From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c | 1948 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 1,948 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c
new file mode 100644
index 0000000..aaa22f2
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c
@@ -0,0 +1,1948 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_rtc.c
+ * @author MCD Application Team
+ * @brief RTC HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Real Time Clock (RTC) peripheral:
+ * + Initialization and de-initialization functions
+ * + RTC Time and Date functions
+ * + RTC Alarm functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==================================================================
+ [..]
+ (+) Enable the RTC domain access (see description in the section above).
+ (+) Configure the RTC Prescaler (Asynchronous prescaler to generate RTC 1Hz time base)
+ using the HAL_RTC_Init() function.
+
+ *** Time and Date configuration ***
+ ===================================
+ [..]
+ (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime()
+ and HAL_RTC_SetDate() functions.
+ (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions.
+
+ *** Alarm configuration ***
+ ===========================
+ [..]
+ (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function.
+ You can also configure the RTC Alarm with interrupt mode using the HAL_RTC_SetAlarm_IT() function.
+ (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function.
+
+ *** Tamper configuration ***
+ ============================
+ [..]
+ (+) Enable the RTC Tamper and configure the Tamper Level using the
+ HAL_RTCEx_SetTamper() function. You can configure RTC Tamper with interrupt
+ mode using HAL_RTCEx_SetTamper_IT() function.
+ (+) The TAMPER1 alternate function can be mapped to PC13
+
+ *** Backup Data Registers configuration ***
+ ===========================================
+ [..]
+ (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite()
+ function.
+ (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead()
+ function.
+
+ ##### WARNING: Drivers Restrictions #####
+ ==================================================================
+ [..] RTC version used on STM32F1 families is version V1. All the features supported by V2
+ (other families) will be not supported on F1.
+ [..] As on V2, main RTC features are managed by HW. But on F1, date feature is completely
+ managed by SW.
+ [..] Then, there are some restrictions compared to other families:
+ (+) Only format 24 hours supported in HAL (format 12 hours not supported)
+ (+) Date is saved in SRAM. Then, when MCU is in STOP or STANDBY mode, date will be lost.
+ User should implement a way to save date before entering in low power mode (an
+ example is provided with firmware package based on backup registers)
+ (+) Date is automatically updated each time a HAL_RTC_GetTime or HAL_RTC_GetDate is called.
+ (+) Alarm detection is limited to 1 day. It will expire only 1 time (no alarm repetition, need
+ to program a new alarm)
+
+ ##### Backup Domain Operating Condition #####
+ ==============================================================================
+ [..] The real-time clock (RTC) and the RTC backup registers can be powered
+ from the VBAT voltage when the main VDD supply is powered off.
+ To retain the content of the RTC backup registers and supply the RTC
+ when VDD is turned off, VBAT pin can be connected to an optional
+ standby voltage supplied by a battery or by another source.
+
+ [..] To allow the RTC operating even when the main digital supply (VDD) is turned
+ off, the VBAT pin powers the following blocks:
+ (#) The RTC
+ (#) The LSE oscillator
+ (#) The backup SRAM when the low power backup regulator is enabled
+ (#) PC13 to PC15 I/Os, plus PI8 I/O (when available)
+
+ [..] When the backup domain is supplied by VDD (analog switch connected to VDD),
+ the following pins are available:
+ (+) PC13 can be used as a Tamper pin
+
+ [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT
+ because VDD is not present), the following pins are available:
+ (+) PC13 can be used as the Tamper pin
+
+ ##### Backup Domain Reset #####
+ ==================================================================
+ [..] The backup domain reset sets all RTC registers and the RCC_BDCR register
+ to their reset values.
+ [..] A backup domain reset is generated when one of the following events occurs:
+ (#) Software reset, triggered by setting the BDRST bit in the
+ RCC Backup domain control register (RCC_BDCR).
+ (#) VDD or VBAT power on, if both supplies have previously been powered off.
+ (#) Tamper detection event resets all data backup registers.
+
+ ##### Backup Domain Access #####
+ ==================================================================
+ [..] After reset, the backup domain (RTC registers, RTC backup data
+ registers and backup SRAM) is protected against possible unwanted write
+ accesses.
+ [..] To enable access to the RTC Domain and RTC registers, proceed as follows:
+ (+) Call the function HAL_RCCEx_PeriphCLKConfig in using RCC_PERIPHCLK_RTC for
+ PeriphClockSelection and select RTCClockSelection (LSE, LSI or HSE)
+ (+) Enable the BKP clock in using __HAL_RCC_BKP_CLK_ENABLE()
+
+ ##### RTC and low power modes #####
+ ==================================================================
+ [..] The MCU can be woken up from a low power mode by an RTC alternate
+ function.
+ [..] The RTC alternate functions are the RTC alarms (Alarm A),
+ and RTC tamper event detection.
+ These RTC alternate functions can wake up the system from the Stop and
+ Standby low power modes.
+ [..] The system can also wake up from low power modes without depending
+ on an external interrupt (Auto-wakeup mode), by using the RTC alarm.
+
+ *** Callback registration ***
+ =============================================
+ [..]
+ The compilation define USE_HAL_RTC_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+ Use Function @ref HAL_RTC_RegisterCallback() to register an interrupt callback.
+
+ [..]
+ Function @ref HAL_RTC_RegisterCallback() allows to register following callbacks:
+ (+) AlarmAEventCallback : RTC Alarm A Event callback.
+ (+) Tamper1EventCallback : RTC Tamper 1 Event callback.
+ (+) MspInitCallback : RTC MspInit callback.
+ (+) MspDeInitCallback : RTC MspDeInit callback.
+ [..]
+ This function takes as parameters the HAL peripheral handle, the Callback ID
+ and a pointer to the user callback function.
+
+ [..]
+ Use function @ref HAL_RTC_UnRegisterCallback() to reset a callback to the default
+ weak function.
+ @ref HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle,
+ and the Callback ID.
+ This function allows to reset following callbacks:
+ (+) AlarmAEventCallback : RTC Alarm A Event callback.
+ (+) Tamper1EventCallback : RTC Tamper 1 Event callback.
+ (+) MspInitCallback : RTC MspInit callback.
+ (+) MspDeInitCallback : RTC MspDeInit callback.
+ [..]
+ By default, after the @ref HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET,
+ all callbacks are set to the corresponding weak functions :
+ example @ref AlarmAEventCallback().
+ Exception done for MspInit and MspDeInit callbacks that are reset to the legacy weak function
+ in the @ref HAL_RTC_Init()/@ref HAL_RTC_DeInit() only when these callbacks are null
+ (not registered beforehand).
+ If not, MspInit or MspDeInit are not null, @ref HAL_RTC_Init()/@ref HAL_RTC_DeInit()
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
+ [..]
+ Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only.
+ Exception done MspInit/MspDeInit that can be registered/unregistered
+ in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state,
+ thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using @ref HAL_RTC_RegisterCallback() before calling @ref HAL_RTC_DeInit()
+ or @ref HAL_RTC_Init() function.
+ [..]
+ When The compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registration feature is not available and all callbacks
+ are set to the corresponding weak functions.
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RTC RTC
+ * @brief RTC HAL module driver
+ * @{
+ */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup RTC_Private_Constants RTC Private Constants
+ * @{
+ */
+#define RTC_ALARM_RESETVALUE_REGISTER (uint16_t)0xFFFF
+#define RTC_ALARM_RESETVALUE 0xFFFFFFFFU
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RTC_Private_Macros RTC Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup RTC_Private_Functions RTC Private Functions
+ * @{
+ */
+static uint32_t RTC_ReadTimeCounter(RTC_HandleTypeDef *hrtc);
+static HAL_StatusTypeDef RTC_WriteTimeCounter(RTC_HandleTypeDef *hrtc, uint32_t TimeCounter);
+static uint32_t RTC_ReadAlarmCounter(RTC_HandleTypeDef *hrtc);
+static HAL_StatusTypeDef RTC_WriteAlarmCounter(RTC_HandleTypeDef *hrtc, uint32_t AlarmCounter);
+static HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc);
+static HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc);
+static uint8_t RTC_ByteToBcd2(uint8_t Value);
+static uint8_t RTC_Bcd2ToByte(uint8_t Value);
+static uint8_t RTC_IsLeapYear(uint16_t nYear);
+static void RTC_DateUpdate(RTC_HandleTypeDef *hrtc, uint32_t DayElapsed);
+static uint8_t RTC_WeekDayNum(uint32_t nYear, uint8_t nMonth, uint8_t nDay);
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RTC_Exported_Functions RTC Exported Functions
+ * @{
+ */
+
+/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to initialize and configure the
+ RTC Prescaler (Asynchronous), disable RTC registers Write protection,
+ enter and exit the RTC initialization mode,
+ RTC registers synchronization check and reference clock detection enable.
+ (#) The RTC Prescaler should be programmed to generate the RTC 1Hz time base.
+ (#) All RTC registers are Write protected. Writing to the RTC registers
+ is enabled by setting the CNF bit in the RTC_CRL register.
+ (#) To read the calendar after wakeup from low power modes (Standby or Stop)
+ the software must first wait for the RSF bit (Register Synchronized Flag)
+ in the RTC_CRL register to be set by hardware.
+ The HAL_RTC_WaitForSynchro() function implements the above software
+ sequence (RSF clear and RSF check).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the RTC peripheral
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t prescaler = 0U;
+ /* Check input parameters */
+ if (hrtc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance));
+ assert_param(IS_RTC_CALIB_OUTPUT(hrtc->Init.OutPut));
+ assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv));
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+ if (hrtc->State == HAL_RTC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hrtc->Lock = HAL_UNLOCKED;
+
+ hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */
+ hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */
+
+ if (hrtc->MspInitCallback == NULL)
+ {
+ hrtc->MspInitCallback = HAL_RTC_MspInit;
+ }
+ /* Init the low level hardware */
+ hrtc->MspInitCallback(hrtc);
+
+ if (hrtc->MspDeInitCallback == NULL)
+ {
+ hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+ }
+ }
+#else
+ if (hrtc->State == HAL_RTC_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hrtc->Lock = HAL_UNLOCKED;
+
+ /* Initialize RTC MSP */
+ HAL_RTC_MspInit(hrtc);
+ }
+#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Waiting for synchro */
+ if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+ {
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+
+ /* Set Initialization mode */
+ if (RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Clear Flags Bits */
+ CLEAR_BIT(hrtc->Instance->CRL, (RTC_FLAG_OW | RTC_FLAG_ALRAF | RTC_FLAG_SEC));
+
+ if (hrtc->Init.OutPut != RTC_OUTPUTSOURCE_NONE)
+ {
+ /* Disable the selected Tamper pin */
+ CLEAR_BIT(BKP->CR, BKP_CR_TPE);
+ }
+
+ /* Set the signal which will be routed to RTC Tamper pin*/
+ MODIFY_REG(BKP->RTCCR, (BKP_RTCCR_CCO | BKP_RTCCR_ASOE | BKP_RTCCR_ASOS), hrtc->Init.OutPut);
+
+ if (hrtc->Init.AsynchPrediv != RTC_AUTO_1_SECOND)
+ {
+ /* RTC Prescaler provided directly by end-user*/
+ prescaler = hrtc->Init.AsynchPrediv;
+ }
+ else
+ {
+ /* RTC Prescaler will be automatically calculated to get 1 second timebase */
+ /* Get the RTCCLK frequency */
+ prescaler = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_RTC);
+
+ /* Check that RTC clock is enabled*/
+ if (prescaler == 0U)
+ {
+ /* Should not happen. Frequency is not available*/
+ hrtc->State = HAL_RTC_STATE_ERROR;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* RTC period = RTCCLK/(RTC_PR + 1) */
+ prescaler = prescaler - 1U;
+ }
+ }
+
+ /* Configure the RTC_PRLH / RTC_PRLL */
+ MODIFY_REG(hrtc->Instance->PRLH, RTC_PRLH_PRL, (prescaler >> 16U));
+ MODIFY_REG(hrtc->Instance->PRLL, RTC_PRLL_PRL, (prescaler & RTC_PRLL_PRL));
+
+ /* Wait for synchro */
+ if (RTC_ExitInitMode(hrtc) != HAL_OK)
+ {
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ return HAL_ERROR;
+ }
+
+ /* Initialize date to 1st of January 2000 */
+ hrtc->DateToUpdate.Year = 0x00U;
+ hrtc->DateToUpdate.Month = RTC_MONTH_JANUARY;
+ hrtc->DateToUpdate.Date = 0x01U;
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief DeInitializes the RTC peripheral
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @note This function does not reset the RTC Backup Data registers.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc)
+{
+ /* Check input parameters */
+ if (hrtc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance));
+
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Set Initialization mode */
+ if (RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ CLEAR_REG(hrtc->Instance->CNTL);
+ CLEAR_REG(hrtc->Instance->CNTH);
+ WRITE_REG(hrtc->Instance->PRLL, 0x00008000U);
+ CLEAR_REG(hrtc->Instance->PRLH);
+
+ /* Reset All CRH/CRL bits */
+ CLEAR_REG(hrtc->Instance->CRH);
+ CLEAR_REG(hrtc->Instance->CRL);
+
+ if (RTC_ExitInitMode(hrtc) != HAL_OK)
+ {
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Wait for synchro*/
+ HAL_RTC_WaitForSynchro(hrtc);
+
+ /* Clear RSF flag */
+ CLEAR_BIT(hrtc->Instance->CRL, RTC_FLAG_RSF);
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+ if (hrtc->MspDeInitCallback == NULL)
+ {
+ hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+ }
+
+ /* DeInit the low level hardware: CLOCK, NVIC.*/
+ hrtc->MspDeInitCallback(hrtc);
+
+#else
+ /* De-Initialize RTC MSP */
+ HAL_RTC_MspDeInit(hrtc);
+#endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */
+
+ hrtc->State = HAL_RTC_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Register a User RTC Callback
+ * To be used instead of the weak predefined callback
+ * @param hrtc RTC handle
+ * @param CallbackID ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID
+ * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID
+ * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID
+ * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID
+ * @param pCallback pointer to the Callback function
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if (pCallback == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hrtc);
+
+ if (HAL_RTC_STATE_READY == hrtc->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_RTC_ALARM_A_EVENT_CB_ID :
+ hrtc->AlarmAEventCallback = pCallback;
+ break;
+
+ case HAL_RTC_TAMPER1_EVENT_CB_ID :
+ hrtc->Tamper1EventCallback = pCallback;
+ break;
+
+ case HAL_RTC_MSPINIT_CB_ID :
+ hrtc->MspInitCallback = pCallback;
+ break;
+
+ case HAL_RTC_MSPDEINIT_CB_ID :
+ hrtc->MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (HAL_RTC_STATE_RESET == hrtc->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_RTC_MSPINIT_CB_ID :
+ hrtc->MspInitCallback = pCallback;
+ break;
+
+ case HAL_RTC_MSPDEINIT_CB_ID :
+ hrtc->MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hrtc);
+
+ return status;
+}
+
+/**
+ * @brief Unregister an RTC Callback
+ * RTC callabck is redirected to the weak predefined callback
+ * @param hrtc RTC handle
+ * @param CallbackID ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID
+ * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Callback ID
+ * @arg @ref HAL_RTC_MSPINIT_CB_ID Msp Init callback ID
+ * @arg @ref HAL_RTC_MSPDEINIT_CB_ID Msp DeInit callback ID
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hrtc);
+
+ if (HAL_RTC_STATE_READY == hrtc->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_RTC_ALARM_A_EVENT_CB_ID :
+ hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */
+ break;
+
+ case HAL_RTC_TAMPER1_EVENT_CB_ID :
+ hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */
+ break;
+
+ case HAL_RTC_MSPINIT_CB_ID :
+ hrtc->MspInitCallback = HAL_RTC_MspInit;
+ break;
+
+ case HAL_RTC_MSPDEINIT_CB_ID :
+ hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (HAL_RTC_STATE_RESET == hrtc->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_RTC_MSPINIT_CB_ID :
+ hrtc->MspInitCallback = HAL_RTC_MspInit;
+ break;
+
+ case HAL_RTC_MSPDEINIT_CB_ID :
+ hrtc->MspDeInitCallback = HAL_RTC_MspDeInit;
+ break;
+
+ default :
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hrtc);
+
+ return status;
+}
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+/**
+ * @brief Initializes the RTC MSP.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief DeInitializes the RTC MSP.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group2 Time and Date functions
+ * @brief RTC Time and Date functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Time and Date functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Time and Date features
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets RTC current time.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTime: Pointer to Time structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+ uint32_t counter_time = 0U, counter_alarm = 0U;
+
+ /* Check input parameters */
+ if ((hrtc == NULL) || (sTime == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if (Format == RTC_FORMAT_BIN)
+ {
+ assert_param(IS_RTC_HOUR24(sTime->Hours));
+ assert_param(IS_RTC_MINUTES(sTime->Minutes));
+ assert_param(IS_RTC_SECONDS(sTime->Seconds));
+
+ counter_time = (uint32_t)(((uint32_t)sTime->Hours * 3600U) + \
+ ((uint32_t)sTime->Minutes * 60U) + \
+ ((uint32_t)sTime->Seconds));
+ }
+ else
+ {
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours)));
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds)));
+
+ counter_time = (((uint32_t)(RTC_Bcd2ToByte(sTime->Hours)) * 3600U) + \
+ ((uint32_t)(RTC_Bcd2ToByte(sTime->Minutes)) * 60U) + \
+ ((uint32_t)(RTC_Bcd2ToByte(sTime->Seconds))));
+ }
+
+ /* Write time counter in RTC registers */
+ if (RTC_WriteTimeCounter(hrtc, counter_time) != HAL_OK)
+ {
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Clear Second and overflow flags */
+ CLEAR_BIT(hrtc->Instance->CRL, (RTC_FLAG_SEC | RTC_FLAG_OW));
+
+ /* Read current Alarm counter in RTC registers */
+ counter_alarm = RTC_ReadAlarmCounter(hrtc);
+
+ /* Set again alarm to match with new time if enabled */
+ if (counter_alarm != RTC_ALARM_RESETVALUE)
+ {
+ if (counter_alarm < counter_time)
+ {
+ /* Add 1 day to alarm counter*/
+ counter_alarm += (uint32_t)(24U * 3600U);
+
+ /* Write new Alarm counter in RTC registers */
+ if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK)
+ {
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Gets RTC current time.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sTime: Pointer to Time structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+ uint32_t counter_time = 0U, counter_alarm = 0U, days_elapsed = 0U, hours = 0U;
+
+ /* Check input parameters */
+ if ((hrtc == NULL) || (sTime == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Check if counter overflow occurred */
+ if (__HAL_RTC_OVERFLOW_GET_FLAG(hrtc, RTC_FLAG_OW))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Read the time counter*/
+ counter_time = RTC_ReadTimeCounter(hrtc);
+
+ /* Fill the structure fields with the read parameters */
+ hours = counter_time / 3600U;
+ sTime->Minutes = (uint8_t)((counter_time % 3600U) / 60U);
+ sTime->Seconds = (uint8_t)((counter_time % 3600U) % 60U);
+
+ if (hours >= 24U)
+ {
+ /* Get number of days elapsed from last calculation */
+ days_elapsed = (hours / 24U);
+
+ /* Set Hours in RTC_TimeTypeDef structure*/
+ sTime->Hours = (hours % 24U);
+
+ /* Read Alarm counter in RTC registers */
+ counter_alarm = RTC_ReadAlarmCounter(hrtc);
+
+ /* Calculate remaining time to reach alarm (only if set and not yet expired)*/
+ if ((counter_alarm != RTC_ALARM_RESETVALUE) && (counter_alarm > counter_time))
+ {
+ counter_alarm -= counter_time;
+ }
+ else
+ {
+ /* In case of counter_alarm < counter_time */
+ /* Alarm expiration already occurred but alarm not deactivated */
+ counter_alarm = RTC_ALARM_RESETVALUE;
+ }
+
+ /* Set updated time in decreasing counter by number of days elapsed */
+ counter_time -= (days_elapsed * 24U * 3600U);
+
+ /* Write time counter in RTC registers */
+ if (RTC_WriteTimeCounter(hrtc, counter_time) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Set updated alarm to be set */
+ if (counter_alarm != RTC_ALARM_RESETVALUE)
+ {
+ counter_alarm += counter_time;
+
+ /* Write time counter in RTC registers */
+ if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Alarm already occurred. Set it to reset values to avoid unexpected expiration */
+ if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /* Update date */
+ RTC_DateUpdate(hrtc, days_elapsed);
+ }
+ else
+ {
+ sTime->Hours = hours;
+ }
+
+ /* Check the input parameters format */
+ if (Format != RTC_FORMAT_BIN)
+ {
+ /* Convert the time structure parameters to BCD format */
+ sTime->Hours = (uint8_t)RTC_ByteToBcd2(sTime->Hours);
+ sTime->Minutes = (uint8_t)RTC_ByteToBcd2(sTime->Minutes);
+ sTime->Seconds = (uint8_t)RTC_ByteToBcd2(sTime->Seconds);
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Sets RTC current date.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sDate: Pointer to date structure
+ * @param Format: specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+ uint32_t counter_time = 0U, counter_alarm = 0U, hours = 0U;
+
+ /* Check input parameters */
+ if ((hrtc == NULL) || (sDate == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ if (Format == RTC_FORMAT_BIN)
+ {
+ assert_param(IS_RTC_YEAR(sDate->Year));
+ assert_param(IS_RTC_MONTH(sDate->Month));
+ assert_param(IS_RTC_DATE(sDate->Date));
+
+ /* Change the current date */
+ hrtc->DateToUpdate.Year = sDate->Year;
+ hrtc->DateToUpdate.Month = sDate->Month;
+ hrtc->DateToUpdate.Date = sDate->Date;
+ }
+ else
+ {
+ assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year)));
+ assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month)));
+ assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date)));
+
+ /* Change the current date */
+ hrtc->DateToUpdate.Year = RTC_Bcd2ToByte(sDate->Year);
+ hrtc->DateToUpdate.Month = RTC_Bcd2ToByte(sDate->Month);
+ hrtc->DateToUpdate.Date = RTC_Bcd2ToByte(sDate->Date);
+ }
+
+ /* WeekDay set by user can be ignored because automatically calculated */
+ hrtc->DateToUpdate.WeekDay = RTC_WeekDayNum(hrtc->DateToUpdate.Year, hrtc->DateToUpdate.Month, hrtc->DateToUpdate.Date);
+ sDate->WeekDay = hrtc->DateToUpdate.WeekDay;
+
+ /* Reset time to be aligned on the same day */
+ /* Read the time counter*/
+ counter_time = RTC_ReadTimeCounter(hrtc);
+
+ /* Fill the structure fields with the read parameters */
+ hours = counter_time / 3600U;
+ if (hours > 24U)
+ {
+ /* Set updated time in decreasing counter by number of days elapsed */
+ counter_time -= ((hours / 24U) * 24U * 3600U);
+ /* Write time counter in RTC registers */
+ if (RTC_WriteTimeCounter(hrtc, counter_time) != HAL_OK)
+ {
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+
+ /* Read current Alarm counter in RTC registers */
+ counter_alarm = RTC_ReadAlarmCounter(hrtc);
+
+ /* Set again alarm to match with new time if enabled */
+ if (counter_alarm != RTC_ALARM_RESETVALUE)
+ {
+ if (counter_alarm < counter_time)
+ {
+ /* Add 1 day to alarm counter*/
+ counter_alarm += (uint32_t)(24U * 3600U);
+
+ /* Write new Alarm counter in RTC registers */
+ if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK)
+ {
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+ }
+
+
+ }
+
+ hrtc->State = HAL_RTC_STATE_READY ;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets RTC current date.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sDate: Pointer to Date structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+ RTC_TimeTypeDef stime = {0U};
+
+ /* Check input parameters */
+ if ((hrtc == NULL) || (sDate == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+
+ /* Call HAL_RTC_GetTime function to update date if counter higher than 24 hours */
+ if (HAL_RTC_GetTime(hrtc, &stime, RTC_FORMAT_BIN) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Fill the structure fields with the read parameters */
+ sDate->WeekDay = hrtc->DateToUpdate.WeekDay;
+ sDate->Year = hrtc->DateToUpdate.Year;
+ sDate->Month = hrtc->DateToUpdate.Month;
+ sDate->Date = hrtc->DateToUpdate.Date;
+
+ /* Check the input parameters format */
+ if (Format != RTC_FORMAT_BIN)
+ {
+ /* Convert the date structure parameters to BCD format */
+ sDate->Year = (uint8_t)RTC_ByteToBcd2(sDate->Year);
+ sDate->Month = (uint8_t)RTC_ByteToBcd2(sDate->Month);
+ sDate->Date = (uint8_t)RTC_ByteToBcd2(sDate->Date);
+ }
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group3 Alarm functions
+ * @brief RTC Alarm functions
+ *
+@verbatim
+ ===============================================================================
+ ##### RTC Alarm functions #####
+ ===============================================================================
+
+ [..] This section provides functions allowing to configure Alarm feature
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets the specified RTC Alarm.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Alarm structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+ uint32_t counter_alarm = 0U, counter_time;
+ RTC_TimeTypeDef stime = {0U};
+
+ /* Check input parameters */
+ if ((hrtc == NULL) || (sAlarm == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Call HAL_RTC_GetTime function to update date if counter higher than 24 hours */
+ if (HAL_RTC_GetTime(hrtc, &stime, RTC_FORMAT_BIN) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Convert time in seconds */
+ counter_time = (uint32_t)(((uint32_t)stime.Hours * 3600U) + \
+ ((uint32_t)stime.Minutes * 60U) + \
+ ((uint32_t)stime.Seconds));
+
+ if (Format == RTC_FORMAT_BIN)
+ {
+ assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+ assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+ assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+ counter_alarm = (uint32_t)(((uint32_t)sAlarm->AlarmTime.Hours * 3600U) + \
+ ((uint32_t)sAlarm->AlarmTime.Minutes * 60U) + \
+ ((uint32_t)sAlarm->AlarmTime.Seconds));
+ }
+ else
+ {
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+ counter_alarm = (((uint32_t)(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)) * 3600U) + \
+ ((uint32_t)(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)) * 60U) + \
+ ((uint32_t)RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+ }
+
+ /* Check that requested alarm should expire in the same day (otherwise add 1 day) */
+ if (counter_alarm < counter_time)
+ {
+ /* Add 1 day to alarm counter*/
+ counter_alarm += (uint32_t)(24U * 3600U);
+ }
+
+ /* Write Alarm counter in RTC registers */
+ if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK)
+ {
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+ }
+}
+#include "board_common.h"
+/**
+ * @brief Sets the specified RTC Alarm with Interrupt
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Alarm structure
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+ uint32_t counter_alarm = 0U, counter_time;
+ RTC_TimeTypeDef stime = {0U};
+
+ /* Check input parameters */
+ if ((hrtc == NULL) || (sAlarm == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* Call HAL_RTC_GetTime function to update date if counter higher than 24 hours */
+ if (HAL_RTC_GetTime(hrtc, &stime, RTC_FORMAT_BIN) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Convert time in seconds */
+ counter_time = (uint32_t)(((uint32_t)stime.Hours * 3600U) + \
+ ((uint32_t)stime.Minutes * 60U) + \
+ ((uint32_t)stime.Seconds));
+
+ if (Format == RTC_FORMAT_BIN)
+ {
+ assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+ assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+ assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+
+ counter_alarm = (uint32_t)(((uint32_t)sAlarm->AlarmTime.Hours * 3600U) + \
+ ((uint32_t)sAlarm->AlarmTime.Minutes * 60U) + \
+ ((uint32_t)sAlarm->AlarmTime.Seconds));
+ }
+ else
+ {
+ assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+ assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+ assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+
+ counter_alarm = (((uint32_t)(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)) * 3600U) + \
+ ((uint32_t)(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)) * 60U) + \
+ ((uint32_t)RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+ }
+
+ /* Check that requested alarm should expire in the same day (otherwise add 1 day) */
+ if (counter_alarm < counter_time)
+ {
+ /* Add 1 day to alarm counter*/
+ counter_alarm += (uint32_t)(24U * 3600U);
+ }
+ /* Write alarm counter in RTC registers */
+ if (RTC_WriteAlarmCounter(hrtc, counter_alarm) != HAL_OK)
+ {
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Clear flag alarm A */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+ /* Configure the Alarm interrupt */
+ __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRA);
+
+ /* RTC Alarm Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_ALARM_EXTI_ENABLE_IT();
+
+ __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();
+
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+ }
+}
+
+/**
+ * @brief Gets the RTC Alarm value and masks.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param sAlarm: Pointer to Date structure
+ * @param Alarm: Specifies the Alarm.
+ * This parameter can be one of the following values:
+ * @arg RTC_ALARM_A: Alarm
+ * @param Format: Specifies the format of the entered parameters.
+ * This parameter can be one of the following values:
+ * @arg RTC_FORMAT_BIN: Binary data format
+ * @arg RTC_FORMAT_BCD: BCD data format
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format)
+{
+ uint32_t counter_alarm = 0U;
+
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(Alarm);
+
+ /* Check input parameters */
+ if ((hrtc == NULL) || (sAlarm == NULL))
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_RTC_FORMAT(Format));
+ assert_param(IS_RTC_ALARM(Alarm));
+
+ /* Read Alarm counter in RTC registers */
+ counter_alarm = RTC_ReadAlarmCounter(hrtc);
+
+ /* Fill the structure with the read parameters */
+ /* Set hours in a day range (between 0 to 24)*/
+ sAlarm->AlarmTime.Hours = (uint32_t)((counter_alarm / 3600U) % 24U);
+ sAlarm->AlarmTime.Minutes = (uint32_t)((counter_alarm % 3600U) / 60U);
+ sAlarm->AlarmTime.Seconds = (uint32_t)((counter_alarm % 3600U) % 60U);
+
+ if (Format != RTC_FORMAT_BIN)
+ {
+ sAlarm->AlarmTime.Hours = RTC_ByteToBcd2(sAlarm->AlarmTime.Hours);
+ sAlarm->AlarmTime.Minutes = RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes);
+ sAlarm->AlarmTime.Seconds = RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Deactive the specified RTC Alarm
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Alarm: Specifies the Alarm.
+ * This parameter can be one of the following values:
+ * @arg RTC_ALARM_A: AlarmA
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(Alarm);
+
+ /* Check the parameters */
+ assert_param(IS_RTC_ALARM(Alarm));
+
+ /* Check input parameters */
+ if (hrtc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hrtc);
+
+ hrtc->State = HAL_RTC_STATE_BUSY;
+
+ /* In case of interrupt mode is used, the interrupt source must disabled */
+ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+ /* Set Initialization mode */
+ if (RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ /* Set RTC state */
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Clear flag alarm A */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+ /* Set to default values ALRH & ALRL registers */
+ WRITE_REG(hrtc->Instance->ALRH, RTC_ALARM_RESETVALUE_REGISTER);
+ WRITE_REG(hrtc->Instance->ALRL, RTC_ALARM_RESETVALUE_REGISTER);
+
+ /* RTC Alarm Interrupt Configuration: Disable EXTI configuration */
+ __HAL_RTC_ALARM_EXTI_DISABLE_IT();
+
+ /* Wait for synchro */
+ if (RTC_ExitInitMode(hrtc) != HAL_OK)
+ {
+ hrtc->State = HAL_RTC_STATE_ERROR;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_ERROR;
+ }
+ }
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrtc);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief This function handles Alarm interrupt request.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc)
+{
+ if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA))
+ {
+ /* Get the status of the Interrupt */
+ if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != (uint32_t)RESET)
+ {
+ /* AlarmA callback */
+#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1)
+ hrtc->AlarmAEventCallback(hrtc);
+#else
+ HAL_RTC_AlarmAEventCallback(hrtc);
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
+
+ /* Clear the Alarm interrupt pending bit */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+ }
+ }
+
+ /* Clear the EXTI's line Flag for RTC Alarm */
+ __HAL_RTC_ALARM_EXTI_CLEAR_FLAG();
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+ * @brief Alarm A callback.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval None
+ */
+__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hrtc);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_RTC_AlarmAEventCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief This function handles AlarmA Polling request.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+ uint32_t tickstart = HAL_GetTick();
+
+ /* Check input parameters */
+ if (hrtc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == RESET)
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if ((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+ {
+ hrtc->State = HAL_RTC_STATE_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Clear the Alarm interrupt pending bit */
+ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+ /* Change RTC state */
+ hrtc->State = HAL_RTC_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Get RTC state
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Returns the RTC state.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL state
+ */
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc)
+{
+ return hrtc->State;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Exported_Functions_Group5 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Wait for RTC Time and Date Synchronization
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL)
+ * are synchronized with RTC APB clock.
+ * @note This function must be called before any read operation after an APB reset
+ * or an APB clock stop.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Check input parameters */
+ if (hrtc == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Clear RSF flag */
+ CLEAR_BIT(hrtc->Instance->CRL, RTC_FLAG_RSF);
+
+ tickstart = HAL_GetTick();
+
+ /* Wait the registers to be synchronised */
+ while ((hrtc->Instance->CRL & RTC_FLAG_RSF) == (uint32_t)RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Private_Functions
+ * @{
+ */
+
+
+/**
+ * @brief Read the time counter available in RTC_CNT registers.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval Time counter
+ */
+static uint32_t RTC_ReadTimeCounter(RTC_HandleTypeDef *hrtc)
+{
+ uint16_t high1 = 0U, high2 = 0U, low = 0U;
+ uint32_t timecounter = 0U;
+
+ high1 = READ_REG(hrtc->Instance->CNTH & RTC_CNTH_RTC_CNT);
+ low = READ_REG(hrtc->Instance->CNTL & RTC_CNTL_RTC_CNT);
+ high2 = READ_REG(hrtc->Instance->CNTH & RTC_CNTH_RTC_CNT);
+
+ if (high1 != high2)
+ {
+ /* In this case the counter roll over during reading of CNTL and CNTH registers,
+ read again CNTL register then return the counter value */
+ timecounter = (((uint32_t) high2 << 16U) | READ_REG(hrtc->Instance->CNTL & RTC_CNTL_RTC_CNT));
+ }
+ else
+ {
+ /* No counter roll over during reading of CNTL and CNTH registers, counter
+ value is equal to first value of CNTL and CNTH */
+ timecounter = (((uint32_t) high1 << 16U) | low);
+ }
+
+ return timecounter;
+}
+
+/**
+ * @brief Write the time counter in RTC_CNT registers.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param TimeCounter: Counter to write in RTC_CNT registers
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef RTC_WriteTimeCounter(RTC_HandleTypeDef *hrtc, uint32_t TimeCounter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Set Initialization mode */
+ if (RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Set RTC COUNTER MSB word */
+ WRITE_REG(hrtc->Instance->CNTH, (TimeCounter >> 16U));
+ /* Set RTC COUNTER LSB word */
+ WRITE_REG(hrtc->Instance->CNTL, (TimeCounter & RTC_CNTL_RTC_CNT));
+
+ /* Wait for synchro */
+ if (RTC_ExitInitMode(hrtc) != HAL_OK)
+ {
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Read the time counter available in RTC_ALR registers.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval Time counter
+ */
+static uint32_t RTC_ReadAlarmCounter(RTC_HandleTypeDef *hrtc)
+{
+ uint16_t high1 = 0U, low = 0U;
+
+ high1 = READ_REG(hrtc->Instance->ALRH & RTC_CNTH_RTC_CNT);
+ low = READ_REG(hrtc->Instance->ALRL & RTC_CNTL_RTC_CNT);
+
+ return (((uint32_t) high1 << 16U) | low);
+}
+
+/**
+ * @brief Write the time counter in RTC_ALR registers.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param AlarmCounter: Counter to write in RTC_ALR registers
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef RTC_WriteAlarmCounter(RTC_HandleTypeDef *hrtc, uint32_t AlarmCounter)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Set Initialization mode */
+ if (RTC_EnterInitMode(hrtc) != HAL_OK)
+ {
+ status = HAL_ERROR;
+ }
+ else
+ {
+ /* Set RTC COUNTER MSB word */
+ WRITE_REG(hrtc->Instance->ALRH, (AlarmCounter >> 16U));
+ /* Set RTC COUNTER LSB word */
+ WRITE_REG(hrtc->Instance->ALRL, (AlarmCounter & RTC_ALRL_RTC_ALR));
+
+ /* Wait for synchro */
+ if (RTC_ExitInitMode(hrtc) != HAL_OK)
+ {
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * @brief Enters the RTC Initialization mode.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ tickstart = HAL_GetTick();
+ /* Wait till RTC is in INIT state and if Time out is reached exit */
+ while ((hrtc->Instance->CRL & RTC_CRL_RTOFF) == (uint32_t)RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Exit the RTC Initialization mode.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc)
+{
+ uint32_t tickstart = 0U;
+
+ /* Disable the write protection for RTC registers */
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+ tickstart = HAL_GetTick();
+ /* Wait till RTC is in INIT state and if Time out is reached exit */
+ while ((hrtc->Instance->CRL & RTC_CRL_RTOFF) == (uint32_t)RESET)
+ {
+ if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Converts a 2 digit decimal to BCD format.
+ * @param Value: Byte to be converted
+ * @retval Converted byte
+ */
+static uint8_t RTC_ByteToBcd2(uint8_t Value)
+{
+ uint32_t bcdhigh = 0U;
+
+ while (Value >= 10U)
+ {
+ bcdhigh++;
+ Value -= 10U;
+ }
+
+ return ((uint8_t)(bcdhigh << 4U) | Value);
+}
+
+/**
+ * @brief Converts from 2 digit BCD to Binary.
+ * @param Value: BCD value to be converted
+ * @retval Converted word
+ */
+static uint8_t RTC_Bcd2ToByte(uint8_t Value)
+{
+ uint32_t tmp = 0U;
+ tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10U;
+ return (tmp + (Value & (uint8_t)0x0F));
+}
+
+/**
+ * @brief Updates date when time is 23:59:59.
+ * @param hrtc pointer to a RTC_HandleTypeDef structure that contains
+ * the configuration information for RTC.
+ * @param DayElapsed: Number of days elapsed from last date update
+ * @retval None
+ */
+static void RTC_DateUpdate(RTC_HandleTypeDef *hrtc, uint32_t DayElapsed)
+{
+ uint32_t year = 0U, month = 0U, day = 0U;
+ uint32_t loop = 0U;
+
+ /* Get the current year*/
+ year = hrtc->DateToUpdate.Year;
+
+ /* Get the current month and day */
+ month = hrtc->DateToUpdate.Month;
+ day = hrtc->DateToUpdate.Date;
+
+ for (loop = 0U; loop < DayElapsed; loop++)
+ {
+ if ((month == 1U) || (month == 3U) || (month == 5U) || (month == 7U) || \
+ (month == 8U) || (month == 10U) || (month == 12U))
+ {
+ if (day < 31U)
+ {
+ day++;
+ }
+ /* Date structure member: day = 31 */
+ else
+ {
+ if (month != 12U)
+ {
+ month++;
+ day = 1U;
+ }
+ /* Date structure member: day = 31 & month =12 */
+ else
+ {
+ month = 1U;
+ day = 1U;
+ year++;
+ }
+ }
+ }
+ else if ((month == 4U) || (month == 6U) || (month == 9U) || (month == 11U))
+ {
+ if (day < 30U)
+ {
+ day++;
+ }
+ /* Date structure member: day = 30 */
+ else
+ {
+ month++;
+ day = 1U;
+ }
+ }
+ else if (month == 2U)
+ {
+ if (day < 28U)
+ {
+ day++;
+ }
+ else if (day == 28U)
+ {
+ /* Leap year */
+ if (RTC_IsLeapYear(year))
+ {
+ day++;
+ }
+ else
+ {
+ month++;
+ day = 1U;
+ }
+ }
+ else if (day == 29U)
+ {
+ month++;
+ day = 1U;
+ }
+ }
+ }
+
+ /* Update year */
+ hrtc->DateToUpdate.Year = year;
+
+ /* Update day and month */
+ hrtc->DateToUpdate.Month = month;
+ hrtc->DateToUpdate.Date = day;
+
+ /* Update day of the week */
+ hrtc->DateToUpdate.WeekDay = RTC_WeekDayNum(year, month, day);
+}
+
+/**
+ * @brief Check whether the passed year is Leap or not.
+ * @param nYear year to check
+ * @retval 1: leap year
+ * 0: not leap year
+ */
+static uint8_t RTC_IsLeapYear(uint16_t nYear)
+{
+ if ((nYear % 4U) != 0U)
+ {
+ return 0U;
+ }
+
+ if ((nYear % 100U) != 0U)
+ {
+ return 1U;
+ }
+
+ if ((nYear % 400U) == 0U)
+ {
+ return 1U;
+ }
+ else
+ {
+ return 0U;
+ }
+}
+
+/**
+ * @brief Determines the week number, the day number and the week day number.
+ * @param nYear year to check
+ * @param nMonth Month to check
+ * @param nDay Day to check
+ * @note Day is calculated with hypothesis that year > 2000
+ * @retval Value which can take one of the following parameters:
+ * @arg RTC_WEEKDAY_MONDAY
+ * @arg RTC_WEEKDAY_TUESDAY
+ * @arg RTC_WEEKDAY_WEDNESDAY
+ * @arg RTC_WEEKDAY_THURSDAY
+ * @arg RTC_WEEKDAY_FRIDAY
+ * @arg RTC_WEEKDAY_SATURDAY
+ * @arg RTC_WEEKDAY_SUNDAY
+ */
+static uint8_t RTC_WeekDayNum(uint32_t nYear, uint8_t nMonth, uint8_t nDay)
+{
+ uint32_t year = 0U, weekday = 0U;
+
+ year = 2000U + nYear;
+
+ if (nMonth < 3U)
+ {
+ /*D = { [(23 x month)/9] + day + 4 + year + [(year-1)/4] - [(year-1)/100] + [(year-1)/400] } mod 7*/
+ weekday = (((23U * nMonth) / 9U) + nDay + 4U + year + ((year - 1U) / 4U) - ((year - 1U) / 100U) + ((year - 1U) / 400U)) % 7U;
+ }
+ else
+ {
+ /*D = { [(23 x month)/9] + day + 4 + year + [year/4] - [year/100] + [year/400] - 2 } mod 7*/
+ weekday = (((23U * nMonth) / 9U) + nDay + 4U + year + (year / 4U) - (year / 100U) + (year / 400U) - 2U) % 7U;
+ }
+
+ return (uint8_t)weekday;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1