From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001 From: android <android@lingyun.com> Date: Tue, 25 Jun 2024 21:49:39 +0800 Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code --- mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/DSP_Lib_TestSuite/Common/platform/GCC/startup_armv6-m.S | 263 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 263 insertions(+), 0 deletions(-) diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/DSP_Lib_TestSuite/Common/platform/GCC/startup_armv6-m.S b/mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/DSP_Lib_TestSuite/Common/platform/GCC/startup_armv6-m.S new file mode 100644 index 0000000..c928912 --- /dev/null +++ b/mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/DSP_Lib_TestSuite/Common/platform/GCC/startup_armv6-m.S @@ -0,0 +1,263 @@ +/* File: startup_armv6-m.S + * Purpose: startup file for armv6-m architecture devices. + * Should be used with GCC for ARM Embedded Processors + * Version: V2.00 + * Date: 16 November 2015 + * + */ +/* Copyright (c) 2011 - 2015 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + + + .syntax unified + .arch armv6-m + + .section .stack + .align 3 +#ifdef __STACK_SIZE + .equ Stack_Size, __STACK_SIZE +#else + .equ Stack_Size, 0x00000400 +#endif + .globl __StackTop + .globl __StackLimit +__StackLimit: + .space Stack_Size + .size __StackLimit, . - __StackLimit +__StackTop: + .size __StackTop, . - __StackTop + + .section .heap + .align 3 +#ifdef __HEAP_SIZE + .equ Heap_Size, __HEAP_SIZE +#else + .equ Heap_Size, 0x00000C00 +#endif + .globl __HeapBase + .globl __HeapLimit +__HeapBase: + .if Heap_Size + .space Heap_Size + .endif + .size __HeapBase, . - __HeapBase +__HeapLimit: + .size __HeapLimit, . - __HeapLimit + + .section .vectors + .align 2 + .globl __Vectors +__Vectors: + .long __StackTop /* Top of Stack */ + .long Reset_Handler /* Reset Handler */ + .long NMI_Handler /* NMI Handler */ + .long HardFault_Handler /* Hard Fault Handler */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long SVC_Handler /* SVCall Handler */ + .long 0 /* Reserved */ + .long 0 /* Reserved */ + .long PendSV_Handler /* PendSV Handler */ + .long SysTick_Handler /* SysTick Handler */ + + .size __Vectors, . - __Vectors + + .text + .thumb + .thumb_func + .align 1 + .globl Reset_Handler + .type Reset_Handler, %function +Reset_Handler: +/* Firstly it copies data from read only memory to RAM. There are two schemes + * to copy. One can copy more than one sections. Another can only copy + * one section. The former scheme needs more instructions and read-only + * data to implement than the latter. + * Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes. */ + +#ifdef __STARTUP_COPY_MULTIPLE +/* Multiple sections scheme. + * + * Between symbol address __copy_table_start__ and __copy_table_end__, + * there are array of triplets, each of which specify: + * offset 0: LMA of start of a section to copy from + * offset 4: VMA of start of a section to copy to + * offset 8: size of the section to copy. Must be multiply of 4 + * + * All addresses must be aligned to 4 bytes boundary. + */ + ldr r4, =__copy_table_start__ + ldr r5, =__copy_table_end__ + +.L_loop0: + cmp r4, r5 + bge .L_loop0_done + ldr r1, [r4] + ldr r2, [r4, #4] + ldr r3, [r4, #8] + +.L_loop0_0: + subs r3, #4 + blt .L_loop0_0_done + ldr r0, [r1, r3] + str r0, [r2, r3] + b .L_loop0_0 + +.L_loop0_0_done: + adds r4, #12 + b .L_loop0 + +.L_loop0_done: +#else +/* Single section scheme. + * + * The ranges of copy from/to are specified by following symbols + * __etext: LMA of start of the section to copy from. Usually end of text + * __data_start__: VMA of start of the section to copy to + * __data_end__: VMA of end of the section to copy to + * + * All addresses must be aligned to 4 bytes boundary. + */ + ldr r1, =__etext + ldr r2, =__data_start__ + ldr r3, =__data_end__ + + subs r3, r2 + ble .L_loop1_done + +.L_loop1: + subs r3, #4 + ldr r0, [r1,r3] + str r0, [r2,r3] + bgt .L_loop1 + +.L_loop1_done: +#endif /*__STARTUP_COPY_MULTIPLE */ + +/* This part of work usually is done in C library startup code. Otherwise, + * define this macro to enable it in this startup. + * + * There are two schemes too. One can clear multiple BSS sections. Another + * can only clear one section. The former is more size expensive than the + * latter. + * + * Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former. + * Otherwise efine macro __STARTUP_CLEAR_BSS to choose the later. + */ +#ifdef __STARTUP_CLEAR_BSS_MULTIPLE +/* Multiple sections scheme. + * + * Between symbol address __copy_table_start__ and __copy_table_end__, + * there are array of tuples specifying: + * offset 0: Start of a BSS section + * offset 4: Size of this BSS section. Must be multiply of 4 + */ + ldr r3, =__zero_table_start__ + ldr r4, =__zero_table_end__ + +.L_loop2: + cmp r3, r4 + bge .L_loop2_done + ldr r1, [r3] + ldr r2, [r3, #4] + movs r0, 0 + +.L_loop2_0: + subs r2, #4 + blt .L_loop2_0_done + str r0, [r1, r2] + b .L_loop2_0 +.L_loop2_0_done: + + adds r3, #8 + b .L_loop2 +.L_loop2_done: +#elif defined (__STARTUP_CLEAR_BSS) +/* Single BSS section scheme. + * + * The BSS section is specified by following symbols + * __bss_start__: start of the BSS section. + * __bss_end__: end of the BSS section. + * + * Both addresses must be aligned to 4 bytes boundary. + */ + ldr r1, =__bss_start__ + ldr r2, =__bss_end__ + + movs r0, 0 + + subs r2, r1 + ble .L_loop3_done + +.L_loop3: + subs r2, #4 + str r0, [r1, r2] + bgt .L_loop3 +.L_loop3_done: +#endif /* __STARTUP_CLEAR_BSS_MULTIPLE || __STARTUP_CLEAR_BSS */ + +#ifndef __NO_SYSTEM_INIT + bl SystemInit +#endif + +#ifndef __START +#define __START _start +#endif + bl __START + + .pool + .size Reset_Handler, . - Reset_Handler + + .align 1 + .thumb_func + .weak Default_Handler + .type Default_Handler, %function +Default_Handler: + bkpt #0 + b . + .size Default_Handler, . - Default_Handler + +/* Macro to define default handlers. Default handler + * will be weak symbol and just dead loops. They can be + * overwritten by other handlers */ + .macro def_irq_handler handler_name + .weak \handler_name + .set \handler_name, Default_Handler + .endm + + def_irq_handler NMI_Handler + def_irq_handler HardFault_Handler + def_irq_handler SVC_Handler + def_irq_handler PendSV_Handler + def_irq_handler SysTick_Handler + + .end -- Gitblit v1.9.1