From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cec.h | 552 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 552 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cec.h b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cec.h
new file mode 100644
index 0000000..2023dcd
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cec.h
@@ -0,0 +1,552 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_cec.h
+ * @author MCD Application Team
+ * @brief Header file of CEC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_CEC_H
+#define __STM32F1xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+#if defined (CEC)
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CEC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CEC_Exported_Types CEC Exported Types
+ * @{
+ */
+/**
+ * @brief CEC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t TimingErrorFree; /*!< Configures the CEC Bit Timing Error Mode.
+ This parameter can be a value of @ref CEC_BitTimingErrorMode */
+ uint32_t PeriodErrorFree; /*!< Configures the CEC Bit Period Error Mode.
+ This parameter can be a value of @ref CEC_BitPeriodErrorMode */
+ uint16_t OwnAddress; /*!< Own addresses configuration
+ This parameter can be a value of @ref CEC_OWN_ADDRESS */
+ uint8_t *RxBuffer; /*!< CEC Rx buffer pointeur */
+}CEC_InitTypeDef;
+
+/**
+ * @brief HAL CEC State structures definition
+ * @note HAL CEC State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains CEC state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7 (not used)
+ * x : Should be set to 0
+ * b6 Error information
+ * 0 : No Error
+ * 1 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP initialized. HAL CEC Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
+ */
+typedef enum
+{
+ HAL_CEC_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
+ Value is allowed for gState and RxState */
+ HAL_CEC_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_CEC_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
+ Value is allowed for gState only */
+ HAL_CEC_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_CEC_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_CEC_STATE_BUSY_RX_TX = 0x23U, /*!< an internal process is ongoing
+ Value is allowed for gState only */
+ HAL_CEC_STATE_ERROR = 0x60U /*!< Error Value is allowed for gState only */
+}HAL_CEC_StateTypeDef;
+
+/**
+ * @brief CEC handle Structure definition
+ */
+typedef struct __CEC_HandleTypeDef
+{
+ CEC_TypeDef *Instance; /*!< CEC registers base address */
+
+ CEC_InitTypeDef Init; /*!< CEC communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */
+
+ uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */
+
+ uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_CEC_StateTypeDef */
+
+ HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations.
+ This parameter can be a value of @ref HAL_CEC_StateTypeDef */
+
+ uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register
+ in case error is reported */
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+ void (* TxCpltCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC Tx Transfer completed callback */
+ void (* RxCpltCallback) ( struct __CEC_HandleTypeDef * hcec, uint32_t RxFrameSize); /*!< CEC Rx Transfer completed callback */
+ void (* ErrorCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC error callback */
+
+ void (* MspInitCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC Msp Init callback */
+ void (* MspDeInitCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC Msp DeInit callback */
+
+#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */
+}CEC_HandleTypeDef;
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+/**
+ * @brief HAL CEC Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_CEC_TX_CPLT_CB_ID = 0x00U, /*!< CEC Tx Transfer completed callback ID */
+ HAL_CEC_RX_CPLT_CB_ID = 0x01U, /*!< CEC Rx Transfer completed callback ID */
+ HAL_CEC_ERROR_CB_ID = 0x02U, /*!< CEC error callback ID */
+ HAL_CEC_MSPINIT_CB_ID = 0x03U, /*!< CEC Msp Init callback ID */
+ HAL_CEC_MSPDEINIT_CB_ID = 0x04U /*!< CEC Msp DeInit callback ID */
+}HAL_CEC_CallbackIDTypeDef;
+
+/**
+ * @brief HAL CEC Callback pointer definition
+ */
+typedef void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef * hcec); /*!< pointer to an CEC callback function */
+typedef void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef * hcec, uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed callback function */
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+ * @{
+ */
+
+/** @defgroup CEC_Error_Code CEC Error Code
+ * @{
+ */
+#define HAL_CEC_ERROR_NONE 0x00000000U /*!< no error */
+#define HAL_CEC_ERROR_BTE CEC_ESR_BTE /*!< Bit Timing Error */
+#define HAL_CEC_ERROR_BPE CEC_ESR_BPE /*!< Bit Period Error */
+#define HAL_CEC_ERROR_RBTFE CEC_ESR_RBTFE /*!< Rx Block Transfer Finished Error */
+#define HAL_CEC_ERROR_SBE CEC_ESR_SBE /*!< Start Bit Error */
+#define HAL_CEC_ERROR_ACKE CEC_ESR_ACKE /*!< Block Acknowledge Error */
+#define HAL_CEC_ERROR_LINE CEC_ESR_LINE /*!< Line Error */
+#define HAL_CEC_ERROR_TBTFE CEC_ESR_TBTFE /*!< Tx Block Transfer Finished Error */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+#define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback Error */
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BitTimingErrorMode Bit Timing Error Mode
+ * @{
+ */
+#define CEC_BIT_TIMING_ERROR_MODE_STANDARD 0x00000000U /*!< Bit timing error Standard Mode */
+#define CEC_BIT_TIMING_ERROR_MODE_ERRORFREE CEC_CFGR_BTEM /*!< Bit timing error Free Mode */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BitPeriodErrorMode Bit Period Error Mode
+ * @{
+ */
+#define CEC_BIT_PERIOD_ERROR_MODE_STANDARD 0x00000000U /*!< Bit period error Standard Mode */
+#define CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header
+ * @{
+ */
+#define CEC_INITIATOR_LSB_POS 4U
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OWN_ADDRESS CEC Own Address
+ * @{
+ */
+#define CEC_OWN_ADDRESS_NONE CEC_OWN_ADDRESS_0 /* Reset value */
+#define CEC_OWN_ADDRESS_0 ((uint16_t)0x0000U) /* Logical Address 0 */
+#define CEC_OWN_ADDRESS_1 ((uint16_t)0x0001U) /* Logical Address 1 */
+#define CEC_OWN_ADDRESS_2 ((uint16_t)0x0002U) /* Logical Address 2 */
+#define CEC_OWN_ADDRESS_3 ((uint16_t)0x0003U) /* Logical Address 3 */
+#define CEC_OWN_ADDRESS_4 ((uint16_t)0x0004U) /* Logical Address 4 */
+#define CEC_OWN_ADDRESS_5 ((uint16_t)0x0005U) /* Logical Address 5 */
+#define CEC_OWN_ADDRESS_6 ((uint16_t)0x0006U) /* Logical Address 6 */
+#define CEC_OWN_ADDRESS_7 ((uint16_t)0x0007U) /* Logical Address 7 */
+#define CEC_OWN_ADDRESS_8 ((uint16_t)0x0008U) /* Logical Address 8 */
+#define CEC_OWN_ADDRESS_9 ((uint16_t)0x0009U) /* Logical Address 9 */
+#define CEC_OWN_ADDRESS_10 ((uint16_t)0x000AU) /* Logical Address 10 */
+#define CEC_OWN_ADDRESS_11 ((uint16_t)0x000BU) /* Logical Address 11 */
+#define CEC_OWN_ADDRESS_12 ((uint16_t)0x000CU) /* Logical Address 12 */
+#define CEC_OWN_ADDRESS_13 ((uint16_t)0x000DU) /* Logical Address 13 */
+#define CEC_OWN_ADDRESS_14 ((uint16_t)0x000EU) /* Logical Address 14 */
+#define CEC_OWN_ADDRESS_15 ((uint16_t)0x000FU) /* Logical Address 15 */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Interrupts_Definitions Interrupts definition
+ * @{
+ */
+#define CEC_IT_IE CEC_CFGR_IE
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Flags_Definitions Flags definition
+ * @{
+ */
+#define CEC_FLAG_TSOM CEC_CSR_TSOM
+#define CEC_FLAG_TEOM CEC_CSR_TEOM
+#define CEC_FLAG_TERR CEC_CSR_TERR
+#define CEC_FLAG_TBTRF CEC_CSR_TBTRF
+#define CEC_FLAG_RSOM CEC_CSR_RSOM
+#define CEC_FLAG_REOM CEC_CSR_REOM
+#define CEC_FLAG_RERR CEC_CSR_RERR
+#define CEC_FLAG_RBTF CEC_CSR_RBTF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CEC handle gstate & RxState
+ * @param __HANDLE__: CEC handle.
+ * @retval None
+ */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \
+ } while(0)
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+
+/** @brief Checks whether or not the specified CEC interrupt flag is set.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * @arg CEC_FLAG_TERR: Tx Error
+ * @arg CEC_FLAG_TBTRF:Tx Block Transfer Finished
+ * @arg CEC_FLAG_RERR: Rx Error
+ * @arg CEC_FLAG_RBTF: Rx Block Transfer Finished
+ * @retval ITStatus
+ */
+#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) READ_BIT((__HANDLE__)->Instance->CSR,(__FLAG__))
+
+/** @brief Clears the CEC's pending flags.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg CEC_CSR_TERR: Tx Error
+ * @arg CEC_FLAG_TBTRF: Tx Block Transfer Finished
+ * @arg CEC_CSR_RERR: Rx Error
+ * @arg CEC_CSR_RBTF: Rx Block Transfer Finished
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+ do { \
+ uint32_t tmp = 0x0U; \
+ tmp = (__HANDLE__)->Instance->CSR & 0x00000002U; \
+ (__HANDLE__)->Instance->CSR &= (uint32_t)(((~(uint32_t)(__FLAG__)) & 0xFFFFFFFCU) | tmp);\
+ } while(0U)
+
+/** @brief Enables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to enable.
+ * This parameter can be:
+ * @arg CEC_IT_IE : Interrupt Enable.
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))
+
+/** @brief Disables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to disable.
+ * This parameter can be:
+ * @arg CEC_IT_IE : Interrupt Enable
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))
+
+/** @brief Checks whether or not the specified CEC interrupt is enabled.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to check.
+ * This parameter can be:
+ * @arg CEC_IT_IE : Interrupt Enable
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) READ_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))
+
+/** @brief Enables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE)
+
+/** @brief Disables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE)
+
+/** @brief Set Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM)
+
+/** @brief Set Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM)
+
+/** @brief Get Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM)
+
+/** @brief Get Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM)
+
+/** @brief Clear OAR register
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->OAR, CEC_OAR_OA)
+
+/** @brief Set OAR register
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __ADDRESS__: Own Address value.
+ * @retval none
+ */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) MODIFY_REG((__HANDLE__)->Instance->OAR, CEC_OAR_OA, (__ADDRESS__));
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions CEC Exported Functions
+ * @{
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, pCEC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec);
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group2 Input and Output operation functions
+ * @brief CEC Transmit/Receive functions
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress,uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t* Rxbuffer);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief CEC control functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CEC_Private_Types CEC Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Variables CEC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Macros CEC Private Macros
+ * @{
+ */
+#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BIT_TIMING_ERROR_MODE_STANDARD) || \
+ ((MODE) == CEC_BIT_TIMING_ERROR_MODE_ERRORFREE))
+
+#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BIT_PERIOD_ERROR_MODE_STANDARD) || \
+ ((MODE) == CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE))
+
+/** @brief Check CEC message size.
+ * The message size is the payload size: without counting the header,
+ * it varies from 0 byte (ping operation, one header only, no payload) to
+ * 15 bytes (1 opcode and up to 14 operands following the header).
+ * @param __SIZE__: CEC message size.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U)
+/** @brief Check CEC device Own Address Register (OAR) setting.
+ * @param __ADDRESS__: CEC own address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU)
+
+/** @brief Check CEC initiator or destination logical address setting.
+ * Initiator and destination addresses are coded over 4 bits.
+ * @param __ADDRESS__: CEC initiator or logical address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU)
+
+
+
+/**
+ * @}
+ */
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* CEC */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1