From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h | 412 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 412 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h
new file mode 100644
index 0000000..9185b6e
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h
@@ -0,0 +1,412 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of RTC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F1xx_HAL_RTC_EX_H
+#define __STM32F1xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTCEx
+ * @{
+ */
+
+/** @addtogroup RTCEx_Private_Macros
+ * @{
+ */
+
+/** @defgroup RTCEx_Alias_For_Legacy Alias define maintained for legacy
+ * @{
+ */
+#define HAL_RTCEx_TamperTimeStampIRQHandler HAL_RTCEx_TamperIRQHandler
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+ * @{
+ */
+#define IS_RTC_TAMPER(__TAMPER__) ((__TAMPER__) == RTC_TAMPER_1)
+
+#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+
+#if RTC_BKP_NUMBER > 10U
+#define IS_RTC_BKP(BKP) (((BKP) <= (uint32_t)RTC_BKP_DR10) || (((BKP) >= (uint32_t)RTC_BKP_DR11) && ((BKP) <= (uint32_t)RTC_BKP_DR42)))
+#else
+#define IS_RTC_BKP(BKP) ((BKP) <= (uint32_t)RTC_BKP_NUMBER)
+#endif
+#define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x0000007FU)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+ * @{
+ */
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+} RTC_TamperTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions Tamper Pins Definitions
+ * @{
+ */
+#define RTC_TAMPER_1 BKP_CR_TPE /*!< Select tamper to be enabled (mainly for legacy purposes) */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions Tamper Trigger Definitions
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_LOWLEVEL BKP_CR_TPAL /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
+#define RTC_TAMPERTRIGGER_HIGHLEVEL 0x00000000U /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Backup_Registers_Definitions Backup Registers Definitions
+ * @{
+ */
+#if RTC_BKP_NUMBER > 0U
+#define RTC_BKP_DR1 0x00000001U
+#define RTC_BKP_DR2 0x00000002U
+#define RTC_BKP_DR3 0x00000003U
+#define RTC_BKP_DR4 0x00000004U
+#define RTC_BKP_DR5 0x00000005U
+#define RTC_BKP_DR6 0x00000006U
+#define RTC_BKP_DR7 0x00000007U
+#define RTC_BKP_DR8 0x00000008U
+#define RTC_BKP_DR9 0x00000009U
+#define RTC_BKP_DR10 0x0000000AU
+#endif /* RTC_BKP_NUMBER > 0 */
+
+#if RTC_BKP_NUMBER > 10U
+#define RTC_BKP_DR11 0x00000010U
+#define RTC_BKP_DR12 0x00000011U
+#define RTC_BKP_DR13 0x00000012U
+#define RTC_BKP_DR14 0x00000013U
+#define RTC_BKP_DR15 0x00000014U
+#define RTC_BKP_DR16 0x00000015U
+#define RTC_BKP_DR17 0x00000016U
+#define RTC_BKP_DR18 0x00000017U
+#define RTC_BKP_DR19 0x00000018U
+#define RTC_BKP_DR20 0x00000019U
+#define RTC_BKP_DR21 0x0000001AU
+#define RTC_BKP_DR22 0x0000001BU
+#define RTC_BKP_DR23 0x0000001CU
+#define RTC_BKP_DR24 0x0000001DU
+#define RTC_BKP_DR25 0x0000001EU
+#define RTC_BKP_DR26 0x0000001FU
+#define RTC_BKP_DR27 0x00000020U
+#define RTC_BKP_DR28 0x00000021U
+#define RTC_BKP_DR29 0x00000022U
+#define RTC_BKP_DR30 0x00000023U
+#define RTC_BKP_DR31 0x00000024U
+#define RTC_BKP_DR32 0x00000025U
+#define RTC_BKP_DR33 0x00000026U
+#define RTC_BKP_DR34 0x00000027U
+#define RTC_BKP_DR35 0x00000028U
+#define RTC_BKP_DR36 0x00000029U
+#define RTC_BKP_DR37 0x0000002AU
+#define RTC_BKP_DR38 0x0000002BU
+#define RTC_BKP_DR39 0x0000002CU
+#define RTC_BKP_DR40 0x0000002DU
+#define RTC_BKP_DR41 0x0000002EU
+#define RTC_BKP_DR42 0x0000002FU
+#endif /* RTC_BKP_NUMBER > 10 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC Tamper interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP1: Tamper A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(BKP->CSR, (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Tamper interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP1: Tamper A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT(BKP->CSR, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & ((__INTERRUPT__))) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) ((((BKP->CSR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & (BKP_CSR_TEF)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT(BKP->CSR, BKP_CSR_CTE | BKP_CSR_CTI)
+
+/**
+ * @brief Enable the RTC Second interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_SEC: Second A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_SECOND_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Second interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_SEC: Second A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_SECOND_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Second interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_SEC: Second A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_SECOND_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Second's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_SEC
+ * @retval None
+ */
+#define __HAL_RTC_SECOND_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Second's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_SEC
+ * @retval None
+ */
+#define __HAL_RTC_SECOND_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
+
+/**
+ * @brief Enable the RTC Overflow interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_OW: Overflow A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_OVERFLOW_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Overflow interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_OW: Overflow A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_OVERFLOW_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Overflow interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_OW: Overflow A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_OVERFLOW_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__))) ) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Overflow's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_OW
+ * @retval None
+ */
+#define __HAL_RTC_OVERFLOW_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Overflow's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_OW
+ * @retval None
+ */
+#define __HAL_RTC_OVERFLOW_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTCEx_Exported_Functions
+ * @{
+ */
+
+/* RTC Tamper functions *****************************************/
+/** @addtogroup RTCEx_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/* RTC Second functions *****************************************/
+/** @addtogroup RTCEx_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc);
+
+/**
+ * @}
+ */
+
+/* Extension Control functions ************************************************/
+/** @addtogroup RTCEx_Exported_Functions_Group3
+ * @{
+ */
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F1xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1