From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/Source/TransformFunctions/arm_cfft_radix4_init_q31.c | 136 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 136 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/Source/TransformFunctions/arm_cfft_radix4_init_q31.c b/mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/Source/TransformFunctions/arm_cfft_radix4_init_q31.c
new file mode 100644
index 0000000..9c11754
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/CMSIS/DSP/Source/TransformFunctions/arm_cfft_radix4_init_q31.c
@@ -0,0 +1,136 @@
+/* ----------------------------------------------------------------------
+ * Project: CMSIS DSP Library
+ * Title: arm_cfft_radix4_init_q31.c
+ * Description: Radix-4 Decimation in Frequency Q31 FFT & IFFT initialization function
+ *
+ * $Date: 27. January 2017
+ * $Revision: V.1.5.1
+ *
+ * Target Processor: Cortex-M cores
+ * -------------------------------------------------------------------- */
+/*
+ * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "arm_math.h"
+#include "arm_common_tables.h"
+
+/**
+ * @ingroup groupTransforms
+ */
+
+/**
+ * @addtogroup ComplexFFT
+ * @{
+ */
+
+/**
+*
+* @brief Initialization function for the Q31 CFFT/CIFFT.
+* @deprecated Do not use this function. It has been superseded by \ref arm_cfft_q31 and will be removed
+* @param[in,out] *S points to an instance of the Q31 CFFT/CIFFT structure.
+* @param[in] fftLen length of the FFT.
+* @param[in] ifftFlag flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform.
+* @param[in] bitReverseFlag flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output.
+* @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLen</code> is not a supported value.
+*
+* \par Description:
+* \par
+* The parameter <code>ifftFlag</code> controls whether a forward or inverse transform is computed.
+* Set(=1) ifftFlag for calculation of CIFFT otherwise CFFT is calculated
+* \par
+* The parameter <code>bitReverseFlag</code> controls whether output is in normal order or bit reversed order.
+* Set(=1) bitReverseFlag for output to be in normal order otherwise output is in bit reversed order.
+* \par
+* The parameter <code>fftLen</code> Specifies length of CFFT/CIFFT process. Supported FFT Lengths are 16, 64, 256, 1024.
+* \par
+* This Function also initializes Twiddle factor table pointer and Bit reversal table pointer.
+*/
+
+arm_status arm_cfft_radix4_init_q31(
+ arm_cfft_radix4_instance_q31 * S,
+ uint16_t fftLen,
+ uint8_t ifftFlag,
+ uint8_t bitReverseFlag)
+{
+ /* Initialise the default arm status */
+ arm_status status = ARM_MATH_SUCCESS;
+ /* Initialise the FFT length */
+ S->fftLen = fftLen;
+ /* Initialise the Twiddle coefficient pointer */
+ S->pTwiddle = (q31_t *) twiddleCoef_4096_q31;
+ /* Initialise the Flag for selection of CFFT or CIFFT */
+ S->ifftFlag = ifftFlag;
+ /* Initialise the Flag for calculation Bit reversal or not */
+ S->bitReverseFlag = bitReverseFlag;
+
+ /* Initializations of Instance structure depending on the FFT length */
+ switch (S->fftLen)
+ {
+ /* Initializations of structure parameters for 4096 point FFT */
+ case 4096U:
+ /* Initialise the twiddle coef modifier value */
+ S->twidCoefModifier = 1U;
+ /* Initialise the bit reversal table modifier */
+ S->bitRevFactor = 1U;
+ /* Initialise the bit reversal table pointer */
+ S->pBitRevTable = (uint16_t *) armBitRevTable;
+ break;
+
+ /* Initializations of structure parameters for 1024 point FFT */
+ case 1024U:
+ /* Initialise the twiddle coef modifier value */
+ S->twidCoefModifier = 4U;
+ /* Initialise the bit reversal table modifier */
+ S->bitRevFactor = 4U;
+ /* Initialise the bit reversal table pointer */
+ S->pBitRevTable = (uint16_t *) & armBitRevTable[3];
+ break;
+
+ case 256U:
+ /* Initializations of structure parameters for 256 point FFT */
+ S->twidCoefModifier = 16U;
+ S->bitRevFactor = 16U;
+ S->pBitRevTable = (uint16_t *) & armBitRevTable[15];
+ break;
+
+ case 64U:
+ /* Initializations of structure parameters for 64 point FFT */
+ S->twidCoefModifier = 64U;
+ S->bitRevFactor = 64U;
+ S->pBitRevTable = (uint16_t *) & armBitRevTable[63];
+ break;
+
+ case 16U:
+ /* Initializations of structure parameters for 16 point FFT */
+ S->twidCoefModifier = 256U;
+ S->bitRevFactor = 256U;
+ S->pBitRevTable = (uint16_t *) & armBitRevTable[255];
+ break;
+
+ default:
+ /* Reporting argument error if fftSize is not valid value */
+ status = ARM_MATH_ARGUMENT_ERROR;
+ break;
+ }
+
+ return (status);
+}
+
+/**
+ * @} end of ComplexFFT group
+ */
--
Gitblit v1.9.1