From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_mmc.c | 2858 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 2,858 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_mmc.c b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_mmc.c
new file mode 100644
index 0000000..ee9dae2
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_mmc.c
@@ -0,0 +1,2858 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_mmc.c
+ * @author MCD Application Team
+ * @brief MMC card HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Secure Digital (MMC) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + MMC card Control functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver implements a high level communication layer for read and write from/to
+ this memory. The needed STM32 hardware resources (SDMMC and GPIO) are performed by
+ the user in HAL_MMC_MspInit() function (MSP layer).
+ Basically, the MSP layer configuration should be the same as we provide in the
+ examples.
+ You can easily tailor this configuration according to hardware resources.
+
+ [..]
+ This driver is a generic layered driver for SDMMC memories which uses the HAL
+ SDMMC driver functions to interface with MMC and eMMC cards devices.
+ It is used as follows:
+
+ (#)Initialize the SDMMC low level resources by implement the HAL_MMC_MspInit() API:
+ (##) Enable the SDMMC interface clock using __HAL_RCC_SDMMC_CLK_ENABLE();
+ (##) SDMMC pins configuration for MMC card
+ (+++) Enable the clock for the SDMMC GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these SDMMC pins as alternate function pull-up using HAL_GPIO_Init()
+ and according to your pin assignment;
+ (##) DMA Configuration if you need to use DMA process (HAL_MMC_ReadBlocks_DMA()
+ and HAL_MMC_WriteBlocks_DMA() APIs).
+ (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE();
+ (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled.
+ (##) NVIC configuration if you need to use interrupt process when using DMA transfer.
+ (+++) Configure the SDMMC and DMA interrupt priorities using function HAL_NVIC_SetPriority();
+ DMA priority is superior to SDMMC's priority
+ (+++) Enable the NVIC DMA and SDMMC IRQs using function HAL_NVIC_EnableIRQ()
+ (+++) SDMMC interrupts are managed using the macros __HAL_MMC_ENABLE_IT()
+ and __HAL_MMC_DISABLE_IT() inside the communication process.
+ (+++) SDMMC interrupts pending bits are managed using the macros __HAL_MMC_GET_IT()
+ and __HAL_MMC_CLEAR_IT()
+ (##) NVIC configuration if you need to use interrupt process (HAL_MMC_ReadBlocks_IT()
+ and HAL_MMC_WriteBlocks_IT() APIs).
+ (+++) Configure the SDMMC interrupt priorities using function HAL_NVIC_SetPriority();
+ (+++) Enable the NVIC SDMMC IRQs using function HAL_NVIC_EnableIRQ()
+ (+++) SDMMC interrupts are managed using the macros __HAL_MMC_ENABLE_IT()
+ and __HAL_MMC_DISABLE_IT() inside the communication process.
+ (+++) SDMMC interrupts pending bits are managed using the macros __HAL_MMC_GET_IT()
+ and __HAL_MMC_CLEAR_IT()
+ (#) At this stage, you can perform MMC read/write/erase operations after MMC card initialization
+
+
+ *** MMC Card Initialization and configuration ***
+ ================================================
+ [..]
+ To initialize the MMC Card, use the HAL_MMC_Init() function. It Initializes
+ SDMMC Peripheral (STM32 side) and the MMC Card, and put it into StandBy State (Ready for data transfer).
+ This function provide the following operations:
+
+ (#) Initialize the SDMMC peripheral interface with defaullt configuration.
+ The initialization process is done at 400KHz. You can change or adapt
+ this frequency by adjusting the "ClockDiv" field.
+ The MMC Card frequency (SDMMC_CK) is computed as follows:
+
+ SDMMC_CK = SDMMCCLK / (ClockDiv + 2)
+
+ In initialization mode and according to the MMC Card standard,
+ make sure that the SDMMC_CK frequency doesn't exceed 400KHz.
+
+ This phase of initialization is done through SDMMC_Init() and
+ SDMMC_PowerState_ON() SDMMC low level APIs.
+
+ (#) Initialize the MMC card. The API used is HAL_MMC_InitCard().
+ This phase allows the card initialization and identification
+ and check the MMC Card type (Standard Capacity or High Capacity)
+ The initialization flow is compatible with MMC standard.
+
+ This API (HAL_MMC_InitCard()) could be used also to reinitialize the card in case
+ of plug-off plug-in.
+
+ (#) Configure the MMC Card Data transfer frequency. By Default, the card transfer
+ frequency is set to 24MHz. You can change or adapt this frequency by adjusting
+ the "ClockDiv" field.
+ In transfer mode and according to the MMC Card standard, make sure that the
+ SDMMC_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch.
+ To be able to use a frequency higher than 24MHz, you should use the SDMMC
+ peripheral in bypass mode. Refer to the corresponding reference manual
+ for more details.
+
+ (#) Select the corresponding MMC Card according to the address read with the step 2.
+
+ (#) Configure the MMC Card in wide bus mode: 4-bits data.
+
+ *** MMC Card Read operation ***
+ ==============================
+ [..]
+ (+) You can read from MMC card in polling mode by using function HAL_MMC_ReadBlocks().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_MMC_GetCardState() function for MMC card state.
+
+ (+) You can read from MMC card in DMA mode by using function HAL_MMC_ReadBlocks_DMA().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_MMC_GetCardState() function for MMC card state.
+ You could also check the DMA transfer process through the MMC Rx interrupt event.
+
+ (+) You can read from MMC card in Interrupt mode by using function HAL_MMC_ReadBlocks_IT().
+ This function allows the read of 512 bytes blocks.
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_MMC_GetCardState() function for MMC card state.
+ You could also check the IT transfer process through the MMC Rx interrupt event.
+
+ *** MMC Card Write operation ***
+ ===============================
+ [..]
+ (+) You can write to MMC card in polling mode by using function HAL_MMC_WriteBlocks().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_MMC_GetCardState() function for MMC card state.
+
+ (+) You can write to MMC card in DMA mode by using function HAL_MMC_WriteBlocks_DMA().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 byte).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_MMC_GetCardState() function for MMC card state.
+ You could also check the DMA transfer process through the MMC Tx interrupt event.
+
+ (+) You can write to MMC card in Interrupt mode by using function HAL_MMC_WriteBlocks_IT().
+ This function allows the read of 512 bytes blocks.
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_MMC_GetCardState() function for MMC card state.
+ You could also check the IT transfer process through the MMC Tx interrupt event.
+
+ *** MMC card information ***
+ ===========================
+ [..]
+ (+) To get MMC card information, you can use the function HAL_MMC_GetCardInfo().
+ It returns useful information about the MMC card such as block size, card type,
+ block number ...
+
+ *** MMC card CSD register ***
+ ============================
+ [..]
+ (+) The HAL_MMC_GetCardCSD() API allows to get the parameters of the CSD register.
+ Some of the CSD parameters are useful for card initialization and identification.
+
+ *** MMC card CID register ***
+ ============================
+ [..]
+ (+) The HAL_MMC_GetCardCID() API allows to get the parameters of the CID register.
+ Some of the CID parameters are useful for card initialization and identification.
+
+ *** MMC HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in MMC HAL driver.
+
+ (+) __HAL_MMC_ENABLE : Enable the MMC device
+ (+) __HAL_MMC_DISABLE : Disable the MMC device
+ (+) __HAL_MMC_DMA_ENABLE: Enable the SDMMC DMA transfer
+ (+) __HAL_MMC_DMA_DISABLE: Disable the SDMMC DMA transfer
+ (+) __HAL_MMC_ENABLE_IT: Enable the MMC device interrupt
+ (+) __HAL_MMC_DISABLE_IT: Disable the MMC device interrupt
+ (+) __HAL_MMC_GET_FLAG:Check whether the specified MMC flag is set or not
+ (+) __HAL_MMC_CLEAR_FLAG: Clear the MMC's pending flags
+
+ [..]
+ (@) You can refer to the MMC HAL driver header file for more useful macros
+
+ *** Callback registration ***
+ =============================================
+ [..]
+ The compilation define USE_HAL_MMC_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+
+ Use Functions @ref HAL_MMC_RegisterCallback() to register a user callback,
+ it allows to register following callbacks:
+ (+) TxCpltCallback : callback when a transmission transfer is completed.
+ (+) RxCpltCallback : callback when a reception transfer is completed.
+ (+) ErrorCallback : callback when error occurs.
+ (+) AbortCpltCallback : callback when abort is completed.
+ (+) MspInitCallback : MMC MspInit.
+ (+) MspDeInitCallback : MMC MspDeInit.
+ This function takes as parameters the HAL peripheral handle, the Callback ID
+ and a pointer to the user callback function.
+
+ Use function @ref HAL_MMC_UnRegisterCallback() to reset a callback to the default
+ weak (surcharged) function. It allows to reset following callbacks:
+ (+) TxCpltCallback : callback when a transmission transfer is completed.
+ (+) RxCpltCallback : callback when a reception transfer is completed.
+ (+) ErrorCallback : callback when error occurs.
+ (+) AbortCpltCallback : callback when abort is completed.
+ (+) MspInitCallback : MMC MspInit.
+ (+) MspDeInitCallback : MMC MspDeInit.
+ This function) takes as parameters the HAL peripheral handle and the Callback ID.
+
+ By default, after the @ref HAL_MMC_Init and if the state is HAL_MMC_STATE_RESET
+ all callbacks are reset to the corresponding legacy weak (surcharged) functions.
+ Exception done for MspInit and MspDeInit callbacks that are respectively
+ reset to the legacy weak (surcharged) functions in the @ref HAL_MMC_Init
+ and @ref HAL_MMC_DeInit only when these callbacks are null (not registered beforehand).
+ If not, MspInit or MspDeInit are not null, the @ref HAL_MMC_Init and @ref HAL_MMC_DeInit
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
+
+ Callbacks can be registered/unregistered in READY state only.
+ Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered
+ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used
+ during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using @ref HAL_MMC_RegisterCallback before calling @ref HAL_MMC_DeInit
+ or @ref HAL_MMC_Init function.
+
+ When The compilation define USE_HAL_MMC_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registering feature is not available
+ and weak (surcharged) callbacks are used.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup MMC MMC
+ * @brief MMC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+
+#if defined(SDIO)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup MMC_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup MMC_Private_Functions MMC Private Functions
+ * @{
+ */
+static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc);
+static uint32_t MMC_PowerON(MMC_HandleTypeDef *hmmc);
+static uint32_t MMC_SendStatus(MMC_HandleTypeDef *hmmc, uint32_t *pCardStatus);
+static void MMC_PowerOFF(MMC_HandleTypeDef *hmmc);
+static void MMC_Write_IT(MMC_HandleTypeDef *hmmc);
+static void MMC_Read_IT(MMC_HandleTypeDef *hmmc);
+static void MMC_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void MMC_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void MMC_DMAError(DMA_HandleTypeDef *hdma);
+static void MMC_DMATxAbort(DMA_HandleTypeDef *hdma);
+static void MMC_DMARxAbort(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup MMC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup MMC_Exported_Functions_Group1
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize the MMC
+ card device to be ready for use.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the MMC according to the specified parameters in the
+ MMC_HandleTypeDef and create the associated handle.
+ * @param hmmc: Pointer to the MMC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc)
+{
+ /* Check the MMC handle allocation */
+ if(hmmc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_ALL_INSTANCE(hmmc->Instance));
+ assert_param(IS_SDIO_CLOCK_EDGE(hmmc->Init.ClockEdge));
+ assert_param(IS_SDIO_CLOCK_BYPASS(hmmc->Init.ClockBypass));
+ assert_param(IS_SDIO_CLOCK_POWER_SAVE(hmmc->Init.ClockPowerSave));
+ assert_param(IS_SDIO_BUS_WIDE(hmmc->Init.BusWide));
+ assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(hmmc->Init.HardwareFlowControl));
+ assert_param(IS_SDIO_CLKDIV(hmmc->Init.ClockDiv));
+
+ if(hmmc->State == HAL_MMC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hmmc->Lock = HAL_UNLOCKED;
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ /* Reset Callback pointers in HAL_MMC_STATE_RESET only */
+ hmmc->TxCpltCallback = HAL_MMC_TxCpltCallback;
+ hmmc->RxCpltCallback = HAL_MMC_RxCpltCallback;
+ hmmc->ErrorCallback = HAL_MMC_ErrorCallback;
+ hmmc->AbortCpltCallback = HAL_MMC_AbortCallback;
+
+ if(hmmc->MspInitCallback == NULL)
+ {
+ hmmc->MspInitCallback = HAL_MMC_MspInit;
+ }
+
+ /* Init the low level hardware */
+ hmmc->MspInitCallback(hmmc);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_MMC_MspInit(hmmc);
+#endif
+ }
+
+ hmmc->State = HAL_MMC_STATE_BUSY;
+
+ /* Initialize the Card parameters */
+ if(HAL_MMC_InitCard(hmmc) == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Initialize the error code */
+ hmmc->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ /* Initialize the MMC operation */
+ hmmc->Context = MMC_CONTEXT_NONE;
+
+ /* Initialize the MMC state */
+ hmmc->State = HAL_MMC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the MMC Card.
+ * @param hmmc: Pointer to MMC handle
+ * @note This function initializes the MMC card. It could be used when a card
+ re-initialization is needed.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc)
+{
+ uint32_t errorstate;
+ MMC_InitTypeDef Init;
+ HAL_StatusTypeDef status;
+
+ /* Default SDIO peripheral configuration for MMC card initialization */
+ Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
+ Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
+ Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
+ Init.BusWide = SDIO_BUS_WIDE_1B;
+ Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
+ Init.ClockDiv = SDIO_INIT_CLK_DIV;
+
+ /* Initialize SDIO peripheral interface with default configuration */
+ status = SDIO_Init(hmmc->Instance, Init);
+ if(status == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable SDIO Clock */
+ __HAL_MMC_DISABLE(hmmc);
+
+ /* Set Power State to ON */
+ status = SDIO_PowerState_ON(hmmc->Instance);
+ if(status == HAL_ERROR)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Enable MMC Clock */
+ __HAL_MMC_ENABLE(hmmc);
+
+ /* Identify card operating voltage */
+ errorstate = MMC_PowerON(hmmc);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->ErrorCode |= errorstate;
+ return HAL_ERROR;
+ }
+
+ /* Card initialization */
+ errorstate = MMC_InitCard(hmmc);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->ErrorCode |= errorstate;
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De-Initializes the MMC card.
+ * @param hmmc: Pointer to MMC handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_DeInit(MMC_HandleTypeDef *hmmc)
+{
+ /* Check the MMC handle allocation */
+ if(hmmc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_ALL_INSTANCE(hmmc->Instance));
+
+ hmmc->State = HAL_MMC_STATE_BUSY;
+
+ /* Set MMC power state to off */
+ MMC_PowerOFF(hmmc);
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ if(hmmc->MspDeInitCallback == NULL)
+ {
+ hmmc->MspDeInitCallback = HAL_MMC_MspDeInit;
+ }
+
+ /* DeInit the low level hardware */
+ hmmc->MspDeInitCallback(hmmc);
+#else
+ /* De-Initialize the MSP layer */
+ HAL_MMC_MspDeInit(hmmc);
+#endif
+
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+ hmmc->State = HAL_MMC_STATE_RESET;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the MMC MSP.
+ * @param hmmc: Pointer to MMC handle
+ * @retval None
+ */
+__weak void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hmmc);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_MMC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-Initialize MMC MSP.
+ * @param hmmc: Pointer to MMC handle
+ * @retval None
+ */
+__weak void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hmmc);
+
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_MMC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup MMC_Exported_Functions_Group2
+ * @brief Data transfer functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the data
+ transfer from/to MMC card.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed by polling mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_MMC_GetCardState().
+ * @param hmmc: Pointer to MMC handle
+ * @param pData: pointer to the buffer that will contain the received data
+ * @param BlockAdd: Block Address from where data is to be read
+ * @param NumberOfBlocks: Number of MMC blocks to read
+ * @param Timeout: Specify timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t count, data, dataremaining;
+ uint32_t add = BlockAdd;
+ uint8_t *tempbuff = pData;
+
+ if(NULL == pData)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hmmc->State == HAL_MMC_STATE_READY)
+ {
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+
+ if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hmmc->State = HAL_MMC_STATE_BUSY;
+
+ /* Initialize data control register */
+ hmmc->Instance->DCTRL = 0U;
+
+ if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Configure the MMC DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = NumberOfBlocks * MMC_BLOCKSIZE;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hmmc->Instance, &config);
+
+ /* Read block(s) in polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hmmc->Context = MMC_CONTEXT_READ_MULTIPLE_BLOCK;
+
+ /* Read Multi Block command */
+ errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add);
+ }
+ else
+ {
+ hmmc->Context = MMC_CONTEXT_READ_SINGLE_BLOCK;
+
+ /* Read Single Block command */
+ errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add);
+ }
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Poll on SDIO flags */
+ dataremaining = config.DataLength;
+ while(!__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+ {
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXFIFOHF) && (dataremaining > 0U))
+ {
+ /* Read data from SDIO Rx FIFO */
+ for(count = 0U; count < 8U; count++)
+ {
+ data = SDIO_ReadFIFO(hmmc->Instance);
+ *tempbuff = (uint8_t)(data & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 8U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 16U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 24U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ }
+ }
+
+ if(((HAL_GetTick()-tickstart) >= Timeout) || (Timeout == 0U))
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT;
+ hmmc->State= HAL_MMC_STATE_READY;
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send stop transmission command in case of multiblock read */
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U))
+ {
+ /* Send stop transmission command */
+ errorstate = SDMMC_CmdStopTransfer(hmmc->Instance);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ }
+
+ /* Get error state */
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DTIMEOUT))
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL))
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR))
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+
+ /* Empty FIFO if there is still any data */
+ while ((__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXDAVL)) && (dataremaining > 0U))
+ {
+ data = SDIO_ReadFIFO(hmmc->Instance);
+ *tempbuff = (uint8_t)(data & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 8U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 16U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 24U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+
+ if(((HAL_GetTick()-tickstart) >= Timeout) || (Timeout == 0U))
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT;
+ hmmc->State= HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ }
+
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
+
+ hmmc->State = HAL_MMC_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY;
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Allows to write block(s) to a specified address in a card. The Data
+ * transfer is managed by polling mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_MMC_GetCardState().
+ * @param hmmc: Pointer to MMC handle
+ * @param pData: pointer to the buffer that will contain the data to transmit
+ * @param BlockAdd: Block Address where data will be written
+ * @param NumberOfBlocks: Number of MMC blocks to write
+ * @param Timeout: Specify timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t count, data, dataremaining;
+ uint32_t add = BlockAdd;
+ uint8_t *tempbuff = pData;
+
+ if(NULL == pData)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hmmc->State == HAL_MMC_STATE_READY)
+ {
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+
+ if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hmmc->State = HAL_MMC_STATE_BUSY;
+
+ /* Initialize data control register */
+ hmmc->Instance->DCTRL = 0U;
+
+ if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Write Blocks in Polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hmmc->Context = MMC_CONTEXT_WRITE_MULTIPLE_BLOCK;
+
+ /* Write Multi Block command */
+ errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add);
+ }
+ else
+ {
+ hmmc->Context = MMC_CONTEXT_WRITE_SINGLE_BLOCK;
+
+ /* Write Single Block command */
+ errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add);
+ }
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Configure the MMC DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = NumberOfBlocks * MMC_BLOCKSIZE;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hmmc->Instance, &config);
+
+ /* Write block(s) in polling mode */
+ dataremaining = config.DataLength;
+ while(!__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+ {
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXFIFOHE) && (dataremaining > 0U))
+ {
+ /* Write data to SDIO Tx FIFO */
+ for(count = 0U; count < 8U; count++)
+ {
+ data = (uint32_t)(*tempbuff);
+ tempbuff++;
+ dataremaining--;
+ data |= ((uint32_t)(*tempbuff) << 8U);
+ tempbuff++;
+ dataremaining--;
+ data |= ((uint32_t)(*tempbuff) << 16U);
+ tempbuff++;
+ dataremaining--;
+ data |= ((uint32_t)(*tempbuff) << 24U);
+ tempbuff++;
+ dataremaining--;
+ (void)SDIO_WriteFIFO(hmmc->Instance, &data);
+ }
+ }
+
+ if(((HAL_GetTick()-tickstart) >= Timeout) || (Timeout == 0U))
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send stop transmission command in case of multiblock write */
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U))
+ {
+ /* Send stop transmission command */
+ errorstate = SDMMC_CmdStopTransfer(hmmc->Instance);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ }
+
+ /* Get error state */
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DTIMEOUT))
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL))
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXUNDERR))
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
+
+ hmmc->State = HAL_MMC_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_BUSY;
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed in interrupt mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_MMC_GetCardState().
+ * @note You could also check the IT transfer process through the MMC Rx
+ * interrupt event.
+ * @param hmmc: Pointer to MMC handle
+ * @param pData: Pointer to the buffer that will contain the received data
+ * @param BlockAdd: Block Address from where data is to be read
+ * @param NumberOfBlocks: Number of blocks to read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t add = BlockAdd;
+
+ if(NULL == pData)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hmmc->State == HAL_MMC_STATE_READY)
+ {
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+
+ if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hmmc->State = HAL_MMC_STATE_BUSY;
+
+ /* Initialize data control register */
+ hmmc->Instance->DCTRL = 0U;
+
+ hmmc->pRxBuffPtr = pData;
+ hmmc->RxXferSize = MMC_BLOCKSIZE * NumberOfBlocks;
+
+ __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_FLAG_RXFIFOHF | SDIO_IT_STBITERR));
+
+ if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Configure the MMC DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hmmc->Instance, &config);
+
+ /* Read Blocks in IT mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hmmc->Context = (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_IT);
+
+ /* Read Multi Block command */
+ errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add);
+ }
+ else
+ {
+ hmmc->Context = (MMC_CONTEXT_READ_SINGLE_BLOCK | MMC_CONTEXT_IT);
+
+ /* Read Single Block command */
+ errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add);
+ }
+
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Writes block(s) to a specified address in a card. The Data transfer
+ * is managed in interrupt mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_MMC_GetCardState().
+ * @note You could also check the IT transfer process through the MMC Tx
+ * interrupt event.
+ * @param hmmc: Pointer to MMC handle
+ * @param pData: Pointer to the buffer that will contain the data to transmit
+ * @param BlockAdd: Block Address where data will be written
+ * @param NumberOfBlocks: Number of blocks to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t add = BlockAdd;
+
+ if(NULL == pData)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hmmc->State == HAL_MMC_STATE_READY)
+ {
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+
+ if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hmmc->State = HAL_MMC_STATE_BUSY;
+
+ /* Initialize data control register */
+ hmmc->Instance->DCTRL = 0U;
+
+ hmmc->pTxBuffPtr = pData;
+ hmmc->TxXferSize = MMC_BLOCKSIZE * NumberOfBlocks;
+
+ /* Enable transfer interrupts */
+ __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND | SDIO_FLAG_TXFIFOHE | SDIO_IT_STBITERR));
+
+ if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Write Blocks in Polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hmmc->Context = (MMC_CONTEXT_WRITE_MULTIPLE_BLOCK| MMC_CONTEXT_IT);
+
+ /* Write Multi Block command */
+ errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add);
+ }
+ else
+ {
+ hmmc->Context = (MMC_CONTEXT_WRITE_SINGLE_BLOCK | MMC_CONTEXT_IT);
+
+ /* Write Single Block command */
+ errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add);
+ }
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Configure the MMC DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hmmc->Instance, &config);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed by DMA mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_MMC_GetCardState().
+ * @note You could also check the DMA transfer process through the MMC Rx
+ * interrupt event.
+ * @param hmmc: Pointer MMC handle
+ * @param pData: Pointer to the buffer that will contain the received data
+ * @param BlockAdd: Block Address from where data is to be read
+ * @param NumberOfBlocks: Number of blocks to read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t add = BlockAdd;
+
+ if(NULL == pData)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hmmc->State == HAL_MMC_STATE_READY)
+ {
+ hmmc->ErrorCode = HAL_DMA_ERROR_NONE;
+
+ if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hmmc->State = HAL_MMC_STATE_BUSY;
+
+ /* Initialize data control register */
+ hmmc->Instance->DCTRL = 0U;
+
+ __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_IT_STBITERR));
+
+ /* Set the DMA transfer complete callback */
+ hmmc->hdmarx->XferCpltCallback = MMC_DMAReceiveCplt;
+
+ /* Set the DMA error callback */
+ hmmc->hdmarx->XferErrorCallback = MMC_DMAError;
+
+ /* Set the DMA Abort callback */
+ hmmc->hdmarx->XferAbortCallback = NULL;
+
+ if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode = errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Enable the DMA Channel */
+ if(HAL_DMA_Start_IT(hmmc->hdmarx, (uint32_t)&hmmc->Instance->FIFO, (uint32_t)pData, (uint32_t)(MMC_BLOCKSIZE * NumberOfBlocks)/4) != HAL_OK)
+ {
+ __HAL_MMC_DISABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND));
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode = HAL_MMC_ERROR_DMA;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Enable MMC DMA transfer */
+ __HAL_MMC_DMA_ENABLE(hmmc);
+
+ /* Configure the MMC DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hmmc->Instance, &config);
+
+ /* Read Blocks in DMA mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hmmc->Context = (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_DMA);
+
+ /* Read Multi Block command */
+ errorstate = SDMMC_CmdReadMultiBlock(hmmc->Instance, add);
+ }
+ else
+ {
+ hmmc->Context = (MMC_CONTEXT_READ_SINGLE_BLOCK | MMC_CONTEXT_DMA);
+
+ /* Read Single Block command */
+ errorstate = SDMMC_CmdReadSingleBlock(hmmc->Instance, add);
+ }
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ __HAL_MMC_DISABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND));
+ hmmc->ErrorCode = errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Writes block(s) to a specified address in a card. The Data transfer
+ * is managed by DMA mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_MMC_GetCardState().
+ * @note You could also check the DMA transfer process through the MMC Tx
+ * interrupt event.
+ * @param hmmc: Pointer to MMC handle
+ * @param pData: Pointer to the buffer that will contain the data to transmit
+ * @param BlockAdd: Block Address where data will be written
+ * @param NumberOfBlocks: Number of blocks to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t add = BlockAdd;
+
+ if(NULL == pData)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hmmc->State == HAL_MMC_STATE_READY)
+ {
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+
+ if((BlockAdd + NumberOfBlocks) > (hmmc->MmcCard.LogBlockNbr))
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hmmc->State = HAL_MMC_STATE_BUSY;
+
+ /* Initialize data control register */
+ hmmc->Instance->DCTRL = 0U;
+
+ /* Enable MMC Error interrupts */
+ __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR));
+
+ /* Set the DMA transfer complete callback */
+ hmmc->hdmatx->XferCpltCallback = MMC_DMATransmitCplt;
+
+ /* Set the DMA error callback */
+ hmmc->hdmatx->XferErrorCallback = MMC_DMAError;
+
+ /* Set the DMA Abort callback */
+ hmmc->hdmatx->XferAbortCallback = NULL;
+
+ if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Write Blocks in Polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hmmc->Context = (MMC_CONTEXT_WRITE_MULTIPLE_BLOCK | MMC_CONTEXT_DMA);
+
+ /* Write Multi Block command */
+ errorstate = SDMMC_CmdWriteMultiBlock(hmmc->Instance, add);
+ }
+ else
+ {
+ hmmc->Context = (MMC_CONTEXT_WRITE_SINGLE_BLOCK | MMC_CONTEXT_DMA);
+
+ /* Write Single Block command */
+ errorstate = SDMMC_CmdWriteSingleBlock(hmmc->Instance, add);
+ }
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ __HAL_MMC_DISABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND));
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Enable SDIO DMA transfer */
+ __HAL_MMC_DMA_ENABLE(hmmc);
+
+ /* Enable the DMA Channel */
+ if(HAL_DMA_Start_IT(hmmc->hdmatx, (uint32_t)pData, (uint32_t)&hmmc->Instance->FIFO, (uint32_t)(MMC_BLOCKSIZE * NumberOfBlocks)/4) != HAL_OK)
+ {
+ __HAL_MMC_DISABLE_IT(hmmc, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND));
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DMA;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Configure the MMC DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hmmc->Instance, &config);
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Erases the specified memory area of the given MMC card.
+ * @note This API should be followed by a check on the card state through
+ * HAL_MMC_GetCardState().
+ * @param hmmc: Pointer to MMC handle
+ * @param BlockStartAdd: Start Block address
+ * @param BlockEndAdd: End Block address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd)
+{
+ uint32_t errorstate;
+ uint32_t start_add = BlockStartAdd;
+ uint32_t end_add = BlockEndAdd;
+
+ if(hmmc->State == HAL_MMC_STATE_READY)
+ {
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+
+ if(end_add < start_add)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(end_add > (hmmc->MmcCard.LogBlockNbr))
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hmmc->State = HAL_MMC_STATE_BUSY;
+
+ /* Check if the card command class supports erase command */
+ if(((hmmc->MmcCard.Class) & SDIO_CCCC_ERASE) == 0U)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ if((SDIO_GetResponse(hmmc->Instance, SDIO_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_LOCK_UNLOCK_FAILED;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ if ((hmmc->MmcCard.CardType) != MMC_HIGH_CAPACITY_CARD)
+ {
+ start_add *= 512U;
+ end_add *= 512U;
+ }
+
+ /* Send CMD35 MMC_ERASE_GRP_START with argument as addr */
+ errorstate = SDMMC_CmdEraseStartAdd(hmmc->Instance, start_add);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Send CMD36 MMC_ERASE_GRP_END with argument as addr */
+ errorstate = SDMMC_CmdEraseEndAdd(hmmc->Instance, end_add);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Send CMD38 ERASE */
+ errorstate = SDMMC_CmdErase(hmmc->Instance);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ hmmc->State = HAL_MMC_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles MMC card interrupt request.
+ * @param hmmc: Pointer to MMC handle
+ * @retval None
+ */
+void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc)
+{
+ uint32_t errorstate;
+ uint32_t context = hmmc->Context;
+
+ /* Check for SDIO interrupt flags */
+ if((__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXFIFOHF) != RESET) && ((context & MMC_CONTEXT_IT) != 0U))
+ {
+ MMC_Read_IT(hmmc);
+ }
+
+ else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DATAEND) != RESET)
+ {
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_FLAG_DATAEND);
+
+ __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
+ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR | SDIO_IT_STBITERR);
+
+ hmmc->Instance->DCTRL &= ~(SDIO_DCTRL_DTEN);
+
+ if((context & MMC_CONTEXT_DMA) != 0U)
+ {
+ if((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)
+ {
+ errorstate = SDMMC_CmdStopTransfer(hmmc->Instance);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->ErrorCallback(hmmc);
+#else
+ HAL_MMC_ErrorCallback(hmmc);
+#endif
+ }
+ }
+ if(((context & MMC_CONTEXT_READ_SINGLE_BLOCK) == 0U) && ((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) == 0U))
+ {
+ /* Disable the DMA transfer for transmit request by setting the DMAEN bit
+ in the MMC DCTRL register */
+ hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
+
+ hmmc->State = HAL_MMC_STATE_READY;
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->TxCpltCallback(hmmc);
+#else
+ HAL_MMC_TxCpltCallback(hmmc);
+#endif
+ }
+ }
+ else if((context & MMC_CONTEXT_IT) != 0U)
+ {
+ /* Stop Transfer for Write Multi blocks or Read Multi blocks */
+ if(((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U))
+ {
+ errorstate = SDMMC_CmdStopTransfer(hmmc->Instance);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->ErrorCallback(hmmc);
+#else
+ HAL_MMC_ErrorCallback(hmmc);
+#endif
+ }
+ }
+
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
+
+ hmmc->State = HAL_MMC_STATE_READY;
+ if(((context & MMC_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & MMC_CONTEXT_READ_MULTIPLE_BLOCK) != 0U))
+ {
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->RxCpltCallback(hmmc);
+#else
+ HAL_MMC_RxCpltCallback(hmmc);
+#endif
+ }
+ else
+ {
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->TxCpltCallback(hmmc);
+#else
+ HAL_MMC_TxCpltCallback(hmmc);
+#endif
+ }
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+
+ else if((__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXFIFOHE) != RESET) && ((context & MMC_CONTEXT_IT) != 0U))
+ {
+ MMC_Write_IT(hmmc);
+ }
+
+ else if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_RXOVERR | SDIO_FLAG_TXUNDERR | SDIO_FLAG_STBITERR) != RESET)
+ {
+ /* Set Error code */
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DCRCFAIL) != RESET)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_CRC_FAIL;
+ }
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_DTIMEOUT) != RESET)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT;
+ }
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR) != RESET)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_RX_OVERRUN;
+ }
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_TXUNDERR) != RESET)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_TX_UNDERRUN;
+ }
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_STBITERR) != RESET)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DATA_TIMEOUT;
+ }
+
+ /* Clear All flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS | SDIO_FLAG_STBITERR);
+
+ /* Disable all interrupts */
+ __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
+ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR | SDIO_IT_STBITERR);
+
+ hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
+
+ if((context & MMC_CONTEXT_IT) != 0U)
+ {
+ /* Set the MMC state to ready to be able to start again the process */
+ hmmc->State = HAL_MMC_STATE_READY;
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->ErrorCallback(hmmc);
+#else
+ HAL_MMC_ErrorCallback(hmmc);
+#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */
+ }
+ else if((context & MMC_CONTEXT_DMA) != 0U)
+ {
+ /* Abort the MMC DMA Streams */
+ if(hmmc->hdmatx != NULL)
+ {
+ /* Set the DMA Tx abort callback */
+ hmmc->hdmatx->XferAbortCallback = MMC_DMATxAbort;
+ /* Abort DMA in IT mode */
+ if(HAL_DMA_Abort_IT(hmmc->hdmatx) != HAL_OK)
+ {
+ MMC_DMATxAbort(hmmc->hdmatx);
+ }
+ }
+ else if(hmmc->hdmarx != NULL)
+ {
+ /* Set the DMA Rx abort callback */
+ hmmc->hdmarx->XferAbortCallback = MMC_DMARxAbort;
+ /* Abort DMA in IT mode */
+ if(HAL_DMA_Abort_IT(hmmc->hdmarx) != HAL_OK)
+ {
+ MMC_DMARxAbort(hmmc->hdmarx);
+ }
+ }
+ else
+ {
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+ hmmc->State = HAL_MMC_STATE_READY;
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->AbortCpltCallback(hmmc);
+#else
+ HAL_MMC_AbortCallback(hmmc);
+#endif
+ }
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+
+ else
+ {
+ /* Nothing to do */
+ }
+}
+
+/**
+ * @brief return the MMC state
+ * @param hmmc: Pointer to mmc handle
+ * @retval HAL state
+ */
+HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc)
+{
+ return hmmc->State;
+}
+
+/**
+* @brief Return the MMC error code
+* @param hmmc : Pointer to a MMC_HandleTypeDef structure that contains
+ * the configuration information.
+* @retval MMC Error Code
+*/
+uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc)
+{
+ return hmmc->ErrorCode;
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param hmmc: Pointer to MMC handle
+ * @retval None
+ */
+__weak void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hmmc);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_MMC_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param hmmc: Pointer MMC handle
+ * @retval None
+ */
+__weak void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hmmc);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_MMC_RxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief MMC error callbacks
+ * @param hmmc: Pointer MMC handle
+ * @retval None
+ */
+__weak void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hmmc);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_MMC_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief MMC Abort callbacks
+ * @param hmmc: Pointer MMC handle
+ * @retval None
+ */
+__weak void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hmmc);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_MMC_AbortCallback can be implemented in the user file
+ */
+}
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+/**
+ * @brief Register a User MMC Callback
+ * To be used instead of the weak (surcharged) predefined callback
+ * @param hmmc : MMC handle
+ * @param CallbackId : ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_MMC_TX_CPLT_CB_ID MMC Tx Complete Callback ID
+ * @arg @ref HAL_MMC_RX_CPLT_CB_ID MMC Rx Complete Callback ID
+ * @arg @ref HAL_MMC_ERROR_CB_ID MMC Error Callback ID
+ * @arg @ref HAL_MMC_ABORT_CB_ID MMC Abort Callback ID
+ * @arg @ref HAL_MMC_MSP_INIT_CB_ID MMC MspInit Callback ID
+ * @arg @ref HAL_MMC_MSP_DEINIT_CB_ID MMC MspDeInit Callback ID
+ * @param pCallback : pointer to the Callback function
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_MMC_RegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, pMMC_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(pCallback == NULL)
+ {
+ /* Update the error code */
+ hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hmmc);
+
+ if(hmmc->State == HAL_MMC_STATE_READY)
+ {
+ switch (CallbackId)
+ {
+ case HAL_MMC_TX_CPLT_CB_ID :
+ hmmc->TxCpltCallback = pCallback;
+ break;
+ case HAL_MMC_RX_CPLT_CB_ID :
+ hmmc->RxCpltCallback = pCallback;
+ break;
+ case HAL_MMC_ERROR_CB_ID :
+ hmmc->ErrorCallback = pCallback;
+ break;
+ case HAL_MMC_ABORT_CB_ID :
+ hmmc->AbortCpltCallback = pCallback;
+ break;
+ case HAL_MMC_MSP_INIT_CB_ID :
+ hmmc->MspInitCallback = pCallback;
+ break;
+ case HAL_MMC_MSP_DEINIT_CB_ID :
+ hmmc->MspDeInitCallback = pCallback;
+ break;
+ default :
+ /* Update the error code */
+ hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (hmmc->State == HAL_MMC_STATE_RESET)
+ {
+ switch (CallbackId)
+ {
+ case HAL_MMC_MSP_INIT_CB_ID :
+ hmmc->MspInitCallback = pCallback;
+ break;
+ case HAL_MMC_MSP_DEINIT_CB_ID :
+ hmmc->MspDeInitCallback = pCallback;
+ break;
+ default :
+ /* Update the error code */
+ hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hmmc);
+ return status;
+}
+
+/**
+ * @brief Unregister a User MMC Callback
+ * MMC Callback is redirected to the weak (surcharged) predefined callback
+ * @param hmmc : MMC handle
+ * @param CallbackId : ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_MMC_TX_CPLT_CB_ID MMC Tx Complete Callback ID
+ * @arg @ref HAL_MMC_RX_CPLT_CB_ID MMC Rx Complete Callback ID
+ * @arg @ref HAL_MMC_ERROR_CB_ID MMC Error Callback ID
+ * @arg @ref HAL_MMC_ABORT_CB_ID MMC Abort Callback ID
+ * @arg @ref HAL_MMC_MSP_INIT_CB_ID MMC MspInit Callback ID
+ * @arg @ref HAL_MMC_MSP_DEINIT_CB_ID MMC MspDeInit Callback ID
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hmmc);
+
+ if(hmmc->State == HAL_MMC_STATE_READY)
+ {
+ switch (CallbackId)
+ {
+ case HAL_MMC_TX_CPLT_CB_ID :
+ hmmc->TxCpltCallback = HAL_MMC_TxCpltCallback;
+ break;
+ case HAL_MMC_RX_CPLT_CB_ID :
+ hmmc->RxCpltCallback = HAL_MMC_RxCpltCallback;
+ break;
+ case HAL_MMC_ERROR_CB_ID :
+ hmmc->ErrorCallback = HAL_MMC_ErrorCallback;
+ break;
+ case HAL_MMC_ABORT_CB_ID :
+ hmmc->AbortCpltCallback = HAL_MMC_AbortCallback;
+ break;
+ case HAL_MMC_MSP_INIT_CB_ID :
+ hmmc->MspInitCallback = HAL_MMC_MspInit;
+ break;
+ case HAL_MMC_MSP_DEINIT_CB_ID :
+ hmmc->MspDeInitCallback = HAL_MMC_MspDeInit;
+ break;
+ default :
+ /* Update the error code */
+ hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (hmmc->State == HAL_MMC_STATE_RESET)
+ {
+ switch (CallbackId)
+ {
+ case HAL_MMC_MSP_INIT_CB_ID :
+ hmmc->MspInitCallback = HAL_MMC_MspInit;
+ break;
+ case HAL_MMC_MSP_DEINIT_CB_ID :
+ hmmc->MspDeInitCallback = HAL_MMC_MspDeInit;
+ break;
+ default :
+ /* Update the error code */
+ hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hmmc->ErrorCode |= HAL_MMC_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hmmc);
+ return status;
+}
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup MMC_Exported_Functions_Group3
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the MMC card
+ operations and get the related information
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns information the information of the card which are stored on
+ * the CID register.
+ * @param hmmc: Pointer to MMC handle
+ * @param pCID: Pointer to a HAL_MMC_CIDTypedef structure that
+ * contains all CID register parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID)
+{
+ pCID->ManufacturerID = (uint8_t)((hmmc->CID[0] & 0xFF000000U) >> 24U);
+
+ pCID->OEM_AppliID = (uint16_t)((hmmc->CID[0] & 0x00FFFF00U) >> 8U);
+
+ pCID->ProdName1 = (((hmmc->CID[0] & 0x000000FFU) << 24U) | ((hmmc->CID[1] & 0xFFFFFF00U) >> 8U));
+
+ pCID->ProdName2 = (uint8_t)(hmmc->CID[1] & 0x000000FFU);
+
+ pCID->ProdRev = (uint8_t)((hmmc->CID[2] & 0xFF000000U) >> 24U);
+
+ pCID->ProdSN = (((hmmc->CID[2] & 0x00FFFFFFU) << 8U) | ((hmmc->CID[3] & 0xFF000000U) >> 24U));
+
+ pCID->Reserved1 = (uint8_t)((hmmc->CID[3] & 0x00F00000U) >> 20U);
+
+ pCID->ManufactDate = (uint16_t)((hmmc->CID[3] & 0x000FFF00U) >> 8U);
+
+ pCID->CID_CRC = (uint8_t)((hmmc->CID[3] & 0x000000FEU) >> 1U);
+
+ pCID->Reserved2 = 1U;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns information the information of the card which are stored on
+ * the CSD register.
+ * @param hmmc: Pointer to MMC handle
+ * @param pCSD: Pointer to a HAL_MMC_CardCSDTypeDef structure that
+ * contains all CSD register parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD)
+{
+ pCSD->CSDStruct = (uint8_t)((hmmc->CSD[0] & 0xC0000000U) >> 30U);
+
+ pCSD->SysSpecVersion = (uint8_t)((hmmc->CSD[0] & 0x3C000000U) >> 26U);
+
+ pCSD->Reserved1 = (uint8_t)((hmmc->CSD[0] & 0x03000000U) >> 24U);
+
+ pCSD->TAAC = (uint8_t)((hmmc->CSD[0] & 0x00FF0000U) >> 16U);
+
+ pCSD->NSAC = (uint8_t)((hmmc->CSD[0] & 0x0000FF00U) >> 8U);
+
+ pCSD->MaxBusClkFrec = (uint8_t)(hmmc->CSD[0] & 0x000000FFU);
+
+ pCSD->CardComdClasses = (uint16_t)((hmmc->CSD[1] & 0xFFF00000U) >> 20U);
+
+ pCSD->RdBlockLen = (uint8_t)((hmmc->CSD[1] & 0x000F0000U) >> 16U);
+
+ pCSD->PartBlockRead = (uint8_t)((hmmc->CSD[1] & 0x00008000U) >> 15U);
+
+ pCSD->WrBlockMisalign = (uint8_t)((hmmc->CSD[1] & 0x00004000U) >> 14U);
+
+ pCSD->RdBlockMisalign = (uint8_t)((hmmc->CSD[1] & 0x00002000U) >> 13U);
+
+ pCSD->DSRImpl = (uint8_t)((hmmc->CSD[1] & 0x00001000U) >> 12U);
+
+ pCSD->Reserved2 = 0U; /*!< Reserved */
+
+ pCSD->DeviceSize = (((hmmc->CSD[1] & 0x000003FFU) << 2U) | ((hmmc->CSD[2] & 0xC0000000U) >> 30U));
+
+ pCSD->MaxRdCurrentVDDMin = (uint8_t)((hmmc->CSD[2] & 0x38000000U) >> 27U);
+
+ pCSD->MaxRdCurrentVDDMax = (uint8_t)((hmmc->CSD[2] & 0x07000000U) >> 24U);
+
+ pCSD->MaxWrCurrentVDDMin = (uint8_t)((hmmc->CSD[2] & 0x00E00000U) >> 21U);
+
+ pCSD->MaxWrCurrentVDDMax = (uint8_t)((hmmc->CSD[2] & 0x001C0000U) >> 18U);
+
+ pCSD->DeviceSizeMul = (uint8_t)((hmmc->CSD[2] & 0x00038000U) >> 15U);
+
+ hmmc->MmcCard.BlockNbr = (pCSD->DeviceSize + 1U) ;
+ hmmc->MmcCard.BlockNbr *= (1UL << ((pCSD->DeviceSizeMul & 0x07U) + 2U));
+ hmmc->MmcCard.BlockSize = (1UL << (pCSD->RdBlockLen & 0x0FU));
+
+ hmmc->MmcCard.LogBlockNbr = (hmmc->MmcCard.BlockNbr) * ((hmmc->MmcCard.BlockSize) / 512U);
+ hmmc->MmcCard.LogBlockSize = 512U;
+
+ pCSD->EraseGrSize = (uint8_t)((hmmc->CSD[2] & 0x00004000U) >> 14U);
+
+ pCSD->EraseGrMul = (uint8_t)((hmmc->CSD[2] & 0x00003F80U) >> 7U);
+
+ pCSD->WrProtectGrSize = (uint8_t)(hmmc->CSD[2] & 0x0000007FU);
+
+ pCSD->WrProtectGrEnable = (uint8_t)((hmmc->CSD[3] & 0x80000000U) >> 31U);
+
+ pCSD->ManDeflECC = (uint8_t)((hmmc->CSD[3] & 0x60000000U) >> 29U);
+
+ pCSD->WrSpeedFact = (uint8_t)((hmmc->CSD[3] & 0x1C000000U) >> 26U);
+
+ pCSD->MaxWrBlockLen= (uint8_t)((hmmc->CSD[3] & 0x03C00000U) >> 22U);
+
+ pCSD->WriteBlockPaPartial = (uint8_t)((hmmc->CSD[3] & 0x00200000U) >> 21U);
+
+ pCSD->Reserved3 = 0;
+
+ pCSD->ContentProtectAppli = (uint8_t)((hmmc->CSD[3] & 0x00010000U) >> 16U);
+
+ pCSD->FileFormatGroup = (uint8_t)((hmmc->CSD[3] & 0x00008000U) >> 15U);
+
+ pCSD->CopyFlag = (uint8_t)((hmmc->CSD[3] & 0x00004000U) >> 14U);
+
+ pCSD->PermWrProtect = (uint8_t)((hmmc->CSD[3] & 0x00002000U) >> 13U);
+
+ pCSD->TempWrProtect = (uint8_t)((hmmc->CSD[3] & 0x00001000U) >> 12U);
+
+ pCSD->FileFormat = (uint8_t)((hmmc->CSD[3] & 0x00000C00U) >> 10U);
+
+ pCSD->ECC= (uint8_t)((hmmc->CSD[3] & 0x00000300U) >> 8U);
+
+ pCSD->CSD_CRC = (uint8_t)((hmmc->CSD[3] & 0x000000FEU) >> 1U);
+
+ pCSD->Reserved4 = 1;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the MMC card info.
+ * @param hmmc: Pointer to MMC handle
+ * @param pCardInfo: Pointer to the HAL_MMC_CardInfoTypeDef structure that
+ * will contain the MMC card status information
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo)
+{
+ pCardInfo->CardType = (uint32_t)(hmmc->MmcCard.CardType);
+ pCardInfo->Class = (uint32_t)(hmmc->MmcCard.Class);
+ pCardInfo->RelCardAdd = (uint32_t)(hmmc->MmcCard.RelCardAdd);
+ pCardInfo->BlockNbr = (uint32_t)(hmmc->MmcCard.BlockNbr);
+ pCardInfo->BlockSize = (uint32_t)(hmmc->MmcCard.BlockSize);
+ pCardInfo->LogBlockNbr = (uint32_t)(hmmc->MmcCard.LogBlockNbr);
+ pCardInfo->LogBlockSize = (uint32_t)(hmmc->MmcCard.LogBlockSize);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables wide bus operation for the requested card if supported by
+ * card.
+ * @param hmmc: Pointer to MMC handle
+ * @param WideMode: Specifies the MMC card wide bus mode
+ * This parameter can be one of the following values:
+ * @arg SDIO_BUS_WIDE_8B: 8-bit data transfer
+ * @arg SDIO_BUS_WIDE_4B: 4-bit data transfer
+ * @arg SDIO_BUS_WIDE_1B: 1-bit data transfer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode)
+{
+ __IO uint32_t count = 0U;
+ SDIO_InitTypeDef Init;
+ uint32_t errorstate;
+ uint32_t response = 0U, busy = 0U;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_BUS_WIDE(WideMode));
+
+ /* Chnage Satte */
+ hmmc->State = HAL_MMC_STATE_BUSY;
+
+ /* Update Clock for Bus mode update */
+ Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
+ Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
+ Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
+ Init.BusWide = WideMode;
+ Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
+ Init.ClockDiv = SDIO_INIT_CLK_DIV;
+ /* Initialize SDIO*/
+ (void)SDIO_Init(hmmc->Instance, Init);
+
+ if(WideMode == SDIO_BUS_WIDE_8B)
+ {
+ errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70200U);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+ }
+ }
+ else if(WideMode == SDIO_BUS_WIDE_4B)
+ {
+ errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70100U);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+ }
+ }
+ else if(WideMode == SDIO_BUS_WIDE_1B)
+ {
+ errorstate = SDMMC_CmdSwitch(hmmc->Instance, 0x03B70000U);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+ }
+ }
+ else
+ {
+ /* WideMode is not a valid argument*/
+ hmmc->ErrorCode |= HAL_MMC_ERROR_PARAM;
+ }
+
+ /* Check for switch error and violation of the trial number of sending CMD 13 */
+ while(busy == 0U)
+ {
+ if(count == SDMMC_MAX_TRIAL)
+ {
+ hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE;
+ return HAL_ERROR;
+ }
+ count++;
+
+ /* While card is not ready for data and trial number for sending CMD13 is not exceeded */
+ errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U));
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+ }
+
+ /* Get command response */
+ response = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
+
+ /* Get operating voltage*/
+ busy = (((response >> 7U) == 1U) ? 0U : 1U);
+ }
+
+ /* While card is not ready for data and trial number for sending CMD13 is not exceeded */
+ count = SDMMC_DATATIMEOUT;
+ while((response & 0x00000100U) == 0U)
+ {
+ if(count == 0U)
+ {
+ hmmc->State = HAL_MMC_STATE_READY;
+ hmmc->ErrorCode |= HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE;
+ return HAL_ERROR;
+ }
+ count--;
+
+ /* While card is not ready for data and trial number for sending CMD13 is not exceeded */
+ errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U));
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+ }
+
+ /* Get command response */
+ response = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
+ }
+
+ if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Configure the SDIO peripheral */
+ Init.ClockEdge = hmmc->Init.ClockEdge;
+ Init.ClockBypass = hmmc->Init.ClockBypass;
+ Init.ClockPowerSave = hmmc->Init.ClockPowerSave;
+ Init.BusWide = WideMode;
+ Init.HardwareFlowControl = hmmc->Init.HardwareFlowControl;
+ Init.ClockDiv = hmmc->Init.ClockDiv;
+ (void)SDIO_Init(hmmc->Instance, Init);
+ }
+
+ /* Change State */
+ hmmc->State = HAL_MMC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the current mmc card data state.
+ * @param hmmc: pointer to MMC handle
+ * @retval Card state
+ */
+HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc)
+{
+ uint32_t cardstate;
+ uint32_t errorstate;
+ uint32_t resp1 = 0U;
+
+ errorstate = MMC_SendStatus(hmmc, &resp1);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+ }
+
+ cardstate = ((resp1 >> 9U) & 0x0FU);
+
+ return (HAL_MMC_CardStateTypeDef)cardstate;
+}
+
+/**
+ * @brief Abort the current transfer and disable the MMC.
+ * @param hmmc: pointer to a MMC_HandleTypeDef structure that contains
+ * the configuration information for MMC module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc)
+{
+ HAL_MMC_CardStateTypeDef CardState;
+
+ /* DIsable All interrupts */
+ __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
+ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR);
+
+ /* Clear All flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
+
+ if((hmmc->hdmatx != NULL) || (hmmc->hdmarx != NULL))
+ {
+ /* Disable the MMC DMA request */
+ hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
+
+ /* Abort the MMC DMA Tx Stream */
+ if(hmmc->hdmatx != NULL)
+ {
+ if(HAL_DMA_Abort(hmmc->hdmatx) != HAL_OK)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DMA;
+ }
+ }
+ /* Abort the MMC DMA Rx Stream */
+ if(hmmc->hdmarx != NULL)
+ {
+ if(HAL_DMA_Abort(hmmc->hdmarx) != HAL_OK)
+ {
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DMA;
+ }
+ }
+ }
+
+ hmmc->State = HAL_MMC_STATE_READY;
+
+ /* Initialize the MMC operation */
+ hmmc->Context = MMC_CONTEXT_NONE;
+
+ CardState = HAL_MMC_GetCardState(hmmc);
+ if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
+ {
+ hmmc->ErrorCode = SDMMC_CmdStopTransfer(hmmc->Instance);
+ }
+ if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
+ {
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Abort the current transfer and disable the MMC (IT mode).
+ * @param hmmc: pointer to a MMC_HandleTypeDef structure that contains
+ * the configuration information for MMC module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc)
+{
+ HAL_MMC_CardStateTypeDef CardState;
+
+ /* DIsable All interrupts */
+ __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
+ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR);
+
+ /* Clear All flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
+
+ if((hmmc->hdmatx != NULL) || (hmmc->hdmarx != NULL))
+ {
+ /* Disable the MMC DMA request */
+ hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
+
+ /* Abort the MMC DMA Tx Stream */
+ if(hmmc->hdmatx != NULL)
+ {
+ hmmc->hdmatx->XferAbortCallback = MMC_DMATxAbort;
+ if(HAL_DMA_Abort_IT(hmmc->hdmatx) != HAL_OK)
+ {
+ hmmc->hdmatx = NULL;
+ }
+ }
+ /* Abort the MMC DMA Rx Stream */
+ if(hmmc->hdmarx != NULL)
+ {
+ hmmc->hdmarx->XferAbortCallback = MMC_DMARxAbort;
+ if(HAL_DMA_Abort_IT(hmmc->hdmarx) != HAL_OK)
+ {
+ hmmc->hdmarx = NULL;
+ }
+ }
+ }
+
+ /* No transfer ongoing on both DMA channels*/
+ if((hmmc->hdmatx == NULL) && (hmmc->hdmarx == NULL))
+ {
+ CardState = HAL_MMC_GetCardState(hmmc);
+ hmmc->State = HAL_MMC_STATE_READY;
+
+ if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
+ {
+ hmmc->ErrorCode = SDMMC_CmdStopTransfer(hmmc->Instance);
+ }
+ if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->AbortCpltCallback(hmmc);
+#else
+ HAL_MMC_AbortCallback(hmmc);
+#endif
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private function ----------------------------------------------------------*/
+/** @addtogroup MMC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief DMA MMC transmit process complete callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void MMC_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
+
+ /* Enable DATAEND Interrupt */
+ __HAL_MMC_ENABLE_IT(hmmc, (SDIO_IT_DATAEND));
+}
+
+/**
+ * @brief DMA MMC receive process complete callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void MMC_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
+ uint32_t errorstate;
+
+ /* Send stop command in multiblock write */
+ if(hmmc->Context == (MMC_CONTEXT_READ_MULTIPLE_BLOCK | MMC_CONTEXT_DMA))
+ {
+ errorstate = SDMMC_CmdStopTransfer(hmmc->Instance);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->ErrorCallback(hmmc);
+#else
+ HAL_MMC_ErrorCallback(hmmc);
+#endif
+ }
+ }
+
+ /* Disable the DMA transfer for transmit request by setting the DMAEN bit
+ in the MMC DCTRL register */
+ hmmc->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
+
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
+
+ hmmc->State = HAL_MMC_STATE_READY;
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->RxCpltCallback(hmmc);
+#else
+ HAL_MMC_RxCpltCallback(hmmc);
+#endif
+}
+
+/**
+ * @brief DMA MMC communication error callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void MMC_DMAError(DMA_HandleTypeDef *hdma)
+{
+ MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
+ HAL_MMC_CardStateTypeDef CardState;
+ uint32_t RxErrorCode, TxErrorCode;
+
+ RxErrorCode = hmmc->hdmarx->ErrorCode;
+ TxErrorCode = hmmc->hdmatx->ErrorCode;
+ if((RxErrorCode == HAL_DMA_ERROR_TE) || (TxErrorCode == HAL_DMA_ERROR_TE))
+ {
+ /* Clear All flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+
+ /* Disable All interrupts */
+ __HAL_MMC_DISABLE_IT(hmmc, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
+ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR);
+
+ hmmc->ErrorCode |= HAL_MMC_ERROR_DMA;
+ CardState = HAL_MMC_GetCardState(hmmc);
+ if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
+ {
+ hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
+ }
+
+ hmmc->State= HAL_MMC_STATE_READY;
+ }
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->ErrorCallback(hmmc);
+#else
+ HAL_MMC_ErrorCallback(hmmc);
+#endif
+}
+
+/**
+ * @brief DMA MMC Tx Abort callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void MMC_DMATxAbort(DMA_HandleTypeDef *hdma)
+{
+ MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
+ HAL_MMC_CardStateTypeDef CardState;
+
+ if(hmmc->hdmatx != NULL)
+ {
+ hmmc->hdmatx = NULL;
+ }
+
+ /* All DMA channels are aborted */
+ if(hmmc->hdmarx == NULL)
+ {
+ CardState = HAL_MMC_GetCardState(hmmc);
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+ hmmc->State = HAL_MMC_STATE_READY;
+ if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
+ {
+ hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
+
+ if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
+ {
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->AbortCpltCallback(hmmc);
+#else
+ HAL_MMC_AbortCallback(hmmc);
+#endif
+ }
+ else
+ {
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->ErrorCallback(hmmc);
+#else
+ HAL_MMC_ErrorCallback(hmmc);
+#endif
+ }
+ }
+ }
+}
+
+/**
+ * @brief DMA MMC Rx Abort callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void MMC_DMARxAbort(DMA_HandleTypeDef *hdma)
+{
+ MMC_HandleTypeDef* hmmc = (MMC_HandleTypeDef* )(hdma->Parent);
+ HAL_MMC_CardStateTypeDef CardState;
+
+ if(hmmc->hdmarx != NULL)
+ {
+ hmmc->hdmarx = NULL;
+ }
+
+ /* All DMA channels are aborted */
+ if(hmmc->hdmatx == NULL)
+ {
+ CardState = HAL_MMC_GetCardState(hmmc);
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+ hmmc->State = HAL_MMC_STATE_READY;
+ if((CardState == HAL_MMC_CARD_RECEIVING) || (CardState == HAL_MMC_CARD_SENDING))
+ {
+ hmmc->ErrorCode |= SDMMC_CmdStopTransfer(hmmc->Instance);
+
+ if(hmmc->ErrorCode != HAL_MMC_ERROR_NONE)
+ {
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->AbortCpltCallback(hmmc);
+#else
+ HAL_MMC_AbortCallback(hmmc);
+#endif
+ }
+ else
+ {
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ hmmc->ErrorCallback(hmmc);
+#else
+ HAL_MMC_ErrorCallback(hmmc);
+#endif
+ }
+ }
+ }
+}
+
+/**
+ * @brief Initializes the mmc card.
+ * @param hmmc: Pointer to MMC handle
+ * @retval MMC Card error state
+ */
+static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc)
+{
+ HAL_MMC_CardCSDTypeDef CSD;
+ uint32_t errorstate;
+ uint16_t mmc_rca = 1U;
+
+ /* Check the power State */
+ if(SDIO_GetPowerState(hmmc->Instance) == 0U)
+ {
+ /* Power off */
+ return HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE;
+ }
+
+ /* Send CMD2 ALL_SEND_CID */
+ errorstate = SDMMC_CmdSendCID(hmmc->Instance);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ return errorstate;
+ }
+ else
+ {
+ /* Get Card identification number data */
+ hmmc->CID[0U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
+ hmmc->CID[1U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP2);
+ hmmc->CID[2U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP3);
+ hmmc->CID[3U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP4);
+ }
+
+ /* Send CMD3 SET_REL_ADDR with argument 0 */
+ /* MMC Card publishes its RCA. */
+ errorstate = SDMMC_CmdSetRelAdd(hmmc->Instance, &mmc_rca);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* Get the MMC card RCA */
+ hmmc->MmcCard.RelCardAdd = mmc_rca;
+
+ /* Send CMD9 SEND_CSD with argument as card's RCA */
+ errorstate = SDMMC_CmdSendCSD(hmmc->Instance, (uint32_t)(hmmc->MmcCard.RelCardAdd << 16U));
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ return errorstate;
+ }
+ else
+ {
+ /* Get Card Specific Data */
+ hmmc->CSD[0U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
+ hmmc->CSD[1U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP2);
+ hmmc->CSD[2U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP3);
+ hmmc->CSD[3U] = SDIO_GetResponse(hmmc->Instance, SDIO_RESP4);
+ }
+
+ /* Get the Card Class */
+ hmmc->MmcCard.Class = (SDIO_GetResponse(hmmc->Instance, SDIO_RESP2) >> 20U);
+
+ /* Get CSD parameters */
+ if (HAL_MMC_GetCardCSD(hmmc, &CSD) != HAL_OK)
+ {
+ return hmmc->ErrorCode;
+ }
+
+ /* Select the Card */
+ errorstate = SDMMC_CmdSelDesel(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16U));
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* Configure SDIO peripheral interface */
+ (void)SDIO_Init(hmmc->Instance, hmmc->Init);
+
+ /* All cards are initialized */
+ return HAL_MMC_ERROR_NONE;
+}
+
+/**
+ * @brief Enquires cards about their operating voltage and configures clock
+ * controls and stores MMC information that will be needed in future
+ * in the MMC handle.
+ * @param hmmc: Pointer to MMC handle
+ * @retval error state
+ */
+static uint32_t MMC_PowerON(MMC_HandleTypeDef *hmmc)
+{
+ __IO uint32_t count = 0U;
+ uint32_t response = 0U, validvoltage = 0U;
+ uint32_t errorstate;
+
+ /* CMD0: GO_IDLE_STATE */
+ errorstate = SDMMC_CmdGoIdleState(hmmc->Instance);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ while(validvoltage == 0U)
+ {
+ if(count++ == SDMMC_MAX_VOLT_TRIAL)
+ {
+ return HAL_MMC_ERROR_INVALID_VOLTRANGE;
+ }
+
+ /* SEND CMD1 APP_CMD with MMC_HIGH_VOLTAGE_RANGE(0xC0FF8000) as argument */
+ errorstate = SDMMC_CmdOpCondition(hmmc->Instance, eMMC_HIGH_VOLTAGE_RANGE);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ return HAL_MMC_ERROR_UNSUPPORTED_FEATURE;
+ }
+
+ /* Get command response */
+ response = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
+
+ /* Get operating voltage*/
+ validvoltage = (((response >> 31U) == 1U) ? 1U : 0U);
+ }
+
+ /* When power routine is finished and command returns valid voltage */
+ if (((response & (0xFF000000U)) >> 24) == 0xC0U)
+ {
+ hmmc->MmcCard.CardType = MMC_HIGH_CAPACITY_CARD;
+ }
+ else
+ {
+ hmmc->MmcCard.CardType = MMC_LOW_CAPACITY_CARD;
+ }
+
+ return HAL_MMC_ERROR_NONE;
+}
+
+/**
+ * @brief Turns the SDIO output signals off.
+ * @param hmmc: Pointer to MMC handle
+ * @retval None
+ */
+static void MMC_PowerOFF(MMC_HandleTypeDef *hmmc)
+{
+ /* Set Power State to OFF */
+ (void)SDIO_PowerState_OFF(hmmc->Instance);
+}
+
+/**
+ * @brief Returns the current card's status.
+ * @param hmmc: Pointer to MMC handle
+ * @param pCardStatus: pointer to the buffer that will contain the MMC card
+ * status (Card Status register)
+ * @retval error state
+ */
+static uint32_t MMC_SendStatus(MMC_HandleTypeDef *hmmc, uint32_t *pCardStatus)
+{
+ uint32_t errorstate;
+
+ if(pCardStatus == NULL)
+ {
+ return HAL_MMC_ERROR_PARAM;
+ }
+
+ /* Send Status command */
+ errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(hmmc->MmcCard.RelCardAdd << 16U));
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* Get MMC card status */
+ *pCardStatus = SDIO_GetResponse(hmmc->Instance, SDIO_RESP1);
+
+ return HAL_MMC_ERROR_NONE;
+}
+
+/**
+ * @brief Wrap up reading in non-blocking mode.
+ * @param hmmc: pointer to a MMC_HandleTypeDef structure that contains
+ * the configuration information.
+ * @retval None
+ */
+static void MMC_Read_IT(MMC_HandleTypeDef *hmmc)
+{
+ uint32_t count, data, dataremaining;
+ uint8_t* tmp;
+
+ tmp = hmmc->pRxBuffPtr;
+ dataremaining = hmmc->RxXferSize;
+
+ if (dataremaining > 0U)
+ {
+ /* Read data from SDIO Rx FIFO */
+ for(count = 0U; count < 8U; count++)
+ {
+ data = SDIO_ReadFIFO(hmmc->Instance);
+ *tmp = (uint8_t)(data & 0xFFU);
+ tmp++;
+ dataremaining--;
+ *tmp = (uint8_t)((data >> 8U) & 0xFFU);
+ tmp++;
+ dataremaining--;
+ *tmp = (uint8_t)((data >> 16U) & 0xFFU);
+ tmp++;
+ dataremaining--;
+ *tmp = (uint8_t)((data >> 24U) & 0xFFU);
+ tmp++;
+ dataremaining--;
+ }
+
+ hmmc->pRxBuffPtr = tmp;
+ hmmc->RxXferSize = dataremaining;
+ }
+}
+
+/**
+ * @brief Wrap up writing in non-blocking mode.
+ * @param hmmc: pointer to a MMC_HandleTypeDef structure that contains
+ * the configuration information.
+ * @retval None
+ */
+static void MMC_Write_IT(MMC_HandleTypeDef *hmmc)
+{
+ uint32_t count, data, dataremaining;
+ uint8_t* tmp;
+
+ tmp = hmmc->pTxBuffPtr;
+ dataremaining = hmmc->TxXferSize;
+
+ if (dataremaining > 0U)
+ {
+ /* Write data to SDIO Tx FIFO */
+ for(count = 0U; count < 8U; count++)
+ {
+ data = (uint32_t)(*tmp);
+ tmp++;
+ dataremaining--;
+ data |= ((uint32_t)(*tmp) << 8U);
+ tmp++;
+ dataremaining--;
+ data |= ((uint32_t)(*tmp) << 16U);
+ tmp++;
+ dataremaining--;
+ data |= ((uint32_t)(*tmp) << 24U);
+ tmp++;
+ dataremaining--;
+ (void)SDIO_WriteFIFO(hmmc->Instance, &data);
+ }
+
+ hmmc->pTxBuffPtr = tmp;
+ hmmc->TxXferSize = dataremaining;
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* SDIO */
+
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1