From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sd.c | 3243 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 3,243 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sd.c b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sd.c
new file mode 100644
index 0000000..0381726
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_sd.c
@@ -0,0 +1,3243 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_sd.c
+ * @author MCD Application Team
+ * @brief SD card HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Secure Digital (SD) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ This driver implements a high level communication layer for read and write from/to
+ this memory. The needed STM32 hardware resources (SDIO and GPIO) are performed by
+ the user in HAL_SD_MspInit() function (MSP layer).
+ Basically, the MSP layer configuration should be the same as we provide in the
+ examples.
+ You can easily tailor this configuration according to hardware resources.
+
+ [..]
+ This driver is a generic layered driver for SDIO memories which uses the HAL
+ SDIO driver functions to interface with SD and uSD cards devices.
+ It is used as follows:
+
+ (#)Initialize the SDIO low level resources by implementing the HAL_SD_MspInit() API:
+ (##) Enable the SDIO interface clock using __HAL_RCC_SDIO_CLK_ENABLE();
+ (##) SDIO pins configuration for SD card
+ (+++) Enable the clock for the SDIO GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE();
+ (+++) Configure these SDIO pins as alternate function pull-up using HAL_GPIO_Init()
+ and according to your pin assignment;
+ (##) DMA configuration if you need to use DMA process (HAL_SD_ReadBlocks_DMA()
+ and HAL_SD_WriteBlocks_DMA() APIs).
+ (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE();
+ (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled.
+ (##) NVIC configuration if you need to use interrupt process when using DMA transfer.
+ (+++) Configure the SDIO and DMA interrupt priorities using functions
+ HAL_NVIC_SetPriority(); DMA priority is superior to SDIO's priority
+ (+++) Enable the NVIC DMA and SDIO IRQs using function HAL_NVIC_EnableIRQ()
+ (+++) SDIO interrupts are managed using the macros __HAL_SD_ENABLE_IT()
+ and __HAL_SD_DISABLE_IT() inside the communication process.
+ (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_GET_IT()
+ and __HAL_SD_CLEAR_IT()
+ (##) NVIC configuration if you need to use interrupt process (HAL_SD_ReadBlocks_IT()
+ and HAL_SD_WriteBlocks_IT() APIs).
+ (+++) Configure the SDIO interrupt priorities using function HAL_NVIC_SetPriority();
+ (+++) Enable the NVIC SDIO IRQs using function HAL_NVIC_EnableIRQ()
+ (+++) SDIO interrupts are managed using the macros __HAL_SD_ENABLE_IT()
+ and __HAL_SD_DISABLE_IT() inside the communication process.
+ (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_GET_IT()
+ and __HAL_SD_CLEAR_IT()
+ (#) At this stage, you can perform SD read/write/erase operations after SD card initialization
+
+
+ *** SD Card Initialization and configuration ***
+ ================================================
+ [..]
+ To initialize the SD Card, use the HAL_SD_Init() function. It Initializes
+ SDIO Peripheral(STM32 side) and the SD Card, and put it into StandBy State (Ready for data transfer).
+ This function provide the following operations:
+
+ (#) Apply the SD Card initialization process at 400KHz and check the SD Card
+ type (Standard Capacity or High Capacity). You can change or adapt this
+ frequency by adjusting the "ClockDiv" field.
+ The SD Card frequency (SDIO_CK) is computed as follows:
+
+ SDIO_CK = SDIOCLK / (ClockDiv + 2)
+
+ In initialization mode and according to the SD Card standard,
+ make sure that the SDIO_CK frequency doesn't exceed 400KHz.
+
+ This phase of initialization is done through SDIO_Init() and
+ SDIO_PowerState_ON() SDIO low level APIs.
+
+ (#) Initialize the SD card. The API used is HAL_SD_InitCard().
+ This phase allows the card initialization and identification
+ and check the SD Card type (Standard Capacity or High Capacity)
+ The initialization flow is compatible with SD standard.
+
+ This API (HAL_SD_InitCard()) could be used also to reinitialize the card in case
+ of plug-off plug-in.
+
+ (#) Configure the SD Card Data transfer frequency. You can change or adapt this
+ frequency by adjusting the "ClockDiv" field.
+ In transfer mode and according to the SD Card standard, make sure that the
+ SDIO_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch.
+ To be able to use a frequency higher than 24MHz, you should use the SDIO
+ peripheral in bypass mode. Refer to the corresponding reference manual
+ for more details.
+
+ (#) Select the corresponding SD Card according to the address read with the step 2.
+
+ (#) Configure the SD Card in wide bus mode: 4-bits data.
+
+ *** SD Card Read operation ***
+ ==============================
+ [..]
+ (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_SD_GetCardState() function for SD card state.
+
+ (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_SD_GetCardState() function for SD card state.
+ You could also check the DMA transfer process through the SD Rx interrupt event.
+
+ (+) You can read from SD card in Interrupt mode by using function HAL_SD_ReadBlocks_IT().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_SD_GetCardState() function for SD card state.
+ You could also check the IT transfer process through the SD Rx interrupt event.
+
+ *** SD Card Write operation ***
+ ===============================
+ [..]
+ (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_SD_GetCardState() function for SD card state.
+
+ (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_SD_GetCardState() function for SD card state.
+ You could also check the DMA transfer process through the SD Tx interrupt event.
+
+ (+) You can write to SD card in Interrupt mode by using function HAL_SD_WriteBlocks_IT().
+ This function support only 512-bytes block length (the block size should be
+ chosen as 512 bytes).
+ You can choose either one block read operation or multiple block read operation
+ by adjusting the "NumberOfBlocks" parameter.
+ After this, you have to ensure that the transfer is done correctly. The check is done
+ through HAL_SD_GetCardState() function for SD card state.
+ You could also check the IT transfer process through the SD Tx interrupt event.
+
+ *** SD card status ***
+ ======================
+ [..]
+ (+) The SD Status contains status bits that are related to the SD Memory
+ Card proprietary features. To get SD card status use the HAL_SD_GetCardStatus().
+
+ *** SD card information ***
+ ===========================
+ [..]
+ (+) To get SD card information, you can use the function HAL_SD_GetCardInfo().
+ It returns useful information about the SD card such as block size, card type,
+ block number ...
+
+ *** SD card CSD register ***
+ ============================
+ (+) The HAL_SD_GetCardCSD() API allows to get the parameters of the CSD register.
+ Some of the CSD parameters are useful for card initialization and identification.
+
+ *** SD card CID register ***
+ ============================
+ (+) The HAL_SD_GetCardCID() API allows to get the parameters of the CID register.
+ Some of the CSD parameters are useful for card initialization and identification.
+
+ *** SD HAL driver macros list ***
+ ==================================
+ [..]
+ Below the list of most used macros in SD HAL driver.
+
+ (+) __HAL_SD_ENABLE : Enable the SD device
+ (+) __HAL_SD_DISABLE : Disable the SD device
+ (+) __HAL_SD_DMA_ENABLE: Enable the SDIO DMA transfer
+ (+) __HAL_SD_DMA_DISABLE: Disable the SDIO DMA transfer
+ (+) __HAL_SD_ENABLE_IT: Enable the SD device interrupt
+ (+) __HAL_SD_DISABLE_IT: Disable the SD device interrupt
+ (+) __HAL_SD_GET_FLAG:Check whether the specified SD flag is set or not
+ (+) __HAL_SD_CLEAR_FLAG: Clear the SD's pending flags
+
+ (@) You can refer to the SD HAL driver header file for more useful macros
+
+ *** Callback registration ***
+ =============================================
+ [..]
+ The compilation define USE_HAL_SD_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+
+ Use Functions @ref HAL_SD_RegisterCallback() to register a user callback,
+ it allows to register following callbacks:
+ (+) TxCpltCallback : callback when a transmission transfer is completed.
+ (+) RxCpltCallback : callback when a reception transfer is completed.
+ (+) ErrorCallback : callback when error occurs.
+ (+) AbortCpltCallback : callback when abort is completed.
+ (+) MspInitCallback : SD MspInit.
+ (+) MspDeInitCallback : SD MspDeInit.
+ This function takes as parameters the HAL peripheral handle, the Callback ID
+ and a pointer to the user callback function.
+
+ Use function @ref HAL_SD_UnRegisterCallback() to reset a callback to the default
+ weak (surcharged) function. It allows to reset following callbacks:
+ (+) TxCpltCallback : callback when a transmission transfer is completed.
+ (+) RxCpltCallback : callback when a reception transfer is completed.
+ (+) ErrorCallback : callback when error occurs.
+ (+) AbortCpltCallback : callback when abort is completed.
+ (+) MspInitCallback : SD MspInit.
+ (+) MspDeInitCallback : SD MspDeInit.
+ This function) takes as parameters the HAL peripheral handle and the Callback ID.
+
+ By default, after the @ref HAL_SD_Init and if the state is HAL_SD_STATE_RESET
+ all callbacks are reset to the corresponding legacy weak (surcharged) functions.
+ Exception done for MspInit and MspDeInit callbacks that are respectively
+ reset to the legacy weak (surcharged) functions in the @ref HAL_SD_Init
+ and @ref HAL_SD_DeInit only when these callbacks are null (not registered beforehand).
+ If not, MspInit or MspDeInit are not null, the @ref HAL_SD_Init and @ref HAL_SD_DeInit
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
+
+ Callbacks can be registered/unregistered in READY state only.
+ Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered
+ in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used
+ during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using @ref HAL_SD_RegisterCallback before calling @ref HAL_SD_DeInit
+ or @ref HAL_SD_Init function.
+
+ When The compilation define USE_HAL_SD_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registering feature is not available
+ and weak (surcharged) callbacks are used.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+#if defined(SDIO)
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SD
+ * @{
+ */
+
+#ifdef HAL_SD_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup SD_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SD_Private_Functions SD Private Functions
+ * @{
+ */
+static uint32_t SD_InitCard(SD_HandleTypeDef *hsd);
+static uint32_t SD_PowerON(SD_HandleTypeDef *hsd);
+static uint32_t SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
+static uint32_t SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus);
+static uint32_t SD_WideBus_Enable(SD_HandleTypeDef *hsd);
+static uint32_t SD_WideBus_Disable(SD_HandleTypeDef *hsd);
+static uint32_t SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR);
+static void SD_PowerOFF(SD_HandleTypeDef *hsd);
+static void SD_Write_IT(SD_HandleTypeDef *hsd);
+static void SD_Read_IT(SD_HandleTypeDef *hsd);
+static void SD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMAError(DMA_HandleTypeDef *hdma);
+static void SD_DMATxAbort(DMA_HandleTypeDef *hdma);
+static void SD_DMARxAbort(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SD_Exported_Functions_Group1
+ * @brief Initialization and de-initialization functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de-initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to initialize/de-initialize the SD
+ card device to be ready for use.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the SD according to the specified parameters in the
+ SD_HandleTypeDef and create the associated handle.
+ * @param hsd: Pointer to the SD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd)
+{
+ /* Check the SD handle allocation */
+ if(hsd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_ALL_INSTANCE(hsd->Instance));
+ assert_param(IS_SDIO_CLOCK_EDGE(hsd->Init.ClockEdge));
+ assert_param(IS_SDIO_CLOCK_BYPASS(hsd->Init.ClockBypass));
+ assert_param(IS_SDIO_CLOCK_POWER_SAVE(hsd->Init.ClockPowerSave));
+ assert_param(IS_SDIO_BUS_WIDE(hsd->Init.BusWide));
+ assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(hsd->Init.HardwareFlowControl));
+ assert_param(IS_SDIO_CLKDIV(hsd->Init.ClockDiv));
+
+ if(hsd->State == HAL_SD_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hsd->Lock = HAL_UNLOCKED;
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ /* Reset Callback pointers in HAL_SD_STATE_RESET only */
+ hsd->TxCpltCallback = HAL_SD_TxCpltCallback;
+ hsd->RxCpltCallback = HAL_SD_RxCpltCallback;
+ hsd->ErrorCallback = HAL_SD_ErrorCallback;
+ hsd->AbortCpltCallback = HAL_SD_AbortCallback;
+
+ if(hsd->MspInitCallback == NULL)
+ {
+ hsd->MspInitCallback = HAL_SD_MspInit;
+ }
+
+ /* Init the low level hardware */
+ hsd->MspInitCallback(hsd);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+ HAL_SD_MspInit(hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+ }
+
+ hsd->State = HAL_SD_STATE_BUSY;
+
+ /* Initialize the Card parameters */
+ if (HAL_SD_InitCard(hsd) != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Initialize the error code */
+ hsd->ErrorCode = HAL_SD_ERROR_NONE;
+
+ /* Initialize the SD operation */
+ hsd->Context = SD_CONTEXT_NONE;
+
+ /* Initialize the SD state */
+ hsd->State = HAL_SD_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the SD Card.
+ * @param hsd: Pointer to SD handle
+ * @note This function initializes the SD card. It could be used when a card
+ re-initialization is needed.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd)
+{
+ uint32_t errorstate;
+ HAL_StatusTypeDef status;
+ SD_InitTypeDef Init;
+
+ /* Default SDIO peripheral configuration for SD card initialization */
+ Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
+ Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
+ Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
+ Init.BusWide = SDIO_BUS_WIDE_1B;
+ Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
+ Init.ClockDiv = SDIO_INIT_CLK_DIV;
+
+ /* Initialize SDIO peripheral interface with default configuration */
+ status = SDIO_Init(hsd->Instance, Init);
+ if(status != HAL_OK)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Disable SDIO Clock */
+ __HAL_SD_DISABLE(hsd);
+
+ /* Set Power State to ON */
+ (void)SDIO_PowerState_ON(hsd->Instance);
+
+ /* Enable SDIO Clock */
+ __HAL_SD_ENABLE(hsd);
+
+ /* Identify card operating voltage */
+ errorstate = SD_PowerON(hsd);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->ErrorCode |= errorstate;
+ return HAL_ERROR;
+ }
+
+ /* Card initialization */
+ errorstate = SD_InitCard(hsd);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->ErrorCode |= errorstate;
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De-Initializes the SD card.
+ * @param hsd: Pointer to SD handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd)
+{
+ /* Check the SD handle allocation */
+ if(hsd == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_ALL_INSTANCE(hsd->Instance));
+
+ hsd->State = HAL_SD_STATE_BUSY;
+
+ /* Set SD power state to off */
+ SD_PowerOFF(hsd);
+
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ if(hsd->MspDeInitCallback == NULL)
+ {
+ hsd->MspDeInitCallback = HAL_SD_MspDeInit;
+ }
+
+ /* DeInit the low level hardware */
+ hsd->MspDeInitCallback(hsd);
+#else
+ /* De-Initialize the MSP layer */
+ HAL_SD_MspDeInit(hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+
+ hsd->ErrorCode = HAL_SD_ERROR_NONE;
+ hsd->State = HAL_SD_STATE_RESET;
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Initializes the SD MSP.
+ * @param hsd: Pointer to SD handle
+ * @retval None
+ */
+__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SD_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-Initialize SD MSP.
+ * @param hsd: Pointer to SD handle
+ * @retval None
+ */
+__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SD_MspDeInit could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group2
+ * @brief Data transfer functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the data
+ transfer from/to SD card.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed by polling mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_SD_GetCardState().
+ * @param hsd: Pointer to SD handle
+ * @param pData: pointer to the buffer that will contain the received data
+ * @param BlockAdd: Block Address from where data is to be read
+ * @param NumberOfBlocks: Number of SD blocks to read
+ * @param Timeout: Specify timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t count, data, dataremaining;
+ uint32_t add = BlockAdd;
+ uint8_t *tempbuff = pData;
+
+ if(NULL == pData)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hsd->State == HAL_SD_STATE_READY)
+ {
+ hsd->ErrorCode = HAL_SD_ERROR_NONE;
+
+ if((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr))
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hsd->State = HAL_SD_STATE_BUSY;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ if(hsd->SdCard.CardType != CARD_SDHC_SDXC)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = NumberOfBlocks * BLOCKSIZE;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hsd->Instance, &config);
+
+ /* Read block(s) in polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hsd->Context = SD_CONTEXT_READ_MULTIPLE_BLOCK;
+
+ /* Read Multi Block command */
+ errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add);
+ }
+ else
+ {
+ hsd->Context = SD_CONTEXT_READ_SINGLE_BLOCK;
+
+ /* Read Single Block command */
+ errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, add);
+ }
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+
+ /* Poll on SDIO flags */
+ dataremaining = config.DataLength;
+ while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+ {
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF) && (dataremaining > 0U))
+ {
+ /* Read data from SDIO Rx FIFO */
+ for(count = 0U; count < 8U; count++)
+ {
+ data = SDIO_ReadFIFO(hsd->Instance);
+ *tempbuff = (uint8_t)(data & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 8U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 16U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 24U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ }
+ }
+
+ if(((HAL_GetTick()-tickstart) >= Timeout) || (Timeout == 0U))
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_TIMEOUT;
+ hsd->State= HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send stop transmission command in case of multiblock read */
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U))
+ {
+ if(hsd->SdCard.CardType != CARD_SECURED)
+ {
+ /* Send stop transmission command */
+ errorstate = SDMMC_CmdStopTransfer(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Get error state */
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_RX_OVERRUN;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+
+ /* Empty FIFO if there is still any data */
+ while ((__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (dataremaining > 0U))
+ {
+ data = SDIO_ReadFIFO(hsd->Instance);
+ *tempbuff = (uint8_t)(data & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 8U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 16U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+ *tempbuff = (uint8_t)((data >> 24U) & 0xFFU);
+ tempbuff++;
+ dataremaining--;
+
+ if(((HAL_GetTick()-tickstart) >= Timeout) || (Timeout == 0U))
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_TIMEOUT;
+ hsd->State= HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS);
+
+ hsd->State = HAL_SD_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_BUSY;
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Allows to write block(s) to a specified address in a card. The Data
+ * transfer is managed by polling mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_SD_GetCardState().
+ * @param hsd: Pointer to SD handle
+ * @param pData: pointer to the buffer that will contain the data to transmit
+ * @param BlockAdd: Block Address where data will be written
+ * @param NumberOfBlocks: Number of SD blocks to write
+ * @param Timeout: Specify timeout value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t count, data, dataremaining;
+ uint32_t add = BlockAdd;
+ uint8_t *tempbuff = pData;
+
+ if(NULL == pData)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hsd->State == HAL_SD_STATE_READY)
+ {
+ hsd->ErrorCode = HAL_SD_ERROR_NONE;
+
+ if((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr))
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hsd->State = HAL_SD_STATE_BUSY;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ if(hsd->SdCard.CardType != CARD_SDHC_SDXC)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = NumberOfBlocks * BLOCKSIZE;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hsd->Instance, &config);
+
+ /* Write Blocks in Polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hsd->Context = SD_CONTEXT_WRITE_MULTIPLE_BLOCK;
+
+ /* Write Multi Block command */
+ errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add);
+ }
+ else
+ {
+ hsd->Context = SD_CONTEXT_WRITE_SINGLE_BLOCK;
+
+ /* Write Single Block command */
+ errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, add);
+ }
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+
+ /* Write block(s) in polling mode */
+ dataremaining = config.DataLength;
+ while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
+ {
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE) && (dataremaining > 0U))
+ {
+ /* Write data to SDIO Tx FIFO */
+ for(count = 0U; count < 8U; count++)
+ {
+ data = (uint32_t)(*tempbuff);
+ tempbuff++;
+ dataremaining--;
+ data |= ((uint32_t)(*tempbuff) << 8U);
+ tempbuff++;
+ dataremaining--;
+ data |= ((uint32_t)(*tempbuff) << 16U);
+ tempbuff++;
+ dataremaining--;
+ data |= ((uint32_t)(*tempbuff) << 24U);
+ tempbuff++;
+ dataremaining--;
+ (void)SDIO_WriteFIFO(hsd->Instance, &data);
+ }
+ }
+
+ if(((HAL_GetTick()-tickstart) >= Timeout) || (Timeout == 0U))
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Send stop transmission command in case of multiblock write */
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1U))
+ {
+ if(hsd->SdCard.CardType != CARD_SECURED)
+ {
+ /* Send stop transmission command */
+ errorstate = SDMMC_CmdStopTransfer(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Get error state */
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR))
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_TX_UNDERRUN;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS);
+
+ hsd->State = HAL_SD_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_BUSY;
+ return HAL_ERROR;
+ }
+}
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed in interrupt mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_SD_GetCardState().
+ * @note You could also check the IT transfer process through the SD Rx
+ * interrupt event.
+ * @param hsd: Pointer to SD handle
+ * @param pData: Pointer to the buffer that will contain the received data
+ * @param BlockAdd: Block Address from where data is to be read
+ * @param NumberOfBlocks: Number of blocks to read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t add = BlockAdd;
+
+ if(NULL == pData)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hsd->State == HAL_SD_STATE_READY)
+ {
+ hsd->ErrorCode = HAL_SD_ERROR_NONE;
+
+ if((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr))
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hsd->State = HAL_SD_STATE_BUSY;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ hsd->pRxBuffPtr = pData;
+ hsd->RxXferSize = BLOCKSIZE * NumberOfBlocks;
+
+ __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_FLAG_RXFIFOHF | SDIO_IT_STBITERR));
+
+ if(hsd->SdCard.CardType != CARD_SDHC_SDXC)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = BLOCKSIZE * NumberOfBlocks;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hsd->Instance, &config);
+
+ /* Read Blocks in IT mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hsd->Context = (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_IT);
+
+ /* Read Multi Block command */
+ errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add);
+ }
+ else
+ {
+ hsd->Context = (SD_CONTEXT_READ_SINGLE_BLOCK | SD_CONTEXT_IT);
+
+ /* Read Single Block command */
+ errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, add);
+ }
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Writes block(s) to a specified address in a card. The Data transfer
+ * is managed in interrupt mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_SD_GetCardState().
+ * @note You could also check the IT transfer process through the SD Tx
+ * interrupt event.
+ * @param hsd: Pointer to SD handle
+ * @param pData: Pointer to the buffer that will contain the data to transmit
+ * @param BlockAdd: Block Address where data will be written
+ * @param NumberOfBlocks: Number of blocks to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t add = BlockAdd;
+
+ if(NULL == pData)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hsd->State == HAL_SD_STATE_READY)
+ {
+ hsd->ErrorCode = HAL_SD_ERROR_NONE;
+
+ if((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr))
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hsd->State = HAL_SD_STATE_BUSY;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ hsd->pTxBuffPtr = pData;
+ hsd->TxXferSize = BLOCKSIZE * NumberOfBlocks;
+
+ /* Enable transfer interrupts */
+ __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_DATAEND | SDIO_FLAG_TXFIFOHE | SDIO_IT_STBITERR));
+
+ if(hsd->SdCard.CardType != CARD_SDHC_SDXC)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Write Blocks in Polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hsd->Context = (SD_CONTEXT_WRITE_MULTIPLE_BLOCK| SD_CONTEXT_IT);
+
+ /* Write Multi Block command */
+ errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add);
+ }
+ else
+ {
+ hsd->Context = (SD_CONTEXT_WRITE_SINGLE_BLOCK | SD_CONTEXT_IT);
+
+ /* Write Single Block command */
+ errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, add);
+ }
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = BLOCKSIZE * NumberOfBlocks;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hsd->Instance, &config);
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Reads block(s) from a specified address in a card. The Data transfer
+ * is managed by DMA mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_SD_GetCardState().
+ * @note You could also check the DMA transfer process through the SD Rx
+ * interrupt event.
+ * @param hsd: Pointer SD handle
+ * @param pData: Pointer to the buffer that will contain the received data
+ * @param BlockAdd: Block Address from where data is to be read
+ * @param NumberOfBlocks: Number of blocks to read.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t add = BlockAdd;
+
+ if(NULL == pData)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hsd->State == HAL_SD_STATE_READY)
+ {
+ hsd->ErrorCode = HAL_SD_ERROR_NONE;
+
+ if((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr))
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hsd->State = HAL_SD_STATE_BUSY;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND | SDIO_IT_STBITERR));
+
+ /* Set the DMA transfer complete callback */
+ hsd->hdmarx->XferCpltCallback = SD_DMAReceiveCplt;
+
+ /* Set the DMA error callback */
+ hsd->hdmarx->XferErrorCallback = SD_DMAError;
+
+ /* Set the DMA Abort callback */
+ hsd->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA Channel */
+ if(HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pData, (uint32_t)(BLOCKSIZE * NumberOfBlocks)/4U) != HAL_OK)
+ {
+ __HAL_SD_DISABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_RXOVERR | SDIO_IT_DATAEND));
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_DMA;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Enable SD DMA transfer */
+ __HAL_SD_DMA_ENABLE(hsd);
+
+ if(hsd->SdCard.CardType != CARD_SDHC_SDXC)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = BLOCKSIZE * NumberOfBlocks;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hsd->Instance, &config);
+
+ /* Read Blocks in DMA mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hsd->Context = (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_DMA);
+
+ /* Read Multi Block command */
+ errorstate = SDMMC_CmdReadMultiBlock(hsd->Instance, add);
+ }
+ else
+ {
+ hsd->Context = (SD_CONTEXT_READ_SINGLE_BLOCK | SD_CONTEXT_DMA);
+
+ /* Read Single Block command */
+ errorstate = SDMMC_CmdReadSingleBlock(hsd->Instance, add);
+ }
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Writes block(s) to a specified address in a card. The Data transfer
+ * is managed by DMA mode.
+ * @note This API should be followed by a check on the card state through
+ * HAL_SD_GetCardState().
+ * @note You could also check the DMA transfer process through the SD Tx
+ * interrupt event.
+ * @param hsd: Pointer to SD handle
+ * @param pData: Pointer to the buffer that will contain the data to transmit
+ * @param BlockAdd: Block Address where data will be written
+ * @param NumberOfBlocks: Number of blocks to write
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t add = BlockAdd;
+
+ if(NULL == pData)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(hsd->State == HAL_SD_STATE_READY)
+ {
+ hsd->ErrorCode = HAL_SD_ERROR_NONE;
+
+ if((add + NumberOfBlocks) > (hsd->SdCard.LogBlockNbr))
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hsd->State = HAL_SD_STATE_BUSY;
+
+ /* Initialize data control register */
+ hsd->Instance->DCTRL = 0U;
+
+ /* Enable SD Error interrupts */
+ __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR));
+
+ /* Set the DMA transfer complete callback */
+ hsd->hdmatx->XferCpltCallback = SD_DMATransmitCplt;
+
+ /* Set the DMA error callback */
+ hsd->hdmatx->XferErrorCallback = SD_DMAError;
+
+ /* Set the DMA Abort callback */
+ hsd->hdmatx->XferAbortCallback = NULL;
+
+ if(hsd->SdCard.CardType != CARD_SDHC_SDXC)
+ {
+ add *= 512U;
+ }
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Write Blocks in Polling mode */
+ if(NumberOfBlocks > 1U)
+ {
+ hsd->Context = (SD_CONTEXT_WRITE_MULTIPLE_BLOCK | SD_CONTEXT_DMA);
+
+ /* Write Multi Block command */
+ errorstate = SDMMC_CmdWriteMultiBlock(hsd->Instance, add);
+ }
+ else
+ {
+ hsd->Context = (SD_CONTEXT_WRITE_SINGLE_BLOCK | SD_CONTEXT_DMA);
+
+ /* Write Single Block command */
+ errorstate = SDMMC_CmdWriteSingleBlock(hsd->Instance, add);
+ }
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+
+ /* Enable SDIO DMA transfer */
+ __HAL_SD_DMA_ENABLE(hsd);
+
+ /* Enable the DMA Channel */
+ if(HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pData, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BLOCKSIZE * NumberOfBlocks)/4U) != HAL_OK)
+ {
+ __HAL_SD_DISABLE_IT(hsd, (SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR));
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_DMA;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Configure the SD DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = BLOCKSIZE * NumberOfBlocks;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hsd->Instance, &config);
+
+ return HAL_OK;
+ }
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Erases the specified memory area of the given SD card.
+ * @note This API should be followed by a check on the card state through
+ * HAL_SD_GetCardState().
+ * @param hsd: Pointer to SD handle
+ * @param BlockStartAdd: Start Block address
+ * @param BlockEndAdd: End Block address
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd)
+{
+ uint32_t errorstate;
+ uint32_t start_add = BlockStartAdd;
+ uint32_t end_add = BlockEndAdd;
+
+ if(hsd->State == HAL_SD_STATE_READY)
+ {
+ hsd->ErrorCode = HAL_SD_ERROR_NONE;
+
+ if(end_add < start_add)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_PARAM;
+ return HAL_ERROR;
+ }
+
+ if(end_add > (hsd->SdCard.LogBlockNbr))
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_ADDR_OUT_OF_RANGE;
+ return HAL_ERROR;
+ }
+
+ hsd->State = HAL_SD_STATE_BUSY;
+
+ /* Check if the card command class supports erase command */
+ if(((hsd->SdCard.Class) & SDIO_CCCC_ERASE) == 0U)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_REQUEST_NOT_APPLICABLE;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ if((SDIO_GetResponse(hsd->Instance, SDIO_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_LOCK_UNLOCK_FAILED;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Get start and end block for high capacity cards */
+ if(hsd->SdCard.CardType != CARD_SDHC_SDXC)
+ {
+ start_add *= 512U;
+ end_add *= 512U;
+ }
+
+ /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */
+ if(hsd->SdCard.CardType != CARD_SECURED)
+ {
+ /* Send CMD32 SD_ERASE_GRP_START with argument as addr */
+ errorstate = SDMMC_CmdSDEraseStartAdd(hsd->Instance, start_add);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Send CMD33 SD_ERASE_GRP_END with argument as addr */
+ errorstate = SDMMC_CmdSDEraseEndAdd(hsd->Instance, end_add);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+ }
+
+ /* Send CMD38 ERASE */
+ errorstate = SDMMC_CmdErase(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ hsd->State = HAL_SD_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief This function handles SD card interrupt request.
+ * @param hsd: Pointer to SD handle
+ * @retval None
+ */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd)
+{
+ uint32_t errorstate;
+ uint32_t context = hsd->Context;
+
+ /* Check for SDIO interrupt flags */
+ if((__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF) != RESET) && ((context & SD_CONTEXT_IT) != 0U))
+ {
+ SD_Read_IT(hsd);
+ }
+
+ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DATAEND) != RESET)
+ {
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_DATAEND);
+
+ __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
+ SDIO_IT_TXUNDERR | SDIO_IT_RXOVERR | SDIO_IT_TXFIFOHE |\
+ SDIO_IT_RXFIFOHF | SDIO_IT_STBITERR);
+
+ hsd->Instance->DCTRL &= ~(SDIO_DCTRL_DTEN);
+
+ if((context & SD_CONTEXT_IT) != 0U)
+ {
+ if(((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U) || ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U))
+ {
+ errorstate = SDMMC_CmdStopTransfer(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ hsd->ErrorCode |= errorstate;
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ hsd->ErrorCallback(hsd);
+#else
+ HAL_SD_ErrorCallback(hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+ }
+ }
+
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS);
+
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ if(((context & SD_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U))
+ {
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ hsd->RxCpltCallback(hsd);
+#else
+ HAL_SD_RxCpltCallback(hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+ }
+ else
+ {
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ hsd->TxCpltCallback(hsd);
+#else
+ HAL_SD_TxCpltCallback(hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+ }
+ }
+ else if((context & SD_CONTEXT_DMA) != 0U)
+ {
+ if((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U)
+ {
+ errorstate = SDMMC_CmdStopTransfer(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ hsd->ErrorCode |= errorstate;
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ hsd->ErrorCallback(hsd);
+#else
+ HAL_SD_ErrorCallback(hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+ }
+ }
+ if(((context & SD_CONTEXT_READ_SINGLE_BLOCK) == 0U) && ((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) == 0U))
+ {
+ /* Disable the DMA transfer for transmit request by setting the DMAEN bit
+ in the SD DCTRL register */
+ hsd->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
+
+ hsd->State = HAL_SD_STATE_READY;
+
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ hsd->TxCpltCallback(hsd);
+#else
+ HAL_SD_TxCpltCallback(hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+ }
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+
+ else if((__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE) != RESET) && ((context & SD_CONTEXT_IT) != 0U))
+ {
+ SD_Write_IT(hsd);
+ }
+
+ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_RXOVERR | SDIO_FLAG_TXUNDERR | SDIO_FLAG_STBITERR) != RESET)
+ {
+ /* Set Error code */
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL) != RESET)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_DATA_CRC_FAIL;
+ }
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT) != RESET)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT;
+ }
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR) != RESET)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_RX_OVERRUN;
+ }
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR) != RESET)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_TX_UNDERRUN;
+ }
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_STBITERR) != RESET)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_DATA_TIMEOUT;
+ }
+
+ /* Clear All flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS | SDIO_FLAG_STBITERR);
+
+ /* Disable all interrupts */
+ __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
+ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR | SDIO_IT_STBITERR);
+
+ hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance);
+
+ if((context & SD_CONTEXT_IT) != 0U)
+ {
+ /* Set the SD state to ready to be able to start again the process */
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ hsd->ErrorCallback(hsd);
+#else
+ HAL_SD_ErrorCallback(hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+ }
+ else if((context & SD_CONTEXT_DMA) != 0U)
+ {
+ /* Abort the SD DMA channel */
+ if(((context & SD_CONTEXT_WRITE_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U))
+ {
+ /* Set the DMA Tx abort callback */
+ hsd->hdmatx->XferAbortCallback = SD_DMATxAbort;
+ /* Abort DMA in IT mode */
+ if(HAL_DMA_Abort_IT(hsd->hdmatx) != HAL_OK)
+ {
+ SD_DMATxAbort(hsd->hdmatx);
+ }
+ }
+ else if(((context & SD_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U))
+ {
+ /* Set the DMA Rx abort callback */
+ hsd->hdmarx->XferAbortCallback = SD_DMARxAbort;
+ /* Abort DMA in IT mode */
+ if(HAL_DMA_Abort_IT(hsd->hdmarx) != HAL_OK)
+ {
+ SD_DMARxAbort(hsd->hdmarx);
+ }
+ }
+ else
+ {
+ hsd->ErrorCode = HAL_SD_ERROR_NONE;
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ hsd->AbortCpltCallback(hsd);
+#else
+ HAL_SD_AbortCallback(hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+ }
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+}
+
+/**
+ * @brief return the SD state
+ * @param hsd: Pointer to sd handle
+ * @retval HAL state
+ */
+HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd)
+{
+ return hsd->State;
+}
+
+/**
+* @brief Return the SD error code
+* @param hsd : Pointer to a SD_HandleTypeDef structure that contains
+ * the configuration information.
+* @retval SD Error Code
+*/
+uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd)
+{
+ return hsd->ErrorCode;
+}
+
+/**
+ * @brief Tx Transfer completed callbacks
+ * @param hsd: Pointer to SD handle
+ * @retval None
+ */
+__weak void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SD_TxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callbacks
+ * @param hsd: Pointer SD handle
+ * @retval None
+ */
+__weak void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SD_RxCpltCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD error callbacks
+ * @param hsd: Pointer SD handle
+ * @retval None
+ */
+__weak void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SD_ErrorCallback can be implemented in the user file
+ */
+}
+
+/**
+ * @brief SD Abort callbacks
+ * @param hsd: Pointer SD handle
+ * @retval None
+ */
+__weak void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hsd);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SD_AbortCallback can be implemented in the user file
+ */
+}
+
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+/**
+ * @brief Register a User SD Callback
+ * To be used instead of the weak (surcharged) predefined callback
+ * @param hsd : SD handle
+ * @param CallbackID : ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_SD_TX_CPLT_CB_ID SD Tx Complete Callback ID
+ * @arg @ref HAL_SD_RX_CPLT_CB_ID SD Rx Complete Callback ID
+ * @arg @ref HAL_SD_ERROR_CB_ID SD Error Callback ID
+ * @arg @ref HAL_SD_ABORT_CB_ID SD Abort Callback ID
+ * @arg @ref HAL_SD_MSP_INIT_CB_ID SD MspInit Callback ID
+ * @arg @ref HAL_SD_MSP_DEINIT_CB_ID SD MspDeInit Callback ID
+ * @param pCallback : pointer to the Callback function
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_SD_RegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID, pSD_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if(pCallback == NULL)
+ {
+ /* Update the error code */
+ hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK;
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(hsd);
+
+ if(hsd->State == HAL_SD_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_SD_TX_CPLT_CB_ID :
+ hsd->TxCpltCallback = pCallback;
+ break;
+ case HAL_SD_RX_CPLT_CB_ID :
+ hsd->RxCpltCallback = pCallback;
+ break;
+ case HAL_SD_ERROR_CB_ID :
+ hsd->ErrorCallback = pCallback;
+ break;
+ case HAL_SD_ABORT_CB_ID :
+ hsd->AbortCpltCallback = pCallback;
+ break;
+ case HAL_SD_MSP_INIT_CB_ID :
+ hsd->MspInitCallback = pCallback;
+ break;
+ case HAL_SD_MSP_DEINIT_CB_ID :
+ hsd->MspDeInitCallback = pCallback;
+ break;
+ default :
+ /* Update the error code */
+ hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (hsd->State == HAL_SD_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_SD_MSP_INIT_CB_ID :
+ hsd->MspInitCallback = pCallback;
+ break;
+ case HAL_SD_MSP_DEINIT_CB_ID :
+ hsd->MspDeInitCallback = pCallback;
+ break;
+ default :
+ /* Update the error code */
+ hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsd);
+ return status;
+}
+
+/**
+ * @brief Unregister a User SD Callback
+ * SD Callback is redirected to the weak (surcharged) predefined callback
+ * @param hsd : SD handle
+ * @param CallbackID : ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg @ref HAL_SD_TX_CPLT_CB_ID SD Tx Complete Callback ID
+ * @arg @ref HAL_SD_RX_CPLT_CB_ID SD Rx Complete Callback ID
+ * @arg @ref HAL_SD_ERROR_CB_ID SD Error Callback ID
+ * @arg @ref HAL_SD_ABORT_CB_ID SD Abort Callback ID
+ * @arg @ref HAL_SD_MSP_INIT_CB_ID SD MspInit Callback ID
+ * @arg @ref HAL_SD_MSP_DEINIT_CB_ID SD MspDeInit Callback ID
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hsd);
+
+ if(hsd->State == HAL_SD_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_SD_TX_CPLT_CB_ID :
+ hsd->TxCpltCallback = HAL_SD_TxCpltCallback;
+ break;
+ case HAL_SD_RX_CPLT_CB_ID :
+ hsd->RxCpltCallback = HAL_SD_RxCpltCallback;
+ break;
+ case HAL_SD_ERROR_CB_ID :
+ hsd->ErrorCallback = HAL_SD_ErrorCallback;
+ break;
+ case HAL_SD_ABORT_CB_ID :
+ hsd->AbortCpltCallback = HAL_SD_AbortCallback;
+ break;
+ case HAL_SD_MSP_INIT_CB_ID :
+ hsd->MspInitCallback = HAL_SD_MspInit;
+ break;
+ case HAL_SD_MSP_DEINIT_CB_ID :
+ hsd->MspDeInitCallback = HAL_SD_MspDeInit;
+ break;
+ default :
+ /* Update the error code */
+ hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (hsd->State == HAL_SD_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_SD_MSP_INIT_CB_ID :
+ hsd->MspInitCallback = HAL_SD_MspInit;
+ break;
+ case HAL_SD_MSP_DEINIT_CB_ID :
+ hsd->MspDeInitCallback = HAL_SD_MspDeInit;
+ break;
+ default :
+ /* Update the error code */
+ hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hsd->ErrorCode |= HAL_SD_ERROR_INVALID_CALLBACK;
+ /* update return status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hsd);
+ return status;
+}
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @addtogroup SD_Exported_Functions_Group3
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Peripheral Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SD card
+ operations and get the related information
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Returns information the information of the card which are stored on
+ * the CID register.
+ * @param hsd: Pointer to SD handle
+ * @param pCID: Pointer to a HAL_SD_CardCIDTypeDef structure that
+ * contains all CID register parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypeDef *pCID)
+{
+ pCID->ManufacturerID = (uint8_t)((hsd->CID[0] & 0xFF000000U) >> 24U);
+
+ pCID->OEM_AppliID = (uint16_t)((hsd->CID[0] & 0x00FFFF00U) >> 8U);
+
+ pCID->ProdName1 = (((hsd->CID[0] & 0x000000FFU) << 24U) | ((hsd->CID[1] & 0xFFFFFF00U) >> 8U));
+
+ pCID->ProdName2 = (uint8_t)(hsd->CID[1] & 0x000000FFU);
+
+ pCID->ProdRev = (uint8_t)((hsd->CID[2] & 0xFF000000U) >> 24U);
+
+ pCID->ProdSN = (((hsd->CID[2] & 0x00FFFFFFU) << 8U) | ((hsd->CID[3] & 0xFF000000U) >> 24U));
+
+ pCID->Reserved1 = (uint8_t)((hsd->CID[3] & 0x00F00000U) >> 20U);
+
+ pCID->ManufactDate = (uint16_t)((hsd->CID[3] & 0x000FFF00U) >> 8U);
+
+ pCID->CID_CRC = (uint8_t)((hsd->CID[3] & 0x000000FEU) >> 1U);
+
+ pCID->Reserved2 = 1U;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Returns information the information of the card which are stored on
+ * the CSD register.
+ * @param hsd: Pointer to SD handle
+ * @param pCSD: Pointer to a HAL_SD_CardCSDTypeDef structure that
+ * contains all CSD register parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypeDef *pCSD)
+{
+ pCSD->CSDStruct = (uint8_t)((hsd->CSD[0] & 0xC0000000U) >> 30U);
+
+ pCSD->SysSpecVersion = (uint8_t)((hsd->CSD[0] & 0x3C000000U) >> 26U);
+
+ pCSD->Reserved1 = (uint8_t)((hsd->CSD[0] & 0x03000000U) >> 24U);
+
+ pCSD->TAAC = (uint8_t)((hsd->CSD[0] & 0x00FF0000U) >> 16U);
+
+ pCSD->NSAC = (uint8_t)((hsd->CSD[0] & 0x0000FF00U) >> 8U);
+
+ pCSD->MaxBusClkFrec = (uint8_t)(hsd->CSD[0] & 0x000000FFU);
+
+ pCSD->CardComdClasses = (uint16_t)((hsd->CSD[1] & 0xFFF00000U) >> 20U);
+
+ pCSD->RdBlockLen = (uint8_t)((hsd->CSD[1] & 0x000F0000U) >> 16U);
+
+ pCSD->PartBlockRead = (uint8_t)((hsd->CSD[1] & 0x00008000U) >> 15U);
+
+ pCSD->WrBlockMisalign = (uint8_t)((hsd->CSD[1] & 0x00004000U) >> 14U);
+
+ pCSD->RdBlockMisalign = (uint8_t)((hsd->CSD[1] & 0x00002000U) >> 13U);
+
+ pCSD->DSRImpl = (uint8_t)((hsd->CSD[1] & 0x00001000U) >> 12U);
+
+ pCSD->Reserved2 = 0U; /*!< Reserved */
+
+ if(hsd->SdCard.CardType == CARD_SDSC)
+ {
+ pCSD->DeviceSize = (((hsd->CSD[1] & 0x000003FFU) << 2U) | ((hsd->CSD[2] & 0xC0000000U) >> 30U));
+
+ pCSD->MaxRdCurrentVDDMin = (uint8_t)((hsd->CSD[2] & 0x38000000U) >> 27U);
+
+ pCSD->MaxRdCurrentVDDMax = (uint8_t)((hsd->CSD[2] & 0x07000000U) >> 24U);
+
+ pCSD->MaxWrCurrentVDDMin = (uint8_t)((hsd->CSD[2] & 0x00E00000U) >> 21U);
+
+ pCSD->MaxWrCurrentVDDMax = (uint8_t)((hsd->CSD[2] & 0x001C0000U) >> 18U);
+
+ pCSD->DeviceSizeMul = (uint8_t)((hsd->CSD[2] & 0x00038000U) >> 15U);
+
+ hsd->SdCard.BlockNbr = (pCSD->DeviceSize + 1U) ;
+ hsd->SdCard.BlockNbr *= (1UL << ((pCSD->DeviceSizeMul & 0x07U) + 2U));
+ hsd->SdCard.BlockSize = (1UL << (pCSD->RdBlockLen & 0x0FU));
+
+ hsd->SdCard.LogBlockNbr = (hsd->SdCard.BlockNbr) * ((hsd->SdCard.BlockSize) / 512U);
+ hsd->SdCard.LogBlockSize = 512U;
+ }
+ else if(hsd->SdCard.CardType == CARD_SDHC_SDXC)
+ {
+ /* Byte 7 */
+ pCSD->DeviceSize = (((hsd->CSD[1] & 0x0000003FU) << 16U) | ((hsd->CSD[2] & 0xFFFF0000U) >> 16U));
+
+ hsd->SdCard.BlockNbr = ((pCSD->DeviceSize + 1U) * 1024U);
+ hsd->SdCard.LogBlockNbr = hsd->SdCard.BlockNbr;
+ hsd->SdCard.BlockSize = 512U;
+ hsd->SdCard.LogBlockSize = hsd->SdCard.BlockSize;
+ }
+ else
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ pCSD->EraseGrSize = (uint8_t)((hsd->CSD[2] & 0x00004000U) >> 14U);
+
+ pCSD->EraseGrMul = (uint8_t)((hsd->CSD[2] & 0x00003F80U) >> 7U);
+
+ pCSD->WrProtectGrSize = (uint8_t)(hsd->CSD[2] & 0x0000007FU);
+
+ pCSD->WrProtectGrEnable = (uint8_t)((hsd->CSD[3] & 0x80000000U) >> 31U);
+
+ pCSD->ManDeflECC = (uint8_t)((hsd->CSD[3] & 0x60000000U) >> 29U);
+
+ pCSD->WrSpeedFact = (uint8_t)((hsd->CSD[3] & 0x1C000000U) >> 26U);
+
+ pCSD->MaxWrBlockLen= (uint8_t)((hsd->CSD[3] & 0x03C00000U) >> 22U);
+
+ pCSD->WriteBlockPaPartial = (uint8_t)((hsd->CSD[3] & 0x00200000U) >> 21U);
+
+ pCSD->Reserved3 = 0;
+
+ pCSD->ContentProtectAppli = (uint8_t)((hsd->CSD[3] & 0x00010000U) >> 16U);
+
+ pCSD->FileFormatGroup = (uint8_t)((hsd->CSD[3] & 0x00008000U) >> 15U);
+
+ pCSD->CopyFlag = (uint8_t)((hsd->CSD[3] & 0x00004000U) >> 14U);
+
+ pCSD->PermWrProtect = (uint8_t)((hsd->CSD[3] & 0x00002000U) >> 13U);
+
+ pCSD->TempWrProtect = (uint8_t)((hsd->CSD[3] & 0x00001000U) >> 12U);
+
+ pCSD->FileFormat = (uint8_t)((hsd->CSD[3] & 0x00000C00U) >> 10U);
+
+ pCSD->ECC= (uint8_t)((hsd->CSD[3] & 0x00000300U) >> 8U);
+
+ pCSD->CSD_CRC = (uint8_t)((hsd->CSD[3] & 0x000000FEU) >> 1U);
+
+ pCSD->Reserved4 = 1;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the SD status info.
+ * @param hsd: Pointer to SD handle
+ * @param pStatus: Pointer to the HAL_SD_CardStatusTypeDef structure that
+ * will contain the SD card status information
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypeDef *pStatus)
+{
+ uint32_t sd_status[16];
+ uint32_t errorstate;
+
+ errorstate = SD_SendSDStatus(hsd, sd_status);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+ else
+ {
+ pStatus->DataBusWidth = (uint8_t)((sd_status[0] & 0xC0U) >> 6U);
+
+ pStatus->SecuredMode = (uint8_t)((sd_status[0] & 0x20U) >> 5U);
+
+ pStatus->CardType = (uint16_t)(((sd_status[0] & 0x00FF0000U) >> 8U) | ((sd_status[0] & 0xFF000000U) >> 24U));
+
+ pStatus->ProtectedAreaSize = (((sd_status[1] & 0xFFU) << 24U) | ((sd_status[1] & 0xFF00U) << 8U) |
+ ((sd_status[1] & 0xFF0000U) >> 8U) | ((sd_status[1] & 0xFF000000U) >> 24U));
+
+ pStatus->SpeedClass = (uint8_t)(sd_status[2] & 0xFFU);
+
+ pStatus->PerformanceMove = (uint8_t)((sd_status[2] & 0xFF00U) >> 8U);
+
+ pStatus->AllocationUnitSize = (uint8_t)((sd_status[2] & 0xF00000U) >> 20U);
+
+ pStatus->EraseSize = (uint16_t)(((sd_status[2] & 0xFF000000U) >> 16U) | (sd_status[3] & 0xFFU));
+
+ pStatus->EraseTimeout = (uint8_t)((sd_status[3] & 0xFC00U) >> 10U);
+
+ pStatus->EraseOffset = (uint8_t)((sd_status[3] & 0x0300U) >> 8U);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the SD card info.
+ * @param hsd: Pointer to SD handle
+ * @param pCardInfo: Pointer to the HAL_SD_CardInfoTypeDef structure that
+ * will contain the SD card status information
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo)
+{
+ pCardInfo->CardType = (uint32_t)(hsd->SdCard.CardType);
+ pCardInfo->CardVersion = (uint32_t)(hsd->SdCard.CardVersion);
+ pCardInfo->Class = (uint32_t)(hsd->SdCard.Class);
+ pCardInfo->RelCardAdd = (uint32_t)(hsd->SdCard.RelCardAdd);
+ pCardInfo->BlockNbr = (uint32_t)(hsd->SdCard.BlockNbr);
+ pCardInfo->BlockSize = (uint32_t)(hsd->SdCard.BlockSize);
+ pCardInfo->LogBlockNbr = (uint32_t)(hsd->SdCard.LogBlockNbr);
+ pCardInfo->LogBlockSize = (uint32_t)(hsd->SdCard.LogBlockSize);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enables wide bus operation for the requested card if supported by
+ * card.
+ * @param hsd: Pointer to SD handle
+ * @param WideMode: Specifies the SD card wide bus mode
+ * This parameter can be one of the following values:
+ * @arg SDIO_BUS_WIDE_8B: 8-bit data transfer
+ * @arg SDIO_BUS_WIDE_4B: 4-bit data transfer
+ * @arg SDIO_BUS_WIDE_1B: 1-bit data transfer
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode)
+{
+ SDIO_InitTypeDef Init;
+ uint32_t errorstate;
+
+ /* Check the parameters */
+ assert_param(IS_SDIO_BUS_WIDE(WideMode));
+
+ /* Change State */
+ hsd->State = HAL_SD_STATE_BUSY;
+
+ if(hsd->SdCard.CardType != CARD_SECURED)
+ {
+ if(WideMode == SDIO_BUS_WIDE_8B)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE;
+ }
+ else if(WideMode == SDIO_BUS_WIDE_4B)
+ {
+ errorstate = SD_WideBus_Enable(hsd);
+
+ hsd->ErrorCode |= errorstate;
+ }
+ else if(WideMode == SDIO_BUS_WIDE_1B)
+ {
+ errorstate = SD_WideBus_Disable(hsd);
+
+ hsd->ErrorCode |= errorstate;
+ }
+ else
+ {
+ /* WideMode is not a valid argument*/
+ hsd->ErrorCode |= HAL_SD_ERROR_PARAM;
+ }
+ }
+ else
+ {
+ /* MMC Card does not support this feature */
+ hsd->ErrorCode |= HAL_SD_ERROR_UNSUPPORTED_FEATURE;
+ }
+
+ if(hsd->ErrorCode != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+ else
+ {
+ /* Configure the SDIO peripheral */
+ Init.ClockEdge = hsd->Init.ClockEdge;
+ Init.ClockBypass = hsd->Init.ClockBypass;
+ Init.ClockPowerSave = hsd->Init.ClockPowerSave;
+ Init.BusWide = WideMode;
+ Init.HardwareFlowControl = hsd->Init.HardwareFlowControl;
+ Init.ClockDiv = hsd->Init.ClockDiv;
+ (void)SDIO_Init(hsd->Instance, Init);
+ }
+
+ /* Change State */
+ hsd->State = HAL_SD_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Gets the current sd card data state.
+ * @param hsd: pointer to SD handle
+ * @retval Card state
+ */
+HAL_SD_CardStateTypeDef HAL_SD_GetCardState(SD_HandleTypeDef *hsd)
+{
+ uint32_t cardstate;
+ uint32_t errorstate;
+ uint32_t resp1 = 0;
+
+ errorstate = SD_SendStatus(hsd, &resp1);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ hsd->ErrorCode |= errorstate;
+ }
+
+ cardstate = ((resp1 >> 9U) & 0x0FU);
+
+ return (HAL_SD_CardStateTypeDef)cardstate;
+}
+
+/**
+ * @brief Abort the current transfer and disable the SD.
+ * @param hsd: pointer to a SD_HandleTypeDef structure that contains
+ * the configuration information for SD module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_CardStateTypeDef CardState;
+ uint32_t context = hsd->Context;
+
+ /* DIsable All interrupts */
+ __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
+ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR);
+
+ /* Clear All flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS);
+
+ CLEAR_BIT(hsd->Instance->DCTRL, SDIO_DCTRL_DTEN);
+
+ if ((context & SD_CONTEXT_DMA) != 0U)
+ {
+ /* Disable the SD DMA request */
+ hsd->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
+
+ /* Abort the SD DMA Tx channel */
+ if (((context & SD_CONTEXT_WRITE_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U))
+ {
+ if(HAL_DMA_Abort(hsd->hdmatx) != HAL_OK)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_DMA;
+ }
+ }
+ /* Abort the SD DMA Rx channel */
+ else if (((context & SD_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U))
+ {
+ if(HAL_DMA_Abort(hsd->hdmarx) != HAL_OK)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_DMA;
+ }
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+
+ hsd->State = HAL_SD_STATE_READY;
+
+ /* Initialize the SD operation */
+ hsd->Context = SD_CONTEXT_NONE;
+
+ CardState = HAL_SD_GetCardState(hsd);
+ if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING))
+ {
+ hsd->ErrorCode = SDMMC_CmdStopTransfer(hsd->Instance);
+ }
+ if(hsd->ErrorCode != HAL_SD_ERROR_NONE)
+ {
+ return HAL_ERROR;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Abort the current transfer and disable the SD (IT mode).
+ * @param hsd: pointer to a SD_HandleTypeDef structure that contains
+ * the configuration information for SD module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_CardStateTypeDef CardState;
+ uint32_t context = hsd->Context;
+
+ /* Disable All interrupts */
+ __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
+ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR);
+
+ CLEAR_BIT(hsd->Instance->DCTRL, SDIO_DCTRL_DTEN);
+
+ if ((context & SD_CONTEXT_DMA) != 0U)
+ {
+ /* Disable the SD DMA request */
+ hsd->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
+
+ /* Abort the SD DMA Tx channel */
+ if (((context & SD_CONTEXT_WRITE_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_WRITE_MULTIPLE_BLOCK) != 0U))
+ {
+ hsd->hdmatx->XferAbortCallback = SD_DMATxAbort;
+ if(HAL_DMA_Abort_IT(hsd->hdmatx) != HAL_OK)
+ {
+ hsd->hdmatx = NULL;
+ }
+ }
+ /* Abort the SD DMA Rx channel */
+ else if (((context & SD_CONTEXT_READ_SINGLE_BLOCK) != 0U) || ((context & SD_CONTEXT_READ_MULTIPLE_BLOCK) != 0U))
+ {
+ hsd->hdmarx->XferAbortCallback = SD_DMARxAbort;
+ if(HAL_DMA_Abort_IT(hsd->hdmarx) != HAL_OK)
+ {
+ hsd->hdmarx = NULL;
+ }
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+ /* No transfer ongoing on both DMA channels*/
+ else
+ {
+ /* Clear All flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS);
+
+ CardState = HAL_SD_GetCardState(hsd);
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING))
+ {
+ hsd->ErrorCode = SDMMC_CmdStopTransfer(hsd->Instance);
+ }
+ if(hsd->ErrorCode != HAL_SD_ERROR_NONE)
+ {
+ return HAL_ERROR;
+ }
+ else
+ {
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ hsd->AbortCpltCallback(hsd);
+#else
+ HAL_SD_AbortCallback(hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private function ----------------------------------------------------------*/
+/** @addtogroup SD_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief DMA SD transmit process complete callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void SD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent);
+
+ /* Enable DATAEND Interrupt */
+ __HAL_SD_ENABLE_IT(hsd, (SDIO_IT_DATAEND));
+}
+
+/**
+ * @brief DMA SD receive process complete callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void SD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent);
+ uint32_t errorstate;
+
+ /* Send stop command in multiblock write */
+ if(hsd->Context == (SD_CONTEXT_READ_MULTIPLE_BLOCK | SD_CONTEXT_DMA))
+ {
+ errorstate = SDMMC_CmdStopTransfer(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ hsd->ErrorCode |= errorstate;
+#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
+ hsd->ErrorCallback(hsd);
+#else
+ HAL_SD_ErrorCallback(hsd);
+#endif
+ }
+ }
+
+ /* Disable the DMA transfer for transmit request by setting the DMAEN bit
+ in the SD DCTRL register */
+ hsd->Instance->DCTRL &= (uint32_t)~((uint32_t)SDIO_DCTRL_DMAEN);
+
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS);
+
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+
+#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
+ hsd->RxCpltCallback(hsd);
+#else
+ HAL_SD_RxCpltCallback(hsd);
+#endif
+}
+
+/**
+ * @brief DMA SD communication error callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void SD_DMAError(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent);
+ HAL_SD_CardStateTypeDef CardState;
+ uint32_t RxErrorCode, TxErrorCode;
+
+ RxErrorCode = hsd->hdmarx->ErrorCode;
+ TxErrorCode = hsd->hdmatx->ErrorCode;
+ if((RxErrorCode == HAL_DMA_ERROR_TE) || (TxErrorCode == HAL_DMA_ERROR_TE))
+ {
+ /* Clear All flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+
+ /* Disable All interrupts */
+ __HAL_SD_DISABLE_IT(hsd, SDIO_IT_DATAEND | SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT|\
+ SDIO_IT_TXUNDERR| SDIO_IT_RXOVERR);
+
+ hsd->ErrorCode |= HAL_SD_ERROR_DMA;
+ CardState = HAL_SD_GetCardState(hsd);
+ if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING))
+ {
+ hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance);
+ }
+
+ hsd->State= HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ }
+
+#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
+ hsd->ErrorCallback(hsd);
+#else
+ HAL_SD_ErrorCallback(hsd);
+#endif
+}
+
+/**
+ * @brief DMA SD Tx Abort callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void SD_DMATxAbort(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent);
+ HAL_SD_CardStateTypeDef CardState;
+
+ /* Clear All flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS);
+
+ CardState = HAL_SD_GetCardState(hsd);
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING))
+ {
+ hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance);
+ }
+
+ if(hsd->ErrorCode == HAL_SD_ERROR_NONE)
+ {
+#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
+ hsd->AbortCpltCallback(hsd);
+#else
+ HAL_SD_AbortCallback(hsd);
+#endif
+ }
+ else
+ {
+#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
+ hsd->ErrorCallback(hsd);
+#else
+ HAL_SD_ErrorCallback(hsd);
+#endif
+ }
+}
+
+/**
+ * @brief DMA SD Rx Abort callback
+ * @param hdma: DMA handle
+ * @retval None
+ */
+static void SD_DMARxAbort(DMA_HandleTypeDef *hdma)
+{
+ SD_HandleTypeDef* hsd = (SD_HandleTypeDef* )(hdma->Parent);
+ HAL_SD_CardStateTypeDef CardState;
+
+ /* Clear All flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS);
+
+ CardState = HAL_SD_GetCardState(hsd);
+ hsd->State = HAL_SD_STATE_READY;
+ hsd->Context = SD_CONTEXT_NONE;
+ if((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING))
+ {
+ hsd->ErrorCode |= SDMMC_CmdStopTransfer(hsd->Instance);
+ }
+
+ if(hsd->ErrorCode == HAL_SD_ERROR_NONE)
+ {
+#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
+ hsd->AbortCpltCallback(hsd);
+#else
+ HAL_SD_AbortCallback(hsd);
+#endif
+ }
+ else
+ {
+#if (USE_HAL_SD_REGISTER_CALLBACKS == 1)
+ hsd->ErrorCallback(hsd);
+#else
+ HAL_SD_ErrorCallback(hsd);
+#endif
+ }
+}
+
+/**
+ * @brief Initializes the sd card.
+ * @param hsd: Pointer to SD handle
+ * @retval SD Card error state
+ */
+static uint32_t SD_InitCard(SD_HandleTypeDef *hsd)
+{
+ HAL_SD_CardCSDTypeDef CSD;
+ uint32_t errorstate;
+ uint16_t sd_rca = 1U;
+
+ /* Check the power State */
+ if(SDIO_GetPowerState(hsd->Instance) == 0U)
+ {
+ /* Power off */
+ return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE;
+ }
+
+ if(hsd->SdCard.CardType != CARD_SECURED)
+ {
+ /* Send CMD2 ALL_SEND_CID */
+ errorstate = SDMMC_CmdSendCID(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+ else
+ {
+ /* Get Card identification number data */
+ hsd->CID[0U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP1);
+ hsd->CID[1U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP2);
+ hsd->CID[2U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP3);
+ hsd->CID[3U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP4);
+ }
+ }
+
+ if(hsd->SdCard.CardType != CARD_SECURED)
+ {
+ /* Send CMD3 SET_REL_ADDR with argument 0 */
+ /* SD Card publishes its RCA. */
+ errorstate = SDMMC_CmdSetRelAdd(hsd->Instance, &sd_rca);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+ }
+ if(hsd->SdCard.CardType != CARD_SECURED)
+ {
+ /* Get the SD card RCA */
+ hsd->SdCard.RelCardAdd = sd_rca;
+
+ /* Send CMD9 SEND_CSD with argument as card's RCA */
+ errorstate = SDMMC_CmdSendCSD(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U));
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+ else
+ {
+ /* Get Card Specific Data */
+ hsd->CSD[0U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP1);
+ hsd->CSD[1U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP2);
+ hsd->CSD[2U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP3);
+ hsd->CSD[3U] = SDIO_GetResponse(hsd->Instance, SDIO_RESP4);
+ }
+ }
+
+ /* Get the Card Class */
+ hsd->SdCard.Class = (SDIO_GetResponse(hsd->Instance, SDIO_RESP2) >> 20U);
+
+ /* Get CSD parameters */
+ if (HAL_SD_GetCardCSD(hsd, &CSD) != HAL_OK)
+ {
+ return HAL_SD_ERROR_UNSUPPORTED_FEATURE;
+ }
+
+ /* Select the Card */
+ errorstate = SDMMC_CmdSelDesel(hsd->Instance, (uint32_t)(((uint32_t)hsd->SdCard.RelCardAdd) << 16U));
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* Configure SDIO peripheral interface */
+ (void)SDIO_Init(hsd->Instance, hsd->Init);
+
+ /* All cards are initialized */
+ return HAL_SD_ERROR_NONE;
+}
+
+/**
+ * @brief Enquires cards about their operating voltage and configures clock
+ * controls and stores SD information that will be needed in future
+ * in the SD handle.
+ * @param hsd: Pointer to SD handle
+ * @retval error state
+ */
+static uint32_t SD_PowerON(SD_HandleTypeDef *hsd)
+{
+ __IO uint32_t count = 0U;
+ uint32_t response = 0U, validvoltage = 0U;
+ uint32_t errorstate;
+
+ /* CMD0: GO_IDLE_STATE */
+ errorstate = SDMMC_CmdGoIdleState(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* CMD8: SEND_IF_COND: Command available only on V2.0 cards */
+ errorstate = SDMMC_CmdOperCond(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ hsd->SdCard.CardVersion = CARD_V1_X;
+ /* CMD0: GO_IDLE_STATE */
+ errorstate = SDMMC_CmdGoIdleState(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ }
+ else
+ {
+ hsd->SdCard.CardVersion = CARD_V2_X;
+ }
+
+ if( hsd->SdCard.CardVersion == CARD_V2_X)
+ {
+ /* SEND CMD55 APP_CMD with RCA as 0 */
+ errorstate = SDMMC_CmdAppCommand(hsd->Instance, 0);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return HAL_SD_ERROR_UNSUPPORTED_FEATURE;
+ }
+ }
+ /* SD CARD */
+ /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */
+ while((count < SDMMC_MAX_VOLT_TRIAL) && (validvoltage == 0U))
+ {
+ /* SEND CMD55 APP_CMD with RCA as 0 */
+ errorstate = SDMMC_CmdAppCommand(hsd->Instance, 0);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD41 */
+ errorstate = SDMMC_CmdAppOperCommand(hsd->Instance, SDMMC_VOLTAGE_WINDOW_SD | SDMMC_HIGH_CAPACITY | SD_SWITCH_1_8V_CAPACITY);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return HAL_SD_ERROR_UNSUPPORTED_FEATURE;
+ }
+
+ /* Get command response */
+ response = SDIO_GetResponse(hsd->Instance, SDIO_RESP1);
+
+ /* Get operating voltage*/
+ validvoltage = (((response >> 31U) == 1U) ? 1U : 0U);
+
+ count++;
+ }
+
+ if(count >= SDMMC_MAX_VOLT_TRIAL)
+ {
+ return HAL_SD_ERROR_INVALID_VOLTRANGE;
+ }
+
+ if((response & SDMMC_HIGH_CAPACITY) == SDMMC_HIGH_CAPACITY) /* (response &= SD_HIGH_CAPACITY) */
+ {
+ hsd->SdCard.CardType = CARD_SDHC_SDXC;
+ }
+ else
+ {
+ hsd->SdCard.CardType = CARD_SDSC;
+ }
+
+
+ return HAL_SD_ERROR_NONE;
+}
+
+/**
+ * @brief Turns the SDIO output signals off.
+ * @param hsd: Pointer to SD handle
+ * @retval None
+ */
+static void SD_PowerOFF(SD_HandleTypeDef *hsd)
+{
+ /* Set Power State to OFF */
+ (void)SDIO_PowerState_OFF(hsd->Instance);
+}
+
+/**
+ * @brief Send Status info command.
+ * @param hsd: pointer to SD handle
+ * @param pSDstatus: Pointer to the buffer that will contain the SD card status
+ * SD Status register)
+ * @retval error state
+ */
+static uint32_t SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t count;
+ uint32_t *pData = pSDstatus;
+
+ /* Check SD response */
+ if((SDIO_GetResponse(hsd->Instance, SDIO_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED)
+ {
+ return HAL_SD_ERROR_LOCK_UNLOCK_FAILED;
+ }
+
+ /* Set block size for card if it is not equal to current block size for card */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, 64U);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_NONE;
+ return errorstate;
+ }
+
+ /* Send CMD55 */
+ errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U));
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_NONE;
+ return errorstate;
+ }
+
+ /* Configure the SD DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = 64U;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_64B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hsd->Instance, &config);
+
+ /* Send ACMD13 (SD_APP_STAUS) with argument as card's RCA */
+ errorstate = SDMMC_CmdStatusRegister(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ hsd->ErrorCode |= HAL_SD_ERROR_NONE;
+ return errorstate;
+ }
+
+ /* Get status data */
+ while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+ {
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
+ {
+ for(count = 0U; count < 8U; count++)
+ {
+ *pData = SDIO_ReadFIFO(hsd->Instance);
+ pData++;
+ }
+ }
+
+ if((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT)
+ {
+ return HAL_SD_ERROR_TIMEOUT;
+ }
+ }
+
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ return HAL_SD_ERROR_DATA_TIMEOUT;
+ }
+ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ return HAL_SD_ERROR_DATA_CRC_FAIL;
+ }
+ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ return HAL_SD_ERROR_RX_OVERRUN;
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+
+ while ((__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)))
+ {
+ *pData = SDIO_ReadFIFO(hsd->Instance);
+ pData++;
+
+ if((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT)
+ {
+ return HAL_SD_ERROR_TIMEOUT;
+ }
+ }
+
+ /* Clear all the static status flags*/
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS);
+
+ return HAL_SD_ERROR_NONE;
+}
+
+/**
+ * @brief Returns the current card's status.
+ * @param hsd: Pointer to SD handle
+ * @param pCardStatus: pointer to the buffer that will contain the SD card
+ * status (Card Status register)
+ * @retval error state
+ */
+static uint32_t SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus)
+{
+ uint32_t errorstate;
+
+ if(pCardStatus == NULL)
+ {
+ return HAL_SD_ERROR_PARAM;
+ }
+
+ /* Send Status command */
+ errorstate = SDMMC_CmdSendStatus(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U));
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* Get SD card status */
+ *pCardStatus = SDIO_GetResponse(hsd->Instance, SDIO_RESP1);
+
+ return HAL_SD_ERROR_NONE;
+}
+
+/**
+ * @brief Enables the SDIO wide bus mode.
+ * @param hsd: pointer to SD handle
+ * @retval error state
+ */
+static uint32_t SD_WideBus_Enable(SD_HandleTypeDef *hsd)
+{
+ uint32_t scr[2U] = {0U, 0U};
+ uint32_t errorstate;
+
+ if((SDIO_GetResponse(hsd->Instance, SDIO_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED)
+ {
+ return HAL_SD_ERROR_LOCK_UNLOCK_FAILED;
+ }
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, scr);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* If requested card supports wide bus operation */
+ if((scr[1U] & SDMMC_WIDE_BUS_SUPPORT) != SDMMC_ALLZERO)
+ {
+ /* Send CMD55 APP_CMD with argument as card's RCA.*/
+ errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U));
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */
+ errorstate = SDMMC_CmdBusWidth(hsd->Instance, 2U);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ return HAL_SD_ERROR_NONE;
+ }
+ else
+ {
+ return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE;
+ }
+}
+
+/**
+ * @brief Disables the SDIO wide bus mode.
+ * @param hsd: Pointer to SD handle
+ * @retval error state
+ */
+static uint32_t SD_WideBus_Disable(SD_HandleTypeDef *hsd)
+{
+ uint32_t scr[2U] = {0U, 0U};
+ uint32_t errorstate;
+
+ if((SDIO_GetResponse(hsd->Instance, SDIO_RESP1) & SDMMC_CARD_LOCKED) == SDMMC_CARD_LOCKED)
+ {
+ return HAL_SD_ERROR_LOCK_UNLOCK_FAILED;
+ }
+
+ /* Get SCR Register */
+ errorstate = SD_FindSCR(hsd, scr);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* If requested card supports 1 bit mode operation */
+ if((scr[1U] & SDMMC_SINGLE_BUS_SUPPORT) != SDMMC_ALLZERO)
+ {
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)(hsd->SdCard.RelCardAdd << 16U));
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */
+ errorstate = SDMMC_CmdBusWidth(hsd->Instance, 0U);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ return HAL_SD_ERROR_NONE;
+ }
+ else
+ {
+ return HAL_SD_ERROR_REQUEST_NOT_APPLICABLE;
+ }
+}
+
+
+/**
+ * @brief Finds the SD card SCR register value.
+ * @param hsd: Pointer to SD handle
+ * @param pSCR: pointer to the buffer that will contain the SCR value
+ * @retval error state
+ */
+static uint32_t SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t index = 0U;
+ uint32_t tempscr[2U] = {0U, 0U};
+ uint32_t *scr = pSCR;
+
+ /* Set Block Size To 8 Bytes */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, 8U);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ /* Send CMD55 APP_CMD with argument as card's RCA */
+ errorstate = SDMMC_CmdAppCommand(hsd->Instance, (uint32_t)((hsd->SdCard.RelCardAdd) << 16U));
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = 8U;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_8B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hsd->Instance, &config);
+
+ /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */
+ errorstate = SDMMC_CmdSendSCR(hsd->Instance);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ return errorstate;
+ }
+
+ while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+ {
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXDAVL))
+ {
+ *(tempscr + index) = SDIO_ReadFIFO(hsd->Instance);
+ index++;
+ }
+
+ if((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT)
+ {
+ return HAL_SD_ERROR_TIMEOUT;
+ }
+ }
+
+ if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
+ {
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
+
+ return HAL_SD_ERROR_DATA_TIMEOUT;
+ }
+ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
+ {
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
+
+ return HAL_SD_ERROR_DATA_CRC_FAIL;
+ }
+ else if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
+ {
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
+
+ return HAL_SD_ERROR_RX_OVERRUN;
+ }
+ else
+ {
+ /* No error flag set */
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_DATA_FLAGS);
+
+ *scr = (((tempscr[1] & SDMMC_0TO7BITS) << 24) | ((tempscr[1] & SDMMC_8TO15BITS) << 8) |\
+ ((tempscr[1] & SDMMC_16TO23BITS) >> 8) | ((tempscr[1] & SDMMC_24TO31BITS) >> 24));
+ scr++;
+ *scr = (((tempscr[0] & SDMMC_0TO7BITS) << 24) | ((tempscr[0] & SDMMC_8TO15BITS) << 8) |\
+ ((tempscr[0] & SDMMC_16TO23BITS) >> 8) | ((tempscr[0] & SDMMC_24TO31BITS) >> 24));
+
+ }
+
+ return HAL_SD_ERROR_NONE;
+}
+
+/**
+ * @brief Wrap up reading in non-blocking mode.
+ * @param hsd: pointer to a SD_HandleTypeDef structure that contains
+ * the configuration information.
+ * @retval None
+ */
+static void SD_Read_IT(SD_HandleTypeDef *hsd)
+{
+ uint32_t count, data, dataremaining;
+ uint8_t* tmp;
+
+ tmp = hsd->pRxBuffPtr;
+ dataremaining = hsd->RxXferSize;
+
+ if (dataremaining > 0U)
+ {
+ /* Read data from SDIO Rx FIFO */
+ for(count = 0U; count < 8U; count++)
+ {
+ data = SDIO_ReadFIFO(hsd->Instance);
+ *tmp = (uint8_t)(data & 0xFFU);
+ tmp++;
+ dataremaining--;
+ *tmp = (uint8_t)((data >> 8U) & 0xFFU);
+ tmp++;
+ dataremaining--;
+ *tmp = (uint8_t)((data >> 16U) & 0xFFU);
+ tmp++;
+ dataremaining--;
+ *tmp = (uint8_t)((data >> 24U) & 0xFFU);
+ tmp++;
+ dataremaining--;
+ }
+
+ hsd->pRxBuffPtr = tmp;
+ hsd->RxXferSize = dataremaining;
+ }
+}
+
+/**
+ * @brief Wrap up writing in non-blocking mode.
+ * @param hsd: pointer to a SD_HandleTypeDef structure that contains
+ * the configuration information.
+ * @retval None
+ */
+static void SD_Write_IT(SD_HandleTypeDef *hsd)
+{
+ uint32_t count, data, dataremaining;
+ uint8_t* tmp;
+
+ tmp = hsd->pTxBuffPtr;
+ dataremaining = hsd->TxXferSize;
+
+ if (dataremaining > 0U)
+ {
+ /* Write data to SDIO Tx FIFO */
+ for(count = 0U; count < 8U; count++)
+ {
+ data = (uint32_t)(*tmp);
+ tmp++;
+ dataremaining--;
+ data |= ((uint32_t)(*tmp) << 8U);
+ tmp++;
+ dataremaining--;
+ data |= ((uint32_t)(*tmp) << 16U);
+ tmp++;
+ dataremaining--;
+ data |= ((uint32_t)(*tmp) << 24U);
+ tmp++;
+ dataremaining--;
+ (void)SDIO_WriteFIFO(hsd->Instance, &data);
+ }
+
+ hsd->pTxBuffPtr = tmp;
+ hsd->TxXferSize = dataremaining;
+ }
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_SD_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* SDIO */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1