ * CR2 OIS3 LL_TIM_OC_ConfigOutput\n
+ * CR2 OIS4 LL_TIM_OC_ConfigOutput\n
+ * CR2 OIS5 LL_TIM_OC_ConfigOutput\n
+ * CR2 OIS6 LL_TIM_OC_ConfigOutput
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @param Configuration This parameter must be a combination of all the following values:
+ * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW
+ * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel]));
+ MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]),
+ (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]);
+ MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]),
+ (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]);
+}
+
+/**
+ * @brief Define the behavior of the output reference signal OCxREF from which
+ * OCx and OCxN (when relevant) are derived.
+ * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n
+ * CCMR1 OC2M LL_TIM_OC_SetMode\n
+ * CCMR2 OC3M LL_TIM_OC_SetMode\n
+ * CCMR2 OC4M LL_TIM_OC_SetMode\n
+ * CCMR3 OC5M LL_TIM_OC_SetMode\n
+ * CCMR3 OC6M LL_TIM_OC_SetMode
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OCMODE_FROZEN
+ * @arg @ref LL_TIM_OCMODE_ACTIVE
+ * @arg @ref LL_TIM_OCMODE_INACTIVE
+ * @arg @ref LL_TIM_OCMODE_TOGGLE
+ * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE
+ * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE
+ * @arg @ref LL_TIM_OCMODE_PWM1
+ * @arg @ref LL_TIM_OCMODE_PWM2
+ * @arg @ref LL_TIM_OCMODE_RETRIG_OPM1
+ * @arg @ref LL_TIM_OCMODE_RETRIG_OPM2
+ * @arg @ref LL_TIM_OCMODE_COMBINED_PWM1
+ * @arg @ref LL_TIM_OCMODE_COMBINED_PWM2
+ * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM1
+ * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM2
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]);
+}
+
+/**
+ * @brief Get the output compare mode of an output channel.
+ * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n
+ * CCMR1 OC2M LL_TIM_OC_GetMode\n
+ * CCMR2 OC3M LL_TIM_OC_GetMode\n
+ * CCMR2 OC4M LL_TIM_OC_GetMode\n
+ * CCMR3 OC5M LL_TIM_OC_GetMode\n
+ * CCMR3 OC6M LL_TIM_OC_GetMode
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_OCMODE_FROZEN
+ * @arg @ref LL_TIM_OCMODE_ACTIVE
+ * @arg @ref LL_TIM_OCMODE_INACTIVE
+ * @arg @ref LL_TIM_OCMODE_TOGGLE
+ * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE
+ * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE
+ * @arg @ref LL_TIM_OCMODE_PWM1
+ * @arg @ref LL_TIM_OCMODE_PWM2
+ * @arg @ref LL_TIM_OCMODE_RETRIG_OPM1
+ * @arg @ref LL_TIM_OCMODE_RETRIG_OPM2
+ * @arg @ref LL_TIM_OCMODE_COMBINED_PWM1
+ * @arg @ref LL_TIM_OCMODE_COMBINED_PWM2
+ * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM1
+ * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM2
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(const TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]);
+}
+
+/**
+ * @brief Set the polarity of an output channel.
+ * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n
+ * CCER CC1NP LL_TIM_OC_SetPolarity\n
+ * CCER CC2P LL_TIM_OC_SetPolarity\n
+ * CCER CC2NP LL_TIM_OC_SetPolarity\n
+ * CCER CC3P LL_TIM_OC_SetPolarity\n
+ * CCER CC3NP LL_TIM_OC_SetPolarity\n
+ * CCER CC4P LL_TIM_OC_SetPolarity\n
+ * CCER CC5P LL_TIM_OC_SetPolarity\n
+ * CCER CC6P LL_TIM_OC_SetPolarity
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OCPOLARITY_HIGH
+ * @arg @ref LL_TIM_OCPOLARITY_LOW
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]);
+}
+
+/**
+ * @brief Get the polarity of an output channel.
+ * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n
+ * CCER CC1NP LL_TIM_OC_GetPolarity\n
+ * CCER CC2P LL_TIM_OC_GetPolarity\n
+ * CCER CC2NP LL_TIM_OC_GetPolarity\n
+ * CCER CC3P LL_TIM_OC_GetPolarity\n
+ * CCER CC3NP LL_TIM_OC_GetPolarity\n
+ * CCER CC4P LL_TIM_OC_GetPolarity\n
+ * CCER CC5P LL_TIM_OC_GetPolarity\n
+ * CCER CC6P LL_TIM_OC_GetPolarity
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_OCPOLARITY_HIGH
+ * @arg @ref LL_TIM_OCPOLARITY_LOW
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]);
+}
+
+/**
+ * @brief Set the IDLE state of an output channel
+ * @note This function is significant only for the timer instances
+ * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx)
+ * can be used to check whether or not a timer instance provides
+ * a break input.
+ * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n
+ * CR2 OIS2N LL_TIM_OC_SetIdleState\n
+ * CR2 OIS2 LL_TIM_OC_SetIdleState\n
+ * CR2 OIS2N LL_TIM_OC_SetIdleState\n
+ * CR2 OIS3 LL_TIM_OC_SetIdleState\n
+ * CR2 OIS3N LL_TIM_OC_SetIdleState\n
+ * CR2 OIS4 LL_TIM_OC_SetIdleState\n
+ * CR2 OIS5 LL_TIM_OC_SetIdleState\n
+ * CR2 OIS6 LL_TIM_OC_SetIdleState
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @param IdleState This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OCIDLESTATE_LOW
+ * @arg @ref LL_TIM_OCIDLESTATE_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]);
+}
+
+/**
+ * @brief Get the IDLE state of an output channel
+ * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n
+ * CR2 OIS2N LL_TIM_OC_GetIdleState\n
+ * CR2 OIS2 LL_TIM_OC_GetIdleState\n
+ * CR2 OIS2N LL_TIM_OC_GetIdleState\n
+ * CR2 OIS3 LL_TIM_OC_GetIdleState\n
+ * CR2 OIS3N LL_TIM_OC_GetIdleState\n
+ * CR2 OIS4 LL_TIM_OC_GetIdleState\n
+ * CR2 OIS5 LL_TIM_OC_GetIdleState\n
+ * CR2 OIS6 LL_TIM_OC_GetIdleState
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH1N
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH2N
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH3N
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_OCIDLESTATE_LOW
+ * @arg @ref LL_TIM_OCIDLESTATE_HIGH
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(const TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]);
+}
+
+/**
+ * @brief Enable fast mode for the output channel.
+ * @note Acts only if the channel is configured in PWM1 or PWM2 mode.
+ * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n
+ * CCMR1 OC2FE LL_TIM_OC_EnableFast\n
+ * CCMR2 OC3FE LL_TIM_OC_EnableFast\n
+ * CCMR2 OC4FE LL_TIM_OC_EnableFast\n
+ * CCMR3 OC5FE LL_TIM_OC_EnableFast\n
+ * CCMR3 OC6FE LL_TIM_OC_EnableFast
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]));
+
+}
+
+/**
+ * @brief Disable fast mode for the output channel.
+ * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n
+ * CCMR1 OC2FE LL_TIM_OC_DisableFast\n
+ * CCMR2 OC3FE LL_TIM_OC_DisableFast\n
+ * CCMR2 OC4FE LL_TIM_OC_DisableFast\n
+ * CCMR3 OC5FE LL_TIM_OC_DisableFast\n
+ * CCMR3 OC6FE LL_TIM_OC_DisableFast
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]));
+
+}
+
+/**
+ * @brief Indicates whether fast mode is enabled for the output channel.
+ * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n
+ * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n
+ * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n
+ * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n
+ * CCMR3 OC5FE LL_TIM_OC_IsEnabledFast\n
+ * CCMR3 OC6FE LL_TIM_OC_IsEnabledFast
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(const TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel];
+ return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable compare register (TIMx_CCRx) preload for the output channel.
+ * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n
+ * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n
+ * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n
+ * CCMR2 OC4PE LL_TIM_OC_EnablePreload\n
+ * CCMR3 OC5PE LL_TIM_OC_EnablePreload\n
+ * CCMR3 OC6PE LL_TIM_OC_EnablePreload
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]));
+}
+
+/**
+ * @brief Disable compare register (TIMx_CCRx) preload for the output channel.
+ * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n
+ * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n
+ * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n
+ * CCMR2 OC4PE LL_TIM_OC_DisablePreload\n
+ * CCMR3 OC5PE LL_TIM_OC_DisablePreload\n
+ * CCMR3 OC6PE LL_TIM_OC_DisablePreload
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]));
+}
+
+/**
+ * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel.
+ * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n
+ * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n
+ * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n
+ * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n
+ * CCMR3 OC5PE LL_TIM_OC_IsEnabledPreload\n
+ * CCMR3 OC6PE LL_TIM_OC_IsEnabledPreload
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(const TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel];
+ return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable clearing the output channel on an external event.
+ * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode.
+ * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether
+ * or not a timer instance can clear the OCxREF signal on an external event.
+ * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n
+ * CCMR1 OC2CE LL_TIM_OC_EnableClear\n
+ * CCMR2 OC3CE LL_TIM_OC_EnableClear\n
+ * CCMR2 OC4CE LL_TIM_OC_EnableClear\n
+ * CCMR3 OC5CE LL_TIM_OC_EnableClear\n
+ * CCMR3 OC6CE LL_TIM_OC_EnableClear
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]));
+}
+
+/**
+ * @brief Disable clearing the output channel on an external event.
+ * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether
+ * or not a timer instance can clear the OCxREF signal on an external event.
+ * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n
+ * CCMR1 OC2CE LL_TIM_OC_DisableClear\n
+ * CCMR2 OC3CE LL_TIM_OC_DisableClear\n
+ * CCMR2 OC4CE LL_TIM_OC_DisableClear\n
+ * CCMR3 OC5CE LL_TIM_OC_DisableClear\n
+ * CCMR3 OC6CE LL_TIM_OC_DisableClear
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]));
+}
+
+/**
+ * @brief Indicates clearing the output channel on an external event is enabled for the output channel.
+ * @note This function enables clearing the output channel on an external event.
+ * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode.
+ * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether
+ * or not a timer instance can clear the OCxREF signal on an external event.
+ * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n
+ * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n
+ * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n
+ * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n
+ * CCMR3 OC5CE LL_TIM_OC_IsEnabledClear\n
+ * CCMR3 OC6CE LL_TIM_OC_IsEnabledClear
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @arg @ref LL_TIM_CHANNEL_CH5
+ * @arg @ref LL_TIM_CHANNEL_CH6
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(const TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel];
+ return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of
+ * the Ocx and OCxN signals).
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * dead-time insertion feature is supported by a timer instance.
+ * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter
+ * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime
+ * @param TIMx Timer instance
+ * @param DeadTime between Min_Data=0 and Max_Data=255
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime)
+{
+ MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime);
+}
+
+/**
+ * @brief Set compare value for output channel 1 (TIMx_CCR1).
+ * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 1 is supported by a timer instance.
+ * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1
+ * @param TIMx Timer instance
+ * @param CompareValue between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue)
+{
+ WRITE_REG(TIMx->CCR1, CompareValue);
+}
+
+/**
+ * @brief Set compare value for output channel 2 (TIMx_CCR2).
+ * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 2 is supported by a timer instance.
+ * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2
+ * @param TIMx Timer instance
+ * @param CompareValue between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue)
+{
+ WRITE_REG(TIMx->CCR2, CompareValue);
+}
+
+/**
+ * @brief Set compare value for output channel 3 (TIMx_CCR3).
+ * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not
+ * output channel is supported by a timer instance.
+ * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3
+ * @param TIMx Timer instance
+ * @param CompareValue between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue)
+{
+ WRITE_REG(TIMx->CCR3, CompareValue);
+}
+
+/**
+ * @brief Set compare value for output channel 4 (TIMx_CCR4).
+ * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 4 is supported by a timer instance.
+ * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4
+ * @param TIMx Timer instance
+ * @param CompareValue between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue)
+{
+ WRITE_REG(TIMx->CCR4, CompareValue);
+}
+
+/**
+ * @brief Set compare value for output channel 5 (TIMx_CCR5).
+ * @note Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 5 is supported by a timer instance.
+ * @rmtoll CCR5 CCR5 LL_TIM_OC_SetCompareCH5
+ * @param TIMx Timer instance
+ * @param CompareValue between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetCompareCH5(TIM_TypeDef *TIMx, uint32_t CompareValue)
+{
+ MODIFY_REG(TIMx->CCR5, TIM_CCR5_CCR5, CompareValue);
+}
+
+/**
+ * @brief Set compare value for output channel 6 (TIMx_CCR6).
+ * @note Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 6 is supported by a timer instance.
+ * @rmtoll CCR6 CCR6 LL_TIM_OC_SetCompareCH6
+ * @param TIMx Timer instance
+ * @param CompareValue between Min_Data=0 and Max_Data=65535
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_OC_SetCompareCH6(TIM_TypeDef *TIMx, uint32_t CompareValue)
+{
+ WRITE_REG(TIMx->CCR6, CompareValue);
+}
+
+/**
+ * @brief Get compare value (TIMx_CCR1) set for output channel 1.
+ * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 1 is supported by a timer instance.
+ * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1
+ * @param TIMx Timer instance
+ * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR1));
+}
+
+/**
+ * @brief Get compare value (TIMx_CCR2) set for output channel 2.
+ * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 2 is supported by a timer instance.
+ * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2
+ * @param TIMx Timer instance
+ * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR2));
+}
+
+/**
+ * @brief Get compare value (TIMx_CCR3) set for output channel 3.
+ * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 3 is supported by a timer instance.
+ * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3
+ * @param TIMx Timer instance
+ * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR3));
+}
+
+/**
+ * @brief Get compare value (TIMx_CCR4) set for output channel 4.
+ * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 4 is supported by a timer instance.
+ * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4
+ * @param TIMx Timer instance
+ * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR4));
+}
+
+/**
+ * @brief Get compare value (TIMx_CCR5) set for output channel 5.
+ * @note Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 5 is supported by a timer instance.
+ * @rmtoll CCR5 CCR5 LL_TIM_OC_GetCompareCH5
+ * @param TIMx Timer instance
+ * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH5(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_BIT(TIMx->CCR5, TIM_CCR5_CCR5));
+}
+
+/**
+ * @brief Get compare value (TIMx_CCR6) set for output channel 6.
+ * @note Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not
+ * output channel 6 is supported by a timer instance.
+ * @rmtoll CCR6 CCR6 LL_TIM_OC_GetCompareCH6
+ * @param TIMx Timer instance
+ * @retval CompareValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH6(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR6));
+}
+
+/**
+ * @brief Select on which reference signal the OC5REF is combined to.
+ * @note Macro IS_TIM_COMBINED3PHASEPWM_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports the combined 3-phase PWM mode.
+ * @rmtoll CCR5 GC5C3 LL_TIM_SetCH5CombinedChannels\n
+ * CCR5 GC5C2 LL_TIM_SetCH5CombinedChannels\n
+ * CCR5 GC5C1 LL_TIM_SetCH5CombinedChannels
+ * @param TIMx Timer instance
+ * @param GroupCH5 This parameter can be a combination of the following values:
+ * @arg @ref LL_TIM_GROUPCH5_NONE
+ * @arg @ref LL_TIM_GROUPCH5_OC1REFC
+ * @arg @ref LL_TIM_GROUPCH5_OC2REFC
+ * @arg @ref LL_TIM_GROUPCH5_OC3REFC
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetCH5CombinedChannels(TIM_TypeDef *TIMx, uint32_t GroupCH5)
+{
+ MODIFY_REG(TIMx->CCR5, (TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1), GroupCH5);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration
+ * @{
+ */
+/**
+ * @brief Configure input channel.
+ * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n
+ * CCMR1 IC1PSC LL_TIM_IC_Config\n
+ * CCMR1 IC1F LL_TIM_IC_Config\n
+ * CCMR1 CC2S LL_TIM_IC_Config\n
+ * CCMR1 IC2PSC LL_TIM_IC_Config\n
+ * CCMR1 IC2F LL_TIM_IC_Config\n
+ * CCMR2 CC3S LL_TIM_IC_Config\n
+ * CCMR2 IC3PSC LL_TIM_IC_Config\n
+ * CCMR2 IC3F LL_TIM_IC_Config\n
+ * CCMR2 CC4S LL_TIM_IC_Config\n
+ * CCMR2 IC4PSC LL_TIM_IC_Config\n
+ * CCMR2 IC4F LL_TIM_IC_Config\n
+ * CCER CC1P LL_TIM_IC_Config\n
+ * CCER CC1NP LL_TIM_IC_Config\n
+ * CCER CC2P LL_TIM_IC_Config\n
+ * CCER CC2NP LL_TIM_IC_Config\n
+ * CCER CC3P LL_TIM_IC_Config\n
+ * CCER CC3NP LL_TIM_IC_Config\n
+ * CCER CC4P LL_TIM_IC_Config\n
+ * CCER CC4NP LL_TIM_IC_Config
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param Configuration This parameter must be a combination of all the following values:
+ * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC
+ * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8
+ * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]),
+ ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \
+ << SHIFT_TAB_ICxx[iChannel]);
+ MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
+ (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]);
+}
+
+/**
+ * @brief Set the active input.
+ * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n
+ * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n
+ * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n
+ * CCMR2 CC4S LL_TIM_IC_SetActiveInput
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param ICActiveInput This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI
+ * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI
+ * @arg @ref LL_TIM_ACTIVEINPUT_TRC
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]);
+}
+
+/**
+ * @brief Get the current active input.
+ * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n
+ * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n
+ * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n
+ * CCMR2 CC4S LL_TIM_IC_GetActiveInput
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI
+ * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI
+ * @arg @ref LL_TIM_ACTIVEINPUT_TRC
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(const TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
+}
+
+/**
+ * @brief Set the prescaler of input channel.
+ * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n
+ * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n
+ * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n
+ * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param ICPrescaler This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ICPSC_DIV1
+ * @arg @ref LL_TIM_ICPSC_DIV2
+ * @arg @ref LL_TIM_ICPSC_DIV4
+ * @arg @ref LL_TIM_ICPSC_DIV8
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]);
+}
+
+/**
+ * @brief Get the current prescaler value acting on an input channel.
+ * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n
+ * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n
+ * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n
+ * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_ICPSC_DIV1
+ * @arg @ref LL_TIM_ICPSC_DIV2
+ * @arg @ref LL_TIM_ICPSC_DIV4
+ * @arg @ref LL_TIM_ICPSC_DIV8
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(const TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
+}
+
+/**
+ * @brief Set the input filter duration.
+ * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n
+ * CCMR1 IC2F LL_TIM_IC_SetFilter\n
+ * CCMR2 IC3F LL_TIM_IC_SetFilter\n
+ * CCMR2 IC4F LL_TIM_IC_SetFilter
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param ICFilter This parameter can be one of the following values:
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]);
+}
+
+/**
+ * @brief Get the input filter duration.
+ * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n
+ * CCMR1 IC2F LL_TIM_IC_GetFilter\n
+ * CCMR2 IC3F LL_TIM_IC_GetFilter\n
+ * CCMR2 IC4F LL_TIM_IC_GetFilter
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4
+ * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6
+ * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(const TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
+ return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U);
+}
+
+/**
+ * @brief Set the input channel polarity.
+ * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n
+ * CCER CC1NP LL_TIM_IC_SetPolarity\n
+ * CCER CC2P LL_TIM_IC_SetPolarity\n
+ * CCER CC2NP LL_TIM_IC_SetPolarity\n
+ * CCER CC3P LL_TIM_IC_SetPolarity\n
+ * CCER CC3NP LL_TIM_IC_SetPolarity\n
+ * CCER CC4P LL_TIM_IC_SetPolarity\n
+ * CCER CC4NP LL_TIM_IC_SetPolarity
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @param ICPolarity This parameter can be one of the following values:
+ * @arg @ref LL_TIM_IC_POLARITY_RISING
+ * @arg @ref LL_TIM_IC_POLARITY_FALLING
+ * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
+ ICPolarity << SHIFT_TAB_CCxP[iChannel]);
+}
+
+/**
+ * @brief Get the current input channel polarity.
+ * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n
+ * CCER CC1NP LL_TIM_IC_GetPolarity\n
+ * CCER CC2P LL_TIM_IC_GetPolarity\n
+ * CCER CC2NP LL_TIM_IC_GetPolarity\n
+ * CCER CC3P LL_TIM_IC_GetPolarity\n
+ * CCER CC3NP LL_TIM_IC_GetPolarity\n
+ * CCER CC4P LL_TIM_IC_GetPolarity\n
+ * CCER CC4NP LL_TIM_IC_GetPolarity
+ * @param TIMx Timer instance
+ * @param Channel This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CHANNEL_CH1
+ * @arg @ref LL_TIM_CHANNEL_CH2
+ * @arg @ref LL_TIM_CHANNEL_CH3
+ * @arg @ref LL_TIM_CHANNEL_CH4
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_TIM_IC_POLARITY_RISING
+ * @arg @ref LL_TIM_IC_POLARITY_FALLING
+ * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel)
+{
+ uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
+ return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >>
+ SHIFT_TAB_CCxP[iChannel]);
+}
+
+/**
+ * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination).
+ * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides an XOR input.
+ * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->CR2, TIM_CR2_TI1S);
+}
+
+/**
+ * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input.
+ * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides an XOR input.
+ * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S);
+}
+
+/**
+ * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input.
+ * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides an XOR input.
+ * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Get captured value for input channel 1.
+ * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not
+ * input channel 1 is supported by a timer instance.
+ * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1
+ * @param TIMx Timer instance
+ * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR1));
+}
+
+/**
+ * @brief Get captured value for input channel 2.
+ * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not
+ * input channel 2 is supported by a timer instance.
+ * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2
+ * @param TIMx Timer instance
+ * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR2));
+}
+
+/**
+ * @brief Get captured value for input channel 3.
+ * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not
+ * input channel 3 is supported by a timer instance.
+ * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3
+ * @param TIMx Timer instance
+ * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR3));
+}
+
+/**
+ * @brief Get captured value for input channel 4.
+ * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF.
+ * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports a 32 bits counter.
+ * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not
+ * input channel 4 is supported by a timer instance.
+ * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4
+ * @param TIMx Timer instance
+ * @retval CapturedValue (between Min_Data=0 and Max_Data=65535)
+ */
+__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(const TIM_TypeDef *TIMx)
+{
+ return (uint32_t)(READ_REG(TIMx->CCR4));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection
+ * @{
+ */
+/**
+ * @brief Enable external clock mode 2.
+ * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal.
+ * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports external clock mode2.
+ * @rmtoll SMCR ECE LL_TIM_EnableExternalClock
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->SMCR, TIM_SMCR_ECE);
+}
+
+/**
+ * @brief Disable external clock mode 2.
+ * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports external clock mode2.
+ * @rmtoll SMCR ECE LL_TIM_DisableExternalClock
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE);
+}
+
+/**
+ * @brief Indicate whether external clock mode 2 is enabled.
+ * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports external clock mode2.
+ * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Set the clock source of the counter clock.
+ * @note when selected clock source is external clock mode 1, the timer input
+ * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput()
+ * function. This timer input must be configured by calling
+ * the @ref LL_TIM_IC_Config() function.
+ * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports external clock mode1.
+ * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports external clock mode2.
+ * @rmtoll SMCR SMS LL_TIM_SetClockSource\n
+ * SMCR ECE LL_TIM_SetClockSource
+ * @param TIMx Timer instance
+ * @param ClockSource This parameter can be one of the following values:
+ * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL
+ * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1
+ * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource);
+}
+
+/**
+ * @brief Set the encoder interface mode.
+ * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance supports the encoder mode.
+ * @rmtoll SMCR SMS LL_TIM_SetEncoderMode
+ * @param TIMx Timer instance
+ * @param EncoderMode This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ENCODERMODE_X2_TI1
+ * @arg @ref LL_TIM_ENCODERMODE_X2_TI2
+ * @arg @ref LL_TIM_ENCODERMODE_X4_TI12
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration
+ * @{
+ */
+/**
+ * @brief Set the trigger output (TRGO) used for timer synchronization .
+ * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance can operate as a master timer.
+ * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput
+ * @param TIMx Timer instance
+ * @param TimerSynchronization This parameter can be one of the following values:
+ * @arg @ref LL_TIM_TRGO_RESET
+ * @arg @ref LL_TIM_TRGO_ENABLE
+ * @arg @ref LL_TIM_TRGO_UPDATE
+ * @arg @ref LL_TIM_TRGO_CC1IF
+ * @arg @ref LL_TIM_TRGO_OC1REF
+ * @arg @ref LL_TIM_TRGO_OC2REF
+ * @arg @ref LL_TIM_TRGO_OC3REF
+ * @arg @ref LL_TIM_TRGO_OC4REF
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization)
+{
+ MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization);
+}
+
+/**
+ * @brief Set the trigger output 2 (TRGO2) used for ADC synchronization .
+ * @note Macro IS_TIM_TRGO2_INSTANCE(TIMx) can be used to check
+ * whether or not a timer instance can be used for ADC synchronization.
+ * @rmtoll CR2 MMS2 LL_TIM_SetTriggerOutput2
+ * @param TIMx Timer Instance
+ * @param ADCSynchronization This parameter can be one of the following values:
+ * @arg @ref LL_TIM_TRGO2_RESET
+ * @arg @ref LL_TIM_TRGO2_ENABLE
+ * @arg @ref LL_TIM_TRGO2_UPDATE
+ * @arg @ref LL_TIM_TRGO2_CC1F
+ * @arg @ref LL_TIM_TRGO2_OC1
+ * @arg @ref LL_TIM_TRGO2_OC2
+ * @arg @ref LL_TIM_TRGO2_OC3
+ * @arg @ref LL_TIM_TRGO2_OC4
+ * @arg @ref LL_TIM_TRGO2_OC5
+ * @arg @ref LL_TIM_TRGO2_OC6
+ * @arg @ref LL_TIM_TRGO2_OC4_RISINGFALLING
+ * @arg @ref LL_TIM_TRGO2_OC6_RISINGFALLING
+ * @arg @ref LL_TIM_TRGO2_OC4_RISING_OC6_RISING
+ * @arg @ref LL_TIM_TRGO2_OC4_RISING_OC6_FALLING
+ * @arg @ref LL_TIM_TRGO2_OC5_RISING_OC6_RISING
+ * @arg @ref LL_TIM_TRGO2_OC5_RISING_OC6_FALLING
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetTriggerOutput2(TIM_TypeDef *TIMx, uint32_t ADCSynchronization)
+{
+ MODIFY_REG(TIMx->CR2, TIM_CR2_MMS2, ADCSynchronization);
+}
+
+/**
+ * @brief Set the synchronization mode of a slave timer.
+ * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance can operate as a slave timer.
+ * @rmtoll SMCR SMS LL_TIM_SetSlaveMode
+ * @param TIMx Timer instance
+ * @param SlaveMode This parameter can be one of the following values:
+ * @arg @ref LL_TIM_SLAVEMODE_DISABLED
+ * @arg @ref LL_TIM_SLAVEMODE_RESET
+ * @arg @ref LL_TIM_SLAVEMODE_GATED
+ * @arg @ref LL_TIM_SLAVEMODE_TRIGGER
+ * @arg @ref LL_TIM_SLAVEMODE_COMBINED_RESETTRIGGER
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode);
+}
+
+/**
+ * @brief Set the selects the trigger input to be used to synchronize the counter.
+ * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance can operate as a slave timer.
+ * @rmtoll SMCR TS LL_TIM_SetTriggerInput
+ * @param TIMx Timer instance
+ * @param TriggerInput This parameter can be one of the following values:
+ * @arg @ref LL_TIM_TS_ITR0
+ * @arg @ref LL_TIM_TS_ITR1
+ * @arg @ref LL_TIM_TS_ITR2
+ * @arg @ref LL_TIM_TS_ITR3
+ * @arg @ref LL_TIM_TS_TI1F_ED
+ * @arg @ref LL_TIM_TS_TI1FP1
+ * @arg @ref LL_TIM_TS_TI2FP2
+ * @arg @ref LL_TIM_TS_ETRF
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput);
+}
+
+/**
+ * @brief Enable the Master/Slave mode.
+ * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance can operate as a slave timer.
+ * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->SMCR, TIM_SMCR_MSM);
+}
+
+/**
+ * @brief Disable the Master/Slave mode.
+ * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance can operate as a slave timer.
+ * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM);
+}
+
+/**
+ * @brief Indicates whether the Master/Slave mode is enabled.
+ * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance can operate as a slave timer.
+ * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Configure the external trigger (ETR) input.
+ * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides an external trigger input.
+ * @rmtoll SMCR ETP LL_TIM_ConfigETR\n
+ * SMCR ETPS LL_TIM_ConfigETR\n
+ * SMCR ETF LL_TIM_ConfigETR
+ * @param TIMx Timer instance
+ * @param ETRPolarity This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED
+ * @arg @ref LL_TIM_ETR_POLARITY_INVERTED
+ * @param ETRPrescaler This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ETR_PRESCALER_DIV1
+ * @arg @ref LL_TIM_ETR_PRESCALER_DIV2
+ * @arg @ref LL_TIM_ETR_PRESCALER_DIV4
+ * @arg @ref LL_TIM_ETR_PRESCALER_DIV8
+ * @param ETRFilter This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV1
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6
+ * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler,
+ uint32_t ETRFilter)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter);
+}
+
+/**
+ * @brief Select the external trigger (ETR) input source.
+ * @note Macro IS_TIM_ETRSEL_INSTANCE(TIMx) can be used to check whether or
+ * not a timer instance supports ETR source selection.
+ * @rmtoll OR2 ETRSEL LL_TIM_SetETRSource
+ * @param TIMx Timer instance
+ * @param ETRSource This parameter can be one of the following values:
+ * @arg @ref LL_TIM_ETRSOURCE_LEGACY
+ * @arg @ref LL_TIM_ETRSOURCE_COMP1
+ * @arg @ref LL_TIM_ETRSOURCE_COMP2
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetETRSource(TIM_TypeDef *TIMx, uint32_t ETRSource)
+{
+ MODIFY_REG(TIMx->OR2, TIMx_OR2_ETRSEL, ETRSource);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Break_Function Break function configuration
+ * @{
+ */
+/**
+ * @brief Enable the break function.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR BKE LL_TIM_EnableBRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->BDTR, TIM_BDTR_BKE);
+}
+
+/**
+ * @brief Disable the break function.
+ * @rmtoll BDTR BKE LL_TIM_DisableBRK
+ * @param TIMx Timer instance
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE);
+}
+
+/**
+ * @brief Configure the break input.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR BKP LL_TIM_ConfigBRK\n
+ * BDTR BKF LL_TIM_ConfigBRK
+ * @param TIMx Timer instance
+ * @param BreakPolarity This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BREAK_POLARITY_LOW
+ * @arg @ref LL_TIM_BREAK_POLARITY_HIGH
+ * @param BreakFilter This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV1
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N2
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N4
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV1_N8
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV2_N6
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV2_N8
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV4_N6
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV4_N8
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV8_N6
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV8_N8
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N5
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N6
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV16_N8
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N5
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N6
+ * @arg @ref LL_TIM_BREAK_FILTER_FDIV32_N8
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity,
+ uint32_t BreakFilter)
+{
+ MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP | TIM_BDTR_BKF, BreakPolarity | BreakFilter);
+}
+
+/**
+ * @brief Enable the break 2 function.
+ * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a second break input.
+ * @rmtoll BDTR BK2E LL_TIM_EnableBRK2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableBRK2(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->BDTR, TIM_BDTR_BK2E);
+}
+
+/**
+ * @brief Disable the break 2 function.
+ * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a second break input.
+ * @rmtoll BDTR BK2E LL_TIM_DisableBRK2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableBRK2(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BK2E);
+}
+
+/**
+ * @brief Configure the break 2 input.
+ * @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a second break input.
+ * @rmtoll BDTR BK2P LL_TIM_ConfigBRK2\n
+ * BDTR BK2F LL_TIM_ConfigBRK2
+ * @param TIMx Timer instance
+ * @param Break2Polarity This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BREAK2_POLARITY_LOW
+ * @arg @ref LL_TIM_BREAK2_POLARITY_HIGH
+ * @param Break2Filter This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N2
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N4
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV1_N8
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV2_N6
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV2_N8
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV4_N6
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV4_N8
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV8_N6
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV8_N8
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N5
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N6
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV16_N8
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N5
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N6
+ * @arg @ref LL_TIM_BREAK2_FILTER_FDIV32_N8
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ConfigBRK2(TIM_TypeDef *TIMx, uint32_t Break2Polarity, uint32_t Break2Filter)
+{
+ MODIFY_REG(TIMx->BDTR, TIM_BDTR_BK2P | TIM_BDTR_BK2F, Break2Polarity | Break2Filter);
+}
+
+/**
+ * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n
+ * BDTR OSSR LL_TIM_SetOffStates
+ * @param TIMx Timer instance
+ * @param OffStateIdle This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OSSI_DISABLE
+ * @arg @ref LL_TIM_OSSI_ENABLE
+ * @param OffStateRun This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OSSR_DISABLE
+ * @arg @ref LL_TIM_OSSR_ENABLE
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun)
+{
+ MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun);
+}
+
+/**
+ * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active).
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->BDTR, TIM_BDTR_AOE);
+}
+
+/**
+ * @brief Disable automatic output (MOE can be set only by software).
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE);
+}
+
+/**
+ * @brief Indicate whether automatic output is enabled.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register).
+ * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by
+ * software and is reset in case of break or break2 event
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->BDTR, TIM_BDTR_MOE);
+}
+
+/**
+ * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register).
+ * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by
+ * software and is reset in case of break or break2 event.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE);
+}
+
+/**
+ * @brief Indicates whether outputs are enabled.
+ * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+ * a timer instance provides a break input.
+ * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable the signals connected to the designated timer break input.
+ * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether
+ * or not a timer instance allows for break input selection.
+ * @rmtoll OR2 BKINE LL_TIM_EnableBreakInputSource\n
+ * OR2 BKCMP1E LL_TIM_EnableBreakInputSource\n
+ * OR2 BKCMP2E LL_TIM_EnableBreakInputSource\n
+ * OR2 BKDF1BK0E LL_TIM_EnableBreakInputSource\n
+ * OR3 BK2INE LL_TIM_EnableBreakInputSource\n
+ * OR3 BK2CMP1E LL_TIM_EnableBreakInputSource\n
+ * OR3 BK2CMP2E LL_TIM_EnableBreakInputSource\n
+ * OR3 BK2DF1BK1E LL_TIM_EnableBreakInputSource
+ * @param TIMx Timer instance
+ * @param BreakInput This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BREAK_INPUT_BKIN
+ * @arg @ref LL_TIM_BREAK_INPUT_BKIN2
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BKIN_SOURCE_BKIN
+ * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1
+ * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2
+ * @arg @ref LL_TIM_BKIN_SOURCE_DF1BK
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source)
+{
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->OR2) + BreakInput));
+ SET_BIT(*pReg, Source);
+}
+
+/**
+ * @brief Disable the signals connected to the designated timer break input.
+ * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether
+ * or not a timer instance allows for break input selection.
+ * @rmtoll OR2 BKINE LL_TIM_DisableBreakInputSource\n
+ * OR2 BKCMP1E LL_TIM_DisableBreakInputSource\n
+ * OR2 BKCMP2E LL_TIM_DisableBreakInputSource\n
+ * OR2 BKDF1BK0E LL_TIM_DisableBreakInputSource\n
+ * OR3 BK2INE LL_TIM_DisableBreakInputSource\n
+ * OR3 BK2CMP1E LL_TIM_DisableBreakInputSource\n
+ * OR3 BK2CMP2E LL_TIM_DisableBreakInputSource\n
+ * OR3 BK2DF1BK1E LL_TIM_DisableBreakInputSource
+ * @param TIMx Timer instance
+ * @param BreakInput This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BREAK_INPUT_BKIN
+ * @arg @ref LL_TIM_BREAK_INPUT_BKIN2
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BKIN_SOURCE_BKIN
+ * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1
+ * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2
+ * @arg @ref LL_TIM_BKIN_SOURCE_DF1BK
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source)
+{
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->OR2) + BreakInput));
+ CLEAR_BIT(*pReg, Source);
+}
+
+/**
+ * @brief Set the polarity of the break signal for the timer break input.
+ * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether
+ * or not a timer instance allows for break input selection.
+ * @rmtoll OR2 BKINP LL_TIM_SetBreakInputSourcePolarity\n
+ * OR2 BKCMP1P LL_TIM_SetBreakInputSourcePolarity\n
+ * OR2 BKCMP2P LL_TIM_SetBreakInputSourcePolarity\n
+ * OR3 BK2INP LL_TIM_SetBreakInputSourcePolarity\n
+ * OR3 BK2CMP1P LL_TIM_SetBreakInputSourcePolarity\n
+ * OR3 BK2CMP2P LL_TIM_SetBreakInputSourcePolarity
+ * @param TIMx Timer instance
+ * @param BreakInput This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BREAK_INPUT_BKIN
+ * @arg @ref LL_TIM_BREAK_INPUT_BKIN2
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BKIN_SOURCE_BKIN
+ * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1
+ * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP2
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_TIM_BKIN_POLARITY_LOW
+ * @arg @ref LL_TIM_BKIN_POLARITY_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source,
+ uint32_t Polarity)
+{
+ __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->OR2) + BreakInput));
+ MODIFY_REG(*pReg, (TIMx_OR2_BKINP << TIM_POSITION_BRK_SOURCE), (Polarity << TIM_POSITION_BRK_SOURCE));
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration
+ * @{
+ */
+/**
+ * @brief Configures the timer DMA burst feature.
+ * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or
+ * not a timer instance supports the DMA burst mode.
+ * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n
+ * DCR DBA LL_TIM_ConfigDMABurst
+ * @param TIMx Timer instance
+ * @param DMABurstBaseAddress This parameter can be one of the following values:
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_SR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_OR1
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR3
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR5
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR6
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_OR2
+ * @arg @ref LL_TIM_DMABURST_BASEADDR_OR3
+ * @param DMABurstLength This parameter can be one of the following values:
+ * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER
+ * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS
+ * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength)
+{
+ MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping
+ * @{
+ */
+/**
+ * @brief Remap TIM inputs (input channel, internal/external triggers).
+ * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not
+ * a some timer inputs can be remapped.
+ @if STM32L486xx
+ * @rmtoll TIM1_OR1 ETR_ADC1_RMP LL_TIM_SetRemap\n
+ * TIM1_OR1 ETR_ADC3_RMP LL_TIM_SetRemap\n
+ * TIM1_OR1 TI1_RMP LL_TIM_SetRemap\n
+ * TIM8_OR1 ETR_ADC2_RMP LL_TIM_SetRemap\n
+ * TIM8_OR1 ETR_ADC3_RMP LL_TIM_SetRemap\n
+ * TIM8_OR1 TI1_RMP LL_TIM_SetRemap\n
+ * TIM2_OR1 ITR1_RMP LL_TIM_SetRemap\n
+ * TIM2_OR1 TI4_RMP LL_TIM_SetRemap\n
+ * TIM2_OR1 TI1_RMP LL_TIM_SetRemap\n
+ * TIM3_OR1 TI1_RMP LL_TIM_SetRemap\n
+ * TIM15_OR1 TI1_RMP LL_TIM_SetRemap\n
+ * TIM15_OR1 ENCODER_MODE LL_TIM_SetRemap\n
+ * TIM16_OR1 TI1_RMP LL_TIM_SetRemap\n
+ * TIM17_OR1 TI1_RMP LL_TIM_SetRemap
+ @endif
+ @if STM32L443xx
+ * @rmtoll TIM1_OR1 ETR_ADC1_RMP LL_TIM_SetRemap\n
+ * TIM1_OR1 ETR_ADC3_RMP LL_TIM_SetRemap\n
+ * TIM1_OR1 TI1_RMP LL_TIM_SetRemap\n
+ * TIM2_OR1 ITR1_RMP LL_TIM_SetRemap\n
+ * TIM2_OR1 TI4_RMP LL_TIM_SetRemap\n
+ * TIM2_OR1 TI1_RMP LL_TIM_SetRemap\n
+ * TIM15_OR1 TI1_RMP LL_TIM_SetRemap\n
+ * TIM15_OR1 ENCODER_MODE LL_TIM_SetRemap\n
+ * TIM16_OR1 TI1_RMP LL_TIM_SetRemap\n
+ @endif
+ * @param TIMx Timer instance
+ * @param Remap Remap param depends on the TIMx. Description available only
+ * in CHM version of the User Manual (not in .pdf).
+ * Otherwise see Reference Manual description of OR registers.
+ *
+ * Below description summarizes "Timer Instance" and "Remap" param combinations:
+ *
+ @if STM32L486xx
+ * TIM1: any combination of TI1_RMP, ADC3_RMP, ADC1_RMP where
+ *
+ * . . ADC1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM1_ETR_ADC1_RMP_NC
+ * @arg @ref LL_TIM_TIM1_ETR_ADC1_RMP_AWD1
+ * @arg @ref LL_TIM_TIM1_ETR_ADC1_RMP_AWD2
+ * @arg @ref LL_TIM_TIM1_ETR_ADC1_RMP_AWD3
+ *
+ * . . ADC3_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM1_ETR_ADC3_RMP_NC
+ * @arg @ref LL_TIM_TIM1_ETR_ADC3_RMP_AWD1
+ * @arg @ref LL_TIM_TIM1_ETR_ADC3_RMP_AWD2
+ * @arg @ref LL_TIM_TIM1_ETR_ADC3_RMP_AWD3
+ *
+ * . . TI1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM1_TI1_RMP_GPIO
+ * @arg @ref LL_TIM_TIM1_TI1_RMP_COMP1
+ *
+ * TIM2: any combination of ITR1_RMP, ETR1_RMP, TI4_RMP where
+ *
+ * ITR1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO
+ * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF
+ *
+ * . . ETR1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM2_ETR_RMP_GPIO
+ * @arg @ref LL_TIM_TIM2_ETR_RMP_LSE
+ *
+ * . . TI4_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM2_TI4_RMP_GPIO
+ * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP1
+ * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP2
+ * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP1_COMP2
+ *
+ * TIM3: one of the following values
+ *
+ * @arg @ref LL_TIM_TIM3_TI1_RMP_GPIO
+ * @arg @ref LL_TIM_TIM3_TI1_RMP_COMP1
+ * @arg @ref LL_TIM_TIM3_TI1_RMP_COMP2
+ * @arg @ref LL_TIM_TIM3_TI1_RMP_COMP1_COMP2
+ *
+ * TIM8: any combination of TI1_RMP, ADC3_RMP, ADC1_RMP where
+ *
+ * . . ADC1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM8_ETR_ADC2_RMP_NC
+ * @arg @ref LL_TIM_TIM8_ETR_ADC2_RMP_AWD1
+ * @arg @ref LL_TIM_TIM8_ETR_ADC2_RMP_AWD2
+ * @arg @ref LL_TIM_TIM8_ETR_ADC2_RMP_AWD3
+ *
+ * . . ADC3_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM8_ETR_ADC3_RMP_NC
+ * @arg @ref LL_TIM_TIM8_ETR_ADC3_RMP_AWD1
+ * @arg @ref LL_TIM_TIM8_ETR_ADC3_RMP_AWD2
+ * @arg @ref LL_TIM_TIM8_ETR_ADC3_RMP_AWD3
+ *
+ * . . TI1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM8_TI1_RMP_GPIO
+ * @arg @ref LL_TIM_TIM8_TI1_RMP_COMP2
+ *
+ * TIM15: any combination of TI1_RMP, ENCODER_MODE where
+ *
+ * . . TI1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM15_TI1_RMP_GPIO
+ * @arg @ref LL_TIM_TIM15_TI1_RMP_LSE
+ *
+ * . . ENCODER_MODE can be one of the following values
+ * @arg @ref LL_TIM_TIM15_ENCODERMODE_NOREDIRECTION
+ * @arg @ref LL_TIM_TIM15_ENCODERMODE_TIM2
+ * @arg @ref LL_TIM_TIM15_ENCODERMODE_TIM3
+ * @arg @ref LL_TIM_TIM15_ENCODERMODE_TIM4
+ *
+ * TIM16: one of the following values
+ *
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_GPIO
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_LSI
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_LSE
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_RTC
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_MSI
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_HSE_32
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_MCO
+ *
+ * TIM17: one of the following values
+ *
+ * @arg @ref LL_TIM_TIM17_TI1_RMP_GPIO
+ * @arg @ref LL_TIM_TIM17_TI1_RMP_MSI
+ * @arg @ref LL_TIM_TIM17_TI1_RMP_HSE_32
+ * @arg @ref LL_TIM_TIM17_TI1_RMP_MCO
+ @endif
+ @if STM32L443xx
+ * TIM1: any combination of TI1_RMP, ADC3_RMP, ADC1_RMP where
+ *
+ * . . ADC1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM1_ETR_ADC1_RMP_NC
+ * @arg @ref LL_TIM_TIM1_ETR_ADC1_RMP_AWD1
+ * @arg @ref LL_TIM_TIM1_ETR_ADC1_RMP_AWD2
+ * @arg @ref LL_TIM_TIM1_ETR_ADC1_RMP_AWD3
+ *
+ * . . TI1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM1_TI1_RMP_GPIO
+ * @arg @ref LL_TIM_TIM1_TI1_RMP_COMP1
+ *
+ * TIM2: any combination of ITR1_RMP, ETR1_RMP, TI4_RMP where
+ *
+ * ITR1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM2_ITR1_RMP_NONE
+ * @arg @ref LL_TIM_TIM2_ITR1_RMP_USB_SOF
+ *
+ * . . ETR1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM2_ETR_RMP_GPIO
+ * @arg @ref LL_TIM_TIM2_ETR_RMP_LSE
+ *
+ * . . TI4_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM2_TI4_RMP_GPIO
+ * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP1
+ * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP2
+ * @arg @ref LL_TIM_TIM2_TI4_RMP_COMP1_COMP2
+ *
+ * TIM15: any combination of TI1_RMP, ENCODER_MODE where
+ *
+ * . . TI1_RMP can be one of the following values
+ * @arg @ref LL_TIM_TIM15_TI1_RMP_GPIO
+ * @arg @ref LL_TIM_TIM15_TI1_RMP_LSE
+ *
+ * . . ENCODER_MODE can be one of the following values
+ * @arg @ref LL_TIM_TIM15_ENCODERMODE_NOREDIRECTION
+ * @arg @ref LL_TIM_TIM15_ENCODERMODE_TIM2
+ * @arg @ref LL_TIM_TIM15_ENCODERMODE_TIM3
+ * @arg @ref LL_TIM_TIM15_ENCODERMODE_TIM4
+ *
+ * TIM16: one of the following values
+ *
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_GPIO
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_LSI
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_LSE
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_RTC
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_MSI
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_HSE_32
+ * @arg @ref LL_TIM_TIM16_TI1_RMP_MCO
+ @endif
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap)
+{
+ MODIFY_REG(TIMx->OR1, (Remap >> TIMx_OR1_RMP_SHIFT), (Remap & TIMx_OR1_RMP_MASK));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_OCREF_Clear OCREF_Clear_Management
+ * @{
+ */
+/**
+ * @brief Set the OCREF clear input source
+ * @note The OCxREF signal of a given channel can be cleared when a high level is applied on the OCREF_CLR_INPUT
+ * @note This function can only be used in Output compare and PWM modes.
+ * @rmtoll SMCR OCCS LL_TIM_SetOCRefClearInputSource
+ * @param TIMx Timer instance
+ * @param OCRefClearInputSource This parameter can be one of the following values:
+ * @arg @ref LL_TIM_OCREF_CLR_INT_NC
+ * @arg @ref LL_TIM_OCREF_CLR_INT_ETR
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_SetOCRefClearInputSource(TIM_TypeDef *TIMx, uint32_t OCRefClearInputSource)
+{
+ MODIFY_REG(TIMx->SMCR, TIM_SMCR_OCCS, OCRefClearInputSource);
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management
+ * @{
+ */
+/**
+ * @brief Clear the update interrupt flag (UIF).
+ * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_UIF));
+}
+
+/**
+ * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending).
+ * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 1 interrupt flag (CC1F).
+ * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending).
+ * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 2 interrupt flag (CC2F).
+ * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending).
+ * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 3 interrupt flag (CC3F).
+ * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending).
+ * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 4 interrupt flag (CC4F).
+ * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending).
+ * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 5 interrupt flag (CC5F).
+ * @rmtoll SR CC5IF LL_TIM_ClearFlag_CC5
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC5(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC5IF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 5 interrupt flag (CC5F) is set (Capture/Compare 5 interrupt is pending).
+ * @rmtoll SR CC5IF LL_TIM_IsActiveFlag_CC5
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC5(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC5IF) == (TIM_SR_CC5IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 6 interrupt flag (CC6F).
+ * @rmtoll SR CC6IF LL_TIM_ClearFlag_CC6
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC6(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC6IF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 6 interrupt flag (CC6F) is set (Capture/Compare 6 interrupt is pending).
+ * @rmtoll SR CC6IF LL_TIM_IsActiveFlag_CC6
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC6(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC6IF) == (TIM_SR_CC6IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the commutation interrupt flag (COMIF).
+ * @rmtoll SR COMIF LL_TIM_ClearFlag_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF));
+}
+
+/**
+ * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending).
+ * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the trigger interrupt flag (TIF).
+ * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_TIF));
+}
+
+/**
+ * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending).
+ * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the break interrupt flag (BIF).
+ * @rmtoll SR BIF LL_TIM_ClearFlag_BRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_BIF));
+}
+
+/**
+ * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending).
+ * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the break 2 interrupt flag (B2IF).
+ * @rmtoll SR B2IF LL_TIM_ClearFlag_BRK2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_BRK2(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_B2IF));
+}
+
+/**
+ * @brief Indicate whether break 2 interrupt flag (B2IF) is set (break 2 interrupt is pending).
+ * @rmtoll SR B2IF LL_TIM_IsActiveFlag_BRK2
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK2(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_B2IF) == (TIM_SR_B2IF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF).
+ * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set
+ * (Capture/Compare 1 interrupt is pending).
+ * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF).
+ * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set
+ * (Capture/Compare 2 over-capture interrupt is pending).
+ * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF).
+ * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set
+ * (Capture/Compare 3 over-capture interrupt is pending).
+ * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF).
+ * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF));
+}
+
+/**
+ * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set
+ * (Capture/Compare 4 over-capture interrupt is pending).
+ * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Clear the system break interrupt flag (SBIF).
+ * @rmtoll SR SBIF LL_TIM_ClearFlag_SYSBRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_ClearFlag_SYSBRK(TIM_TypeDef *TIMx)
+{
+ WRITE_REG(TIMx->SR, ~(TIM_SR_SBIF));
+}
+
+/**
+ * @brief Indicate whether system break interrupt flag (SBIF) is set (system break interrupt is pending).
+ * @rmtoll SR SBIF LL_TIM_IsActiveFlag_SYSBRK
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_SYSBRK(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->SR, TIM_SR_SBIF) == (TIM_SR_SBIF)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_IT_Management IT-Management
+ * @{
+ */
+/**
+ * @brief Enable update interrupt (UIE).
+ * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_UIE);
+}
+
+/**
+ * @brief Disable update interrupt (UIE).
+ * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE);
+}
+
+/**
+ * @brief Indicates whether the update interrupt (UIE) is enabled.
+ * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 1 interrupt (CC1IE).
+ * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC1IE);
+}
+
+/**
+ * @brief Disable capture/compare 1 interrupt (CC1IE).
+ * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled.
+ * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 2 interrupt (CC2IE).
+ * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC2IE);
+}
+
+/**
+ * @brief Disable capture/compare 2 interrupt (CC2IE).
+ * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled.
+ * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 3 interrupt (CC3IE).
+ * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC3IE);
+}
+
+/**
+ * @brief Disable capture/compare 3 interrupt (CC3IE).
+ * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled.
+ * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 4 interrupt (CC4IE).
+ * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC4IE);
+}
+
+/**
+ * @brief Disable capture/compare 4 interrupt (CC4IE).
+ * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled.
+ * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable commutation interrupt (COMIE).
+ * @rmtoll DIER COMIE LL_TIM_EnableIT_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_COMIE);
+}
+
+/**
+ * @brief Disable commutation interrupt (COMIE).
+ * @rmtoll DIER COMIE LL_TIM_DisableIT_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE);
+}
+
+/**
+ * @brief Indicates whether the commutation interrupt (COMIE) is enabled.
+ * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable trigger interrupt (TIE).
+ * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_TIE);
+}
+
+/**
+ * @brief Disable trigger interrupt (TIE).
+ * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE);
+}
+
+/**
+ * @brief Indicates whether the trigger interrupt (TIE) is enabled.
+ * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable break interrupt (BIE).
+ * @rmtoll DIER BIE LL_TIM_EnableIT_BRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_BIE);
+}
+
+/**
+ * @brief Disable break interrupt (BIE).
+ * @rmtoll DIER BIE LL_TIM_DisableIT_BRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE);
+}
+
+/**
+ * @brief Indicates whether the break interrupt (BIE) is enabled.
+ * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_DMA_Management DMA Management
+ * @{
+ */
+/**
+ * @brief Enable update DMA request (UDE).
+ * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_UDE);
+}
+
+/**
+ * @brief Disable update DMA request (UDE).
+ * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE);
+}
+
+/**
+ * @brief Indicates whether the update DMA request (UDE) is enabled.
+ * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 1 DMA request (CC1DE).
+ * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC1DE);
+}
+
+/**
+ * @brief Disable capture/compare 1 DMA request (CC1DE).
+ * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled.
+ * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 2 DMA request (CC2DE).
+ * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC2DE);
+}
+
+/**
+ * @brief Disable capture/compare 2 DMA request (CC2DE).
+ * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled.
+ * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 3 DMA request (CC3DE).
+ * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC3DE);
+}
+
+/**
+ * @brief Disable capture/compare 3 DMA request (CC3DE).
+ * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled.
+ * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable capture/compare 4 DMA request (CC4DE).
+ * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_CC4DE);
+}
+
+/**
+ * @brief Disable capture/compare 4 DMA request (CC4DE).
+ * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE);
+}
+
+/**
+ * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled.
+ * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable commutation DMA request (COMDE).
+ * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_COMDE);
+}
+
+/**
+ * @brief Disable commutation DMA request (COMDE).
+ * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE);
+}
+
+/**
+ * @brief Indicates whether the commutation DMA request (COMDE) is enabled.
+ * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL);
+}
+
+/**
+ * @brief Enable trigger interrupt (TDE).
+ * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->DIER, TIM_DIER_TDE);
+}
+
+/**
+ * @brief Disable trigger interrupt (TDE).
+ * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx)
+{
+ CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE);
+}
+
+/**
+ * @brief Indicates whether the trigger interrupt (TDE) is enabled.
+ * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG
+ * @param TIMx Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(const TIM_TypeDef *TIMx)
+{
+ return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management
+ * @{
+ */
+/**
+ * @brief Generate an update event.
+ * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_UG);
+}
+
+/**
+ * @brief Generate Capture/Compare 1 event.
+ * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_CC1G);
+}
+
+/**
+ * @brief Generate Capture/Compare 2 event.
+ * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_CC2G);
+}
+
+/**
+ * @brief Generate Capture/Compare 3 event.
+ * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_CC3G);
+}
+
+/**
+ * @brief Generate Capture/Compare 4 event.
+ * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_CC4G);
+}
+
+/**
+ * @brief Generate commutation event.
+ * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_COMG);
+}
+
+/**
+ * @brief Generate trigger event.
+ * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_TG);
+}
+
+/**
+ * @brief Generate break event.
+ * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_BG);
+}
+
+/**
+ * @brief Generate break 2 event.
+ * @rmtoll EGR B2G LL_TIM_GenerateEvent_BRK2
+ * @param TIMx Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_TIM_GenerateEvent_BRK2(TIM_TypeDef *TIMx)
+{
+ SET_BIT(TIMx->EGR, TIM_EGR_B2G);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions
+ * @{
+ */
+
+ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx);
+void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct);
+ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, const LL_TIM_InitTypeDef *TIM_InitStruct);
+void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct);
+ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct);
+void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct);
+ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct);
+void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct);
+ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, const LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct);
+void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct);
+ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, const LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct);
+void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct);
+ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, const LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* TIM1 || TIM8 || TIM2 || TIM3 || TIM4 || TIM5 || TIM15 || TIM16 || TIM17 || TIM6 || TIM7 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_LL_TIM_H */
diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c
new file mode 100644
index 0000000..2ce0df7
--- /dev/null
+++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim.c
@@ -0,0 +1,7902 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_tim.c
+ * @author MCD Application Team
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer (TIM) peripheral:
+ * + TIM Time Base Initialization
+ * + TIM Time Base Start
+ * + TIM Time Base Start Interruption
+ * + TIM Time Base Start DMA
+ * + TIM Output Compare/PWM Initialization
+ * + TIM Output Compare/PWM Channel Configuration
+ * + TIM Output Compare/PWM Start
+ * + TIM Output Compare/PWM Start Interruption
+ * + TIM Output Compare/PWM Start DMA
+ * + TIM Input Capture Initialization
+ * + TIM Input Capture Channel Configuration
+ * + TIM Input Capture Start
+ * + TIM Input Capture Start Interruption
+ * + TIM Input Capture Start DMA
+ * + TIM One Pulse Initialization
+ * + TIM One Pulse Channel Configuration
+ * + TIM One Pulse Start
+ * + TIM Encoder Interface Initialization
+ * + TIM Encoder Interface Start
+ * + TIM Encoder Interface Start Interruption
+ * + TIM Encoder Interface Start DMA
+ * + Commutation Event configuration with Interruption and DMA
+ * + TIM OCRef clear configuration
+ * + TIM External Clock configuration
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ @verbatim
+ ==============================================================================
+ ##### TIMER Generic features #####
+ ==============================================================================
+ [..] The Timer features include:
+ (#) 16-bit up, down, up/down auto-reload counter.
+ (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
+ counter clock frequency either by any factor between 1 and 65536.
+ (#) Up to 4 independent channels for:
+ (++) Input Capture
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+ (#) Synchronization circuit to control the timer with external signals and to interconnect
+ several timers together.
+ (#) Supports incremental encoder for positioning purposes
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending on the selected feature:
+ (++) Time Base : HAL_TIM_Base_MspInit()
+ (++) Input Capture : HAL_TIM_IC_MspInit()
+ (++) Output Compare : HAL_TIM_OC_MspInit()
+ (++) PWM generation : HAL_TIM_PWM_MspInit()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+ (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ Initialization function of this driver:
+ (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+ (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
+ Output Compare signal.
+ (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
+ PWM signal.
+ (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
+ external signal.
+ (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
+ in One Pulse Mode.
+ (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+
+ (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
+ (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+ (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+ (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+ (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+ (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+ (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+ (#) The DMA Burst is managed with the two following functions:
+ HAL_TIM_DMABurst_WriteStart()
+ HAL_TIM_DMABurst_ReadStart()
+
+ *** Callback registration ***
+ =============================================
+
+ [..]
+ The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+
+ [..]
+ Use Function HAL_TIM_RegisterCallback() to register a callback.
+ HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle,
+ the Callback ID and a pointer to the user callback function.
+
+ [..]
+ Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default
+ weak function.
+ HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle,
+ and the Callback ID.
+
+ [..]
+ These functions allow to register/unregister following callbacks:
+ (+) Base_MspInitCallback : TIM Base Msp Init Callback.
+ (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback.
+ (+) IC_MspInitCallback : TIM IC Msp Init Callback.
+ (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback.
+ (+) OC_MspInitCallback : TIM OC Msp Init Callback.
+ (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback.
+ (+) PWM_MspInitCallback : TIM PWM Msp Init Callback.
+ (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback.
+ (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback.
+ (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback.
+ (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback.
+ (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback.
+ (+) HallSensor_MspInitCallback : TIM Hall Sensor Msp Init Callback.
+ (+) HallSensor_MspDeInitCallback : TIM Hall Sensor Msp DeInit Callback.
+ (+) PeriodElapsedCallback : TIM Period Elapsed Callback.
+ (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback.
+ (+) TriggerCallback : TIM Trigger Callback.
+ (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback.
+ (+) IC_CaptureCallback : TIM Input Capture Callback.
+ (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback.
+ (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback.
+ (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback.
+ (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback.
+ (+) ErrorCallback : TIM Error Callback.
+ (+) CommutationCallback : TIM Commutation Callback.
+ (+) CommutationHalfCpltCallback : TIM Commutation half complete Callback.
+ (+) BreakCallback : TIM Break Callback.
+ (+) Break2Callback : TIM Break2 Callback.
+
+ [..]
+By default, after the Init and when the state is HAL_TIM_STATE_RESET
+all interrupt callbacks are set to the corresponding weak functions:
+ examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback().
+
+ [..]
+ Exception done for MspInit and MspDeInit functions that are reset to the legacy weak
+ functionalities in the Init / DeInit only when these callbacks are null
+ (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit
+ keep and use the user MspInit / MspDeInit callbacks(registered beforehand)
+
+ [..]
+ Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only.
+ Exception done MspInit / MspDeInit that can be registered / unregistered
+ in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state,
+ thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using HAL_TIM_RegisterCallback() before calling DeInit or Init function.
+
+ [..]
+ When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registration feature is not available and all callbacks
+ are set to the corresponding weak functions.
+
+ @endverbatim
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIM TIM
+ * @brief TIM HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+ * @{
+ */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config);
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter);
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ const TIM_SlaveConfigTypeDef *sSlaveConfig);
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions
+ * @brief Time Base functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Time Base functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM base.
+ (+) De-initialize the TIM base.
+ (+) Start the Time Base.
+ (+) Stop the Time Base.
+ (+) Start the Time Base and enable interrupt.
+ (+) Stop the Time Base and disable interrupt.
+ (+) Start the Time Base and enable DMA transfer.
+ (+) Stop the Time Base and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Time base Unit according to the specified
+ * parameters in the TIM_HandleTypeDef and initialize the associated handle.
+ * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+ * requires a timer reset to avoid unexpected direction
+ * due to DIR bit readonly in center aligned mode.
+ * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init()
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if (htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if (htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy weak callbacks */
+ TIM_ResetCallback(htim);
+
+ if (htim->Base_MspInitCallback == NULL)
+ {
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->Base_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the Time Base configuration */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+ /* Initialize the TIM channels state */
+ TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Initialize the TIM state*/
+ htim->State = HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Base peripheral
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if (htim->Base_MspDeInitCallback == NULL)
+ {
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->Base_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Base_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+ /* Change the TIM channels state */
+ TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Base MSP.
+ * @param htim TIM Base handle
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Base MSP.
+ * @param htim TIM Base handle
+ * @retval None
+ */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_Base_MspDeInit could be implemented in the user file
+ */
+}
+
+
+/**
+ * @brief Starts the TIM Base generation.
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Check the TIM state */
+ if (htim->State != HAL_TIM_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation.
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in interrupt mode.
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Check the TIM state */
+ if (htim->State != HAL_TIM_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Enable the TIM Update interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in interrupt mode.
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ /* Disable the TIM Update interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Base generation in DMA mode.
+ * @param htim TIM Base handle
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length)
+{
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ /* Set the TIM state */
+ if (htim->State == HAL_TIM_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (htim->State == HAL_TIM_STATE_READY)
+ {
+ if ((pData == NULL) || (Length == 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_BUSY;
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the DMA Period elapsed callbacks */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+
+ /* Enable the TIM Update DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Base generation in DMA mode.
+ * @param htim TIM Base handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions
+ * @brief TIM Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Output Compare.
+ (+) De-initialize the TIM Output Compare.
+ (+) Start the TIM Output Compare.
+ (+) Stop the TIM Output Compare.
+ (+) Start the TIM Output Compare and enable interrupt.
+ (+) Stop the TIM Output Compare and disable interrupt.
+ (+) Start the TIM Output Compare and enable DMA transfer.
+ (+) Stop the TIM Output Compare and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Output Compare according to the specified
+ * parameters in the TIM_HandleTypeDef and initializes the associated handle.
+ * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+ * requires a timer reset to avoid unexpected direction
+ * due to DIR bit readonly in center aligned mode.
+ * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init()
+ * @param htim TIM Output Compare handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if (htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if (htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy weak callbacks */
+ TIM_ResetCallback(htim);
+
+ if (htim->OC_MspInitCallback == NULL)
+ {
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->OC_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the Output Compare */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+ /* Initialize the TIM channels state */
+ TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Initialize the TIM state*/
+ htim->State = HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim TIM Output Compare handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if (htim->OC_MspDeInitCallback == NULL)
+ {
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->OC_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OC_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+ /* Change the TIM channels state */
+ TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Output Compare MSP.
+ * @param htim TIM Output Compare handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Output Compare MSP.
+ * @param htim TIM Output Compare handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_OC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Check the TIM channel state */
+ if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ /* Check the TIM channel state */
+ if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
+ uint16_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ /* Set the TIM channel state */
+ if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY)
+ {
+ if ((pData == NULL) || (Length == 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Enable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the Output compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions
+ * @brief TIM PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM PWM.
+ (+) De-initialize the TIM PWM.
+ (+) Start the TIM PWM.
+ (+) Stop the TIM PWM.
+ (+) Start the TIM PWM and enable interrupt.
+ (+) Stop the TIM PWM and disable interrupt.
+ (+) Start the TIM PWM and enable DMA transfer.
+ (+) Stop the TIM PWM and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM PWM Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and initializes the associated handle.
+ * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+ * requires a timer reset to avoid unexpected direction
+ * due to DIR bit readonly in center aligned mode.
+ * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init()
+ * @param htim TIM PWM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if (htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if (htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy weak callbacks */
+ TIM_ResetCallback(htim);
+
+ if (htim->PWM_MspInitCallback == NULL)
+ {
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->PWM_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the PWM */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+ /* Initialize the TIM channels state */
+ TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Initialize the TIM state*/
+ htim->State = HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim TIM PWM handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if (htim->PWM_MspDeInitCallback == NULL)
+ {
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->PWM_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_PWM_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+ /* Change the TIM channels state */
+ TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM PWM MSP.
+ * @param htim TIM PWM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM PWM MSP.
+ * @param htim TIM PWM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the PWM signal generation.
+ * @param htim TIM handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Check the TIM channel state */
+ if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation.
+ * @param htim TIM PWM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode.
+ * @param htim TIM PWM handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ /* Check the TIM channel state */
+ if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode.
+ * @param htim TIM PWM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode.
+ * @param htim TIM PWM handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
+ uint16_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ /* Set the TIM channel state */
+ if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY)
+ {
+ if ((pData == NULL) || (Length == 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Output Capture/Compare 3 request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode.
+ * @param htim TIM PWM handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions
+ * @brief TIM Input Capture functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Input Capture functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Input Capture.
+ (+) De-initialize the TIM Input Capture.
+ (+) Start the TIM Input Capture.
+ (+) Stop the TIM Input Capture.
+ (+) Start the TIM Input Capture and enable interrupt.
+ (+) Stop the TIM Input Capture and disable interrupt.
+ (+) Start the TIM Input Capture and enable DMA transfer.
+ (+) Stop the TIM Input Capture and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Input Capture Time base according to the specified
+ * parameters in the TIM_HandleTypeDef and initializes the associated handle.
+ * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+ * requires a timer reset to avoid unexpected direction
+ * due to DIR bit readonly in center aligned mode.
+ * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init()
+ * @param htim TIM Input Capture handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+ /* Check the TIM handle allocation */
+ if (htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if (htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy weak callbacks */
+ TIM_ResetCallback(htim);
+
+ if (htim->IC_MspInitCallback == NULL)
+ {
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->IC_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Init the base time for the input capture */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Initialize the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+ /* Initialize the TIM channels state */
+ TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Initialize the TIM state*/
+ htim->State = HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM peripheral
+ * @param htim TIM Input Capture handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if (htim->IC_MspDeInitCallback == NULL)
+ {
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->IC_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_IC_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+ /* Change the TIM channels state */
+ TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture MSP.
+ * @param htim TIM Input Capture handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Input Capture MSP.
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_IC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpsmcr;
+ HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ /* Check the TIM channel state */
+ if ((channel_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in interrupt mode.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ /* Check the TIM channel state */
+ if ((channel_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Enable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in interrupt mode.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Starts the TIM Input Capture measurement in DMA mode.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ /* Set the TIM channel state */
+ if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY)
+ || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY)
+ && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY))
+ {
+ if ((pData == NULL) || (Length == 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the TIM Input Capture measurement in DMA mode.
+ * @param htim TIM Input Capture handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_CHANNEL(htim->Instance, Channel));
+ assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Disable the TIM Capture/Compare 4 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return status;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions
+ * @brief TIM One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM One Pulse.
+ (+) De-initialize the TIM One Pulse.
+ (+) Start the TIM One Pulse.
+ (+) Stop the TIM One Pulse.
+ (+) Start the TIM One Pulse and enable interrupt.
+ (+) Stop the TIM One Pulse and disable interrupt.
+ (+) Start the TIM One Pulse and enable DMA transfer.
+ (+) Stop the TIM One Pulse and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM One Pulse Time Base according to the specified
+ * parameters in the TIM_HandleTypeDef and initializes the associated handle.
+ * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+ * requires a timer reset to avoid unexpected direction
+ * due to DIR bit readonly in center aligned mode.
+ * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init()
+ * @note When the timer instance is initialized in One Pulse mode, timer
+ * channels 1 and channel 2 are reserved and cannot be used for other
+ * purpose.
+ * @param htim TIM One Pulse handle
+ * @param OnePulseMode Select the One pulse mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+ * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+ /* Check the TIM handle allocation */
+ if (htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+ assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+
+ if (htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy weak callbacks */
+ TIM_ResetCallback(htim);
+
+ if (htim->OnePulse_MspInitCallback == NULL)
+ {
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->OnePulse_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_OnePulse_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the One Pulse Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Reset the OPM Bit */
+ htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+ /* Configure the OPM Mode */
+ htim->Instance->CR1 |= OnePulseMode;
+
+ /* Initialize the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+ /* Initialize the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Initialize the TIM state*/
+ htim->State = HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM One Pulse
+ * @param htim TIM One Pulse handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if (htim->OnePulse_MspDeInitCallback == NULL)
+ {
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->OnePulse_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_OnePulse_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse MSP.
+ * @param htim TIM One Pulse handle
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM One Pulse MSP.
+ * @param htim TIM One Pulse handle
+ * @retval None
+ */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel See note above
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Check the TIM channels state */
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel See note above
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel See note above
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Check the TIM channels state */
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+
+ No need to enable the counter, it's enabled automatically by hardware
+ (the counter starts in response to a stimulus and generate a pulse */
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Enable the main output */
+ __HAL_TIM_MOE_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel See note above
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(OutputChannel);
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the Capture compare and the Input Capture channels
+ (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+ if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+ if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
+ {
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions
+ * @brief TIM Encoder functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Encoder functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the TIM Encoder.
+ (+) De-initialize the TIM Encoder.
+ (+) Start the TIM Encoder.
+ (+) Stop the TIM Encoder.
+ (+) Start the TIM Encoder and enable interrupt.
+ (+) Stop the TIM Encoder and disable interrupt.
+ (+) Start the TIM Encoder and enable DMA transfer.
+ (+) Stop the TIM Encoder and disable DMA transfer.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Encoder Interface and initialize the associated handle.
+ * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse)
+ * requires a timer reset to avoid unexpected direction
+ * due to DIR bit readonly in center aligned mode.
+ * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init()
+ * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together
+ * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource
+ * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa
+ * @note When the timer instance is initialized in Encoder mode, timer
+ * channels 1 and channel 2 are reserved and cannot be used for other
+ * purpose.
+ * @param htim TIM Encoder Interface handle
+ * @param sConfig TIM Encoder Interface configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig)
+{
+ uint32_t tmpsmcr;
+ uint32_t tmpccmr1;
+ uint32_t tmpccer;
+
+ /* Check the TIM handle allocation */
+ if (htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+ assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+ assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+ assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
+
+ if (htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy weak callbacks */
+ TIM_ResetCallback(htim);
+
+ if (htim->Encoder_MspInitCallback == NULL)
+ {
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->Encoder_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIM_Encoder_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Reset the SMS and ECE bits */
+ htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE);
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = htim->Instance->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr |= sConfig->EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+ tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U));
+
+ /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+ tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+ tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+ tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U);
+ tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U);
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+ tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+ tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U);
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Write to TIMx CCMR1 */
+ htim->Instance->CCMR1 = tmpccmr1;
+
+ /* Write to TIMx CCER */
+ htim->Instance->CCER = tmpccer;
+
+ /* Initialize the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Initialize the TIM state*/
+ htim->State = HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief DeInitializes the TIM Encoder interface
+ * @param htim TIM Encoder Interface handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if (htim->Encoder_MspDeInitCallback == NULL)
+ {
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->Encoder_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIM_Encoder_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Encoder Interface MSP.
+ * @param htim TIM Encoder Interface handle
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Encoder Interface MSP.
+ * @param htim TIM Encoder Interface handle
+ * @retval None
+ */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Set the TIM channel(s) state */
+ if (Channel == TIM_CHANNEL_1)
+ {
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+
+ /* Enable the encoder interface channels */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ break;
+ }
+ }
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+ break;
+ }
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel(s) state */
+ if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2))
+ {
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in interrupt mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Set the TIM channel(s) state */
+ if (Channel == TIM_CHANNEL_1)
+ {
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+
+ /* Enable the encoder interface channels */
+ /* Enable the capture compare Interrupts 1 and/or 2 */
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ default :
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+ }
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in interrupt mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if (Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts 1 and 2 */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel(s) state */
+ if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2))
+ {
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Encoder Interface in DMA mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @param pData1 The destination Buffer address for IC1.
+ * @param pData2 The destination Buffer address for IC2.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1,
+ uint32_t *pData2, uint16_t Length)
+{
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Set the TIM channel(s) state */
+ if (Channel == TIM_CHANNEL_1)
+ {
+ if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
+ || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
+ && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY))
+ {
+ if ((pData1 == NULL) || (Length == 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)
+ || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY)
+ && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY))
+ {
+ if ((pData2 == NULL) || (Length == 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
+ || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)
+ || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
+ || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
+ && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY)
+ && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
+ && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY))
+ {
+ if ((((pData1 == NULL) || (pData2 == NULL))) || (Length == 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ break;
+ }
+
+ default:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ /* Enable the TIM Input Capture DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+
+ /* Enable the Capture compare channel */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral */
+ __HAL_TIM_ENABLE(htim);
+
+ break;
+ }
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Encoder Interface in DMA mode.
+ * @param htim TIM Encoder Interface handle
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1 and 2
+ (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
+ if (Channel == TIM_CHANNEL_1)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+ else
+ {
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare DMA Request 1 and 2 */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+ }
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel(s) state */
+ if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2))
+ {
+ TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief TIM IRQ handler management
+ *
+@verbatim
+ ==============================================================================
+ ##### IRQ handler management #####
+ ==============================================================================
+ [..]
+ This section provides Timer IRQ handler function.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief This function handles TIM interrupts requests.
+ * @param htim TIM handle
+ * @retval None
+ */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+ uint32_t itsource = htim->Instance->DIER;
+ uint32_t itflag = htim->Instance->SR;
+
+ /* Capture compare 1 event */
+ if ((itflag & (TIM_FLAG_CC1)) == (TIM_FLAG_CC1))
+ {
+ if ((itsource & (TIM_IT_CC1)) == (TIM_IT_CC1))
+ {
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC1);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ /* Input capture event */
+ if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ }
+ /* Capture compare 2 event */
+ if ((itflag & (TIM_FLAG_CC2)) == (TIM_FLAG_CC2))
+ {
+ if ((itsource & (TIM_IT_CC2)) == (TIM_IT_CC2))
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC2);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ /* Input capture event */
+ if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 3 event */
+ if ((itflag & (TIM_FLAG_CC3)) == (TIM_FLAG_CC3))
+ {
+ if ((itsource & (TIM_IT_CC3)) == (TIM_IT_CC3))
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC3);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ /* Input capture event */
+ if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* Capture compare 4 event */
+ if ((itflag & (TIM_FLAG_CC4)) == (TIM_FLAG_CC4))
+ {
+ if ((itsource & (TIM_IT_CC4)) == (TIM_IT_CC4))
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC4);
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ /* Input capture event */
+ if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U)
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ /* Output compare event */
+ else
+ {
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->OC_DelayElapsedCallback(htim);
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_OC_DelayElapsedCallback(htim);
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+ }
+ }
+ /* TIM Update event */
+ if ((itflag & (TIM_FLAG_UPDATE)) == (TIM_FLAG_UPDATE))
+ {
+ if ((itsource & (TIM_IT_UPDATE)) == (TIM_IT_UPDATE))
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_UPDATE);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PeriodElapsedCallback(htim);
+#else
+ HAL_TIM_PeriodElapsedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+ /* TIM Break input event */
+ if (((itflag & (TIM_FLAG_BREAK)) == (TIM_FLAG_BREAK)) || \
+ ((itflag & (TIM_FLAG_SYSTEM_BREAK)) == (TIM_FLAG_SYSTEM_BREAK)))
+ {
+ if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK))
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK | TIM_FLAG_SYSTEM_BREAK);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->BreakCallback(htim);
+#else
+ HAL_TIMEx_BreakCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+ /* TIM Break2 input event */
+ if ((itflag & (TIM_FLAG_BREAK2)) == (TIM_FLAG_BREAK2))
+ {
+ if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK))
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK2);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->Break2Callback(htim);
+#else
+ HAL_TIMEx_Break2Callback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+ /* TIM Trigger detection event */
+ if ((itflag & (TIM_FLAG_TRIGGER)) == (TIM_FLAG_TRIGGER))
+ {
+ if ((itsource & (TIM_IT_TRIGGER)) == (TIM_IT_TRIGGER))
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TRIGGER);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->TriggerCallback(htim);
+#else
+ HAL_TIM_TriggerCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+ /* TIM commutation event */
+ if ((itflag & (TIM_FLAG_COM)) == (TIM_FLAG_COM))
+ {
+ if ((itsource & (TIM_IT_COM)) == (TIM_IT_COM))
+ {
+ __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_COM);
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->CommutationCallback(htim);
+#else
+ HAL_TIMEx_CommutCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions
+ * @brief TIM Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
+ (+) Configure External Clock source.
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master and the Slave synchronization.
+ (+) Configure the DMA Burst Mode.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TIM Output Compare Channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM Output Compare handle
+ * @param sConfig TIM Output Compare configuration structure
+ * @param Channel TIM Channels to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim,
+ const TIM_OC_InitTypeDef *sConfig,
+ uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 1 in Output Compare */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 2 in Output Compare */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 3 in Output Compare */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 4 in Output Compare */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+ break;
+ }
+
+ case TIM_CHANNEL_5:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 5 in Output Compare */
+ TIM_OC5_SetConfig(htim->Instance, sConfig);
+ break;
+ }
+
+ case TIM_CHANNEL_6:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
+
+ /* Configure the TIM Channel 6 in Output Compare */
+ TIM_OC6_SetConfig(htim->Instance, sConfig);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+
+ return status;
+}
+
+/**
+ * @brief Initializes the TIM Input Capture Channels according to the specified
+ * parameters in the TIM_IC_InitTypeDef.
+ * @param htim TIM IC handle
+ * @param sConfig TIM Input Capture configuration structure
+ * @param Channel TIM Channel to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+ assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ if (Channel == TIM_CHANNEL_1)
+ {
+ /* TI1 Configuration */
+ TIM_TI1_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+ }
+ else if (Channel == TIM_CHANNEL_2)
+ {
+ /* TI2 Configuration */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Set the IC2PSC value */
+ htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U);
+ }
+ else if (Channel == TIM_CHANNEL_3)
+ {
+ /* TI3 Configuration */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ TIM_TI3_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC3PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+ /* Set the IC3PSC value */
+ htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+ }
+ else if (Channel == TIM_CHANNEL_4)
+ {
+ /* TI4 Configuration */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ TIM_TI4_SetConfig(htim->Instance,
+ sConfig->ICPolarity,
+ sConfig->ICSelection,
+ sConfig->ICFilter);
+
+ /* Reset the IC4PSC Bits */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+ /* Set the IC4PSC value */
+ htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U);
+ }
+ else
+ {
+ status = HAL_ERROR;
+ }
+
+ __HAL_UNLOCK(htim);
+
+ return status;
+}
+
+/**
+ * @brief Initializes the TIM PWM channels according to the specified
+ * parameters in the TIM_OC_InitTypeDef.
+ * @param htim TIM PWM handle
+ * @param sConfig TIM PWM configuration structure
+ * @param Channel TIM Channels to be configured
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim,
+ const TIM_OC_InitTypeDef *sConfig,
+ uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CHANNELS(Channel));
+ assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+ assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+ assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 1 in PWM mode */
+ TIM_OC1_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel1 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode;
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 2 in PWM mode */
+ TIM_OC2_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel2 */
+ htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+ htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U;
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 3 in PWM mode */
+ TIM_OC3_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel3 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode;
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 4 in PWM mode */
+ TIM_OC4_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel4 */
+ htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+ htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U;
+ break;
+ }
+
+ case TIM_CHANNEL_5:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC5_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 5 in PWM mode */
+ TIM_OC5_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel5*/
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE;
+ htim->Instance->CCMR3 |= sConfig->OCFastMode;
+ break;
+ }
+
+ case TIM_CHANNEL_6:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC6_INSTANCE(htim->Instance));
+
+ /* Configure the Channel 6 in PWM mode */
+ TIM_OC6_SetConfig(htim->Instance, sConfig);
+
+ /* Set the Preload enable bit for channel6 */
+ htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE;
+
+ /* Configure the Output Fast mode */
+ htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE;
+ htim->Instance->CCMR3 |= sConfig->OCFastMode << 8U;
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+
+ return status;
+}
+
+/**
+ * @brief Initializes the TIM One Pulse Channels according to the specified
+ * parameters in the TIM_OnePulse_InitTypeDef.
+ * @param htim TIM One Pulse handle
+ * @param sConfig TIM One Pulse configuration structure
+ * @param OutputChannel TIM output channel to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param InputChannel TIM input Channel to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @note To output a waveform with a minimum delay user can enable the fast
+ * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx
+ * output is forced in response to the edge detection on TIx input,
+ * without taking in account the comparison.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig,
+ uint32_t OutputChannel, uint32_t InputChannel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ TIM_OC_InitTypeDef temp1;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+ assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+ if (OutputChannel != InputChannel)
+ {
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Extract the Output compare configuration from sConfig structure */
+ temp1.OCMode = sConfig->OCMode;
+ temp1.Pulse = sConfig->Pulse;
+ temp1.OCPolarity = sConfig->OCPolarity;
+ temp1.OCNPolarity = sConfig->OCNPolarity;
+ temp1.OCIdleState = sConfig->OCIdleState;
+ temp1.OCNIdleState = sConfig->OCNIdleState;
+
+ switch (OutputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_OC1_SetConfig(htim->Instance, &temp1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_OC2_SetConfig(htim->Instance, &temp1);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ switch (InputChannel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1FP1;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+ sConfig->ICSelection, sConfig->ICFilter);
+
+ /* Reset the IC2PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+ /* Select the Trigger source */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI2FP2;
+
+ /* Select the Slave Mode */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return status;
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_OR1
+ * @arg TIM_DMABASE_CCMR3
+ * @arg TIM_DMABASE_CCR5
+ * @arg TIM_DMABASE_CCR6
+ * @arg TIM_DMABASE_OR2
+ * @arg TIM_DMABASE_OR3
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @note This function should be used only when BurstLength is equal to DMA data transfer length.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, const uint32_t *BurstBuffer,
+ uint32_t BurstLength)
+{
+ HAL_StatusTypeDef status;
+
+ status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength,
+ ((BurstLength) >> 8U) + 1U);
+
+
+
+ return status;
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_OR1
+ * @arg TIM_DMABASE_CCMR3
+ * @arg TIM_DMABASE_CCR5
+ * @arg TIM_DMABASE_CCR6
+ * @arg TIM_DMABASE_OR2
+ * @arg TIM_DMABASE_OR3
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @param DataLength Data length. This parameter can be one value
+ * between 1 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, const uint32_t *BurstBuffer,
+ uint32_t BurstLength, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+ assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength));
+
+ if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY)
+ {
+ if ((BurstBuffer == NULL) && (BurstLength > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY;
+ }
+ }
+ else
+ {
+ /* nothing to do */
+ }
+
+ switch (BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callbacks */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer,
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer,
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer,
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer,
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
+ htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer,
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA commutation callbacks */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer,
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA trigger callbacks */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer,
+ (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Configure the DMA Burst Mode */
+ htim->Instance->DCR = (BurstBaseAddress | BurstLength);
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the TIM DMA Burst mode
+ * @param htim TIM handle
+ * @param BurstRequestSrc TIM DMA Request sources to disable
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch (BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]);
+ break;
+ }
+ case TIM_DMA_CC1:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+ break;
+ }
+ case TIM_DMA_CC2:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+ break;
+ }
+ case TIM_DMA_CC3:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+ break;
+ }
+ case TIM_DMA_CC4:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
+ break;
+ }
+ case TIM_DMA_COM:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ break;
+ }
+ case TIM_DMA_TRIGGER:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ break;
+ }
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Change the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_OR1
+ * @arg TIM_DMABASE_CCMR3
+ * @arg TIM_DMABASE_CCR5
+ * @arg TIM_DMABASE_CCR6
+ * @arg TIM_DMABASE_OR2
+ * @arg TIM_DMABASE_OR3
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @note This function should be used only when BurstLength is equal to DMA data transfer length.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength)
+{
+ HAL_StatusTypeDef status;
+
+ status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength,
+ ((BurstLength) >> 8U) + 1U);
+
+
+ return status;
+}
+
+/**
+ * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
+ * @param htim TIM handle
+ * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABASE_CR1
+ * @arg TIM_DMABASE_CR2
+ * @arg TIM_DMABASE_SMCR
+ * @arg TIM_DMABASE_DIER
+ * @arg TIM_DMABASE_SR
+ * @arg TIM_DMABASE_EGR
+ * @arg TIM_DMABASE_CCMR1
+ * @arg TIM_DMABASE_CCMR2
+ * @arg TIM_DMABASE_CCER
+ * @arg TIM_DMABASE_CNT
+ * @arg TIM_DMABASE_PSC
+ * @arg TIM_DMABASE_ARR
+ * @arg TIM_DMABASE_RCR
+ * @arg TIM_DMABASE_CCR1
+ * @arg TIM_DMABASE_CCR2
+ * @arg TIM_DMABASE_CCR3
+ * @arg TIM_DMABASE_CCR4
+ * @arg TIM_DMABASE_BDTR
+ * @arg TIM_DMABASE_OR1
+ * @arg TIM_DMABASE_CCMR3
+ * @arg TIM_DMABASE_CCR5
+ * @arg TIM_DMABASE_CCR6
+ * @arg TIM_DMABASE_OR2
+ * @arg TIM_DMABASE_OR3
+ * @param BurstRequestSrc TIM DMA Request sources
+ * This parameter can be one of the following values:
+ * @arg TIM_DMA_UPDATE: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+ * @param BurstBuffer The Buffer address.
+ * @param BurstLength DMA Burst length. This parameter can be one value
+ * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+ * @param DataLength Data length. This parameter can be one value
+ * between 1 and 0xFFFF.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer,
+ uint32_t BurstLength, uint32_t DataLength)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+ assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+ assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength));
+
+ if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY)
+ {
+ if ((BurstBuffer == NULL) && (BurstLength > 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY;
+ }
+ }
+ else
+ {
+ /* nothing to do */
+ }
+ switch (BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ /* Set the DMA Period elapsed callbacks */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+ DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_CC1:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+ DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_CC2:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+ DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_CC3:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+ DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_CC4:
+ {
+ /* Set the DMA capture callbacks */
+ htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+ DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_COM:
+ {
+ /* Set the DMA commutation callbacks */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+ DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ case TIM_DMA_TRIGGER:
+ {
+ /* Set the DMA trigger callbacks */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer,
+ DataLength) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ break;
+ }
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Configure the DMA Burst Mode */
+ htim->Instance->DCR = (BurstBaseAddress | BurstLength);
+
+ /* Enable the TIM DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stop the DMA burst reading
+ * @param htim TIM handle
+ * @param BurstRequestSrc TIM DMA Request sources to disable.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+
+ /* Abort the DMA transfer (at least disable the DMA channel) */
+ switch (BurstRequestSrc)
+ {
+ case TIM_DMA_UPDATE:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]);
+ break;
+ }
+ case TIM_DMA_CC1:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+ break;
+ }
+ case TIM_DMA_CC2:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+ break;
+ }
+ case TIM_DMA_CC3:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+ break;
+ }
+ case TIM_DMA_CC4:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]);
+ break;
+ }
+ case TIM_DMA_COM:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+ break;
+ }
+ case TIM_DMA_TRIGGER:
+ {
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]);
+ break;
+ }
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the TIM Update DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+
+ /* Change the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Generate a software event
+ * @param htim TIM handle
+ * @param EventSource specifies the event source.
+ * This parameter can be one of the following values:
+ * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+ * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EVENTSOURCE_COM: Timer COM event source
+ * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+ * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+ * @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source
+ * @note Basic timers can only generate an update event.
+ * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances.
+ * @note TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are relevant
+ * only for timer instances supporting break input(s).
+ * @retval HAL status
+ */
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Set the event sources */
+ htim->Instance->EGR = EventSource;
+
+ /* Change the TIM state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the OCRef clear feature
+ * @param htim TIM handle
+ * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
+ * contains the OCREF clear feature and parameters for the TIM peripheral.
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @arg TIM_CHANNEL_4: TIM Channel 4
+ * @arg TIM_CHANNEL_5: TIM Channel 5
+ * @arg TIM_CHANNEL_6: TIM Channel 6
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim,
+ const TIM_ClearInputConfigTypeDef *sClearInputConfig,
+ uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ switch (sClearInputConfig->ClearInputSource)
+ {
+ case TIM_CLEARINPUTSOURCE_NONE:
+ {
+ /* Clear the OCREF clear selection bit and the the ETR Bits */
+ CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP));
+ break;
+ }
+ case TIM_CLEARINPUTSOURCE_OCREFCLR:
+ {
+ /* Clear the OCREF clear selection bit */
+ CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS);
+ break;
+ }
+
+ case TIM_CLEARINPUTSOURCE_ETR:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+ assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+ assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+
+ /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */
+ if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1)
+ {
+ htim->State = HAL_TIM_STATE_READY;
+ __HAL_UNLOCK(htim);
+ return HAL_ERROR;
+ }
+
+ TIM_ETR_SetConfig(htim->Instance,
+ sClearInputConfig->ClearInputPrescaler,
+ sClearInputConfig->ClearInputPolarity,
+ sClearInputConfig->ClearInputFilter);
+
+ /* Set the OCREF clear selection bit */
+ SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
+ {
+ /* Enable the OCREF clear feature for Channel 1 */
+ SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE);
+ }
+ else
+ {
+ /* Disable the OCREF clear feature for Channel 1 */
+ CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE);
+ }
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
+ {
+ /* Enable the OCREF clear feature for Channel 2 */
+ SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE);
+ }
+ else
+ {
+ /* Disable the OCREF clear feature for Channel 2 */
+ CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE);
+ }
+ break;
+ }
+ case TIM_CHANNEL_3:
+ {
+ if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
+ {
+ /* Enable the OCREF clear feature for Channel 3 */
+ SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE);
+ }
+ else
+ {
+ /* Disable the OCREF clear feature for Channel 3 */
+ CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE);
+ }
+ break;
+ }
+ case TIM_CHANNEL_4:
+ {
+ if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
+ {
+ /* Enable the OCREF clear feature for Channel 4 */
+ SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE);
+ }
+ else
+ {
+ /* Disable the OCREF clear feature for Channel 4 */
+ CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE);
+ }
+ break;
+ }
+ case TIM_CHANNEL_5:
+ {
+ if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
+ {
+ /* Enable the OCREF clear feature for Channel 5 */
+ SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE);
+ }
+ else
+ {
+ /* Disable the OCREF clear feature for Channel 5 */
+ CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC5CE);
+ }
+ break;
+ }
+ case TIM_CHANNEL_6:
+ {
+ if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE)
+ {
+ /* Enable the OCREF clear feature for Channel 6 */
+ SET_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE);
+ }
+ else
+ {
+ /* Disable the OCREF clear feature for Channel 6 */
+ CLEAR_BIT(htim->Instance->CCMR3, TIM_CCMR3_OC6CE);
+ }
+ break;
+ }
+ default:
+ break;
+ }
+ }
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return status;
+}
+
+/**
+ * @brief Configures the clock source to be used
+ * @param htim TIM handle
+ * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that
+ * contains the clock source information for the TIM peripheral.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+
+ /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+ tmpsmcr = htim->Instance->SMCR;
+ tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+ htim->Instance->SMCR = tmpsmcr;
+
+ switch (sClockSourceConfig->ClockSource)
+ {
+ case TIM_CLOCKSOURCE_INTERNAL:
+ {
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+ break;
+ }
+
+ case TIM_CLOCKSOURCE_ETRMODE1:
+ {
+ /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+
+ /* Check ETR input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+
+ /* Select the External clock mode1 and the ETRF trigger */
+ tmpsmcr = htim->Instance->SMCR;
+ tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ break;
+ }
+
+ case TIM_CLOCKSOURCE_ETRMODE2:
+ {
+ /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance));
+
+ /* Check ETR input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sClockSourceConfig->ClockPrescaler,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ /* Enable the External clock mode2 */
+ htim->Instance->SMCR |= TIM_SMCR_ECE;
+ break;
+ }
+
+ case TIM_CLOCKSOURCE_TI1:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 */
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+ break;
+ }
+
+ case TIM_CLOCKSOURCE_TI2:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI2 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+ break;
+ }
+
+ case TIM_CLOCKSOURCE_TI1ED:
+ {
+ /* Check whether or not the timer instance supports external clock mode 1 */
+ assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+
+ /* Check TI1 input conditioning related parameters */
+ assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+ assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sClockSourceConfig->ClockPolarity,
+ sClockSourceConfig->ClockFilter);
+ TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+ break;
+ }
+
+ case TIM_CLOCKSOURCE_ITR0:
+ case TIM_CLOCKSOURCE_ITR1:
+ case TIM_CLOCKSOURCE_ITR2:
+ case TIM_CLOCKSOURCE_ITR3:
+ {
+ /* Check whether or not the timer instance supports internal trigger input */
+ assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+
+ TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return status;
+}
+
+/**
+ * @brief Selects the signal connected to the TI1 input: direct from CH1_input
+ * or a XOR combination between CH1_input, CH2_input & CH3_input
+ * @param htim TIM handle.
+ * @param TI1_Selection Indicate whether or not channel 1 is connected to the
+ * output of a XOR gate.
+ * This parameter can be one of the following values:
+ * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+ * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+ * pins are connected to the TI1 input (XOR combination)
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+ uint32_t tmpcr2;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Reset the TI1 selection */
+ tmpcr2 &= ~TIM_CR2_TI1S;
+
+ /* Set the TI1 selection */
+ tmpcr2 |= TI1_Selection;
+
+ /* Write to TIMxCR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode
+ * @param htim TIM handle.
+ * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the Slave mode
+ * (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK)
+ {
+ htim->State = HAL_TIM_STATE_READY;
+ __HAL_UNLOCK(htim);
+ return HAL_ERROR;
+ }
+
+ /* Disable Trigger Interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in Slave mode in interrupt mode
+ * @param htim TIM handle.
+ * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that
+ * contains the selected trigger (internal trigger input, filtered
+ * timer input or external trigger input) and the Slave mode
+ * (Disable, Reset, Gated, Trigger, External clock mode 1).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim,
+ const TIM_SlaveConfigTypeDef *sSlaveConfig)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+ assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK)
+ {
+ htim->State = HAL_TIM_STATE_READY;
+ __HAL_UNLOCK(htim);
+ return HAL_ERROR;
+ }
+
+ /* Enable Trigger Interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+
+ /* Disable Trigger DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read the captured value from Capture Compare unit
+ * @param htim TIM handle.
+ * @param Channel TIM Channels to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @retval Captured value
+ */
+uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpreg = 0U;
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+
+ /* Return the capture 1 value */
+ tmpreg = htim->Instance->CCR1;
+
+ break;
+ }
+ case TIM_CHANNEL_2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+
+ /* Return the capture 2 value */
+ tmpreg = htim->Instance->CCR2;
+
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+
+ /* Return the capture 3 value */
+ tmpreg = htim->Instance->CCR3;
+
+ break;
+ }
+
+ case TIM_CHANNEL_4:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+
+ /* Return the capture 4 value */
+ tmpreg = htim->Instance->CCR4;
+
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ return tmpreg;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### TIM Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides TIM callback functions:
+ (+) TIM Period elapsed callback
+ (+) TIM Output Compare callback
+ (+) TIM Input capture callback
+ (+) TIM Trigger callback
+ (+) TIM Error callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Period elapsed callback in non-blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Period elapsed half complete callback in non-blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Output Compare callback in non-blocking mode
+ * @param htim TIM OC handle
+ * @retval None
+ */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Input Capture callback in non-blocking mode
+ * @param htim TIM IC handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_IC_CaptureCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Input Capture half complete callback in non-blocking mode
+ * @param htim TIM IC handle
+ * @retval None
+ */
+__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PWM Pulse finished callback in non-blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief PWM Pulse finished half complete callback in non-blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Trigger detection callback in non-blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_TriggerCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Hall Trigger detection half complete callback in non-blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Timer error callback in non-blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIM_ErrorCallback could be implemented in the user file
+ */
+}
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Register a User TIM callback to be used instead of the weak predefined callback
+ * @param htim tim handle
+ * @param CallbackID ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID
+ * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID
+ * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID
+ * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID
+ * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID
+ * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID
+ * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID
+ * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID
+ * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID
+ * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID
+ * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID
+ * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID
+ * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID
+ * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID
+ * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID
+ * @param pCallback pointer to the callback function
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID,
+ pTIM_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if (pCallback == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ if (htim->State == HAL_TIM_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ htim->Base_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ htim->Base_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ htim->IC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ htim->IC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ htim->OC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ htim->OC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ htim->PWM_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ htim->PWM_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ htim->OnePulse_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ htim->OnePulse_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ htim->Encoder_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ htim->Encoder_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ htim->HallSensor_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ htim->HallSensor_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PERIOD_ELAPSED_CB_ID :
+ htim->PeriodElapsedCallback = pCallback;
+ break;
+
+ case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID :
+ htim->PeriodElapsedHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_TIM_TRIGGER_CB_ID :
+ htim->TriggerCallback = pCallback;
+ break;
+
+ case HAL_TIM_TRIGGER_HALF_CB_ID :
+ htim->TriggerHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_CAPTURE_CB_ID :
+ htim->IC_CaptureCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_CAPTURE_HALF_CB_ID :
+ htim->IC_CaptureHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
+ htim->OC_DelayElapsedCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
+ htim->PWM_PulseFinishedCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID :
+ htim->PWM_PulseFinishedHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_TIM_ERROR_CB_ID :
+ htim->ErrorCallback = pCallback;
+ break;
+
+ case HAL_TIM_COMMUTATION_CB_ID :
+ htim->CommutationCallback = pCallback;
+ break;
+
+ case HAL_TIM_COMMUTATION_HALF_CB_ID :
+ htim->CommutationHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_TIM_BREAK_CB_ID :
+ htim->BreakCallback = pCallback;
+ break;
+
+ case HAL_TIM_BREAK2_CB_ID :
+ htim->Break2Callback = pCallback;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (htim->State == HAL_TIM_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ htim->Base_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ htim->Base_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ htim->IC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ htim->IC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ htim->OC_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ htim->OC_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ htim->PWM_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ htim->PWM_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ htim->OnePulse_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ htim->OnePulse_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ htim->Encoder_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ htim->Encoder_MspDeInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ htim->HallSensor_MspInitCallback = pCallback;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ htim->HallSensor_MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Unregister a TIM callback
+ * TIM callback is redirected to the weak predefined callback
+ * @param htim tim handle
+ * @param CallbackID ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID
+ * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID
+ * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID
+ * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID
+ * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID
+ * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID
+ * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID Hall Sensor MspInit Callback ID
+ * @arg @ref HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID Hall Sensor MspDeInit Callback ID
+ * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID
+ * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID
+ * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID
+ * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID
+ * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID
+ * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID
+ * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID
+ * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID
+ * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID
+ * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID
+ * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID
+ * @arg @ref HAL_TIM_COMMUTATION_HALF_CB_ID Commutation half complete Callback ID
+ * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID
+ * @arg @ref HAL_TIM_BREAK2_CB_ID Break2 Callback ID
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if (htim->State == HAL_TIM_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ /* Legacy weak Base MspInit Callback */
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ /* Legacy weak Base Msp DeInit Callback */
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ /* Legacy weak IC Msp Init Callback */
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ /* Legacy weak IC Msp DeInit Callback */
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ /* Legacy weak OC Msp Init Callback */
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ /* Legacy weak OC Msp DeInit Callback */
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ /* Legacy weak PWM Msp Init Callback */
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ /* Legacy weak PWM Msp DeInit Callback */
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ /* Legacy weak One Pulse Msp Init Callback */
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ /* Legacy weak One Pulse Msp DeInit Callback */
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ /* Legacy weak Encoder Msp Init Callback */
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ /* Legacy weak Encoder Msp DeInit Callback */
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ /* Legacy weak Hall Sensor Msp Init Callback */
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ /* Legacy weak Hall Sensor Msp DeInit Callback */
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
+ break;
+
+ case HAL_TIM_PERIOD_ELAPSED_CB_ID :
+ /* Legacy weak Period Elapsed Callback */
+ htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback;
+ break;
+
+ case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID :
+ /* Legacy weak Period Elapsed half complete Callback */
+ htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback;
+ break;
+
+ case HAL_TIM_TRIGGER_CB_ID :
+ /* Legacy weak Trigger Callback */
+ htim->TriggerCallback = HAL_TIM_TriggerCallback;
+ break;
+
+ case HAL_TIM_TRIGGER_HALF_CB_ID :
+ /* Legacy weak Trigger half complete Callback */
+ htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback;
+ break;
+
+ case HAL_TIM_IC_CAPTURE_CB_ID :
+ /* Legacy weak IC Capture Callback */
+ htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback;
+ break;
+
+ case HAL_TIM_IC_CAPTURE_HALF_CB_ID :
+ /* Legacy weak IC Capture half complete Callback */
+ htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback;
+ break;
+
+ case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
+ /* Legacy weak OC Delay Elapsed Callback */
+ htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback;
+ break;
+
+ case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
+ /* Legacy weak PWM Pulse Finished Callback */
+ htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback;
+ break;
+
+ case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID :
+ /* Legacy weak PWM Pulse Finished half complete Callback */
+ htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback;
+ break;
+
+ case HAL_TIM_ERROR_CB_ID :
+ /* Legacy weak Error Callback */
+ htim->ErrorCallback = HAL_TIM_ErrorCallback;
+ break;
+
+ case HAL_TIM_COMMUTATION_CB_ID :
+ /* Legacy weak Commutation Callback */
+ htim->CommutationCallback = HAL_TIMEx_CommutCallback;
+ break;
+
+ case HAL_TIM_COMMUTATION_HALF_CB_ID :
+ /* Legacy weak Commutation half complete Callback */
+ htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback;
+ break;
+
+ case HAL_TIM_BREAK_CB_ID :
+ /* Legacy weak Break Callback */
+ htim->BreakCallback = HAL_TIMEx_BreakCallback;
+ break;
+
+ case HAL_TIM_BREAK2_CB_ID :
+ /* Legacy weak Break2 Callback */
+ htim->Break2Callback = HAL_TIMEx_Break2Callback;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (htim->State == HAL_TIM_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_TIM_BASE_MSPINIT_CB_ID :
+ /* Legacy weak Base MspInit Callback */
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
+ break;
+
+ case HAL_TIM_BASE_MSPDEINIT_CB_ID :
+ /* Legacy weak Base Msp DeInit Callback */
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
+ break;
+
+ case HAL_TIM_IC_MSPINIT_CB_ID :
+ /* Legacy weak IC Msp Init Callback */
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
+ break;
+
+ case HAL_TIM_IC_MSPDEINIT_CB_ID :
+ /* Legacy weak IC Msp DeInit Callback */
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
+ break;
+
+ case HAL_TIM_OC_MSPINIT_CB_ID :
+ /* Legacy weak OC Msp Init Callback */
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
+ break;
+
+ case HAL_TIM_OC_MSPDEINIT_CB_ID :
+ /* Legacy weak OC Msp DeInit Callback */
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
+ break;
+
+ case HAL_TIM_PWM_MSPINIT_CB_ID :
+ /* Legacy weak PWM Msp Init Callback */
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
+ break;
+
+ case HAL_TIM_PWM_MSPDEINIT_CB_ID :
+ /* Legacy weak PWM Msp DeInit Callback */
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
+ /* Legacy weak One Pulse Msp Init Callback */
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
+ break;
+
+ case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
+ /* Legacy weak One Pulse Msp DeInit Callback */
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
+ break;
+
+ case HAL_TIM_ENCODER_MSPINIT_CB_ID :
+ /* Legacy weak Encoder Msp Init Callback */
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
+ break;
+
+ case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
+ /* Legacy weak Encoder Msp DeInit Callback */
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
+ /* Legacy weak Hall Sensor Msp Init Callback */
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
+ break;
+
+ case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
+ /* Legacy weak Hall Sensor Msp DeInit Callback */
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ return status;
+}
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions
+ * @brief TIM Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Base handle state.
+ * @param htim TIM Base handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM OC handle state.
+ * @param htim TIM Output Compare handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM PWM handle state.
+ * @param htim TIM handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Input Capture handle state.
+ * @param htim TIM IC handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM One Pulse Mode handle state.
+ * @param htim TIM OPM handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Encoder Mode handle state.
+ * @param htim TIM Encoder Interface handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return the TIM Encoder Mode handle state.
+ * @param htim TIM handle
+ * @retval Active channel
+ */
+HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim)
+{
+ return htim->Channel;
+}
+
+/**
+ * @brief Return actual state of the TIM channel.
+ * @param htim TIM handle
+ * @param Channel TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @arg TIM_CHANNEL_4: TIM Channel 4
+ * @arg TIM_CHANNEL_5: TIM Channel 5
+ * @arg TIM_CHANNEL_6: TIM Channel 6
+ * @retval TIM Channel state
+ */
+HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_TIM_ChannelStateTypeDef channel_state;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+ channel_state = TIM_CHANNEL_STATE_GET(htim, Channel);
+
+ return channel_state;
+}
+
+/**
+ * @brief Return actual state of a DMA burst operation.
+ * @param htim TIM handle
+ * @retval DMA burst state
+ */
+HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+
+ return htim->DMABurstState;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Private_Functions TIM Private Functions
+ * @{
+ */
+
+/**
+ * @brief TIM DMA error callback
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ else
+ {
+ htim->State = HAL_TIM_STATE_READY;
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->ErrorCallback(htim);
+#else
+ HAL_TIM_ErrorCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA Delay Pulse complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else
+ {
+ /* nothing to do */
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA Delay Pulse half complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+ else
+ {
+ /* nothing to do */
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PWM_PulseFinishedHalfCpltCallback(htim);
+#else
+ HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA Capture complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else
+ {
+ /* nothing to do */
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureCallback(htim);
+#else
+ HAL_TIM_IC_CaptureCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA Capture half complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+ }
+ else
+ {
+ /* nothing to do */
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->IC_CaptureHalfCpltCallback(htim);
+#else
+ HAL_TIM_IC_CaptureHalfCpltCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA Period Elapse complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL)
+ {
+ htim->State = HAL_TIM_STATE_READY;
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PeriodElapsedCallback(htim);
+#else
+ HAL_TIM_PeriodElapsedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief TIM DMA Period Elapse half complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PeriodElapsedHalfCpltCallback(htim);
+#else
+ HAL_TIM_PeriodElapsedHalfCpltCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief TIM DMA Trigger callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL)
+ {
+ htim->State = HAL_TIM_STATE_READY;
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->TriggerCallback(htim);
+#else
+ HAL_TIM_TriggerCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief TIM DMA Trigger half complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->TriggerHalfCpltCallback(htim);
+#else
+ HAL_TIM_TriggerHalfCpltCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief Time Base configuration
+ * @param TIMx TIM peripheral
+ * @param Structure TIM Base configuration structure
+ * @retval None
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure)
+{
+ uint32_t tmpcr1;
+ tmpcr1 = TIMx->CR1;
+
+ /* Set TIM Time Base Unit parameters ---------------------------------------*/
+ if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx))
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+ tmpcr1 |= Structure->CounterMode;
+ }
+
+ if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx))
+ {
+ /* Set the clock division */
+ tmpcr1 &= ~TIM_CR1_CKD;
+ tmpcr1 |= (uint32_t)Structure->ClockDivision;
+ }
+
+ /* Set the auto-reload preload */
+ MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload);
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Autoreload value */
+ TIMx->ARR = (uint32_t)Structure->Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = Structure->Prescaler;
+
+ if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx))
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = Structure->RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler
+ and the repetition counter (only for advanced timer) value immediately */
+ TIMx->EGR = TIM_EGR_UG;
+
+ /* Check if the update flag is set after the Update Generation, if so clear the UIF flag */
+ if (HAL_IS_BIT_SET(TIMx->SR, TIM_FLAG_UPDATE))
+ {
+ /* Clear the update flag */
+ CLEAR_BIT(TIMx->SR, TIM_FLAG_UPDATE);
+ }
+}
+
+/**
+ * @brief Timer Output Compare 1 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx;
+ uint32_t tmpccer;
+ uint32_t tmpcr2;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC1M;
+ tmpccmrx &= ~TIM_CCMR1_CC1S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC1P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= OC_Config->OCPolarity;
+
+ if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC1NP;
+ /* Set the Output N Polarity */
+ tmpccer |= OC_Config->OCNPolarity;
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC1NE;
+ }
+
+ if (IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS1;
+ tmpcr2 &= ~TIM_CR2_OIS1N;
+ /* Set the Output Idle state */
+ tmpcr2 |= OC_Config->OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= OC_Config->OCNIdleState;
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Timer Output Compare 2 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx;
+ uint32_t tmpccer;
+ uint32_t tmpcr2;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR1_OC2M;
+ tmpccmrx &= ~TIM_CCMR1_CC2S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC2P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 4U);
+
+ if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2))
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC2NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 4U);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC2NE;
+ }
+
+ if (IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS2;
+ tmpcr2 &= ~TIM_CR2_OIS2N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 2U);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 2U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Timer Output Compare 3 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx;
+ uint32_t tmpccer;
+ uint32_t tmpcr2;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+
+ /* Disable the Channel 3: Reset the CC2E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC3M;
+ tmpccmrx &= ~TIM_CCMR2_CC3S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC3P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 8U);
+
+ if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3))
+ {
+ assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= ~TIM_CCER_CC3NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (OC_Config->OCNPolarity << 8U);
+ /* Reset the Output N State */
+ tmpccer &= ~TIM_CCER_CC3NE;
+ }
+
+ if (IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS3;
+ tmpcr2 &= ~TIM_CR2_OIS3N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 4U);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (OC_Config->OCNIdleState << 4U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Timer Output Compare 4 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx;
+ uint32_t tmpccer;
+ uint32_t tmpcr2;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= ~TIM_CCMR2_OC4M;
+ tmpccmrx &= ~TIM_CCMR2_CC4S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC4P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 12U);
+
+ if (IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Check parameters */
+ assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS4;
+
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 6U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Timer Output Compare 5 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx,
+ const TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx;
+ uint32_t tmpccer;
+ uint32_t tmpcr2;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+
+ /* Disable the output: Reset the CCxE Bit */
+ TIMx->CCER &= ~TIM_CCER_CC5E;
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR3;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~(TIM_CCMR3_OC5M);
+ /* Select the Output Compare Mode */
+ tmpccmrx |= OC_Config->OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= ~TIM_CCER_CC5P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 16U);
+
+ if (IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS5;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 8U);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR3 */
+ TIMx->CCMR3 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR5 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Timer Output Compare 6 configuration
+ * @param TIMx to select the TIM peripheral
+ * @param OC_Config The output configuration structure
+ * @retval None
+ */
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx,
+ const TIM_OC_InitTypeDef *OC_Config)
+{
+ uint32_t tmpccmrx;
+ uint32_t tmpccer;
+ uint32_t tmpcr2;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+
+ /* Disable the output: Reset the CCxE Bit */
+ TIMx->CCER &= ~TIM_CCER_CC6E;
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR3;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= ~(TIM_CCMR3_OC6M);
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (OC_Config->OCMode << 8U);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint32_t)~TIM_CCER_CC6P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (OC_Config->OCPolarity << 20U);
+
+ if (IS_TIM_BREAK_INSTANCE(TIMx))
+ {
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &= ~TIM_CR2_OIS6;
+ /* Set the Output Idle state */
+ tmpcr2 |= (OC_Config->OCIdleState << 10U);
+ }
+
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR3 */
+ TIMx->CCMR3 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR6 = OC_Config->Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Slave Timer configuration function
+ * @param htim TIM handle
+ * @param sSlaveConfig Slave timer configuration
+ * @retval None
+ */
+static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+ const TIM_SlaveConfigTypeDef *sSlaveConfig)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+ uint32_t tmpccmr1;
+ uint32_t tmpccer;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* Reset the Trigger Selection Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source */
+ tmpsmcr |= sSlaveConfig->InputTrigger;
+
+ /* Reset the slave mode Bits */
+ tmpsmcr &= ~TIM_SMCR_SMS;
+ /* Set the slave mode */
+ tmpsmcr |= sSlaveConfig->SlaveMode;
+
+ /* Write to TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+
+ /* Configure the trigger prescaler, filter, and polarity */
+ switch (sSlaveConfig->InputTrigger)
+ {
+ case TIM_TS_ETRF:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+ /* Configure the ETR Trigger source */
+ TIM_ETR_SetConfig(htim->Instance,
+ sSlaveConfig->TriggerPrescaler,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ break;
+ }
+
+ case TIM_TS_TI1F_ED:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = htim->Instance->CCER;
+ htim->Instance->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = htim->Instance->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ htim->Instance->CCMR1 = tmpccmr1;
+ htim->Instance->CCER = tmpccer;
+ break;
+ }
+
+ case TIM_TS_TI1FP1:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI1 Filter and Polarity */
+ TIM_TI1_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ break;
+ }
+
+ case TIM_TS_TI2FP2:
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+ assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+ /* Configure TI2 Filter and Polarity */
+ TIM_TI2_ConfigInputStage(htim->Instance,
+ sSlaveConfig->TriggerPolarity,
+ sSlaveConfig->TriggerFilter);
+ break;
+ }
+
+ case TIM_TS_ITR0:
+ case TIM_TS_ITR1:
+ case TIM_TS_ITR2:
+ case TIM_TS_ITR3:
+ {
+ /* Check the parameter */
+ assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
+ * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1;
+ uint32_t tmpccer;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Select the Input */
+ if (IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+ {
+ tmpccmr1 &= ~TIM_CCMR1_CC1S;
+ tmpccmr1 |= TIM_ICSelection;
+ }
+ else
+ {
+ tmpccmr1 |= TIM_CCMR1_CC1S_0;
+ }
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI1.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1;
+ uint32_t tmpccer;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC1F;
+ tmpccmr1 |= (TIM_ICFilter << 4U);
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= TIM_ICPolarity;
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
+ * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1;
+ uint32_t tmpccer;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Select the Input */
+ tmpccmr1 &= ~TIM_CCMR1_CC2S;
+ tmpccmr1 |= (TIM_ICSelection << 8U);
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the Polarity and Filter for TI2.
+ * @param TIMx to select the TIM peripheral.
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr1;
+ uint32_t tmpccer;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Set the filter */
+ tmpccmr1 &= ~TIM_CCMR1_IC2F;
+ tmpccmr1 |= (TIM_ICFilter << 12U);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= (TIM_ICPolarity << 4U);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2;
+ uint32_t tmpccer;
+
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC3E;
+ tmpccmr2 = TIMx->CCMR2;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC3S;
+ tmpccmr2 |= TIM_ICSelection;
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC3F;
+ tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F);
+
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+ tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ICPolarity The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPOLARITY_RISING
+ * @arg TIM_ICPOLARITY_FALLING
+ * @arg TIM_ICPOLARITY_BOTHEDGE
+ * @param TIM_ICSelection specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
+ * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
+ * protected against un-initialized filter and polarity values.
+ * @retval None
+ */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+ uint32_t TIM_ICFilter)
+{
+ uint32_t tmpccmr2;
+ uint32_t tmpccer;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ tmpccer = TIMx->CCER;
+ TIMx->CCER &= ~TIM_CCER_CC4E;
+ tmpccmr2 = TIMx->CCMR2;
+
+ /* Select the Input */
+ tmpccmr2 &= ~TIM_CCMR2_CC4S;
+ tmpccmr2 |= (TIM_ICSelection << 8U);
+
+ /* Set the filter */
+ tmpccmr2 &= ~TIM_CCMR2_IC4F;
+ tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F);
+
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+ tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer ;
+}
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx to select the TIM peripheral
+ * @param InputTriggerSource The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource)
+{
+ uint32_t tmpsmcr;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+ /* Reset the TS Bits */
+ tmpsmcr &= ~TIM_SMCR_TS;
+ /* Set the Input Trigger source and the slave mode*/
+ tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1);
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx to select the TIM peripheral
+ * @param TIM_ExtTRGPrescaler The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF.
+ * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active.
+ * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active.
+ * @param ExtTRGFilter External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+ uint32_t tmpsmcr;
+
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the ETR Bits */
+ tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U)));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @arg TIM_CHANNEL_4: TIM Channel 4
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @param ChannelState specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE.
+ * @retval None
+ */
+void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+ uint32_t tmp;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CC1_INSTANCE(TIMx));
+ assert_param(IS_TIM_CHANNELS(Channel));
+
+ tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */
+}
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Reset interrupt callbacks to the legacy weak callbacks.
+ * @param htim pointer to a TIM_HandleTypeDef structure that contains
+ * the configuration information for TIM module.
+ * @retval None
+ */
+void TIM_ResetCallback(TIM_HandleTypeDef *htim)
+{
+ /* Reset the TIM callback to the legacy weak callbacks */
+ htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback;
+ htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback;
+ htim->TriggerCallback = HAL_TIM_TriggerCallback;
+ htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback;
+ htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback;
+ htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback;
+ htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback;
+ htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback;
+ htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback;
+ htim->ErrorCallback = HAL_TIM_ErrorCallback;
+ htim->CommutationCallback = HAL_TIMEx_CommutCallback;
+ htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback;
+ htim->BreakCallback = HAL_TIMEx_BreakCallback;
+ htim->Break2Callback = HAL_TIMEx_Break2Callback;
+}
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
diff --git a/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c
new file mode 100644
index 0000000..6ddded0
--- /dev/null
+++ b/Drivers/STM32L4xx_HAL_Driver/Src/stm32l4xx_hal_tim_ex.c
@@ -0,0 +1,2820 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_tim_ex.c
+ * @author MCD Application Team
+ * @brief TIM HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Timer Extended peripheral:
+ * + Time Hall Sensor Interface Initialization
+ * + Time Hall Sensor Interface Start
+ * + Time Complementary signal break and dead time configuration
+ * + Time Master and Slave synchronization configuration
+ * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6)
+ * + Time OCRef clear configuration
+ * + Timer remapping capabilities configuration
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ @verbatim
+ ==============================================================================
+ ##### TIMER Extended features #####
+ ==============================================================================
+ [..]
+ The Timer Extended features include:
+ (#) Complementary outputs with programmable dead-time for :
+ (++) Output Compare
+ (++) PWM generation (Edge and Center-aligned Mode)
+ (++) One-pulse mode output
+ (#) Synchronization circuit to control the timer with external signals and to
+ interconnect several timers together.
+ (#) Break input to put the timer output signals in reset state or in a known state.
+ (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
+ positioning purposes
+
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Initialize the TIM low level resources by implementing the following functions
+ depending on the selected feature:
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit()
+
+ (#) Initialize the TIM low level resources :
+ (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
+ (##) TIM pins configuration
+ (+++) Enable the clock for the TIM GPIOs using the following function:
+ __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
+
+ (#) The external Clock can be configured, if needed (the default clock is the
+ internal clock from the APBx), using the following function:
+ HAL_TIM_ConfigClockSource, the clock configuration should be done before
+ any start function.
+
+ (#) Configure the TIM in the desired functioning mode using one of the
+ initialization function of this driver:
+ (++) HAL_TIMEx_HallSensor_Init() and HAL_TIMEx_ConfigCommutEvent(): to use the
+ Timer Hall Sensor Interface and the commutation event with the corresponding
+ Interrupt and DMA request if needed (Note that One Timer is used to interface
+ with the Hall sensor Interface and another Timer should be used to use
+ the commutation event).
+
+ (#) Activate the TIM peripheral using one of the start functions:
+ (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(),
+ HAL_TIMEx_OCN_Start_IT()
+ (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(),
+ HAL_TIMEx_PWMN_Start_IT()
+ (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(),
+ HAL_TIMEx_HallSensor_Start_IT().
+
+ @endverbatim
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup TIMEx TIMEx
+ * @brief TIM Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma);
+static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState);
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Hall Sensor functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure TIM HAL Sensor.
+ (+) De-initialize TIM HAL Sensor.
+ (+) Start the Hall Sensor Interface.
+ (+) Stop the Hall Sensor Interface.
+ (+) Start the Hall Sensor Interface and enable interrupts.
+ (+) Stop the Hall Sensor Interface and disable interrupts.
+ (+) Start the Hall Sensor Interface and enable DMA transfers.
+ (+) Stop the Hall Sensor Interface and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Initializes the TIM Hall Sensor Interface and initialize the associated handle.
+ * @note When the timer instance is initialized in Hall Sensor Interface mode,
+ * timer channels 1 and channel 2 are reserved and cannot be used for
+ * other purpose.
+ * @param htim TIM Hall Sensor Interface handle
+ * @param sConfig TIM Hall Sensor configuration structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, const TIM_HallSensor_InitTypeDef *sConfig)
+{
+ TIM_OC_InitTypeDef OC_Config;
+
+ /* Check the TIM handle allocation */
+ if (htim == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+ assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload));
+ assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+ assert_param(IS_TIM_PERIOD(htim, htim->Init.Period));
+ assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+ assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+ if (htim->State == HAL_TIM_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ htim->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ /* Reset interrupt callbacks to legacy week callbacks */
+ TIM_ResetCallback(htim);
+
+ if (htim->HallSensor_MspInitCallback == NULL)
+ {
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
+ }
+ /* Init the low level hardware : GPIO, CLOCK, NVIC */
+ htim->HallSensor_MspInitCallback(htim);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+ HAL_TIMEx_HallSensor_MspInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+ }
+
+ /* Set the TIM state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Configure the Time base in the Encoder Mode */
+ TIM_Base_SetConfig(htim->Instance, &htim->Init);
+
+ /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */
+ TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+
+ /* Reset the IC1PSC Bits */
+ htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+ /* Set the IC1PSC value */
+ htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+
+ /* Enable the Hall sensor interface (XOR function of the three inputs) */
+ htim->Instance->CR2 |= TIM_CR2_TI1S;
+
+ /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+
+ /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
+ htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+ htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+
+ /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+ OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+ OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+ OC_Config.OCMode = TIM_OCMODE_PWM2;
+ OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+ OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+ OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+ OC_Config.Pulse = sConfig->Commutation_Delay;
+
+ TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+
+ /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+ register to 101 */
+ htim->Instance->CR2 &= ~TIM_CR2_MMS;
+ htim->Instance->CR2 |= TIM_TRGO_OC2REF;
+
+ /* Initialize the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_READY;
+
+ /* Initialize the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Initialize the TIM state*/
+ htim->State = HAL_TIM_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the TIM Hall Sensor interface
+ * @param htim TIM Hall Sensor Interface handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Disable the TIM Peripheral Clock */
+ __HAL_TIM_DISABLE(htim);
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ if (htim->HallSensor_MspDeInitCallback == NULL)
+ {
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ htim->HallSensor_MspDeInitCallback(htim);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+ HAL_TIMEx_HallSensor_MspDeInit(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ /* Change the DMA burst operation state */
+ htim->DMABurstState = HAL_DMA_BURST_STATE_RESET;
+
+ /* Change the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET);
+
+ /* Change TIM state */
+ htim->State = HAL_TIM_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the TIM Hall Sensor MSP.
+ * @param htim TIM Hall Sensor Interface handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes TIM Hall Sensor MSP.
+ * @param htim TIM Hall Sensor Interface handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface.
+ * @param htim TIM Hall Sensor Interface handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+ uint32_t tmpsmcr;
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Check the TIM channels state */
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall sensor Interface.
+ * @param htim TIM Hall Sensor Interface handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channels 1, 2 and 3
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim TIM Hall Sensor Interface handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{
+ uint32_t tmpsmcr;
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Check the TIM channels state */
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the capture compare Interrupts 1 event */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in interrupt mode.
+ * @param htim TIM Hall Sensor Interface handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+ /* Disable the capture compare Interrupts event */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Hall Sensor Interface in DMA mode.
+ * @param htim TIM Hall Sensor Interface handle
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+ uint32_t tmpsmcr;
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Set the TIM channel state */
+ if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)
+ || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY))
+ {
+ return HAL_BUSY;
+ }
+ else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY)
+ && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY))
+ {
+ if ((pData == NULL) || (Length == 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ /* Enable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+
+ /* Set the DMA Input Capture 1 Callbacks */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
+ htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
+
+ /* Enable the DMA channel for Capture 1*/
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the capture compare 1 Interrupt */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Hall Sensor Interface in DMA mode.
+ * @param htim TIM Hall Sensor Interface handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
+
+ /* Disable the Input Capture channel 1
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+
+
+ /* Disable the capture compare Interrupts 1 event */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channel state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary Output Compare functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary Output Compare/PWM.
+ (+) Stop the Complementary Output Compare/PWM.
+ (+) Start the Complementary Output Compare/PWM and enable interrupts.
+ (+) Stop the Complementary Output Compare/PWM and disable interrupts.
+ (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
+ (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Check the TIM complementary channel state */
+ if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM complementary channel state */
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation on the complementary
+ * output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM complementary channel state */
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim TIM OC handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Check the TIM complementary channel state */
+ if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM complementary channel state */
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Output Compare interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ break;
+ }
+
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in interrupt mode
+ * on the complementary output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpccer;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM complementary channel state */
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Starts the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
+ uint16_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Set the TIM complementary channel state */
+ if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY)
+ {
+ if ((pData == NULL) || (Length == 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+ htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+ htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+ htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Output Compare DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Enable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the TIM Output Compare signal generation in DMA mode
+ * on the complementary output.
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Output Compare DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the Capture compare channel N */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM complementary channel state */
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary PWM functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary PWM.
+ (+) Stop the Complementary PWM.
+ (+) Start the Complementary PWM and enable interrupts.
+ (+) Stop the Complementary PWM and disable interrupts.
+ (+) Start the Complementary PWM and enable DMA transfers.
+ (+) Stop the Complementary PWM and disable DMA transfers.
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the PWM signal generation on the complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Check the TIM complementary channel state */
+ if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM complementary channel state */
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the PWM signal generation on the complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM complementary channel state */
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Check the TIM complementary channel state */
+ if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM complementary channel state */
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Enable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Enable the TIM Break interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the PWM signal generation in interrupt mode on the
+ * complementary output.
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpccer;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the TIM Break interrupt (only if no more channel is active) */
+ tmpccer = htim->Instance->CCER;
+ if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET)
+ {
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+ }
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM complementary channel state */
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Starts the TIM PWM signal generation in DMA mode on the
+ * complementary output
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be enabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData,
+ uint16_t Length)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ /* Set the TIM complementary channel state */
+ if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY)
+ {
+ return HAL_BUSY;
+ }
+ else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY)
+ {
+ if ((pData == NULL) || (Length == 0U))
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+ htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+ htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Set the DMA compare callbacks */
+ htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt;
+ htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt;
+
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ;
+
+ /* Enable the DMA channel */
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
+ {
+ /* Return error status */
+ return HAL_ERROR;
+ }
+ /* Enable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Enable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @brief Stops the TIM PWM signal generation in DMA mode on the complementary
+ * output
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
+
+ switch (Channel)
+ {
+ case TIM_CHANNEL_1:
+ {
+ /* Disable the TIM Capture/Compare 1 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]);
+ break;
+ }
+
+ case TIM_CHANNEL_2:
+ {
+ /* Disable the TIM Capture/Compare 2 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]);
+ break;
+ }
+
+ case TIM_CHANNEL_3:
+ {
+ /* Disable the TIM Capture/Compare 3 DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+ (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]);
+ break;
+ }
+
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ if (status == HAL_OK)
+ {
+ /* Disable the complementary PWM output */
+ TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM complementary channel state */
+ TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY);
+ }
+
+ /* Return function status */
+ return status;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Timer Complementary One Pulse functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Start the Complementary One Pulse generation.
+ (+) Stop the Complementary One Pulse.
+ (+) Start the Complementary One Pulse and enable interrupts.
+ (+) Stop the Complementary One Pulse and disable interrupts.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Starts the TIM One Pulse signal generation on the complementary
+ * output.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel pulse output channel to enable
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Check the TIM channels state */
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the complementary One Pulse output channel and the Input Capture channel */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation on the complementary
+ * output.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel pulse output channel to disable
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the complementary One Pulse output channel and the Input Capture channel */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Starts the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel pulse output channel to enable
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Check the TIM channels state */
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+
+ /* Enable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+
+ /* Enable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+
+ /* Enable the complementary One Pulse output channel and the Input Capture channel */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
+ TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE);
+
+ /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Stops the TIM One Pulse signal generation in interrupt mode on the
+ * complementary channel.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel pulse output channel to disable
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+ uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
+
+ /* Disable the TIM Capture/Compare 1 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+
+ /* Disable the TIM Capture/Compare 2 interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+
+ /* Disable the complementary One Pulse output channel and the Input Capture channel */
+ TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+ TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE);
+
+ /* Disable the Main Output */
+ __HAL_TIM_MOE_DISABLE(htim);
+
+ /* Disable the Peripheral */
+ __HAL_TIM_DISABLE(htim);
+
+ /* Set the TIM channels state */
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Configure the commutation event in case of use of the Hall sensor interface.
+ (+) Configure Output channels for OC and PWM mode.
+
+ (+) Configure Complementary channels, break features and dead time.
+ (+) Configure Master synchronization.
+ (+) Configure timer remapping capabilities.
+ (+) Enable or disable channel grouping.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure the TIM commutation event sequence.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
+ uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Disable Commutation Interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM);
+
+ /* Disable Commutation DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with interrupt.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
+ uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Disable Commutation DMA request */
+ __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_COM);
+
+ /* Enable the Commutation Interrupt */
+ __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the TIM commutation event sequence with DMA.
+ * @note This function is mandatory to use the commutation event in order to
+ * update the configuration at each commutation detection on the TRGI input of the Timer,
+ * the typical use of this feature is with the use of another Timer(interface Timer)
+ * configured in Hall sensor interface, this interface Timer will generate the
+ * commutation at its TRGO output (connected to Timer used in this function) each time
+ * the TI1 of the Interface Timer detect a commutation at its input TI1.
+ * @note The user should configure the DMA in his own software, in This function only the COMDE bit is set
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal trigger 0 selected
+ * @arg TIM_TS_ITR1: Internal trigger 1 selected
+ * @arg TIM_TS_ITR2: Internal trigger 2 selected
+ * @arg TIM_TS_ITR3: Internal trigger 3 selected
+ * @arg TIM_TS_NONE: No trigger is needed
+ * @param CommutationSource the Commutation Event source
+ * This parameter can be one of the following values:
+ * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+ * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger,
+ uint32_t CommutationSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+
+ __HAL_LOCK(htim);
+
+ if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+ (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+ {
+ /* Select the Input trigger */
+ htim->Instance->SMCR &= ~TIM_SMCR_TS;
+ htim->Instance->SMCR |= InputTrigger;
+ }
+
+ /* Select the Capture Compare preload feature */
+ htim->Instance->CR2 |= TIM_CR2_CCPC;
+ /* Select the Commutation event source */
+ htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+ htim->Instance->CR2 |= CommutationSource;
+
+ /* Enable the Commutation DMA Request */
+ /* Set the DMA Commutation Callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferHalfCpltCallback = TIMEx_DMACommutationHalfCplt;
+ /* Set the DMA error callback */
+ htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError;
+
+ /* Disable Commutation Interrupt */
+ __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM);
+
+ /* Enable the Commutation DMA Request */
+ __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the TIM in master mode.
+ * @param htim TIM handle.
+ * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that
+ * contains the selected trigger output (TRGO) and the Master/Slave
+ * mode.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim,
+ const TIM_MasterConfigTypeDef *sMasterConfig)
+{
+ uint32_t tmpcr2;
+ uint32_t tmpsmcr;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+ assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ /* Change the handler state */
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = htim->Instance->CR2;
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = htim->Instance->SMCR;
+
+ /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */
+ if (IS_TIM_TRGO2_INSTANCE(htim->Instance))
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2));
+
+ /* Clear the MMS2 bits */
+ tmpcr2 &= ~TIM_CR2_MMS2;
+ /* Select the TRGO2 source*/
+ tmpcr2 |= sMasterConfig->MasterOutputTrigger2;
+ }
+
+ /* Reset the MMS Bits */
+ tmpcr2 &= ~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ tmpcr2 |= sMasterConfig->MasterOutputTrigger;
+
+ /* Update TIMx CR2 */
+ htim->Instance->CR2 = tmpcr2;
+
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ /* Reset the MSM Bit */
+ tmpsmcr &= ~TIM_SMCR_MSM;
+ /* Set master mode */
+ tmpsmcr |= sMasterConfig->MasterSlaveMode;
+
+ /* Update TIMx SMCR */
+ htim->Instance->SMCR = tmpsmcr;
+ }
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param htim TIM handle
+ * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @note Interrupts can be generated when an active level is detected on the
+ * break input, the break 2 input or the system break input. Break
+ * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
+ const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig)
+{
+ /* Keep this variable initialized to 0 as it is used to configure BDTR register */
+ uint32_t tmpbdtr = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+ assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+ assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+ assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+ assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+ assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+
+ /* Set the BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BKF, (sBreakDeadTimeConfig->BreakFilter << TIM_BDTR_BKF_Pos));
+
+ if (IS_TIM_BKIN2_INSTANCE(htim->Instance))
+ {
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State));
+ assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity));
+ assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter));
+
+ /* Set the BREAK2 input related BDTR bits */
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2F, (sBreakDeadTimeConfig->Break2Filter << TIM_BDTR_BK2F_Pos));
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2E, sBreakDeadTimeConfig->Break2State);
+ MODIFY_REG(tmpbdtr, TIM_BDTR_BK2P, sBreakDeadTimeConfig->Break2Polarity);
+ }
+
+ /* Set TIMx_BDTR */
+ htim->Instance->BDTR = tmpbdtr;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configures the break input source.
+ * @param htim TIM handle.
+ * @param BreakInput Break input to configure
+ * This parameter can be one of the following values:
+ * @arg TIM_BREAKINPUT_BRK: Timer break input
+ * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input
+ * @param sBreakInputConfig Break input source configuration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim,
+ uint32_t BreakInput,
+ const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+ uint32_t tmporx;
+ uint32_t bkin_enable_mask;
+ uint32_t bkin_polarity_mask;
+ uint32_t bkin_enable_bitpos;
+ uint32_t bkin_polarity_bitpos;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_BREAKINPUT(BreakInput));
+ assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source));
+ assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable));
+#if defined(DFSDM1_Channel0)
+ if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1)
+ {
+ assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity));
+ }
+#else
+ assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity));
+#endif /* DFSDM1_Channel0 */
+
+ /* Check input state */
+ __HAL_LOCK(htim);
+
+ switch (sBreakInputConfig->Source)
+ {
+ case TIM_BREAKINPUTSOURCE_BKIN:
+ {
+ bkin_enable_mask = TIM1_OR2_BKINE;
+ bkin_enable_bitpos = TIM1_OR2_BKINE_Pos;
+ bkin_polarity_mask = TIM1_OR2_BKINP;
+ bkin_polarity_bitpos = TIM1_OR2_BKINP_Pos;
+ break;
+ }
+ case TIM_BREAKINPUTSOURCE_COMP1:
+ {
+ bkin_enable_mask = TIM1_OR2_BKCMP1E;
+ bkin_enable_bitpos = TIM1_OR2_BKCMP1E_Pos;
+ bkin_polarity_mask = TIM1_OR2_BKCMP1P;
+ bkin_polarity_bitpos = TIM1_OR2_BKCMP1P_Pos;
+ break;
+ }
+ case TIM_BREAKINPUTSOURCE_COMP2:
+ {
+ bkin_enable_mask = TIM1_OR2_BKCMP2E;
+ bkin_enable_bitpos = TIM1_OR2_BKCMP2E_Pos;
+ bkin_polarity_mask = TIM1_OR2_BKCMP2P;
+ bkin_polarity_bitpos = TIM1_OR2_BKCMP2P_Pos;
+ break;
+ }
+#if defined(DFSDM1_Channel0)
+ case TIM_BREAKINPUTSOURCE_DFSDM1:
+ {
+ bkin_enable_mask = TIM1_OR2_BKDF1BK0E;
+ bkin_enable_bitpos = TIM1_OR2_BKDF1BK0E_Pos;
+ bkin_polarity_mask = 0U;
+ bkin_polarity_bitpos = 0U;
+ break;
+ }
+#endif /* DFSDM1_Channel0 */
+
+ default:
+ {
+ bkin_enable_mask = 0U;
+ bkin_polarity_mask = 0U;
+ bkin_enable_bitpos = 0U;
+ bkin_polarity_bitpos = 0U;
+ break;
+ }
+ }
+
+ switch (BreakInput)
+ {
+ case TIM_BREAKINPUT_BRK:
+ {
+ /* Get the TIMx_OR2 register value */
+ tmporx = htim->Instance->OR2;
+
+ /* Enable the break input */
+ tmporx &= ~bkin_enable_mask;
+ tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask;
+
+ /* Set the break input polarity */
+#if defined(DFSDM1_Channel0)
+ if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1)
+#endif /* DFSDM1_Channel0 */
+ {
+ tmporx &= ~bkin_polarity_mask;
+ tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask;
+ }
+
+ /* Set TIMx_OR2 */
+ htim->Instance->OR2 = tmporx;
+ break;
+ }
+ case TIM_BREAKINPUT_BRK2:
+ {
+ /* Get the TIMx_OR3 register value */
+ tmporx = htim->Instance->OR3;
+
+ /* Enable the break input */
+ tmporx &= ~bkin_enable_mask;
+ tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask;
+
+ /* Set the break input polarity */
+#if defined(DFSDM1_Channel0)
+ if (sBreakInputConfig->Source != TIM_BREAKINPUTSOURCE_DFSDM1)
+#endif /* DFSDM1_Channel0 */
+ {
+ tmporx &= ~bkin_polarity_mask;
+ tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask;
+ }
+
+ /* Set TIMx_OR3 */
+ htim->Instance->OR3 = tmporx;
+ break;
+ }
+ default:
+ status = HAL_ERROR;
+ break;
+ }
+
+ __HAL_UNLOCK(htim);
+
+ return status;
+}
+
+/**
+ * @brief Configures the TIMx Remapping input capabilities.
+ * @param htim TIM handle.
+ * @param Remap specifies the TIM remapping source.
+ @if STM32L422xx
+ * For TIM1, the parameter is a combination of 2 fields (field1 | field2):
+ *
+ * field1 can have the following values:
+ * @arg TIM_TIM1_ETR_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog)
+ * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ *
+ * field2 can have the following values:
+ * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO
+ * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output
+ *
+ @endif
+@if STM32L486xx
+ * For TIM1, the parameter is a combination of 4 fields (field1 | field2 | field3 | field4):
+ *
+ * field1 can have the following values:
+ * @arg TIM_TIM1_ETR_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog)
+ * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ *
+ * field2 can have the following values:
+ * @arg TIM_TIM1_ETR_ADC3_NONE: TIM1_ETR is not connected to any ADC3 AWD (analog watchdog)
+ * @arg TIM_TIM1_ETR_ADC3_AWD1: TIM1_ETR is connected to ADC3 AWD1
+ * @arg TIM_TIM1_ETR_ADC3_AWD2: TIM1_ETR is connected to ADC3 AWD2
+ * @arg TIM_TIM1_ETR_ADC3_AWD3: TIM1_ETR is connected to ADC3 AWD3
+ *
+ * field3 can have the following values:
+ * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO
+ * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output
+ *
+ * field4 can have the following values:
+ * @arg TIM_TIM1_ETR_COMP1: TIM1_ETR is connected to COMP1 output
+ * @arg TIM_TIM1_ETR_COMP2: TIM1_ETR is connected to COMP2 output
+ * @note When field4 is set to TIM_TIM1_ETR_COMP1 or TIM_TIM1_ETR_COMP2 field1 and field2 values are not significant
+ @endif
+ @if STM32L443xx
+ * For TIM1, the parameter is a combination of 3 fields (field1 | field2 | field3):
+ *
+ * field1 can have the following values:
+ * @arg TIM_TIM1_ETR_ADC1_NONE: TIM1_ETR is not connected to any ADC1 AWD (analog watchdog)
+ * @arg TIM_TIM1_ETR_ADC1_AWD1: TIM1_ETR is connected to ADC1 AWD1
+ * @arg TIM_TIM1_ETR_ADC1_AWD2: TIM1_ETR is connected to ADC1 AWD2
+ * @arg TIM_TIM1_ETR_ADC1_AWD3: TIM1_ETR is connected to ADC1 AWD3
+ *
+ * field2 can have the following values:
+ * @arg TIM_TIM1_TI1_GPIO: TIM1 TI1 is connected to GPIO
+ * @arg TIM_TIM1_TI1_COMP1: TIM1 TI1 is connected to COMP1 output
+ *
+ * field3 can have the following values:
+ * @arg TIM_TIM1_ETR_COMP1: TIM1_ETR is connected to COMP1 output
+ * @arg TIM_TIM1_ETR_COMP2: TIM1_ETR is connected to COMP2 output
+ *
+ * @note When field3 is set to TIM_TIM1_ETR_COMP1 or TIM_TIM1_ETR_COMP2 field1 values is not significant
+ *
+ @endif
+ @if STM32L486xx
+ * For TIM2, the parameter is a combination of 3 fields (field1 | field2 | field3):
+ *
+ * field1 can have the following values:
+ * @arg TIM_TIM2_ITR1_TIM8_TRGO: TIM2_ITR1 is connected to TIM8_TRGO
+ * @arg TIM_TIM2_ITR1_OTG_FS_SOF: TIM2_ITR1 is connected to OTG_FS SOF
+ *
+ * field2 can have the following values:
+ * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO
+ * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE
+ * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output
+ * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output
+ *
+ * field3 can have the following values:
+ * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO
+ * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output
+ * @arg TIM_TIM2_TI4_COMP2: TIM2 TI4 is connected to COMP2 output
+ * @arg TIM_TIM2_TI4_COMP1_COMP2: TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output
+ @endif
+ @if STM32L422xx
+ * For TIM2, the parameter is a combination of 3 fields (field1 | field2 | field3):
+ *
+ * field1 can have the following values:
+ * @arg TIM_TIM2_ITR1_NONE: No internal trigger on TIM2_ITR1
+ * @arg TIM_TIM2_ITR1_USB_SOF: TIM2_ITR1 is connected to USB SOF
+ *
+ * field2 can have the following values:
+ * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO
+ * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE
+ * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output
+ *
+ * field3 can have the following values:
+ * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO
+ * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output
+ *
+ @endif
+ @if STM32L443xx
+ * For TIM2, the parameter is a combination of 3 fields (field1 | field2 | field3):
+ *
+ * field1 can have the following values:
+ * @arg TIM_TIM2_ITR1_NONE: No internal trigger on TIM2_ITR1
+ * @arg TIM_TIM2_ITR1_USB_SOF: TIM2_ITR1 is connected to USB SOF
+ *
+ * field2 can have the following values:
+ * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to GPIO
+ * @arg TIM_TIM2_ETR_LSE: TIM2_ETR is connected to LSE
+ * @arg TIM_TIM2_ETR_COMP1: TIM2_ETR is connected to COMP1 output
+ * @arg TIM_TIM2_ETR_COMP2: TIM2_ETR is connected to COMP2 output
+ *
+ * field3 can have the following values:
+ * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to GPIO
+ * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output
+ * @arg TIM_TIM2_TI4_COMP2: TIM2 TI4 is connected to COMP2 output
+ * @arg TIM_TIM2_TI4_COMP1_COMP2: TIM2 TI4 is connected to logical OR between COMP1 and COMP2 output
+ *
+ @endif
+ @if STM32L486xx
+ * For TIM3, the parameter is a combination 2 fields(field1 | field2):
+ *
+ * field1 can have the following values:
+ * @arg TIM_TIM3_TI1_GPIO: TIM3 TI1 is connected to GPIO
+ * @arg TIM_TIM3_TI1_COMP1: TIM3 TI1 is connected to COMP1 output
+ * @arg TIM_TIM3_TI1_COMP2: TIM3 TI1 is connected to COMP2 output
+ * @arg TIM_TIM3_TI1_COMP1_COMP2: TIM3 TI1 is connected to logical OR between COMP1 and COMP2 output
+ *
+ * field2 can have the following values:
+ * @arg TIM_TIM3_ETR_GPIO: TIM3_ETR is connected to GPIO
+ * @arg TIM_TIM3_ETR_COMP1: TIM3_ETR is connected to COMP1 output
+ *
+ @endif
+ @if STM32L486xx
+ * For TIM8, the parameter is a combination of 3 fields (field1 | field2 | field3):
+ *
+ * field1 can have the following values:
+ * @arg TIM_TIM8_ETR_ADC2_NONE: TIM8_ETR is not connected to any ADC2 AWD (analog watchdog)
+ * @arg TIM_TIM8_ETR_ADC2_AWD1: TIM8_ETR is connected to ADC2 AWD1
+ * @arg TIM_TIM8_ETR_ADC2_AWD2: TIM8_ETR is connected to ADC2 AWD2
+ * @arg TIM_TIM8_ETR_ADC2_AWD3: TIM8_ETR is connected to ADC2 AWD3
+ *
+ * field2 can have the following values:
+ * @arg TIM_TIM8_ETR_ADC3_NONE: TIM8_ETR is not connected to any ADC3 AWD (analog watchdog)
+ * @arg TIM_TIM8_ETR_ADC3_AWD1: TIM8_ETR is connected to ADC3 AWD1
+ * @arg TIM_TIM8_ETR_ADC3_AWD2: TIM8_ETR is connected to ADC3 AWD2
+ * @arg TIM_TIM8_ETR_ADC3_AWD3: TIM8_ETR is connected to ADC3 AWD3
+ *
+ * field3 can have the following values:
+ * @arg TIM_TIM8_TI1_GPIO: TIM8 TI1 is connected to GPIO
+ * @arg TIM_TIM8_TI1_COMP2: TIM8 TI1 is connected to COMP2 output
+ *
+ * field4 can have the following values:
+ * @arg TIM_TIM8_ETR_COMP1: TIM8_ETR is connected to COMP1 output
+ * @arg TIM_TIM8_ETR_COMP2: TIM8_ETR is connected to COMP2 output
+ * @note When field4 is set to TIM_TIM8_ETR_COMP1 or TIM_TIM8_ETR_COMP2 field1 and field2 values are not significant
+ *
+ @endif
+ @if STM32L422xx
+ * For TIM15, the parameter is a combination of 2 fields (field1 | field2):
+ *
+ * field1 can have the following values:
+ * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO
+ * @arg TIM_TIM15_TI1_LSE: TIM15 TI1 is connected to LSE
+ *
+ * field2 can have the following values:
+ * @arg TIM_TIM15_ENCODERMODE_NONE: No redirection
+ * @arg TIM_TIM15_ENCODERMODE_TIM2: TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ *
+ @endif
+ @if STM32L443xx
+ * For TIM15, the parameter is a combination of 2 fields (field1 | field2):
+ *
+ * field1 can have the following values:
+ * @arg TIM_TIM15_TI1_GPIO: TIM15 TI1 is connected to GPIO
+ * @arg TIM_TIM15_TI1_LSE: TIM15 TI1 is connected to LSE
+ *
+ * field2 can have the following values:
+ * @arg TIM_TIM15_ENCODERMODE_NONE: No redirection
+ * @arg TIM_TIM15_ENCODERMODE_TIM2: TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ * @arg TIM_TIM15_ENCODERMODE_TIM3: TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ * @arg TIM_TIM15_ENCODERMODE_TIM4: TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ *
+ @endif
+ @if STM32L486xx
+ * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI
+ * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE
+ * @arg TIM_TIM16_TI1_RTC: TIM16 TI1 is connected to RTC wakeup interrupt
+ *
+ @endif
+ @if STM32L422xx
+ * For TIM16, the parameter can have the following values:
+ * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI
+ * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE
+ * @arg TIM_TIM16_TI1_RTC: TIM16 TI1 is connected to RTC wakeup interrupt
+ * @arg TIM_TIM16_TI1_MSI: TIM16 TI1 is connected to MSI (constraints: MSI clock < 1/4 TIM APB clock)
+ * @arg TIM_TIM16_TI1_HSE_32: TIM16 TI1 is connected to HSE div 32 (note that HSE div 32 must be selected as RTC clock source)
+ * @arg TIM_TIM16_TI1_MCO: TIM16 TI1 is connected to MCO
+ *
+ @endif
+ @if STM32L443xx
+ * For TIM16, the parameter can have the following values:
+ * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to GPIO
+ * @arg TIM_TIM16_TI1_LSI: TIM16 TI1 is connected to LSI
+ * @arg TIM_TIM16_TI1_LSE: TIM16 TI1 is connected to LSE
+ * @arg TIM_TIM16_TI1_RTC: TIM16 TI1 is connected to RTC wakeup interrupt
+ * @arg TIM_TIM16_TI1_MSI: TIM16 TI1 is connected to MSI (constraints: MSI clock < 1/4 TIM APB clock)
+ * @arg TIM_TIM16_TI1_HSE_32: TIM16 TI1 is connected to HSE div 32 (note that HSE div 32 must be selected as RTC clock source)
+ * @arg TIM_TIM16_TI1_MCO: TIM16 TI1 is connected to MCO
+ *
+ @endif
+ @if STM32L486xx
+ * For TIM17, the parameter can have the following values:
+ * @arg TIM_TIM17_TI1_GPIO: TIM17 TI1 is connected to GPIO
+ * @arg TIM_TIM17_TI1_MSI: TIM17 TI1 is connected to MSI (constraints: MSI clock < 1/4 TIM APB clock)
+ * @arg TIM_TIM17_TI1_HSE_32: TIM17 TI1 is connected to HSE div 32
+ * @arg TIM_TIM17_TI1_MCO: TIM17 TI1 is connected to MCO
+ @endif
+ *
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+ uint32_t tmpor1;
+ uint32_t tmpor2;
+
+ /* Check parameters */
+ assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_REMAP(Remap));
+
+ __HAL_LOCK(htim);
+
+ /* Set ETR_SEL bit field (if required) */
+ if (IS_TIM_ETRSEL_INSTANCE(htim->Instance))
+ {
+ tmpor2 = htim->Instance->OR2;
+ tmpor2 &= ~TIM1_OR2_ETRSEL_Msk;
+ tmpor2 |= (Remap & TIM1_OR2_ETRSEL_Msk);
+
+ /* Set TIMx_OR2 */
+ htim->Instance->OR2 = tmpor2;
+ }
+
+ /* Set other remapping capabilities */
+ tmpor1 = Remap;
+ tmpor1 &= ~TIM1_OR2_ETRSEL_Msk;
+
+ /* Set TIMx_OR1 */
+ htim->Instance->OR1 = tmpor1;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Group channel 5 and channel 1, 2 or 3
+ * @param htim TIM handle.
+ * @param Channels specifies the reference signal(s) the OC5REF is combined with.
+ * This parameter can be any combination of the following values:
+ * TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC
+ * TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF
+ * TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF
+ * TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels)
+{
+ /* Check parameters */
+ assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance));
+ assert_param(IS_TIM_GROUPCH5(Channels));
+
+ /* Process Locked */
+ __HAL_LOCK(htim);
+
+ htim->State = HAL_TIM_STATE_BUSY;
+
+ /* Clear GC5Cx bit fields */
+ htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3 | TIM_CCR5_GC5C2 | TIM_CCR5_GC5C1);
+
+ /* Set GC5Cx bit fields */
+ htim->Instance->CCR5 |= Channels;
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+ __HAL_UNLOCK(htim);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+ * @brief Extended Callbacks functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended Callbacks functions #####
+ ==============================================================================
+ [..]
+ This section provides Extended TIM callback functions:
+ (+) Timer Commutation callback
+ (+) Timer Break callback
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Commutation callback in non-blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIMEx_CommutCallback could be implemented in the user file
+ */
+}
+/**
+ * @brief Commutation half complete callback in non-blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIMEx_CommutHalfCpltCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Break detection callback in non-blocking mode
+ * @param htim TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_TIMEx_BreakCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Break2 detection callback in non blocking mode
+ * @param htim: TIM handle
+ * @retval None
+ */
+__weak void HAL_TIMEx_Break2Callback(TIM_HandleTypeDef *htim)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(htim);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_TIMEx_Break2Callback could be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+ * @brief Extended Peripheral State functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended Peripheral State functions #####
+ ==============================================================================
+ [..]
+ This subsection permits to get in run-time the status of the peripheral
+ and the data flow.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the TIM Hall Sensor interface handle state.
+ * @param htim TIM Hall Sensor handle
+ * @retval HAL state
+ */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(const TIM_HandleTypeDef *htim)
+{
+ return htim->State;
+}
+
+/**
+ * @brief Return actual state of the TIM complementary channel.
+ * @param htim TIM handle
+ * @param ChannelN TIM Complementary channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @retval TIM Complementary channel state
+ */
+HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN)
+{
+ HAL_TIM_ChannelStateTypeDef channel_state;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN));
+
+ channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN);
+
+ return channel_state;
+}
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions
+ * @{
+ */
+
+/**
+ * @brief TIM DMA Commutation callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->CommutationCallback(htim);
+#else
+ HAL_TIMEx_CommutCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief TIM DMA Commutation half complete callback.
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ /* Change the htim state */
+ htim->State = HAL_TIM_STATE_READY;
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->CommutationHalfCpltCallback(htim);
+#else
+ HAL_TIMEx_CommutHalfCpltCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+}
+
+
+/**
+ * @brief TIM DMA Delay Pulse complete callback (complementary channel).
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+
+ if (hdma->Init.Mode == DMA_NORMAL)
+ {
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ }
+ else
+ {
+ /* nothing to do */
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->PWM_PulseFinishedCallback(htim);
+#else
+ HAL_TIM_PWM_PulseFinishedCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief TIM DMA error callback (complementary channel)
+ * @param hdma pointer to DMA handle.
+ * @retval None
+ */
+static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma)
+{
+ TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+
+ if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+ {
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY);
+ }
+ else
+ {
+ /* nothing to do */
+ }
+
+#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
+ htim->ErrorCallback(htim);
+#else
+ HAL_TIM_ErrorCallback(htim);
+#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
+
+ htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx to select the TIM peripheral
+ * @param Channel specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1
+ * @arg TIM_CHANNEL_2: TIM Channel 2
+ * @arg TIM_CHANNEL_3: TIM Channel 3
+ * @param ChannelNState specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
+ * @retval None
+ */
+static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+ uint32_t tmp;
+
+ tmp = TIM_CCER_CC1NE << (Channel & 0xFU); /* 0xFU = 15 bits max shift */
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0xFU)); /* 0xFU = 15 bits max shift */
+}
+/**
+ * @}
+ */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
diff --git a/ISKBoard.ioc b/ISKBoard.ioc
index 9ecd5d7..d43f3be 100644
--- a/ISKBoard.ioc
+++ b/ISKBoard.ioc
@@ -25,16 +25,20 @@
Mcu.IP1=NVIC
Mcu.IP2=RCC
Mcu.IP3=SYS
-Mcu.IP4=USART1
-Mcu.IPNb=5
+Mcu.IP4=TIM1
+Mcu.IP5=TIM6
+Mcu.IP6=USART1
+Mcu.IPNb=7
Mcu.Name=STM32L431R(B-C)Tx
Mcu.Package=LQFP64
Mcu.Pin0=PH0-OSC_IN (PH0)
Mcu.Pin1=PH1-OSC_OUT (PH1)
Mcu.Pin10=PA9
Mcu.Pin11=PA10
-Mcu.Pin12=PD2
-Mcu.Pin13=VP_SYS_VS_Systick
+Mcu.Pin12=PA11
+Mcu.Pin13=PD2
+Mcu.Pin14=VP_SYS_VS_Systick
+Mcu.Pin15=VP_TIM6_VS_ClockSourceINT
Mcu.Pin2=PB0
Mcu.Pin3=PB1
Mcu.Pin4=PB2
@@ -43,7 +47,7 @@
Mcu.Pin7=PB14
Mcu.Pin8=PC6
Mcu.Pin9=PC9
-Mcu.PinsNb=14
+Mcu.PinsNb=16
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32L431RCTx
@@ -63,6 +67,11 @@
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
PA10.Mode=Asynchronous
PA10.Signal=USART1_RX
+PA11.GPIOParameters=GPIO_PuPd,GPIO_Label
+PA11.GPIO_Label=Buzzer
+PA11.GPIO_PuPd=GPIO_PULLDOWN
+PA11.Locked=true
+PA11.Signal=S_TIM1_CH4
PA9.Mode=Asynchronous
PA9.Signal=USART1_TX
PB0.GPIOParameters=GPIO_Label
@@ -136,7 +145,7 @@
ProjectManager.UAScriptAfterPath=
ProjectManager.UAScriptBeforePath=
ProjectManager.UnderRoot=true
-ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_TIM6_Init-TIM6-false-HAL-true,6-MX_TIM1_Init-TIM1-false-HAL-true
RCC.ADCFreq_Value=12000000
RCC.AHBFreq_Value=80000000
RCC.APB1Freq_Value=80000000
@@ -195,9 +204,21 @@
SH.GPXTI13.ConfNb=1
SH.GPXTI14.0=GPIO_EXTI14
SH.GPXTI14.ConfNb=1
+SH.S_TIM1_CH4.0=TIM1_CH4,PWM Generation4 CH4
+SH.S_TIM1_CH4.ConfNb=1
+TIM1.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
+TIM1.IPParameters=Channel-PWM Generation4 CH4,Prescaler,Period,Pulse-PWM Generation4 CH4
+TIM1.Period=370-1
+TIM1.Prescaler=80-1
+TIM1.Pulse-PWM\ Generation4\ CH4=185
+TIM6.IPParameters=Prescaler,Period
+TIM6.Period=1
+TIM6.Prescaler=80-1
USART1.IPParameters=VirtualMode-Asynchronous
USART1.VirtualMode-Asynchronous=VM_ASYNC
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_TIM6_VS_ClockSourceINT.Mode=Enable_Timer
+VP_TIM6_VS_ClockSourceINT.Signal=TIM6_VS_ClockSourceINT
board=custom
isbadioc=false
--
Gitblit v1.9.1