From 94101a2cd9baed60360f68096033dc75cbb1dcb3 Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Wed, 10 Jul 2024 19:27:36 +0800
Subject: [PATCH] Add STM8S003F3 eDP LCD drvier

---
 mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_exti.h |  134 ++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 134 insertions(+), 0 deletions(-)

diff --git a/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_exti.h b/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_exti.h
new file mode 100644
index 0000000..f9eec66
--- /dev/null
+++ b/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_exti.h
@@ -0,0 +1,134 @@
+/**
+  ******************************************************************************
+  * @file    stm8s_exti.h
+  * @author  MCD Application Team
+  * @version V2.3.0
+  * @date    16-June-2017
+  * @brief   This file contains all functions prototype and macros for the EXTI peripheral.
+   ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM8S_EXTI_H
+#define __STM8S_EXTI_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm8s.h"
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @addtogroup EXTI_Exported_Types
+  * @{
+  */
+
+/**
+  * @brief  EXTI Sensitivity values for PORTA to PORTE
+  */
+typedef enum {
+  EXTI_SENSITIVITY_FALL_LOW  = (uint8_t)0x00, /*!< Interrupt on Falling edge and Low level */
+  EXTI_SENSITIVITY_RISE_ONLY = (uint8_t)0x01, /*!< Interrupt on Rising edge only */
+  EXTI_SENSITIVITY_FALL_ONLY = (uint8_t)0x02, /*!< Interrupt on Falling edge only */
+  EXTI_SENSITIVITY_RISE_FALL = (uint8_t)0x03  /*!< Interrupt on Rising and Falling edges */
+} EXTI_Sensitivity_TypeDef;
+
+/**
+  * @brief  EXTI Sensitivity values for TLI
+  */
+typedef enum {
+  EXTI_TLISENSITIVITY_FALL_ONLY = (uint8_t)0x00, /*!< Top Level Interrupt on Falling edge only */
+  EXTI_TLISENSITIVITY_RISE_ONLY = (uint8_t)0x04  /*!< Top Level Interrupt on Rising edge only */
+} EXTI_TLISensitivity_TypeDef;
+
+/**
+  * @brief  EXTI PortNum possible values
+  */
+typedef enum {
+  EXTI_PORT_GPIOA = (uint8_t)0x00, /*!< GPIO Port A */
+  EXTI_PORT_GPIOB = (uint8_t)0x01, /*!< GPIO Port B */
+  EXTI_PORT_GPIOC = (uint8_t)0x02, /*!< GPIO Port C */
+  EXTI_PORT_GPIOD = (uint8_t)0x03, /*!< GPIO Port D */
+  EXTI_PORT_GPIOE = (uint8_t)0x04  /*!< GPIO Port E */
+} EXTI_Port_TypeDef;
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @addtogroup EXTI_Private_Macros
+  * @{
+  */
+
+/**
+  * @brief  Macro used by the assert function in order to check the different sensitivity values for PORTA to PORTE.
+  */
+#define IS_EXTI_SENSITIVITY_OK(SensitivityValue) \
+  (((SensitivityValue) == EXTI_SENSITIVITY_FALL_LOW) || \
+   ((SensitivityValue) == EXTI_SENSITIVITY_RISE_ONLY) || \
+   ((SensitivityValue) == EXTI_SENSITIVITY_FALL_ONLY) || \
+   ((SensitivityValue) == EXTI_SENSITIVITY_RISE_FALL))
+
+/**
+  * @brief  Macro used by the assert function in order to check the different sensitivity values for TLI.
+  */
+#define IS_EXTI_TLISENSITIVITY_OK(SensitivityValue) \
+  (((SensitivityValue) == EXTI_TLISENSITIVITY_FALL_ONLY) || \
+   ((SensitivityValue) == EXTI_TLISENSITIVITY_RISE_ONLY))
+
+/**
+  * @brief  Macro used by the assert function in order to check the different Port values
+  */
+#define IS_EXTI_PORT_OK(PORT) \
+  (((PORT) == EXTI_PORT_GPIOA) ||\
+   ((PORT) == EXTI_PORT_GPIOB) ||\
+   ((PORT) == EXTI_PORT_GPIOC) ||\
+   ((PORT) == EXTI_PORT_GPIOD) ||\
+   ((PORT) == EXTI_PORT_GPIOE))
+
+/**
+  * @brief  Macro used by the assert function in order to check the different values of the EXTI PinMask
+  */
+#define IS_EXTI_PINMASK_OK(PinMask) ((((PinMask) & (uint8_t)0x00) == (uint8_t)0x00) && ((PinMask) != (uint8_t)0x00))
+
+/**
+  * @}
+  */
+
+/* Exported functions ------------------------------------------------------- */
+
+/** @addtogroup EXTI_Exported_Functions
+  * @{
+  */
+
+void EXTI_DeInit(void);
+void EXTI_SetExtIntSensitivity(EXTI_Port_TypeDef Port, EXTI_Sensitivity_TypeDef SensitivityValue);
+void EXTI_SetTLISensitivity(EXTI_TLISensitivity_TypeDef SensitivityValue);
+EXTI_Sensitivity_TypeDef EXTI_GetExtIntSensitivity(EXTI_Port_TypeDef Port);
+EXTI_TLISensitivity_TypeDef EXTI_GetTLISensitivity(void);
+
+/**
+  * @}
+  */
+
+#endif /* __STM8S_EXTI_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--
Gitblit v1.9.1