From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h | 1003 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 1,003 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h
new file mode 100644
index 0000000..5ce97c2
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h
@@ -0,0 +1,1003 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_adc.h
+ * @author MCD Application Team
+ * @brief Header file containing functions prototypes of ADC HAL library.
+ ******************************************************************************
+ * @attention
+ *
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_ADC_H
+#define __STM32F1xx_HAL_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Types ADC Exported Types
+ * @{
+ */
+
+/**
+ * @brief Structure definition of ADC and regular group initialization
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope entire ADC (affects regular and injected groups): DataAlign, ScanConvMode.
+ * - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv.
+ * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+ * ADC can be either disabled or enabled without conversion on going on regular group.
+ */
+typedef struct
+{
+ uint32_t DataAlign; /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
+ or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
+ This parameter can be a value of @ref ADC_Data_align */
+ uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups.
+ This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+ If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
+ Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+ If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
+ Scan direction is upward: from rank1 to rank 'n'.
+ This parameter can be a value of @ref ADC_Scan_mode
+ Note: For regular group, this parameter should be enabled in conversion either by polling (HAL_ADC_Start with Discontinuous mode and NbrOfDiscConversion=1)
+ or by DMA (HAL_ADC_Start_DMA), but not by interruption (HAL_ADC_Start_IT): in scan mode, interruption is triggered only on the
+ the last conversion of the sequence. All previous conversions would be overwritten by the last one.
+ Injected group used with scan mode has not this constraint: each rank has its own result register, no data is overwritten. */
+ FunctionalState ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+ after the selected trigger occurred (software start or external trigger).
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
+ To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+ FunctionalState DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided.
+ If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+ uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
+ If set to ADC_SOFTWARE_START, external triggers are disabled.
+ If set to external trigger source, triggering is on event rising edge.
+ This parameter can be a value of @ref ADC_External_trigger_source_Regular */
+}ADC_InitTypeDef;
+
+/**
+ * @brief Structure definition of ADC channel for regular group
+ * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+ * ADC can be either disabled or enabled without conversion on going on regular group.
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
+ This parameter can be a value of @ref ADC_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability.
+ Note: On STM32F1 devices with several ADC: Only ADC1 can access internal measurement channels (VrefInt/TempSensor)
+ Note: On STM32F10xx8 and STM32F10xxB devices: A low-amplitude voltage glitch may be generated (on ADC input 0) on the PA0 pin, when the ADC is converting with injection trigger.
+ It is advised to distribute the analog channels so that Channel 0 is configured as an injected channel.
+ Refer to errata sheet of these devices for more details. */
+ uint32_t Rank; /*!< Specifies the rank in the regular group sequencer
+ This parameter can be a value of @ref ADC_regular_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits).
+ This parameter can be a value of @ref ADC_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (VrefInt/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 5us to 17.1us min). */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief ADC Configuration analog watchdog definition
+ * @note The setting of these parameters with function is conditioned to ADC state.
+ * ADC state can be either disabled or enabled without conversion on going on regular and injected groups.
+ */
+typedef struct
+{
+ uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all channels, regular/injected group.
+ This parameter can be a value of @ref ADC_analog_watchdog_mode. */
+ uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog.
+ This parameter has an effect only if watchdog mode is configured on single channel (parameter WatchdogMode)
+ This parameter can be a value of @ref ADC_channels. */
+ FunctionalState ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+ uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
+}ADC_AnalogWDGConfTypeDef;
+
+/**
+ * @brief HAL ADC state machine: ADC states definition (bitfields)
+ */
+/* States of ADC global scope */
+#define HAL_ADC_STATE_RESET 0x00000000U /*!< ADC not yet initialized or disabled */
+#define HAL_ADC_STATE_READY 0x00000001U /*!< ADC peripheral ready for use */
+#define HAL_ADC_STATE_BUSY_INTERNAL 0x00000002U /*!< ADC is busy to internal process (initialization, calibration) */
+#define HAL_ADC_STATE_TIMEOUT 0x00000004U /*!< TimeOut occurrence */
+
+/* States of ADC errors */
+#define HAL_ADC_STATE_ERROR_INTERNAL 0x00000010U /*!< Internal error occurrence */
+#define HAL_ADC_STATE_ERROR_CONFIG 0x00000020U /*!< Configuration error occurrence */
+#define HAL_ADC_STATE_ERROR_DMA 0x00000040U /*!< DMA error occurrence */
+
+/* States of ADC group regular */
+#define HAL_ADC_STATE_REG_BUSY 0x00000100U /*!< A conversion on group regular is ongoing or can occur (either by continuous mode,
+ external trigger, low power auto power-on, multimode ADC master control) */
+#define HAL_ADC_STATE_REG_EOC 0x00000200U /*!< Conversion data available on group regular */
+#define HAL_ADC_STATE_REG_OVR 0x00000400U /*!< Not available on STM32F1 device: Overrun occurrence */
+#define HAL_ADC_STATE_REG_EOSMP 0x00000800U /*!< Not available on STM32F1 device: End Of Sampling flag raised */
+
+/* States of ADC group injected */
+#define HAL_ADC_STATE_INJ_BUSY 0x00001000U /*!< A conversion on group injected is ongoing or can occur (either by auto-injection mode,
+ external trigger, low power auto power-on, multimode ADC master control) */
+#define HAL_ADC_STATE_INJ_EOC 0x00002000U /*!< Conversion data available on group injected */
+#define HAL_ADC_STATE_INJ_JQOVF 0x00004000U /*!< Not available on STM32F1 device: Injected queue overflow occurrence */
+
+/* States of ADC analog watchdogs */
+#define HAL_ADC_STATE_AWD1 0x00010000U /*!< Out-of-window occurrence of analog watchdog 1 */
+#define HAL_ADC_STATE_AWD2 0x00020000U /*!< Not available on STM32F1 device: Out-of-window occurrence of analog watchdog 2 */
+#define HAL_ADC_STATE_AWD3 0x00040000U /*!< Not available on STM32F1 device: Out-of-window occurrence of analog watchdog 3 */
+
+/* States of ADC multi-mode */
+#define HAL_ADC_STATE_MULTIMODE_SLAVE 0x00100000U /*!< ADC in multimode slave state, controlled by another ADC master ( */
+
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct __ADC_HandleTypeDef
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+ void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */
+ void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */
+ void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */
+ void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */
+ void (* InjectedConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC group injected conversion complete callback */ /*!< ADC end of sampling callback */
+ void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */
+ void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+}ADC_HandleTypeDef;
+
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL ADC Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */
+ HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */
+ HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC analog watchdog 1 callback ID */
+ HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */
+ HAL_ADC_INJ_CONVERSION_COMPLETE_CB_ID = 0x04U, /*!< ADC group injected conversion complete callback ID */
+ HAL_ADC_MSPINIT_CB_ID = 0x09U, /*!< ADC Msp Init callback ID */
+ HAL_ADC_MSPDEINIT_CB_ID = 0x0AU /*!< ADC Msp DeInit callback ID */
+} HAL_ADC_CallbackIDTypeDef;
+
+/**
+ * @brief HAL ADC Callback pointer definition
+ */
+typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */
+
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Constants ADC Exported Constants
+ * @{
+ */
+
+/** @defgroup ADC_Error_Code ADC Error Code
+ * @{
+ */
+#define HAL_ADC_ERROR_NONE 0x00U /*!< No error */
+#define HAL_ADC_ERROR_INTERNAL 0x01U /*!< ADC IP internal error: if problem of clocking,
+ enable/disable, erroneous state */
+#define HAL_ADC_ERROR_OVR 0x02U /*!< Overrun error */
+#define HAL_ADC_ERROR_DMA 0x04U /*!< DMA transfer error */
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_Data_align ADC data alignment
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT 0x00000000U
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Scan_mode ADC scan mode
+ * @{
+ */
+/* Note: Scan mode values are not among binary choices ENABLE/DISABLE for */
+/* compatibility with other STM32 devices having a sequencer with */
+/* additional options. */
+#define ADC_SCAN_DISABLE 0x00000000U
+#define ADC_SCAN_ENABLE ((uint32_t)ADC_CR1_SCAN)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_edge_Regular ADC external trigger enable for regular group
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE 0x00000000U
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTTRIG)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels ADC channels
+ * @{
+ */
+/* Note: Depending on devices, some channels may not be available on package */
+/* pins. Refer to device datasheet for channels availability. */
+#define ADC_CHANNEL_0 0x00000000U
+#define ADC_CHANNEL_1 ((uint32_t)( ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_2 ((uint32_t)( ADC_SQR3_SQ1_1 ))
+#define ADC_CHANNEL_3 ((uint32_t)( ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_4 ((uint32_t)( ADC_SQR3_SQ1_2 ))
+#define ADC_CHANNEL_5 ((uint32_t)( ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_6 ((uint32_t)( ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 ))
+#define ADC_CHANNEL_7 ((uint32_t)( ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_8 ((uint32_t)( ADC_SQR3_SQ1_3 ))
+#define ADC_CHANNEL_9 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_10 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_1 ))
+#define ADC_CHANNEL_11 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_12 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 ))
+#define ADC_CHANNEL_13 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_14 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 ))
+#define ADC_CHANNEL_15 ((uint32_t)( ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_16 ((uint32_t)(ADC_SQR3_SQ1_4 ))
+#define ADC_CHANNEL_17 ((uint32_t)(ADC_SQR3_SQ1_4 | ADC_SQR3_SQ1_0))
+
+#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16 /* ADC internal channel (no connection on device pin) */
+#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17 /* ADC internal channel (no connection on device pin) */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_times ADC sampling times
+ * @{
+ */
+#define ADC_SAMPLETIME_1CYCLE_5 0x00000000U /*!< Sampling time 1.5 ADC clock cycle */
+#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t)( ADC_SMPR2_SMP0_0)) /*!< Sampling time 7.5 ADC clock cycles */
+#define ADC_SAMPLETIME_13CYCLES_5 ((uint32_t)( ADC_SMPR2_SMP0_1 )) /*!< Sampling time 13.5 ADC clock cycles */
+#define ADC_SAMPLETIME_28CYCLES_5 ((uint32_t)( ADC_SMPR2_SMP0_1 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 28.5 ADC clock cycles */
+#define ADC_SAMPLETIME_41CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 )) /*!< Sampling time 41.5 ADC clock cycles */
+#define ADC_SAMPLETIME_55CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 55.5 ADC clock cycles */
+#define ADC_SAMPLETIME_71CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_1 )) /*!< Sampling time 71.5 ADC clock cycles */
+#define ADC_SAMPLETIME_239CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_1 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 239.5 ADC clock cycles */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_rank ADC rank into regular group
+ * @{
+ */
+#define ADC_REGULAR_RANK_1 0x00000001U
+#define ADC_REGULAR_RANK_2 0x00000002U
+#define ADC_REGULAR_RANK_3 0x00000003U
+#define ADC_REGULAR_RANK_4 0x00000004U
+#define ADC_REGULAR_RANK_5 0x00000005U
+#define ADC_REGULAR_RANK_6 0x00000006U
+#define ADC_REGULAR_RANK_7 0x00000007U
+#define ADC_REGULAR_RANK_8 0x00000008U
+#define ADC_REGULAR_RANK_9 0x00000009U
+#define ADC_REGULAR_RANK_10 0x0000000AU
+#define ADC_REGULAR_RANK_11 0x0000000BU
+#define ADC_REGULAR_RANK_12 0x0000000CU
+#define ADC_REGULAR_RANK_13 0x0000000DU
+#define ADC_REGULAR_RANK_14 0x0000000EU
+#define ADC_REGULAR_RANK_15 0x0000000FU
+#define ADC_REGULAR_RANK_16 0x00000010U
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog mode
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_NONE 0x00000000U
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_conversion_group ADC conversion group
+ * @{
+ */
+#define ADC_REGULAR_GROUP ((uint32_t)(ADC_FLAG_EOC))
+#define ADC_INJECTED_GROUP ((uint32_t)(ADC_FLAG_JEOC))
+#define ADC_REGULAR_INJECTED_GROUP ((uint32_t)(ADC_FLAG_EOC | ADC_FLAG_JEOC))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Event_type ADC Event type
+ * @{
+ */
+#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD) /*!< ADC Analog watchdog event */
+
+#define ADC_AWD1_EVENT ADC_AWD_EVENT /*!< ADC Analog watchdog 1 event: Alternate naming for compatibility with other STM32 devices having several analog watchdogs */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition ADC interrupts definition
+ * @{
+ */
+#define ADC_IT_EOC ADC_CR1_EOCIE /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IT_JEOC ADC_CR1_JEOCIE /*!< ADC End of Injected Conversion interrupt source */
+#define ADC_IT_AWD ADC_CR1_AWDIE /*!< ADC Analog watchdog interrupt source */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition ADC flags definition
+ * @{
+ */
+#define ADC_FLAG_STRT ADC_SR_STRT /*!< ADC Regular group start flag */
+#define ADC_FLAG_JSTRT ADC_SR_JSTRT /*!< ADC Injected group start flag */
+#define ADC_FLAG_EOC ADC_SR_EOC /*!< ADC End of Regular conversion flag */
+#define ADC_FLAG_JEOC ADC_SR_JEOC /*!< ADC End of Injected conversion flag */
+#define ADC_FLAG_AWD ADC_SR_AWD /*!< ADC Analog watchdog flag */
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+
+/** @addtogroup ADC_Private_Constants ADC Private Constants
+ * @{
+ */
+
+/** @defgroup ADC_conversion_cycles ADC conversion cycles
+ * @{
+ */
+/* ADC conversion cycles (unit: ADC clock cycles) */
+/* (selected sampling time + conversion time of 12.5 ADC clock cycles, with */
+/* resolution 12 bits) */
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_1CYCLE5 14U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_7CYCLES5 20U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_13CYCLES5 26U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_28CYCLES5 41U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_41CYCLES5 54U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_55CYCLES5 68U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_71CYCLES5 84U
+#define ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_239CYCLES5 252U
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_times_all_channels ADC sampling times all channels
+ * @{
+ */
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 \
+ (ADC_SMPR2_SMP9_2 | ADC_SMPR2_SMP8_2 | ADC_SMPR2_SMP7_2 | ADC_SMPR2_SMP6_2 | \
+ ADC_SMPR2_SMP5_2 | ADC_SMPR2_SMP4_2 | ADC_SMPR2_SMP3_2 | ADC_SMPR2_SMP2_2 | \
+ ADC_SMPR2_SMP1_2 | ADC_SMPR2_SMP0_2)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 \
+ (ADC_SMPR1_SMP17_2 | ADC_SMPR1_SMP16_2 | ADC_SMPR1_SMP15_2 | ADC_SMPR1_SMP14_2 | \
+ ADC_SMPR1_SMP13_2 | ADC_SMPR1_SMP12_2 | ADC_SMPR1_SMP11_2 | ADC_SMPR1_SMP10_2 )
+
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 \
+ (ADC_SMPR2_SMP9_1 | ADC_SMPR2_SMP8_1 | ADC_SMPR2_SMP7_1 | ADC_SMPR2_SMP6_1 | \
+ ADC_SMPR2_SMP5_1 | ADC_SMPR2_SMP4_1 | ADC_SMPR2_SMP3_1 | ADC_SMPR2_SMP2_1 | \
+ ADC_SMPR2_SMP1_1 | ADC_SMPR2_SMP0_1)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 \
+ (ADC_SMPR1_SMP17_1 | ADC_SMPR1_SMP16_1 | ADC_SMPR1_SMP15_1 | ADC_SMPR1_SMP14_1 | \
+ ADC_SMPR1_SMP13_1 | ADC_SMPR1_SMP12_1 | ADC_SMPR1_SMP11_1 | ADC_SMPR1_SMP10_1 )
+
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0 \
+ (ADC_SMPR2_SMP9_0 | ADC_SMPR2_SMP8_0 | ADC_SMPR2_SMP7_0 | ADC_SMPR2_SMP6_0 | \
+ ADC_SMPR2_SMP5_0 | ADC_SMPR2_SMP4_0 | ADC_SMPR2_SMP3_0 | ADC_SMPR2_SMP2_0 | \
+ ADC_SMPR2_SMP1_0 | ADC_SMPR2_SMP0_0)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0 \
+ (ADC_SMPR1_SMP17_0 | ADC_SMPR1_SMP16_0 | ADC_SMPR1_SMP15_0 | ADC_SMPR1_SMP14_0 | \
+ ADC_SMPR1_SMP13_0 | ADC_SMPR1_SMP12_0 | ADC_SMPR1_SMP11_0 | ADC_SMPR1_SMP10_0 )
+
+#define ADC_SAMPLETIME_1CYCLE5_SMPR2ALLCHANNELS 0x00000000U
+#define ADC_SAMPLETIME_7CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_13CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1)
+#define ADC_SAMPLETIME_28CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_41CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2)
+#define ADC_SAMPLETIME_55CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_71CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1)
+#define ADC_SAMPLETIME_239CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+
+#define ADC_SAMPLETIME_1CYCLE5_SMPR1ALLCHANNELS 0x00000000U
+#define ADC_SAMPLETIME_7CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_13CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1)
+#define ADC_SAMPLETIME_28CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_41CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2)
+#define ADC_SAMPLETIME_55CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_71CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1)
+#define ADC_SAMPLETIME_239CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+/**
+ * @}
+ */
+
+/* Combination of all post-conversion flags bits: EOC/EOS, JEOC/JEOS, OVR, AWDx */
+#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_EOC | ADC_FLAG_JEOC | ADC_FLAG_AWD )
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+ * @{
+ */
+/* Macro for internal HAL driver usage, and possibly can be used into code of */
+/* final user. */
+
+/**
+ * @brief Enable the ADC peripheral
+ * @note ADC enable requires a delay for ADC stabilization time
+ * (refer to device datasheet, parameter tSTAB)
+ * @note On STM32F1, if ADC is already enabled this macro trigs a conversion
+ * SW start on regular group.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) \
+ (SET_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_ADON)))
+
+/**
+ * @brief Disable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) \
+ (CLEAR_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_ADON)))
+
+/** @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source
+ * @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source
+ * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \
+ (SET_BIT((__HANDLE__)->Instance->CR1, (__INTERRUPT__)))
+
+/** @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source
+ * @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source
+ * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \
+ (CLEAR_BIT((__HANDLE__)->Instance->CR1, (__INTERRUPT__)))
+
+/** @brief Checks if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC interrupt source to check
+ * This parameter can be any combination of the following values:
+ * @arg ADC_IT_EOC: ADC End of Regular Conversion interrupt source
+ * @arg ADC_IT_JEOC: ADC End of Injected Conversion interrupt source
+ * @arg ADC_IT_AWD: ADC Analog watchdog interrupt source
+ * @retval None
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+ (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * This parameter can be any combination of the following values:
+ * @arg ADC_FLAG_STRT: ADC Regular group start flag
+ * @arg ADC_FLAG_JSTRT: ADC Injected group start flag
+ * @arg ADC_FLAG_EOC: ADC End of Regular conversion flag
+ * @arg ADC_FLAG_JEOC: ADC End of Injected conversion flag
+ * @arg ADC_FLAG_AWD: ADC Analog watchdog flag
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) \
+ ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the ADC's pending flags
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * This parameter can be any combination of the following values:
+ * @arg ADC_FLAG_STRT: ADC Regular group start flag
+ * @arg ADC_FLAG_JSTRT: ADC Injected group start flag
+ * @arg ADC_FLAG_EOC: ADC End of Regular conversion flag
+ * @arg ADC_FLAG_JEOC: ADC End of Injected conversion flag
+ * @arg ADC_FLAG_AWD: ADC Analog watchdog flag
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+ (WRITE_REG((__HANDLE__)->Instance->SR, ~(__FLAG__)))
+
+/** @brief Reset ADC handle state
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->State = HAL_ADC_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \
+ ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+#endif
+
+/**
+ * @}
+ */
+
+/* Private macro ------------------------------------------------------------*/
+
+/** @defgroup ADC_Private_Macros ADC Private Macros
+ * @{
+ */
+/* Macro reserved for internal HAL driver usage, not intended to be used in */
+/* code of final user. */
+
+/**
+ * @brief Verification of ADC state: enabled or disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC enabled) or RESET (ADC disabled)
+ */
+#define ADC_IS_ENABLE(__HANDLE__) \
+ ((( ((__HANDLE__)->Instance->CR2 & ADC_CR2_ADON) == ADC_CR2_ADON ) \
+ ) ? SET : RESET)
+
+/**
+ * @brief Test if conversion trigger of regular group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
+ (READ_BIT((__HANDLE__)->Instance->CR2, ADC_CR2_EXTSEL) == ADC_SOFTWARE_START)
+
+/**
+ * @brief Test if conversion trigger of injected group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \
+ (READ_BIT((__HANDLE__)->Instance->CR2, ADC_CR2_JEXTSEL) == ADC_INJECTED_SOFTWARE_START)
+
+/**
+ * @brief Simultaneously clears and sets specific bits of the handle State
+ * @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(),
+ * the first parameter is the ADC handle State, the second parameter is the
+ * bit field to clear, the third and last parameter is the bit field to set.
+ * @retval None
+ */
+#define ADC_STATE_CLR_SET MODIFY_REG
+
+/**
+ * @brief Clear ADC error code (set it to error code: "no error")
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define ADC_CLEAR_ERRORCODE(__HANDLE__) \
+ ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+
+/**
+ * @brief Set ADC number of conversions into regular channel sequence length.
+ * @param _NbrOfConversion_: Regular channel sequence length
+ * @retval None
+ */
+#define ADC_SQR1_L_SHIFT(_NbrOfConversion_) \
+ (((_NbrOfConversion_) - (uint8_t)1) << ADC_SQR1_L_Pos)
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 10 and 18.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) \
+ ((_SAMPLETIME_) << (ADC_SMPR1_SMP11_Pos * ((_CHANNELNB_) - 10)))
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 0 and 9.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) \
+ ((_SAMPLETIME_) << (ADC_SMPR2_SMP1_Pos * (_CHANNELNB_)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 1 and 6.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) \
+ ((_CHANNELNB_) << (ADC_SQR3_SQ2_Pos * ((_RANKNB_) - 1)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 7 and 12.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) \
+ ((_CHANNELNB_) << (ADC_SQR2_SQ8_Pos * ((_RANKNB_) - 7)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 13 and 16.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) \
+ ((_CHANNELNB_) << (ADC_SQR1_SQ14_Pos * ((_RANKNB_) - 13)))
+
+/**
+ * @brief Set the injected sequence length.
+ * @param _JSQR_JL_: Sequence length.
+ * @retval None
+ */
+#define ADC_JSQR_JL_SHIFT(_JSQR_JL_) \
+ (((_JSQR_JL_) -1) << ADC_JSQR_JL_Pos)
+
+/**
+ * @brief Set the selected injected channel rank
+ * Note: on STM32F1 devices, channel rank position in JSQR register
+ * is depending on total number of ranks selected into
+ * injected sequencer (ranks sequence starting from 4-JL)
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @param _JSQR_JL_: Sequence length.
+ * @retval None
+ */
+#define ADC_JSQR_RK_JL(_CHANNELNB_, _RANKNB_, _JSQR_JL_) \
+ ((_CHANNELNB_) << (ADC_JSQR_JSQ2_Pos * ((4 - ((_JSQR_JL_) - (_RANKNB_))) - 1)))
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) \
+ ((_CONTINUOUS_MODE_) << ADC_CR2_CONT_Pos)
+
+/**
+ * @brief Configures the number of discontinuous conversions for the regular group channels.
+ * @param _NBR_DISCONTINUOUS_CONV_: Number of discontinuous conversions.
+ * @retval None
+ */
+#define ADC_CR1_DISCONTINUOUS_NUM(_NBR_DISCONTINUOUS_CONV_) \
+ (((_NBR_DISCONTINUOUS_CONV_) - 1) << ADC_CR1_DISCNUM_Pos)
+
+/**
+ * @brief Enable ADC scan mode to convert multiple ranks with sequencer.
+ * @param _SCAN_MODE_: Scan conversion mode.
+ * @retval None
+ */
+/* Note: Scan mode is compared to ENABLE for legacy purpose, this parameter */
+/* is equivalent to ADC_SCAN_ENABLE. */
+#define ADC_CR1_SCAN_SET(_SCAN_MODE_) \
+ (( ((_SCAN_MODE_) == ADC_SCAN_ENABLE) || ((_SCAN_MODE_) == ENABLE) \
+ )? (ADC_SCAN_ENABLE) : (ADC_SCAN_DISABLE) \
+ )
+
+/**
+ * @brief Get the maximum ADC conversion cycles on all channels.
+ * Returns the selected sampling time + conversion time (12.5 ADC clock cycles)
+ * Approximation of sampling time within 4 ranges, returns the highest value:
+ * below 7.5 cycles {1.5 cycle; 7.5 cycles},
+ * between 13.5 cycles and 28.5 cycles {13.5 cycles; 28.5 cycles}
+ * between 41.5 cycles and 71.5 cycles {41.5 cycles; 55.5 cycles; 71.5cycles}
+ * equal to 239.5 cycles
+ * Unit: ADC clock cycles
+ * @param __HANDLE__: ADC handle
+ * @retval ADC conversion cycles on all channels
+ */
+#define ADC_CONVCYCLES_MAX_RANGE(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) ) ? \
+ \
+ (( (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) == RESET) ) ? \
+ ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_7CYCLES5 : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_28CYCLES5) \
+ : \
+ ((((((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) == RESET)) || \
+ ((((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) == RESET))) ? \
+ ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_71CYCLES5 : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_239CYCLES5) \
+ )
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT) )
+
+#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \
+ ((SCAN_MODE) == ADC_SCAN_ENABLE) )
+
+#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) )
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
+ ((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_16) || \
+ ((CHANNEL) == ADC_CHANNEL_17) )
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \
+ ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_13CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_28CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_41CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_55CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_71CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_239CYCLES_5) )
+
+#define IS_ADC_REGULAR_RANK(CHANNEL) (((CHANNEL) == ADC_REGULAR_RANK_1 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_2 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_3 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_4 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_5 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_6 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_7 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_8 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_9 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_10) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_11) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_12) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_13) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_14) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_15) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_16) )
+
+#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) )
+
+#define IS_ADC_CONVERSION_GROUP(CONVERSION) (((CONVERSION) == ADC_REGULAR_GROUP) || \
+ ((CONVERSION) == ADC_INJECTED_GROUP) || \
+ ((CONVERSION) == ADC_REGULAR_INJECTED_GROUP) )
+
+#define IS_ADC_EVENT_TYPE(EVENT) ((EVENT) == ADC_AWD_EVENT)
+
+
+/** @defgroup ADC_range_verification ADC range verification
+ * For a unique ADC resolution: 12 bits
+ * @{
+ */
+#define IS_ADC_RANGE(ADC_VALUE) ((ADC_VALUE) <= 0x0FFFU)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_nb_conv_verification ADC regular nb conv verification
+ * @{
+ */
+#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 16U))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_discontinuous_mode_number_verification ADC regular discontinuous mode number verification
+ * @{
+ */
+#define IS_ADC_REGULAR_DISCONT_NUMBER(NUMBER) (((NUMBER) >= 1U) && ((NUMBER) <= 8U))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include ADC HAL Extension module */
+#include "stm32f1xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group1
+ * @{
+ */
+
+
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+
+#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions ***********************************/
+HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, pADC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/* IO operation functions *****************************************************/
+
+/** @addtogroup ADC_Exported_Functions_Group2
+ * @{
+ */
+
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+/* Non-blocking mode: DMA */
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+
+/* Peripheral Control functions ***********************************************/
+/** @addtogroup ADC_Exported_Functions_Group3
+ * @{
+ */
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+/**
+ * @}
+ */
+
+
+/* Peripheral State functions *************************************************/
+/** @addtogroup ADC_Exported_Functions_Group4
+ * @{
+ */
+uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/* Internal HAL driver functions **********************************************/
+/** @addtogroup ADC_Private_Functions
+ * @{
+ */
+HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef ADC_ConversionStop_Disable(ADC_HandleTypeDef* hadc);
+void ADC_StabilizationTime(uint32_t DelayUs);
+void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma);
+void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma);
+void ADC_DMAError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F1xx_HAL_ADC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1