From 94101a2cd9baed60360f68096033dc75cbb1dcb3 Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Wed, 10 Jul 2024 19:27:36 +0800
Subject: [PATCH] Add STM8S003F3 eDP LCD drvier

---
 mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_conf.h |  113 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 113 insertions(+), 0 deletions(-)

diff --git a/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_conf.h b/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_conf.h
new file mode 100644
index 0000000..8560f90
--- /dev/null
+++ b/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_conf.h
@@ -0,0 +1,113 @@
+/**
+  ******************************************************************************
+  * @file     stm8s_conf.h
+  * @author   MCD Application Team
+  * @version  V2.0.4
+  * @date     26-April-2018
+  * @brief    This file is used to configure the Library.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM8S_CONF_H
+#define __STM8S_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm8s.h"
+
+/* Uncomment the line below to enable peripheral header file inclusion */
+#if defined(STM8S105) || defined(STM8S005) || defined(STM8S103) || defined(STM8S003) ||\
+    defined(STM8S001) || defined(STM8S903) || defined (STM8AF626x)
+#include "stm8s_adc1.h" 
+#endif /* (STM8S105) ||(STM8S103) || (STM8S001) || (STM8S903) || STM8AF626x*/
+#if defined(STM8S208) || defined(STM8S207) || defined(STM8S007) || defined (STM8AF52Ax) ||\
+    defined (STM8AF62Ax)
+ #include "stm8s_adc2.h"
+#endif /* (STM8S208) || (STM8S207) || (STM8AF62Ax) || (STM8AF52Ax) */
+#include "stm8s_awu.h"
+#include "stm8s_beep.h"
+#if defined (STM8S208) || defined (STM8AF52Ax)
+ #include "stm8s_can.h"
+#endif /* STM8S208 || STM8AF52Ax */
+#include "stm8s_clk.h"
+#include "stm8s_exti.h"
+#include "stm8s_flash.h"
+#include "stm8s_gpio.h"
+#include "stm8s_i2c.h"
+#include "stm8s_itc.h"
+#include "stm8s_iwdg.h"
+#include "stm8s_rst.h"
+#include "stm8s_spi.h"
+#include "stm8s_tim1.h"
+#ifndef STM8S903
+ #include "stm8s_tim2.h"
+#endif /* STM8S903 */
+#if defined(STM8S208) || defined(STM8S207) || defined(STM8S007) ||defined(STM8S105) ||\
+    defined(STM8S005) ||  defined (STM8AF52Ax) || defined (STM8AF62Ax) || defined (STM8AF626x)
+ #include "stm8s_tim3.h"
+#endif /* (STM8S208) ||defined(STM8S207) || defined(STM8S007) ||defined(STM8S105) */ 
+#ifndef STM8S903
+ #include "stm8s_tim4.h"
+#endif /* STM8S903 */
+#ifdef STM8S903
+ #include "stm8s_tim5.h"
+ #include "stm8s_tim6.h"
+#endif /* STM8S903 */
+#if defined(STM8S208) ||defined(STM8S207) || defined(STM8S007) ||defined(STM8S103) ||\
+    defined(STM8S003) ||defined(STM8S001) || defined(STM8S903) || defined (STM8AF52Ax) || defined (STM8AF62Ax)
+ #include "stm8s_uart1.h"
+#endif /* STM8S208 || STM8S207 || STM8S103 || STM8S001 ||STM8S903 || STM8AF52Ax || STM8AF62Ax */
+#if defined(STM8S105) || defined(STM8S005) ||  defined (STM8AF626x)
+ #include "stm8s_uart2.h"
+#endif /* STM8S105 || STM8AF626x */
+#if defined(STM8S208) ||defined(STM8S207) || defined(STM8S007) || defined (STM8AF52Ax) ||\
+    defined (STM8AF62Ax)
+ #include "stm8s_uart3.h"
+#endif /* STM8S208 || STM8S207 || STM8AF52Ax || STM8AF62Ax */ 
+#include "stm8s_wwdg.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the
+   Standard Peripheral Library drivers code */
+#define USE_FULL_ASSERT    (1) 
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr: If expr is false, it calls assert_failed function
+  *   which reports the name of the source file and the source
+  *   line number of the call that failed.
+  *   If expr is true, it returns no value.
+  * @retval : None
+  */
+#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t* file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM8S_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--
Gitblit v1.9.1