From 94101a2cd9baed60360f68096033dc75cbb1dcb3 Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Wed, 10 Jul 2024 19:27:36 +0800
Subject: [PATCH] Add STM8S003F3 eDP LCD drvier
---
mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_itc.h | 186 ++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 186 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_itc.h b/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_itc.h
new file mode 100644
index 0000000..cc64f73
--- /dev/null
+++ b/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/inc/stm8s_itc.h
@@ -0,0 +1,186 @@
+/**
+ ******************************************************************************
+ * @file stm8s_itc.h
+ * @author MCD Application Team
+ * @version V2.3.0
+ * @date 16-June-2017
+ * @brief This file contains all functions prototype and macros for the ITC peripheral.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM8S_ITC_H
+#define __STM8S_ITC_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm8s.h"
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @addtogroup ITC_Exported_Types
+ * @{
+ */
+
+/**
+ * @brief ITC Interrupt Lines selection
+ */
+typedef enum {
+ ITC_IRQ_TLI = (uint8_t)0, /*!< Software interrupt */
+ ITC_IRQ_AWU = (uint8_t)1, /*!< Auto wake up from halt interrupt */
+ ITC_IRQ_CLK = (uint8_t)2, /*!< Clock controller interrupt */
+ ITC_IRQ_PORTA = (uint8_t)3, /*!< Port A external interrupts */
+ ITC_IRQ_PORTB = (uint8_t)4, /*!< Port B external interrupts */
+ ITC_IRQ_PORTC = (uint8_t)5, /*!< Port C external interrupts */
+ ITC_IRQ_PORTD = (uint8_t)6, /*!< Port D external interrupts */
+ ITC_IRQ_PORTE = (uint8_t)7, /*!< Port E external interrupts */
+
+#if defined(STM8S208) || defined(STM8AF52Ax)
+ ITC_IRQ_CAN_RX = (uint8_t)8, /*!< beCAN RX interrupt */
+ ITC_IRQ_CAN_TX = (uint8_t)9, /*!< beCAN TX/ER/SC interrupt */
+#endif /*STM8S208 or STM8AF52Ax */
+
+#if defined(STM8S903) || defined(STM8AF622x)
+ ITC_IRQ_PORTF = (uint8_t)8, /*!< Port F external interrupts */
+#endif /*STM8S903 or STM8AF622x */
+
+ ITC_IRQ_SPI = (uint8_t)10, /*!< SPI interrupt */
+ ITC_IRQ_TIM1_OVF = (uint8_t)11, /*!< TIM1 update/overflow/underflow/trigger/
+ break interrupt*/
+ ITC_IRQ_TIM1_CAPCOM = (uint8_t)12, /*!< TIM1 capture/compare interrupt */
+
+#if defined(STM8S903) || defined(STM8AF622x)
+ ITC_IRQ_TIM5_OVFTRI = (uint8_t)13, /*!< TIM5 update/overflow/underflow/trigger/
+ interrupt */
+ ITC_IRQ_TIM5_CAPCOM = (uint8_t)14, /*!< TIM5 capture/compare interrupt */
+#else
+ ITC_IRQ_TIM2_OVF = (uint8_t)13, /*!< TIM2 update /overflow interrupt */
+ ITC_IRQ_TIM2_CAPCOM = (uint8_t)14, /*!< TIM2 capture/compare interrupt */
+#endif /*STM8S903 or STM8AF622x */
+
+ ITC_IRQ_TIM3_OVF = (uint8_t)15, /*!< TIM3 update /overflow interrupt*/
+ ITC_IRQ_TIM3_CAPCOM = (uint8_t)16, /*!< TIM3 update /overflow interrupt */
+
+#if defined(STM8S208) ||defined(STM8S207) || defined (STM8S007) || defined(STM8S103) || \
+ defined(STM8S003) || defined(STM8S001) ||defined(STM8S903) || defined (STM8AF52Ax) || defined (STM8AF62Ax)
+ ITC_IRQ_UART1_TX = (uint8_t)17, /*!< UART1 TX interrupt */
+ ITC_IRQ_UART1_RX = (uint8_t)18, /*!< UART1 RX interrupt */
+#endif /*STM8S208 or STM8S207 or STM8S007 or STM8S103 or STM8S003 or STM8S001 or STM8S903 or STM8AF52Ax or STM8AF62Ax */
+#if defined(STM8AF622x)
+ ITC_IRQ_UART4_TX = (uint8_t)17, /*!< UART4 TX interrupt */
+ ITC_IRQ_UART4_RX = (uint8_t)18, /*!< UART4 RX interrupt */
+#endif /*STM8AF622x */
+
+ ITC_IRQ_I2C = (uint8_t)19, /*!< I2C interrupt */
+
+#if defined(STM8S105) || defined(STM8S005) || defined(STM8AF626x)
+ ITC_IRQ_UART2_TX = (uint8_t)20, /*!< USART2 TX interrupt */
+ ITC_IRQ_UART2_RX = (uint8_t)21, /*!< USART2 RX interrupt */
+#endif /*STM8S105 or STM8AF626x */
+
+#if defined(STM8S208) || defined(STM8S207) || defined(STM8S007) || defined(STM8AF52Ax) || defined(STM8AF62Ax)
+ ITC_IRQ_UART3_TX = (uint8_t)20, /*!< USART3 TX interrupt */
+ ITC_IRQ_UART3_RX = (uint8_t)21, /*!< USART3 RX interrupt */
+ ITC_IRQ_ADC2 = (uint8_t)22, /*!< ADC2 interrupt */
+#endif /*STM8S208 or STM8S207 or STM8AF52Ax or STM8AF62Ax */
+
+#if defined(STM8S105) || defined(STM8S005) || defined(STM8S103) || defined(STM8S003) || defined(STM8S001) || defined(STM8S903) || defined(STM8AF626x) || defined(STM8AF622x)
+ ITC_IRQ_ADC1 = (uint8_t)22, /*!< ADC1 interrupt */
+#endif /*STM8S105 or STM8S005 or STM8S003 or STM8S103 or STM8S001 or STM8S903 or STM8AF626x or STM8AF622x */
+
+#if defined(STM8S903) || defined(STM8AF622x)
+ ITC_IRQ_TIM6_OVFTRI = (uint8_t)23, /*!< TIM6 update/overflow/underflow/trigger/
+ interrupt */
+#else
+ ITC_IRQ_TIM4_OVF = (uint8_t)23, /*!< TIM4 update /overflow interrupt */
+#endif /*STM8S903 or STM8AF622x */
+
+ ITC_IRQ_EEPROM_EEC = (uint8_t)24 /*!< Flash interrupt */
+} ITC_Irq_TypeDef;
+
+/**
+ * @brief ITC Priority Levels selection
+ */
+typedef enum {
+ ITC_PRIORITYLEVEL_0 = (uint8_t)0x02, /*!< Software priority level 0 (cannot be written) */
+ ITC_PRIORITYLEVEL_1 = (uint8_t)0x01, /*!< Software priority level 1 */
+ ITC_PRIORITYLEVEL_2 = (uint8_t)0x00, /*!< Software priority level 2 */
+ ITC_PRIORITYLEVEL_3 = (uint8_t)0x03 /*!< Software priority level 3 */
+} ITC_PriorityLevel_TypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @addtogroup ITC_Exported_Constants
+ * @{
+ */
+#define CPU_SOFT_INT_DISABLED ((uint8_t)0x28) /*!< Mask for I1 and I0 bits in CPU_CC register */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+
+/**
+ * @brief Macros used by the assert function in order to check the different functions parameters.
+ * @addtogroup ITC_Private_Macros
+ * @{
+ */
+
+/* Used by assert function */
+#define IS_ITC_IRQ_OK(IRQ) ((IRQ) <= (uint8_t)24)
+
+/* Used by assert function */
+#define IS_ITC_PRIORITY_OK(PriorityValue) \
+ (((PriorityValue) == ITC_PRIORITYLEVEL_0) || \
+ ((PriorityValue) == ITC_PRIORITYLEVEL_1) || \
+ ((PriorityValue) == ITC_PRIORITYLEVEL_2) || \
+ ((PriorityValue) == ITC_PRIORITYLEVEL_3))
+
+/* Used by assert function */
+#define IS_ITC_INTERRUPTS_DISABLED (ITC_GetSoftIntStatus() == CPU_SOFT_INT_DISABLED)
+
+/**
+ * @}
+ */
+
+/* Exported functions ------------------------------------------------------- */
+
+/** @addtogroup ITC_Exported_Functions
+ * @{
+ */
+
+uint8_t ITC_GetCPUCC(void);
+void ITC_DeInit(void);
+uint8_t ITC_GetSoftIntStatus(void);
+void ITC_SetSoftwarePriority(ITC_Irq_TypeDef IrqNum, ITC_PriorityLevel_TypeDef PriorityValue);
+ITC_PriorityLevel_TypeDef ITC_GetSoftwarePriority(ITC_Irq_TypeDef IrqNum);
+
+/**
+ * @}
+ */
+
+#endif /* __STM8S_ITC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1