From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h | 731 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 731 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h
new file mode 100644
index 0000000..49f223c
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h
@@ -0,0 +1,731 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_spi.h
+ * @author MCD Application Team
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32F1xx_HAL_SPI_H
+#define STM32F1xx_HAL_SPI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal_def.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_Mode */
+
+ uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
+ This parameter can be a value of @ref SPI_Direction */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_Data_Size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */
+} SPI_InitTypeDef;
+
+/**
+ * @brief HAL SPI State structure definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */
+ HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */
+} HAL_SPI_StateTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /*!< SPI registers base address */
+
+ SPI_InitTypeDef Init; /*!< SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< SPI Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< SPI Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */
+
+ __IO uint32_t ErrorCode; /*!< SPI Error code */
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */
+ void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */
+ void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */
+ void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */
+ void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */
+ void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */
+ void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */
+ void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */
+ void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */
+ void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */
+
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+} SPI_HandleTypeDef;
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+/**
+ * @brief HAL SPI Callback ID enumeration definition
+ */
+typedef enum
+{
+ HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */
+ HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */
+ HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */
+ HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */
+ HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */
+ HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */
+ HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */
+ HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */
+ HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */
+ HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */
+
+} HAL_SPI_CallbackIDTypeDef;
+
+/**
+ * @brief HAL SPI Callback pointer definition
+ */
+typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */
+
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+ * @{
+ */
+
+/** @defgroup SPI_Error_Code SPI Error Code
+ * @{
+ */
+#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */
+#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */
+#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */
+#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY Flag */
+#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Mode SPI Mode
+ * @{
+ */
+#define SPI_MODE_SLAVE (0x00000000U)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction SPI Direction Mode
+ * @{
+ */
+#define SPI_DIRECTION_2LINES (0x00000000U)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Data_Size SPI Data Size
+ * @{
+ */
+#define SPI_DATASIZE_8BIT (0x00000000U)
+#define SPI_DATASIZE_16BIT SPI_CR1_DFF
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+ * @{
+ */
+#define SPI_POLARITY_LOW (0x00000000U)
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+ * @{
+ */
+#define SPI_PHASE_1EDGE (0x00000000U)
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select Management
+ * @{
+ */
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT (0x00000000U)
+#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+ * @{
+ */
+#define SPI_BAUDRATEPRESCALER_2 (0x00000000U)
+#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2)
+#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission
+ * @{
+ */
+#define SPI_FIRSTBIT_MSB (0x00000000U)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode SPI TI Mode
+ * @{
+ */
+#define SPI_TIMODE_DISABLE (0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+ * @{
+ */
+#define SPI_CRCCALCULATION_DISABLE (0x00000000U)
+#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Flags_definition SPI Flags Definition
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
+#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
+#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
+#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
+#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY\
+ | SPI_SR_CRCERR | SPI_SR_MODF | SPI_SR_OVR)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPI handle state.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_SPI_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+
+/** @brief Enable the specified SPI interrupts.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+
+/** @brief Disable the specified SPI interrupts.
+ * @param __HANDLE__ specifies the SPI handle.
+ * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+
+/** @brief Check whether the specified SPI interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__ specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\
+ & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the SPI CRCERR pending flag.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
+
+/** @brief Clear the SPI MODF pending flag.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_modf = 0x00U; \
+ tmpreg_modf = (__HANDLE__)->Instance->SR; \
+ CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \
+ UNUSED(tmpreg_modf); \
+ } while(0U)
+
+/** @brief Clear the SPI OVR pending flag.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg_ovr = 0x00U; \
+ tmpreg_ovr = (__HANDLE__)->Instance->DR; \
+ tmpreg_ovr = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg_ovr); \
+ } while(0U)
+
+/** @brief Enable the SPI peripheral.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+
+/** @brief Disable the SPI peripheral.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SPI_Private_Constants SPI Private Constants
+ * @{
+ */
+#define SPI_INVALID_CRC_ERROR 0U /* CRC error wrongly detected */
+#define SPI_VALID_CRC_ERROR 1U /* CRC error is true */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros SPI Private Macros
+ * @{
+ */
+
+/** @brief Set the SPI transmit-only mode.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief Set the SPI receive-only mode.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief Reset the CRC calculation of the SPI.
+ * @param __HANDLE__ specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
+ SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U)
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __SR__ copy of SPI SR register.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @retval SET or RESET.
+ */
+#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \
+ ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI Interrupt is set or not.
+ * @param __CR2__ copy of SPI CR2 register.
+ * @param __INTERRUPT__ specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval SET or RESET.
+ */
+#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \
+ (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks if SPI Mode parameter is in allowed range.
+ * @param __MODE__ specifies the SPI Mode.
+ * This parameter can be a value of @ref SPI_Mode
+ * @retval None
+ */
+#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \
+ ((__MODE__) == SPI_MODE_MASTER))
+
+/** @brief Checks if SPI Direction Mode parameter is in allowed range.
+ * @param __MODE__ specifies the SPI Direction Mode.
+ * This parameter can be a value of @ref SPI_Direction
+ * @retval None
+ */
+#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
+ ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((__MODE__) == SPI_DIRECTION_1LINE))
+
+/** @brief Checks if SPI Direction Mode parameter is 2 lines.
+ * @param __MODE__ specifies the SPI Direction Mode.
+ * @retval None
+ */
+#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES)
+
+/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines.
+ * @param __MODE__ specifies the SPI Direction Mode.
+ * @retval None
+ */
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
+ ((__MODE__) == SPI_DIRECTION_1LINE))
+
+/** @brief Checks if SPI Data Size parameter is in allowed range.
+ * @param __DATASIZE__ specifies the SPI Data Size.
+ * This parameter can be a value of @ref SPI_Data_Size
+ * @retval None
+ */
+#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_8BIT))
+
+/** @brief Checks if SPI Serial clock steady state parameter is in allowed range.
+ * @param __CPOL__ specifies the SPI serial clock steady state.
+ * This parameter can be a value of @ref SPI_Clock_Polarity
+ * @retval None
+ */
+#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \
+ ((__CPOL__) == SPI_POLARITY_HIGH))
+
+/** @brief Checks if SPI Clock Phase parameter is in allowed range.
+ * @param __CPHA__ specifies the SPI Clock Phase.
+ * This parameter can be a value of @ref SPI_Clock_Phase
+ * @retval None
+ */
+#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \
+ ((__CPHA__) == SPI_PHASE_2EDGE))
+
+/** @brief Checks if SPI Slave Select parameter is in allowed range.
+ * @param __NSS__ specifies the SPI Slave Select management parameter.
+ * This parameter can be a value of @ref SPI_Slave_Select_management
+ * @retval None
+ */
+#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \
+ ((__NSS__) == SPI_NSS_HARD_INPUT) || \
+ ((__NSS__) == SPI_NSS_HARD_OUTPUT))
+
+/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range.
+ * @param __PRESCALER__ specifies the SPI Baudrate prescaler.
+ * This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ * @retval None
+ */
+#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256))
+
+/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range.
+ * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit).
+ * This parameter can be a value of @ref SPI_MSB_LSB_transmission
+ * @retval None
+ */
+#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \
+ ((__BIT__) == SPI_FIRSTBIT_LSB))
+
+/** @brief Checks if SPI TI mode parameter is disabled.
+ * @param __MODE__ SPI_TIMODE_DISABLE. Device not support Ti Mode.
+ * This parameter can be a value of @ref SPI_TI_mode
+ * @retval None
+ */
+#define IS_SPI_TIMODE(__MODE__) ((__MODE__) == SPI_TIMODE_DISABLE)
+
+/** @brief Checks if SPI CRC calculation enabled state is in allowed range.
+ * @param __CALCULATION__ specifies the SPI CRC calculation enable state.
+ * This parameter can be a value of @ref SPI_CRC_Calculation
+ * @retval None
+ */
+#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \
+ ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE))
+
+/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range.
+ * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation.
+ * This parameter must be a number between Min_Data = 0 and Max_Data = 65535
+ * @retval None
+ */
+#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && \
+ ((__POLYNOMIAL__) <= 0xFFFFU) && \
+ (((__POLYNOMIAL__)&0x1U) != 0U))
+
+/** @brief Checks if DMA handle is valid.
+ * @param __HANDLE__ specifies a DMA Handle.
+ * @retval None
+ */
+#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL)
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPI_Private_Functions SPI Private Functions
+ * @{
+ */
+uint8_t SPI_ISCRCErrorValid(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+
+/* Callbacks Register/UnRegister functions ***********************************/
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size,
+ uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
+ uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
+ uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+/* Transfer Abort functions */
+HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32F1xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1