From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h | 710 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 710 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h
new file mode 100644
index 0000000..8133fd6
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h
@@ -0,0 +1,710 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_adc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of ADC HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_ADC_EX_H
+#define __STM32F1xx_HAL_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Types ADCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief ADC Configuration injected Channel structure definition
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
+ * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+ * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+ * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ExternalTrigInjecConv')
+ * - For all except parameters 'ExternalTrigInjecConv': ADC enabled without conversion on going on injected group.
+ */
+typedef struct
+{
+ uint32_t InjectedChannel; /*!< Selection of ADC channel to configure
+ This parameter can be a value of @ref ADC_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability.
+ Note: On STM32F1 devices with several ADC: Only ADC1 can access internal measurement channels (VrefInt/TempSensor)
+ Note: On STM32F10xx8 and STM32F10xxB devices: A low-amplitude voltage glitch may be generated (on ADC input 0) on the PA0 pin, when the ADC is converting with injection trigger.
+ It is advised to distribute the analog channels so that Channel 0 is configured as an injected channel.
+ Refer to errata sheet of these devices for more details. */
+ uint32_t InjectedRank; /*!< Rank in the injected group sequencer
+ This parameter must be a value of @ref ADCEx_injected_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits).
+ This parameter can be a value of @ref ADC_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (VrefInt/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 5us to 17.1us min). */
+ uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
+ Offset value must be a positive number.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+ this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+ uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+ To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ FunctionalState InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ FunctionalState AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+ This parameter can be set to ENABLE or DISABLE.
+ Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+ Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+ Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+ To maintain JAUTO always enabled, DMA must be configured in circular mode.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
+ If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+ If set to external trigger source, triggering is on event rising edge.
+ This parameter can be a value of @ref ADCEx_External_trigger_source_Injected
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef;
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/**
+ * @brief Structure definition of ADC multimode
+ * @note The setting of these parameters with function HAL_ADCEx_MultiModeConfigChannel() is conditioned to ADCs state (both ADCs of the common group).
+ * State of ADCs of the common group must be: disabled.
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
+ This parameter can be a value of @ref ADCEx_Common_mode
+ Note: In dual mode, a change of channel configuration generates a restart that can produce a loss of synchronization. It is recommended to disable dual mode before any configuration change.
+ Note: In case of simultaneous mode used: Exactly the same sampling time should be configured for the 2 channels that will be sampled simultaneously by ACD1 and ADC2.
+ Note: In case of interleaved mode used: To avoid overlap between conversions, maximum sampling time allowed is 7 ADC clock cycles for fast interleaved mode and 14 ADC clock cycles for slow interleaved mode.
+ Note: Some multimode parameters are fixed on STM32F1 and can be configured on other STM32 devices with several ADC (multimode configuration structure can have additional parameters).
+ The equivalences are:
+ - Parameter 'DMAAccessMode': On STM32F1, this parameter is fixed to 1 DMA channel (one DMA channel for both ADC, DMA of ADC master). On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_DMAACCESSMODE_12_10_BITS'.
+ - Parameter 'TwoSamplingDelay': On STM32F1, this parameter is fixed to 7 or 14 ADC clock cycles depending on fast or slow interleaved mode selected. On other STM32 devices with several ADC, this is equivalent to parameter 'ADC_TWOSAMPLINGDELAY_7CYCLES' (for fast interleaved mode). */
+
+
+}ADC_MultiModeTypeDef;
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+ * @}
+ */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADCEx_Exported_Constants ADCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup ADCEx_injected_rank ADCEx rank into injected group
+ * @{
+ */
+#define ADC_INJECTED_RANK_1 0x00000001U
+#define ADC_INJECTED_RANK_2 0x00000002U
+#define ADC_INJECTED_RANK_3 0x00000003U
+#define ADC_INJECTED_RANK_4 0x00000004U
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected ADCEx external trigger enable for injected group
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE 0x00000000U
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_CR2_JEXTTRIG)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_source_Regular ADC External trigger selection for regular group
+ * @{
+ */
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target, sorted by trigger name: */
+
+/*!< External triggers of regular group for ADC1&ADC2 only */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/*!< External triggers of regular group for ADC3 only */
+#define ADC_EXTERNALTRIGCONV_T2_CC3 ADC3_EXTERNALTRIG_T2_CC3
+#define ADC_EXTERNALTRIGCONV_T3_CC1 ADC3_EXTERNALTRIG_T3_CC1
+#define ADC_EXTERNALTRIGCONV_T5_CC1 ADC3_EXTERNALTRIG_T5_CC1
+#define ADC_EXTERNALTRIGCONV_T5_CC3 ADC3_EXTERNALTRIG_T5_CC3
+#define ADC_EXTERNALTRIGCONV_T8_CC1 ADC3_EXTERNALTRIG_T8_CC1
+#endif /* STM32F103xE || defined STM32F103xG */
+
+/*!< External triggers of regular group for all ADC instances */
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_3_EXTERNALTRIG_T1_CC3
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+/*!< Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and */
+/* XL-density devices. */
+/* To use it on ADC or ADC2, a remap of trigger must be done from */
+/* EXTI line 11 to TIM8_TRGO with macro: */
+/* __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() */
+/* __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() */
+
+/* Note for internal constant value management: If TIM8_TRGO is available, */
+/* its definition is set to value for ADC1&ADC2 by default and changed to */
+/* value for ADC3 by HAL ADC driver if ADC3 is selected. */
+#define ADC_EXTERNALTRIGCONV_T8_TRGO ADC1_2_EXTERNALTRIG_T8_TRGO
+#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+#define ADC_SOFTWARE_START ADC1_2_3_SWSTART
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_source_Injected ADCEx External trigger selection for injected group
+ * @{
+ */
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target, sorted by trigger name: */
+
+/*!< External triggers of injected group for ADC1&ADC2 only */
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/*!< External triggers of injected group for ADC3 only */
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ADC3_EXTERNALTRIGINJEC_T4_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ADC3_EXTERNALTRIGINJEC_T8_CC2
+#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ADC3_EXTERNALTRIGINJEC_T5_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ADC3_EXTERNALTRIGINJEC_T5_CC4
+#endif /* STM32F103xE || defined STM32F103xG */
+
+/*!< External triggers of injected group for all ADC instances */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO
+
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
+/*!< Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and */
+/* XL-density devices. */
+/* To use it on ADC1 or ADC2, a remap of trigger must be done from */
+/* EXTI line 11 to TIM8_CC4 with macro: */
+/* __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() */
+/* __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() */
+
+/* Note for internal constant value management: If TIM8_CC4 is available, */
+/* its definition is set to value for ADC1&ADC2 by default and changed to */
+/* value for ADC3 by HAL ADC driver if ADC3 is selected. */
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T8_CC4
+#endif /* STM32F101xE || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
+
+#define ADC_INJECTED_SOFTWARE_START ADC1_2_3_JSWSTART
+/**
+ * @}
+ */
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/** @defgroup ADCEx_Common_mode ADC Extended Dual ADC Mode
+ * @{
+ */
+#define ADC_MODE_INDEPENDENT 0x00000000U /*!< ADC dual mode disabled (ADC independent mode) */
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)( ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined regular simultaneous + injected simultaneous mode, on groups regular and injected */
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)( ADC_CR1_DUALMOD_1 )) /*!< ADC dual mode enabled: Combined regular simultaneous + alternate trigger mode, on groups regular and injected */
+#define ADC_DUALMODE_INJECSIMULT_INTERLFAST ((uint32_t)( ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Combined injected simultaneous + fast interleaved mode, on groups regular and injected (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_INJECSIMULT_INTERLSLOW ((uint32_t)( ADC_CR1_DUALMOD_2 )) /*!< ADC dual mode enabled: Combined injected simultaneous + slow Interleaved mode, on groups regular and injected (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_INJECSIMULT ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Injected simultaneous mode, on group injected */
+#define ADC_DUALMODE_REGSIMULT ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 )) /*!< ADC dual mode enabled: Regular simultaneous mode, on group regular */
+#define ADC_DUALMODE_INTERLFAST ((uint32_t)( ADC_CR1_DUALMOD_2 | ADC_CR1_DUALMOD_1 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Fast interleaved mode, on group regular (delay between ADC sampling phases: 7 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_INTERLSLOW ((uint32_t)(ADC_CR1_DUALMOD_3 )) /*!< ADC dual mode enabled: Slow interleaved mode, on group regular (delay between ADC sampling phases: 14 ADC clock cycles (equivalent to parameter "TwoSamplingDelay" set to "ADC_TWOSAMPLINGDELAY_7CYCLES" on other STM32 devices)) */
+#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CR1_DUALMOD_3 | ADC_CR1_DUALMOD_0)) /*!< ADC dual mode enabled: Alternate trigger mode, on group injected */
+/**
+ * @}
+ */
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+ * @}
+ */
+
+
+/* Private constants ---------------------------------------------------------*/
+
+/** @addtogroup ADCEx_Private_Constants ADCEx Private Constants
+ * @{
+ */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Regular ADC Extended Internal HAL driver trigger selection for regular group
+ * @{
+ */
+/* List of external triggers of regular group for ADC1, ADC2, ADC3 (if ADC */
+/* instance is available on the selected device). */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+
+/* External triggers of regular group for ADC1&ADC2 (if ADCx available) */
+#define ADC1_2_EXTERNALTRIG_T1_CC1 0x00000000U
+#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)( ADC_CR2_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)( ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 ))
+#define ADC1_2_EXTERNALTRIG_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 ))
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG)
+/* Note: TIM8_TRGO is available on ADC1 and ADC2 only in high-density and */
+/* XL-density devices. */
+#define ADC1_2_EXTERNALTRIG_T8_TRGO ADC1_2_EXTERNALTRIG_EXT_IT11
+#endif
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/* External triggers of regular group for ADC3 */
+#define ADC3_EXTERNALTRIG_T3_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC3_EXTERNALTRIG_T2_CC3 ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC3_EXTERNALTRIG_T8_CC1 ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC3_EXTERNALTRIG_T8_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC3_EXTERNALTRIG_T5_CC1 ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC3_EXTERNALTRIG_T5_CC3 ADC1_2_EXTERNALTRIG_EXT_IT11
+#endif
+
+/* External triggers of regular group for ADC1&ADC2&ADC3 (if ADCx available) */
+#define ADC1_2_3_EXTERNALTRIG_T1_CC3 ((uint32_t)( ADC_CR2_EXTSEL_1 ))
+#define ADC1_2_3_SWSTART ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADC Extended Internal HAL driver trigger selection for injected group
+ * @{
+ */
+/* List of external triggers of injected group for ADC1, ADC2, ADC3 (if ADC */
+/* instance is available on the selected device). */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+
+/* External triggers of injected group for ADC1&ADC2 (if ADCx available) */
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_1 ))
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)( ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 ))
+#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 ))
+#if defined (STM32F101xE) || defined (STM32F103xE) || defined (STM32F103xG)
+/* Note: TIM8_CC4 is available on ADC1 and ADC2 only in high-density and */
+/* XL-density devices. */
+#define ADC1_2_EXTERNALTRIGINJEC_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+#endif
+
+#if defined (STM32F103xE) || defined (STM32F103xG)
+/* External triggers of injected group for ADC3 */
+#define ADC3_EXTERNALTRIGINJEC_T4_CC3 ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC3_EXTERNALTRIGINJEC_T8_CC2 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC3_EXTERNALTRIGINJEC_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC3_EXTERNALTRIGINJEC_T5_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC3_EXTERNALTRIGINJEC_T5_CC4 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+#endif /* STM32F103xE || defined STM32F103xG */
+
+/* External triggers of injected group for ADC1&ADC2&ADC3 (if ADCx available) */
+#define ADC1_2_3_EXTERNALTRIGINJEC_T1_TRGO 0x00000000U
+#define ADC1_2_3_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)( ADC_CR2_JEXTSEL_0))
+#define ADC1_2_3_JSWSTART ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup ADCEx_Private_Macro ADCEx Private Macro
+ * @{
+ */
+/* Macro reserved for internal HAL driver usage, not intended to be used in */
+/* code of final user. */
+
+
+/**
+ * @brief For devices with 3 ADCs: Defines the external trigger source
+ * for regular group according to ADC into common group ADC1&ADC2 or
+ * ADC3 (some triggers with same source have different value to
+ * be programmed into ADC EXTSEL bits of CR2 register).
+ * For devices with 2 ADCs or less: this macro makes no change.
+ * @param __HANDLE__: ADC handle
+ * @param __EXT_TRIG_CONV__: External trigger selected for regular group.
+ * @retval External trigger to be programmed into EXTSEL bits of CR2 register
+ */
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \
+ (( (((__HANDLE__)->Instance) == ADC3) \
+ )? \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T8_TRGO \
+ )? \
+ (ADC3_EXTERNALTRIG_T8_TRGO) \
+ : \
+ (__EXT_TRIG_CONV__) \
+ ) \
+ : \
+ (__EXT_TRIG_CONV__) \
+ )
+#else
+#define ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \
+ (__EXT_TRIG_CONV__)
+#endif /* STM32F103xE || STM32F103xG */
+
+/**
+ * @brief For devices with 3 ADCs: Defines the external trigger source
+ * for injected group according to ADC into common group ADC1&ADC2 or
+ * ADC3 (some triggers with same source have different value to
+ * be programmed into ADC JEXTSEL bits of CR2 register).
+ * For devices with 2 ADCs or less: this macro makes no change.
+ * @param __HANDLE__: ADC handle
+ * @param __EXT_TRIG_INJECTCONV__: External trigger selected for injected group.
+ * @retval External trigger to be programmed into JEXTSEL bits of CR2 register
+ */
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \
+ (( (((__HANDLE__)->Instance) == ADC3) \
+ )? \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4 \
+ )? \
+ (ADC3_EXTERNALTRIGINJEC_T8_CC4) \
+ : \
+ (__EXT_TRIG_INJECTCONV__) \
+ ) \
+ : \
+ (__EXT_TRIG_INJECTCONV__) \
+ )
+#else
+#define ADC_CFGR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \
+ (__EXT_TRIG_INJECTCONV__)
+#endif /* STM32F103xE || STM32F103xG */
+
+
+/**
+ * @brief Verification if multimode is enabled for the selected ADC (multimode ADC master or ADC slave) (applicable for devices with several ADCs)
+ * @param __HANDLE__: ADC handle
+ * @retval Multimode state: RESET if multimode is disabled, other value if multimode is enabled
+ */
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_MULTIMODE_IS_ENABLE(__HANDLE__) \
+ (( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2) \
+ )? \
+ (ADC1->CR1 & ADC_CR1_DUALMOD) \
+ : \
+ (RESET) \
+ )
+#else
+#define ADC_MULTIMODE_IS_ENABLE(__HANDLE__) \
+ (RESET)
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+ * @brief Verification of condition for ADC start conversion: ADC must be in non-multimode, or multimode with handle of ADC master (applicable for devices with several ADCs)
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \
+ (( (((__HANDLE__)->Instance) == ADC2) \
+ )? \
+ ((ADC1->CR1 & ADC_CR1_DUALMOD) == RESET) \
+ : \
+ (!RESET) \
+ )
+#else
+#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \
+ (!RESET)
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+ * @brief Check ADC multimode setting: In case of multimode, check whether ADC master of the selected ADC has feature auto-injection enabled (applicable for devices with several ADCs)
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__) \
+ (( (((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2) \
+ )? \
+ (ADC1->CR1 & ADC_CR1_JAUTO) \
+ : \
+ (RESET) \
+ )
+#else
+#define ADC_MULTIMODE_AUTO_INJECTED(__HANDLE__) \
+ (RESET)
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/**
+ * @brief Set handle of the other ADC sharing the common multimode settings
+ * @param __HANDLE__: ADC handle
+ * @param __HANDLE_OTHER_ADC__: other ADC handle
+ * @retval None
+ */
+#define ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__) \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC2)
+
+/**
+ * @brief Set handle of the ADC slave associated to the ADC master
+ * On STM32F1 devices, ADC slave is always ADC2 (this can be different
+ * on other STM32 devices)
+ * @param __HANDLE_MASTER__: ADC master handle
+ * @param __HANDLE_SLAVE__: ADC slave handle
+ * @retval None
+ */
+#define ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \
+ ((__HANDLE_SLAVE__)->Instance = ADC2)
+
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_2) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_3) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_4))
+
+#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING))
+
+/** @defgroup ADCEx_injected_nb_conv_verification ADCEx injected nb conv verification
+ * @{
+ */
+#define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= 1U) && ((LENGTH) <= 4U))
+/**
+ * @}
+ */
+
+#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+#if defined (STM32F101xE)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+#if defined (STM32F101xG)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_SOFTWARE_START))
+#endif
+
+#if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101x6) || defined (STM32F101xB) || defined (STM32F102x6) || defined (STM32F102xB) || defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+#if defined (STM32F101xE)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+#if defined (STM32F101xG)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+#if defined (STM32F103xE) || defined (STM32F103xG)
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((REGTRIG) == ADC_INJECTED_SOFTWARE_START))
+#endif
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
+ ((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLFAST) || \
+ ((MODE) == ADC_DUALMODE_INJECSIMULT_INTERLSLOW) || \
+ ((MODE) == ADC_DUALMODE_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT) || \
+ ((MODE) == ADC_DUALMODE_INTERLFAST) || \
+ ((MODE) == ADC_DUALMODE_INTERLSLOW) || \
+ ((MODE) == ADC_DUALMODE_ALTERTRIG) )
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/**
+ * @}
+ */
+
+
+
+
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* ADC calibration */
+HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc);
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+/* ADC multimode */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc);
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef *hadc);
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */
+void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+/**
+ * @}
+ */
+
+
+/* Peripheral Control functions ***********************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+#if defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F105xC) || defined (STM32F107xC) || defined (STM32F103xE) || defined (STM32F103xG)
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode);
+#endif /* defined STM32F103x6 || defined STM32F103xB || defined STM32F105xC || defined STM32F107xC || defined STM32F103xE || defined STM32F103xG */
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1