From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code

---
 mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/Source/SupportFunctions/arm_q7_to_float.c |  119 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 119 insertions(+), 0 deletions(-)

diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/Source/SupportFunctions/arm_q7_to_float.c b/mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/Source/SupportFunctions/arm_q7_to_float.c
new file mode 100644
index 0000000..d866501
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/Source/SupportFunctions/arm_q7_to_float.c
@@ -0,0 +1,119 @@
+/* ----------------------------------------------------------------------
+ * Project:      CMSIS DSP Library
+ * Title:        arm_q7_to_float.c
+ * Description:  Converts the elements of the Q7 vector to floating-point vector
+ *
+ * $Date:        27. January 2017
+ * $Revision:    V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+
+/**
+ * @ingroup groupSupport
+ */
+
+/**
+ * @defgroup q7_to_x  Convert 8-bit Integer value
+ */
+
+/**
+ * @addtogroup q7_to_x
+ * @{
+ */
+
+/**
+ * @brief Converts the elements of the Q7 vector to floating-point vector.
+ * @param[in]       *pSrc points to the Q7 input vector
+ * @param[out]      *pDst points to the floating-point output vector
+ * @param[in]       blockSize length of the input vector
+ * @return none.
+ *
+ * \par Description:
+ *
+ * The equation used for the conversion process is:
+ *
+ * <pre>
+ * 	pDst[n] = (float32_t) pSrc[n] / 128;   0 <= n < blockSize.
+ * </pre>
+ *
+ */
+
+
+void arm_q7_to_float(
+  q7_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize)
+{
+  q7_t *pIn = pSrc;                              /* Src pointer */
+  uint32_t blkCnt;                               /* loop counter */
+
+
+#if defined (ARM_MATH_DSP)
+
+  /* Run the below code for Cortex-M4 and Cortex-M3 */
+
+  /*loop Unrolling */
+  blkCnt = blockSize >> 2U;
+
+  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.
+   ** a second loop below computes the remaining 1 to 3 samples. */
+  while (blkCnt > 0U)
+  {
+    /* C = (float32_t) A / 128 */
+    /* convert from q7 to float and then store the results in the destination buffer */
+    *pDst++ = ((float32_t) * pIn++ / 128.0f);
+    *pDst++ = ((float32_t) * pIn++ / 128.0f);
+    *pDst++ = ((float32_t) * pIn++ / 128.0f);
+    *pDst++ = ((float32_t) * pIn++ / 128.0f);
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+
+  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.
+   ** No loop unrolling is used. */
+  blkCnt = blockSize % 0x4U;
+
+#else
+
+  /* Run the below code for Cortex-M0 */
+
+  /* Loop over blockSize number of values */
+  blkCnt = blockSize;
+
+#endif /* #if defined (ARM_MATH_DSP) */
+
+  while (blkCnt > 0U)
+  {
+    /* C = (float32_t) A / 128 */
+    /* convert from q7 to float and then store the results in the destination buffer */
+    *pDst++ = ((float32_t) * pIn++ / 128.0f);
+
+    /* Decrement the loop counter */
+    blkCnt--;
+  }
+}
+
+/**
+ * @} end of q7_to_x group
+ */

--
Gitblit v1.9.1