From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cec.c | 1005 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 1,005 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cec.c b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cec.c
new file mode 100644
index 0000000..faf8d6f
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cec.c
@@ -0,0 +1,1005 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_cec.c
+ * @author MCD Application Team
+ * @brief CEC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the High Definition Multimedia Interface
+ * Consumer Electronics Control Peripheral (CEC).
+ * + Initialization and de-initialization function
+ * + IO operation function
+ * + Peripheral Control function
+ *
+ *
+ @verbatim
+ ===============================================================================
+ ##### How to use this driver #####
+ ===============================================================================
+ [..]
+ The CEC HAL driver can be used as follow:
+
+ (#) Declare a CEC_HandleTypeDef handle structure.
+ (#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API:
+ (##) Enable the CEC interface clock.
+ (##) CEC pins configuration:
+ (+++) Enable the clock for the CEC GPIOs.
+ (+++) Configure these CEC pins as alternate function pull-up.
+ (##) NVIC configuration if you need to use interrupt process (HAL_CEC_Transmit_IT()
+ and HAL_CEC_Receive_IT() APIs):
+ (+++) Configure the CEC interrupt priority.
+ (+++) Enable the NVIC CEC IRQ handle.
+ (+++) The specific CEC interrupts (Transmission complete interrupt,
+ RXNE interrupt and Error Interrupts) will be managed using the macros
+ __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit
+ and receive process.
+
+ (#) Program the Bit Timing Error Mode and the Bit Period Error Mode in the hcec Init structure.
+
+ (#) Initialize the CEC registers by calling the HAL_CEC_Init() API.
+
+ [..]
+ (@) This API (HAL_CEC_Init()) configures also the low level Hardware (GPIO, CLOCK, CORTEX...etc)
+ by calling the customed HAL_CEC_MspInit() API.
+ *** Callback registration ***
+ =============================================
+ The compilation define USE_HAL_CEC_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+ Use Functions @ref HAL_CEC_RegisterCallback() or HAL_CEC_RegisterXXXCallback()
+ to register an interrupt callback.
+
+ Function @ref HAL_CEC_RegisterCallback() allows to register following callbacks:
+ (+) TxCpltCallback : Tx Transfer completed callback.
+ (+) ErrorCallback : callback for error detection.
+ (+) MspInitCallback : CEC MspInit.
+ (+) MspDeInitCallback : CEC MspDeInit.
+ This function takes as parameters the HAL peripheral handle, the Callback ID
+ and a pointer to the user callback function.
+
+ For specific callback HAL_CEC_RxCpltCallback use dedicated register callbacks
+ @ref HAL_CEC_RegisterRxCpltCallback().
+
+ Use function @ref HAL_CEC_UnRegisterCallback() to reset a callback to the default
+ weak function.
+ @ref HAL_CEC_UnRegisterCallback() takes as parameters the HAL peripheral handle,
+ and the Callback ID.
+ This function allows to reset following callbacks:
+ (+) TxCpltCallback : Tx Transfer completed callback.
+ (+) ErrorCallback : callback for error detection.
+ (+) MspInitCallback : CEC MspInit.
+ (+) MspDeInitCallback : CEC MspDeInit.
+
+ For callback HAL_CEC_RxCpltCallback use dedicated unregister callback :
+ @ref HAL_CEC_UnRegisterRxCpltCallback().
+
+ By default, after the @ref HAL_CEC_Init() and when the state is HAL_CEC_STATE_RESET
+ all callbacks are set to the corresponding weak functions :
+ examples @ref HAL_CEC_TxCpltCallback() , @ref HAL_CEC_RxCpltCallback().
+ Exception done for MspInit and MspDeInit functions that are
+ reset to the legacy weak function in the @ref HAL_CEC_Init()/ @ref HAL_CEC_DeInit() only when
+ these callbacks are null (not registered beforehand).
+ if not, MspInit or MspDeInit are not null, the @ref HAL_CEC_Init() / @ref HAL_CEC_DeInit()
+ keep and use the user MspInit/MspDeInit functions (registered beforehand)
+
+ Callbacks can be registered/unregistered in HAL_CEC_STATE_READY state only.
+ Exception done MspInit/MspDeInit callbacks that can be registered/unregistered
+ in HAL_CEC_STATE_READY or HAL_CEC_STATE_RESET state,
+ thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using @ref HAL_CEC_RegisterCallback() before calling @ref HAL_CEC_DeInit()
+ or @ref HAL_CEC_Init() function.
+
+ When the compilation define USE_HAL_CEC_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registration feature is not available and all callbacks
+ are set to the corresponding weak functions.
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+#ifdef HAL_CEC_MODULE_ENABLED
+
+#if defined (CEC)
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CEC CEC
+ * @brief HAL CEC module driver
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+ * @{
+ */
+#define CEC_CFGR_FIELDS (CEC_CFGR_BTEM | CEC_CFGR_BPEM )
+#define CEC_FLAG_TRANSMIT_MASK (CEC_FLAG_TSOM|CEC_FLAG_TEOM|CEC_FLAG_TBTRF)
+#define CEC_FLAG_RECEIVE_MASK (CEC_FLAG_RSOM|CEC_FLAG_REOM|CEC_FLAG_RBTF)
+#define CEC_ESR_ALL_ERROR (CEC_ESR_BTE|CEC_ESR_BPE|CEC_ESR_RBTFE|CEC_ESR_SBE|CEC_ESR_ACKE|CEC_ESR_LINE|CEC_ESR_TBTFE)
+#define CEC_RXXFERSIZE_INITIALIZE 0xFFFF /*!< Value used to initialise the RxXferSize of the handle */
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+ * @{
+ */
+static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec);
+static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CEC_Exported_Functions CEC Exported Functions
+ * @{
+ */
+
+/** @defgroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to initialize the CEC
+ (+) The following parameters need to be configured:
+ (++) TimingErrorFree
+ (++) PeriodErrorFree
+ (++) InitiatorAddress
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the CEC mode according to the specified
+ * parameters in the CEC_InitTypeDef and creates the associated handle .
+ * @param hcec: CEC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec)
+{
+ /* Check the CEC handle allocation */
+ if((hcec == NULL) ||(hcec->Init.RxBuffer == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+ assert_param(IS_CEC_BIT_TIMING_ERROR_MODE(hcec->Init.TimingErrorFree));
+ assert_param(IS_CEC_BIT_PERIOD_ERROR_MODE(hcec->Init.PeriodErrorFree));
+ assert_param(IS_CEC_ADDRESS(hcec->Init.OwnAddress));
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+ if(hcec->gState == HAL_CEC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hcec->Lock = HAL_UNLOCKED;
+
+ hcec->TxCpltCallback = HAL_CEC_TxCpltCallback; /* Legacy weak TxCpltCallback */
+ hcec->RxCpltCallback = HAL_CEC_RxCpltCallback; /* Legacy weak RxCpltCallback */
+ hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */
+
+ if(hcec->MspInitCallback == NULL)
+ {
+ hcec->MspInitCallback = HAL_CEC_MspInit; /* Legacy weak MspInit */
+ }
+
+ /* Init the low level hardware */
+ hcec->MspInitCallback(hcec);
+ }
+#else
+ if(hcec->gState == HAL_CEC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hcec->Lock = HAL_UNLOCKED;
+ /* Init the low level hardware : GPIO, CLOCK */
+ HAL_CEC_MspInit(hcec);
+ }
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+
+ hcec->gState = HAL_CEC_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_CEC_DISABLE(hcec);
+
+ /* Write to CEC Control Register */
+ MODIFY_REG(hcec->Instance->CFGR, CEC_CFGR_FIELDS, hcec->Init.TimingErrorFree | hcec->Init.PeriodErrorFree);
+
+ /* Write to CEC Own Address Register */
+ MODIFY_REG(hcec->Instance->OAR, CEC_OAR_OA, hcec->Init.OwnAddress);
+
+ /* Configure the prescaler to generate the required 50 microseconds time base.*/
+ MODIFY_REG(hcec->Instance->PRES, CEC_PRES_PRES, 50U * (HAL_RCC_GetPCLK1Freq()/1000000U) - 1U);
+
+ /* Enable the following CEC Interrupt */
+ __HAL_CEC_ENABLE_IT(hcec, CEC_IT_IE);
+
+ /* Enable the CEC Peripheral */
+ __HAL_CEC_ENABLE(hcec);
+
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ hcec->gState = HAL_CEC_STATE_READY;
+ hcec->RxState = HAL_CEC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the CEC peripheral
+ * @param hcec: CEC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec)
+{
+ /* Check the CEC handle allocation */
+ if(hcec == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+
+ hcec->gState = HAL_CEC_STATE_BUSY;
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+ if(hcec->MspDeInitCallback == NULL)
+ {
+ hcec->MspDeInitCallback = HAL_CEC_MspDeInit; /* Legacy weak MspDeInit */
+ }
+
+ /* DeInit the low level hardware */
+ hcec->MspDeInitCallback(hcec);
+
+#else
+ /* DeInit the low level hardware */
+ HAL_CEC_MspDeInit(hcec);
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+
+ __HAL_RCC_CEC_FORCE_RESET();
+ __HAL_RCC_CEC_RELEASE_RESET();
+
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+ hcec->gState = HAL_CEC_STATE_RESET;
+ hcec->RxState = HAL_CEC_STATE_RESET;
+
+ /* Process Unlock */
+ __HAL_UNLOCK(hcec);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the Own Address of the CEC device
+ * @param hcec: CEC handle
+ * @param CEC_OwnAddress: The CEC own address.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress)
+{
+ /* Check the parameters */
+ assert_param(IS_CEC_OWN_ADDRESS(CEC_OwnAddress));
+
+ if ((hcec->gState == HAL_CEC_STATE_READY) && (hcec->RxState == HAL_CEC_STATE_READY))
+ {
+ /* Process Locked */
+ __HAL_LOCK(hcec);
+
+ hcec->gState = HAL_CEC_STATE_BUSY;
+
+ /* Disable the Peripheral */
+ __HAL_CEC_DISABLE(hcec);
+
+ if(CEC_OwnAddress != CEC_OWN_ADDRESS_NONE)
+ {
+ MODIFY_REG(hcec->Instance->OAR, CEC_OAR_OA, hcec->Init.OwnAddress);
+ }
+ else
+ {
+ CLEAR_BIT(hcec->Instance->OAR, CEC_OAR_OA);
+ }
+
+ hcec->gState = HAL_CEC_STATE_READY;
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcec);
+
+ /* Enable the Peripheral */
+ __HAL_CEC_ENABLE(hcec);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief CEC MSP Init
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_MspInit can be implemented in the user file
+ */
+}
+
+/**
+ * @brief CEC MSP DeInit
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_MspDeInit can be implemented in the user file
+ */
+}
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Register a User CEC Callback
+ * To be used instead of the weak predefined callback
+ * @param hcec CEC handle
+ * @param CallbackID ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_CEC_TX_CPLT_CB_ID Tx Complete callback ID
+ * @arg @ref HAL_CEC_ERROR_CB_ID Error callback ID
+ * @arg @ref HAL_CEC_MSPINIT_CB_ID MspInit callback ID
+ * @arg @ref HAL_CEC_MSPDEINIT_CB_ID MspDeInit callback ID
+ * @param pCallback pointer to the Callback function
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, pCEC_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(pCallback == NULL)
+ {
+ /* Update the error code */
+ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
+ return HAL_ERROR;
+ }
+ /* Process locked */
+ __HAL_LOCK(hcec);
+
+ if(hcec->gState == HAL_CEC_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_CEC_TX_CPLT_CB_ID :
+ hcec->TxCpltCallback = pCallback;
+ break;
+
+ case HAL_CEC_ERROR_CB_ID :
+ hcec->ErrorCallback = pCallback;
+ break;
+
+ case HAL_CEC_MSPINIT_CB_ID :
+ hcec->MspInitCallback = pCallback;
+ break;
+
+ case HAL_CEC_MSPDEINIT_CB_ID :
+ hcec->MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Update the error code */
+ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if(hcec->gState == HAL_CEC_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_CEC_MSPINIT_CB_ID :
+ hcec->MspInitCallback = pCallback;
+ break;
+
+ case HAL_CEC_MSPDEINIT_CB_ID :
+ hcec->MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Update the error code */
+ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hcec);
+
+ return status;
+}
+
+/**
+ * @brief Unregister an CEC Callback
+ * CEC callabck is redirected to the weak predefined callback
+ * @param hcec uart handle
+ * @param CallbackID ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_CEC_TX_CPLT_CB_ID Tx Complete callback IDD
+ * @arg @ref HAL_CEC_ERROR_CB_ID Error callback ID
+ * @arg @ref HAL_CEC_MSPINIT_CB_ID MspInit callback ID
+ * @arg @ref HAL_CEC_MSPDEINIT_CB_ID MspDeInit callback ID
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hcec);
+
+ if(hcec->gState == HAL_CEC_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_CEC_TX_CPLT_CB_ID :
+ hcec->TxCpltCallback = HAL_CEC_TxCpltCallback; /* Legacy weak TxCpltCallback */
+ break;
+
+ case HAL_CEC_ERROR_CB_ID :
+ hcec->ErrorCallback = HAL_CEC_ErrorCallback; /* Legacy weak ErrorCallback */
+ break;
+
+ case HAL_CEC_MSPINIT_CB_ID :
+ hcec->MspInitCallback = HAL_CEC_MspInit;
+ break;
+
+ case HAL_CEC_MSPDEINIT_CB_ID :
+ hcec->MspDeInitCallback = HAL_CEC_MspDeInit;
+ break;
+
+ default :
+ /* Update the error code */
+ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if(hcec->gState == HAL_CEC_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_CEC_MSPINIT_CB_ID :
+ hcec->MspInitCallback = HAL_CEC_MspInit;
+ break;
+
+ case HAL_CEC_MSPDEINIT_CB_ID :
+ hcec->MspDeInitCallback = HAL_CEC_MspDeInit;
+ break;
+
+ default :
+ /* Update the error code */
+ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hcec);
+
+ return status;
+}
+
+/**
+ * @brief Register CEC RX complete Callback
+ * To be used instead of the weak HAL_CEC_RxCpltCallback() predefined callback
+ * @param hcec CEC handle
+ * @param pCallback pointer to the Rx transfer compelete Callback function
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(pCallback == NULL)
+ {
+ /* Update the error code */
+ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
+ return HAL_ERROR;
+ }
+ /* Process locked */
+ __HAL_LOCK(hcec);
+
+ if(HAL_CEC_STATE_READY == hcec->RxState)
+ {
+ hcec->RxCpltCallback = pCallback;
+ }
+ else
+ {
+ /* Update the error code */
+ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hcec);
+ return status;
+}
+
+/**
+ * @brief UnRegister CEC RX complete Callback
+ * CEC RX complete Callback is redirected to the weak HAL_CEC_RxCpltCallback() predefined callback
+ * @param hcec CEC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hcec);
+
+ if(HAL_CEC_STATE_READY == hcec->RxState)
+ {
+ hcec->RxCpltCallback = HAL_CEC_RxCpltCallback; /* Legacy weak CEC RxCpltCallback */
+ }
+ else
+ {
+ /* Update the error code */
+ hcec->ErrorCode |= HAL_CEC_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hcec);
+ return status;
+}
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions
+ * @brief CEC Transmit/Receive functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the CEC data transfers.
+
+ (#) The CEC handle must contain the initiator (TX side) and the destination (RX side)
+ logical addresses (4-bit long addresses, 0xF for broadcast messages destination)
+
+ (#) The communication is performed using Interrupts.
+ These API's return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated CEC IRQ when using Interrupt mode.
+ The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks
+ will be executed respectively at the end of the transmit or Receive process
+ The HAL_CEC_ErrorCallback() user callback will be executed when a communication
+ error is detected
+
+ (#) API's with Interrupt are :
+ (+) HAL_CEC_Transmit_IT()
+ (+) HAL_CEC_IRQHandler()
+
+ (#) A set of User Callbacks are provided:
+ (+) HAL_CEC_TxCpltCallback()
+ (+) HAL_CEC_RxCpltCallback()
+ (+) HAL_CEC_ErrorCallback()
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Send data in interrupt mode
+ * @param hcec: CEC handle
+ * @param InitiatorAddress: Initiator address
+ * @param DestinationAddress: destination logical address
+ * @param pData: pointer to input byte data buffer
+ * @param Size: amount of data to be sent in bytes (without counting the header).
+ * 0 means only the header is sent (ping operation).
+ * Maximum TX size is 15 bytes (1 opcode and up to 14 operands).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress,uint8_t DestinationAddress, uint8_t *pData, uint32_t Size)
+{
+ /* if the IP isn't already busy and if there is no previous transmission
+ already pending due to arbitration lost */
+ if(hcec->gState == HAL_CEC_STATE_READY)
+ {
+ if((pData == NULL ) && (Size > 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ assert_param(IS_CEC_ADDRESS(DestinationAddress));
+ assert_param(IS_CEC_ADDRESS(InitiatorAddress));
+ assert_param(IS_CEC_MSGSIZE(Size));
+
+ /* Process Locked */
+ __HAL_LOCK(hcec);
+ hcec->pTxBuffPtr = pData;
+ hcec->gState = HAL_CEC_STATE_BUSY_TX;
+ hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+
+ /* initialize the number of bytes to send,
+ * 0 means only one header is sent (ping operation) */
+ hcec->TxXferCount = Size;
+
+ /* send header block */
+ hcec->Instance->TXD = (uint8_t)((uint32_t)InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hcec);
+
+ /* case no data to be sent, sender is only pinging the system */
+ if (Size != 0)
+ {
+ /* Set TX Start of Message (TXSOM) bit */
+ MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_TRANSMIT_MASK, CEC_FLAG_TSOM);
+ }
+ else
+ {
+ /* Send a ping command */
+ MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_TRANSMIT_MASK, CEC_FLAG_TEOM|CEC_FLAG_TSOM);
+ }
+ return HAL_OK;
+
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Get size of the received frame.
+ * @param hcec: CEC handle
+ * @retval Frame size
+ */
+uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec)
+{
+ return hcec->RxXferSize;
+}
+
+/**
+ * @brief Change Rx Buffer.
+ * @param hcec: CEC handle
+ * @param Rxbuffer: Rx Buffer
+ * @note This function can be called only inside the HAL_CEC_RxCpltCallback()
+ * @retval Frame size
+ */
+void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t* Rxbuffer)
+{
+ hcec->Init.RxBuffer = Rxbuffer;
+}
+
+/**
+ * @brief This function handles CEC interrupt requests.
+ * @param hcec: CEC handle
+ * @retval None
+ */
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec)
+{
+ /* Save error status register for further error handling purposes */
+ hcec->ErrorCode = READ_BIT(hcec->Instance->ESR, CEC_ESR_ALL_ERROR);
+
+ /* Transmit error */
+ if(__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TERR) != RESET)
+ {
+ /* Acknowledgement of the error */
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TERR);
+
+ hcec->gState = HAL_CEC_STATE_READY;
+ }
+
+ /* Receive error */
+ if(__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RERR) != RESET)
+ {
+ /* Acknowledgement of the error */
+ __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RERR);
+ hcec->Init.RxBuffer-=hcec->RxXferSize;
+ hcec->RxXferSize = 0U;
+ hcec->RxState = HAL_CEC_STATE_READY;
+ }
+
+ if((hcec->ErrorCode & CEC_ESR_ALL_ERROR) != 0U)
+ {
+ /* Error Call Back */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+ hcec->ErrorCallback(hcec);
+#else
+ HAL_CEC_ErrorCallback(hcec);
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+ }
+
+ /* Transmit byte request or block transfer finished */
+ if(__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TBTRF) != RESET)
+ {
+ CEC_Transmit_IT(hcec);
+ }
+
+ /* Receive byte or block transfer finished */
+ if(__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RBTF) != RESET)
+ {
+ if(hcec->RxXferSize == 0U)
+ {
+ /* reception is starting */
+ hcec->RxState = HAL_CEC_STATE_BUSY_RX;
+ }
+ CEC_Receive_IT(hcec);
+ }
+}
+
+
+/**
+ * @brief Tx Transfer completed callback
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback
+ * @param hcec: CEC handle
+ * @param RxFrameSize: Size of frame
+ * @retval None
+ */
+__weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ UNUSED(RxFrameSize);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_RxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief CEC error callbacks
+ * @param hcec: CEC handle
+ * @retval None
+ */
+ __weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hcec);
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_CEC_ErrorCallback can be implemented in the user file
+ */
+}
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief CEC control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control function #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the CEC.
+ (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral.
+ (+) HAL_CEC_GetError() API can be helpful to check in run-time the error of the CEC peripheral.
+@endverbatim
+ * @{
+ */
+/**
+ * @brief return the CEC state
+ * @param hcec: pointer to a CEC_HandleTypeDef structure that contains
+ * the configuration information for the specified CEC module.
+ * @retval HAL state
+ */
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec)
+{
+ uint32_t temp1= 0x00U, temp2 = 0x00U;
+ temp1 = hcec->gState;
+ temp2 = hcec->RxState;
+
+ return (HAL_CEC_StateTypeDef)(temp1 | temp2);
+}
+
+/**
+* @brief Return the CEC error code
+* @param hcec : pointer to a CEC_HandleTypeDef structure that contains
+ * the configuration information for the specified CEC.
+* @retval CEC Error Code
+*/
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec)
+{
+ return hcec->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Private_Functions
+ * @{
+ */
+
+ /**
+ * @brief Send data in interrupt mode
+ * @param hcec: CEC handle.
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_CEC_Transmit_IT()
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec)
+{
+ /* if the IP is already busy or if there is a previous transmission
+ already pending due to arbitration loss */
+ if((hcec->gState == HAL_CEC_STATE_BUSY_TX) || (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) != RESET))
+ {
+ /* if all data have been sent */
+ if(hcec->TxXferCount == 0U)
+ {
+ /* Acknowledge successful completion by writing 0x00 */
+ MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_TRANSMIT_MASK, 0x00U);
+
+ hcec->gState = HAL_CEC_STATE_READY;
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+ hcec->TxCpltCallback(hcec);
+#else
+ HAL_CEC_TxCpltCallback(hcec);
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+
+ return HAL_OK;
+ }
+ else
+ {
+ /* Reduce the number of bytes to transfer by one */
+ hcec->TxXferCount--;
+
+ /* Write data to TX buffer*/
+ hcec->Instance->TXD = *hcec->pTxBuffPtr++;
+
+ /* If this is the last byte of the ongoing transmission */
+ if(hcec->TxXferCount == 0U)
+ {
+ /* Acknowledge byte request and signal end of message */
+ MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_TRANSMIT_MASK, CEC_FLAG_TEOM);
+ }
+ else
+ {
+ /* Acknowledge byte request by writing 0x00 */
+ MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_TRANSMIT_MASK, 0x00U);
+ }
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive data in interrupt mode.
+ * @param hcec: CEC handle.
+ * Function called under interruption only, once
+ * interruptions have been enabled by HAL_CEC_Receive_IT()
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec)
+{
+ static uint32_t temp;
+
+ if(hcec->RxState == HAL_CEC_STATE_BUSY_RX)
+ {
+ temp = hcec->Instance->CSR;
+
+ /* Store received data */
+ hcec->RxXferSize++;
+ *hcec->Init.RxBuffer++ = hcec->Instance->RXD;
+
+ /* Acknowledge received byte by writing 0x00 */
+ MODIFY_REG(hcec->Instance->CSR, CEC_FLAG_RECEIVE_MASK, 0x00U);
+
+ /* If the End Of Message is reached */
+ if(HAL_IS_BIT_SET(temp, CEC_FLAG_REOM))
+ {
+ /* Interrupts are not disabled due to transmission still ongoing */
+ hcec->RxState = HAL_CEC_STATE_READY;
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+ hcec->RxCpltCallback(hcec, hcec->RxXferSize);
+#else
+ HAL_CEC_RxCpltCallback(hcec, hcec->RxXferSize);
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* CEC */
+
+#endif /* HAL_CEC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1