From 94101a2cd9baed60360f68096033dc75cbb1dcb3 Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Wed, 10 Jul 2024 19:27:36 +0800
Subject: [PATCH] Add STM8S003F3 eDP LCD drvier
---
mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/src/stm8s_awu.c | 198 +++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 198 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/src/stm8s_awu.c b/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/src/stm8s_awu.c
new file mode 100644
index 0000000..dc57d68
--- /dev/null
+++ b/mcu_sdk/stm8s003f3_edp/Libraries/STM8S_StdPeriph_Driver/src/stm8s_awu.c
@@ -0,0 +1,198 @@
+/**
+ ******************************************************************************
+ * @file stm8s_awu.c
+ * @author MCD Application Team
+ * @version V2.3.0
+ * @date 16-June-2017
+ * @brief This file contains all the functions for the AWU peripheral.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm8s_awu.h"
+
+/** @addtogroup STM8S_StdPeriph_Driver
+ * @{
+ */
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/* See also AWU_Timebase_TypeDef structure in stm8s_awu.h file :
+ N 2 5 1 2 4 8 1 3 6 1 2 5 1 2 1 3
+ O 5 0 m m m m 6 2 4 2 5 1 s s 2 0
+ I 0 0 s s s s m m m 8 6 2 s s
+ T u u s s s m m m
+ s s s s s
+*/
+/** Contains the different values to write in the APR register (used by AWU_Init function) */
+CONST uint8_t APR_Array[17] =
+ {
+ 0, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 61, 23, 23, 62
+ };
+
+/** Contains the different values to write in the TBR register (used by AWU_Init function) */
+CONST uint8_t TBR_Array[17] =
+ {
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 12, 14, 15, 15
+ };
+
+/* Public functions ----------------------------------------------------------*/
+
+/**
+ * @addtogroup AWU_Public_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the AWU peripheral registers to their default reset
+ * values.
+ * @param None
+ * @retval None
+ */
+void AWU_DeInit(void)
+{
+ AWU->CSR = AWU_CSR_RESET_VALUE;
+ AWU->APR = AWU_APR_RESET_VALUE;
+ AWU->TBR = AWU_TBR_RESET_VALUE;
+}
+
+/**
+ * @brief Initializes the AWU peripheral according to the specified parameters.
+ * @param AWU_TimeBase : Time base selection (interval between AWU interrupts).
+ * can be one of the values of @ref AWU_Timebase_TypeDef.
+ * @retval None
+ * @par Required preconditions:
+ * The LS RC calibration must be performed before calling this function.
+ */
+void AWU_Init(AWU_Timebase_TypeDef AWU_TimeBase)
+{
+ /* Check parameter */
+ assert_param(IS_AWU_TIMEBASE_OK(AWU_TimeBase));
+
+ /* Enable the AWU peripheral */
+ AWU->CSR |= AWU_CSR_AWUEN;
+
+ /* Set the TimeBase */
+ AWU->TBR &= (uint8_t)(~AWU_TBR_AWUTB);
+ AWU->TBR |= TBR_Array[(uint8_t)AWU_TimeBase];
+
+ /* Set the APR divider */
+ AWU->APR &= (uint8_t)(~AWU_APR_APR);
+ AWU->APR |= APR_Array[(uint8_t)AWU_TimeBase];
+}
+
+/**
+ * @brief Enable or disable the AWU peripheral.
+ * @param NewState Indicates the new state of the AWU peripheral.
+ * @retval None
+ * @par Required preconditions:
+ * Initialisation of AWU and LS RC calibration must be done before.
+ */
+void AWU_Cmd(FunctionalState NewState)
+{
+ if (NewState != DISABLE)
+ {
+ /* Enable the AWU peripheral */
+ AWU->CSR |= AWU_CSR_AWUEN;
+ }
+ else
+ {
+ /* Disable the AWU peripheral */
+ AWU->CSR &= (uint8_t)(~AWU_CSR_AWUEN);
+ }
+}
+
+/**
+ * @brief Update APR register with the measured LSI frequency.
+ * @par Note on the APR calculation:
+ * A is the integer part of lsifreqkhz/4 and x the decimal part.
+ * x <= A/(1+2A) is equivalent to A >= x(1+2A) and also to 4A >= 4x(1+2A) [F1]
+ * but we know that A + x = lsifreqkhz/4 ==> 4x = lsifreqkhz-4A
+ * so [F1] can be written :
+ * 4A >= (lsifreqkhz-4A)(1+2A)
+ * @param LSIFreqHz Low Speed RC frequency measured by timer (in Hz).
+ * @retval None
+ * @par Required preconditions:
+ * - AWU must be disabled to avoid unwanted interrupts.
+ */
+void AWU_LSICalibrationConfig(uint32_t LSIFreqHz)
+{
+ uint16_t lsifreqkhz = 0x0;
+ uint16_t A = 0x0;
+
+ /* Check parameter */
+ assert_param(IS_LSI_FREQUENCY_OK(LSIFreqHz));
+
+ lsifreqkhz = (uint16_t)(LSIFreqHz / 1000); /* Converts value in kHz */
+
+ /* Calculation of AWU calibration value */
+
+ A = (uint16_t)(lsifreqkhz >> 2U); /* Division by 4, keep integer part only */
+
+ if ((4U * A) >= ((lsifreqkhz - (4U * A)) * (1U + (2U * A))))
+ {
+ AWU->APR = (uint8_t)(A - 2U);
+ }
+ else
+ {
+ AWU->APR = (uint8_t)(A - 1U);
+ }
+}
+
+/**
+ * @brief Configures AWU in Idle mode to reduce power consumption.
+ * @param None
+ * @retval None
+ */
+void AWU_IdleModeEnable(void)
+{
+ /* Disable AWU peripheral */
+ AWU->CSR &= (uint8_t)(~AWU_CSR_AWUEN);
+
+ /* No AWU timebase */
+ AWU->TBR = (uint8_t)(~AWU_TBR_AWUTB);
+}
+
+/**
+ * @brief Returns status of the AWU peripheral flag.
+ * @param None
+ * @retval FlagStatus : Status of the AWU flag.
+ * This parameter can be any of the @ref FlagStatus enumeration.
+ */
+FlagStatus AWU_GetFlagStatus(void)
+{
+ return((FlagStatus)(((uint8_t)(AWU->CSR & AWU_CSR_AWUF) == (uint8_t)0x00) ? RESET : SET));
+}
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1