From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c | 3960 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 3,960 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c
new file mode 100644
index 0000000..bb02cac
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Board/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c
@@ -0,0 +1,3960 @@
+/**
+ ******************************************************************************
+ * @file stm32f1xx_hal_spi.c
+ * @author MCD Application Team
+ * @brief SPI HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Serial Peripheral Interface (SPI) peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The SPI HAL driver can be used as follows:
+
+ (#) Declare a SPI_HandleTypeDef handle structure, for example:
+ SPI_HandleTypeDef hspi;
+
+ (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API:
+ (##) Enable the SPIx interface clock
+ (##) SPI pins configuration
+ (+++) Enable the clock for the SPI GPIOs
+ (+++) Configure these SPI pins as alternate function push-pull
+ (##) NVIC configuration if you need to use interrupt process
+ (+++) Configure the SPIx interrupt priority
+ (+++) Enable the NVIC SPI IRQ handle
+ (##) DMA Configuration if you need to use DMA process
+ (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel
+ (+++) Enable the DMAx clock
+ (+++) Configure the DMA handle parameters
+ (+++) Configure the DMA Tx or Rx Stream/Channel
+ (+++) Associate the initialized hdma_tx(or _rx) handle to the hspi DMA Tx or Rx handle
+ (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream/Channel
+
+ (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS
+ management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure.
+
+ (#) Initialize the SPI registers by calling the HAL_SPI_Init() API:
+ (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+ by calling the customized HAL_SPI_MspInit() API.
+ [..]
+ Circular mode restriction:
+ (#) The DMA circular mode cannot be used when the SPI is configured in these modes:
+ (##) Master 2Lines RxOnly
+ (##) Master 1Line Rx
+ (#) The CRC feature is not managed when the DMA circular mode is enabled
+ (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs
+ the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks
+ [..]
+ Master Receive mode restriction:
+ (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=1) or
+ bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI
+ does not initiate a new transfer the following procedure has to be respected:
+ (##) HAL_SPI_DeInit()
+ (##) HAL_SPI_Init()
+ [..]
+ Callback registration:
+
+ (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1U
+ allows the user to configure dynamically the driver callbacks.
+ Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback.
+
+ Function HAL_SPI_RegisterCallback() allows to register following callbacks:
+ (++) TxCpltCallback : SPI Tx Completed callback
+ (++) RxCpltCallback : SPI Rx Completed callback
+ (++) TxRxCpltCallback : SPI TxRx Completed callback
+ (++) TxHalfCpltCallback : SPI Tx Half Completed callback
+ (++) RxHalfCpltCallback : SPI Rx Half Completed callback
+ (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback
+ (++) ErrorCallback : SPI Error callback
+ (++) AbortCpltCallback : SPI Abort callback
+ (++) MspInitCallback : SPI Msp Init callback
+ (++) MspDeInitCallback : SPI Msp DeInit callback
+ This function takes as parameters the HAL peripheral handle, the Callback ID
+ and a pointer to the user callback function.
+
+
+ (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default
+ weak function.
+ HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle,
+ and the Callback ID.
+ This function allows to reset following callbacks:
+ (++) TxCpltCallback : SPI Tx Completed callback
+ (++) RxCpltCallback : SPI Rx Completed callback
+ (++) TxRxCpltCallback : SPI TxRx Completed callback
+ (++) TxHalfCpltCallback : SPI Tx Half Completed callback
+ (++) RxHalfCpltCallback : SPI Rx Half Completed callback
+ (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback
+ (++) ErrorCallback : SPI Error callback
+ (++) AbortCpltCallback : SPI Abort callback
+ (++) MspInitCallback : SPI Msp Init callback
+ (++) MspDeInitCallback : SPI Msp DeInit callback
+
+ [..]
+ By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET
+ all callbacks are set to the corresponding weak functions:
+ examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback().
+ Exception done for MspInit and MspDeInit functions that are
+ reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when
+ these callbacks are null (not registered beforehand).
+ If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit()
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state.
+
+ [..]
+ Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only.
+ Exception done MspInit/MspDeInit functions that can be registered/unregistered
+ in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state,
+ thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
+ Then, the user first registers the MspInit/MspDeInit user callbacks
+ using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit()
+ or HAL_SPI_Init() function.
+
+ [..]
+ When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registering feature is not available
+ and weak (surcharged) callbacks are used.
+
+ [..]
+ Using the HAL it is not possible to reach all supported SPI frequency with the different SPI Modes,
+ the following table resume the max SPI frequency reached with data size 8bits/16bits,
+ according to frequency of the APBx Peripheral Clock (fPCLK) used by the SPI instance.
+
+ @endverbatim
+
+ Additional table :
+
+ DataSize = SPI_DATASIZE_8BIT:
+ +----------------------------------------------------------------------------------------------+
+ | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line |
+ | Process | Transfer mode |---------------------|----------------------|----------------------|
+ | | | Master | Slave | Master | Slave | Master | Slave |
+ |==============================================================================================|
+ | T | Polling | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | / | Interrupt | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA |
+ | R |----------------|----------|----------|-----------|----------|-----------|----------|
+ | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | R | Interrupt | Fpclk/8 | Fpclk/8 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/128 | Fpclk/2 |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/2 | Fpclk/64 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/2 | Fpclk/64 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/128|
+ +----------------------------------------------------------------------------------------------+
+
+ DataSize = SPI_DATASIZE_16BIT:
+ +----------------------------------------------------------------------------------------------+
+ | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line |
+ | Process | Transfer mode |---------------------|----------------------|----------------------|
+ | | | Master | Slave | Master | Slave | Master | Slave |
+ |==============================================================================================|
+ | T | Polling | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | / | Interrupt | Fpclk/4 | Fpclk/4 | NA | NA | NA | NA |
+ | R |----------------|----------|----------|-----------|----------|-----------|----------|
+ | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/32 | Fpclk/2 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | R | Interrupt | Fpclk/4 | Fpclk/4 | Fpclk/64 | Fpclk/2 | Fpclk/64 | Fpclk/2 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | Fpclk/64 | Fpclk/2 | Fpclk/128 | Fpclk/2 |
+ |=========|================|==========|==========|===========|==========|===========|==========|
+ | | Polling | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/32 |
+ | |----------------|----------|----------|-----------|----------|-----------|----------|
+ | T | Interrupt | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/64 |
+ | X |----------------|----------|----------|-----------|----------|-----------|----------|
+ | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/2 | Fpclk/128|
+ +----------------------------------------------------------------------------------------------+
+ @note The max SPI frequency depend on SPI data size (8bits, 16bits),
+ SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA).
+ @note
+ (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA()
+ (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA()
+ (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA()
+
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SPI SPI
+ * @brief SPI HAL module driver
+ * @{
+ */
+#ifdef HAL_SPI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+#if (USE_SPI_CRC != 0U) && defined(SPI_CRC_ERROR_WORKAROUND_FEATURE)
+/* CRC WORKAOUND FEATURE: Variable used to determine if device is impacted by implementation
+ * of workaround related to wrong CRC errors detection on SPI2. Conditions in which this workaround
+ * has to be applied, are:
+ * - STM32F101CDE/STM32F103CDE
+ * - Revision ID : Z
+ * - SPI2
+ * - In receive only mode, with CRC calculation enabled, at the end of the CRC reception,
+ * the software needs to check the CRCERR flag. If it is found set, read back the SPI_RXCRC:
+ * + If the value is 0, the complete data transfer is successful.
+ * + Otherwise, one or more errors have been detected during the data transfer by CPU or DMA.
+ * If CRCERR is found reset, the complete data transfer is considered successful.
+ *
+ * Check RevisionID value for identifying if Device is Rev Z (0x0001) in order to enable workaround for
+ * CRC errors wrongly detected
+ */
+/* Pb is that ES_STM32F10xxCDE also identify an issue in Debug registers access while not in Debug mode
+ * Revision ID information is only available in Debug mode, so Workaround could not be implemented
+ * to distinguish Rev Z devices (issue present) from more recent version (issue fixed).
+ * So, in case of Revison Z F101 or F103 devices, below define should be assigned to 1.
+ */
+#define USE_SPI_CRC_ERROR_WORKAROUND 0U
+#endif
+/** @defgroup SPI_Private_Constants SPI Private Constants
+ * @{
+ */
+#define SPI_DEFAULT_TIMEOUT 100U
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup SPI_Private_Functions SPI Private Functions
+ * @{
+ */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAError(DMA_HandleTypeDef *hdma);
+static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma);
+static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma);
+static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State,
+ uint32_t Timeout, uint32_t Tickstart);
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+#if (USE_SPI_CRC != 0U)
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+#endif /* USE_SPI_CRC */
+static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi);
+static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart);
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Functions SPI Exported Functions
+ * @{
+ */
+
+/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and de-initialization functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to initialize and
+ de-initialize the SPIx peripheral:
+
+ (+) User must implement HAL_SPI_MspInit() function in which he configures
+ all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+ (+) Call the function HAL_SPI_Init() to configure the selected device with
+ the selected configuration:
+ (++) Mode
+ (++) Direction
+ (++) Data Size
+ (++) Clock Polarity and Phase
+ (++) NSS Management
+ (++) BaudRate Prescaler
+ (++) FirstBit
+ (++) TIMode
+ (++) CRC Calculation
+ (++) CRC Polynomial if CRC enabled
+
+ (+) Call the function HAL_SPI_DeInit() to restore the default configuration
+ of the selected SPIx peripheral.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the SPI according to the specified parameters
+ * in the SPI_InitTypeDef and initialize the associated handle.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi)
+{
+ /* Check the SPI handle allocation */
+ if (hspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check the parameters */
+ assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+ assert_param(IS_SPI_MODE(hspi->Init.Mode));
+ assert_param(IS_SPI_DIRECTION(hspi->Init.Direction));
+ assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize));
+ assert_param(IS_SPI_NSS(hspi->Init.NSS));
+ assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+ assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit));
+ /* TI mode is not supported on this device.
+ TIMode parameter is mandatory equal to SPI_TIMODE_DISABLE */
+ assert_param(IS_SPI_TIMODE(hspi->Init.TIMode));
+ if (hspi->Init.TIMode == SPI_TIMODE_DISABLE)
+ {
+ assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity));
+ assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase));
+
+ if (hspi->Init.Mode == SPI_MODE_MASTER)
+ {
+ assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+ }
+ else
+ {
+ /* Baudrate prescaler not use in Motoraola Slave mode. force to default value */
+ hspi->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
+ }
+ }
+ else
+ {
+ assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+
+ /* Force polarity and phase to TI protocaol requirements */
+ hspi->Init.CLKPolarity = SPI_POLARITY_LOW;
+ hspi->Init.CLKPhase = SPI_PHASE_1EDGE;
+ }
+#if (USE_SPI_CRC != 0U)
+ assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation));
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial));
+ }
+#else
+ hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+#endif /* USE_SPI_CRC */
+
+ if (hspi->State == HAL_SPI_STATE_RESET)
+ {
+ /* Allocate lock resource and initialize it */
+ hspi->Lock = HAL_UNLOCKED;
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ /* Init the SPI Callback settings */
+ hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */
+ hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */
+ hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */
+ hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */
+ hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
+ hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */
+ hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */
+ hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
+
+ if (hspi->MspInitCallback == NULL)
+ {
+ hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */
+ }
+
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ hspi->MspInitCallback(hspi);
+#else
+ /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+ HAL_SPI_MspInit(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+
+ hspi->State = HAL_SPI_STATE_BUSY;
+
+ /* Disable the selected SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+
+ /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/
+ /* Configure : SPI Mode, Communication Mode, Data size, Clock polarity and phase, NSS management,
+ Communication speed, First bit and CRC calculation state */
+ WRITE_REG(hspi->Instance->CR1, ((hspi->Init.Mode & (SPI_CR1_MSTR | SPI_CR1_SSI)) |
+ (hspi->Init.Direction & (SPI_CR1_RXONLY | SPI_CR1_BIDIMODE)) |
+ (hspi->Init.DataSize & SPI_CR1_DFF) |
+ (hspi->Init.CLKPolarity & SPI_CR1_CPOL) |
+ (hspi->Init.CLKPhase & SPI_CR1_CPHA) |
+ (hspi->Init.NSS & SPI_CR1_SSM) |
+ (hspi->Init.BaudRatePrescaler & SPI_CR1_BR_Msk) |
+ (hspi->Init.FirstBit & SPI_CR1_LSBFIRST) |
+ (hspi->Init.CRCCalculation & SPI_CR1_CRCEN)));
+
+ /* Configure : NSS management */
+ WRITE_REG(hspi->Instance->CR2, ((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE));
+
+#if (USE_SPI_CRC != 0U)
+ /*---------------------------- SPIx CRCPOLY Configuration ------------------*/
+ /* Configure : CRC Polynomial */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ WRITE_REG(hspi->Instance->CRCPR, (hspi->Init.CRCPolynomial & SPI_CRCPR_CRCPOLY_Msk));
+ }
+#endif /* USE_SPI_CRC */
+
+#if defined(SPI_I2SCFGR_I2SMOD)
+ /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */
+ CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD);
+#endif /* SPI_I2SCFGR_I2SMOD */
+
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->State = HAL_SPI_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De-Initialize the SPI peripheral.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi)
+{
+ /* Check the SPI handle allocation */
+ if (hspi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check SPI Instance parameter */
+ assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+
+ hspi->State = HAL_SPI_STATE_BUSY;
+
+ /* Disable the SPI Peripheral Clock */
+ __HAL_SPI_DISABLE(hspi);
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ if (hspi->MspDeInitCallback == NULL)
+ {
+ hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */
+ }
+
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ hspi->MspDeInitCallback(hspi);
+#else
+ /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+ HAL_SPI_MspDeInit(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->State = HAL_SPI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the SPI MSP.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_MspInit should be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-Initialize the SPI MSP.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_MspDeInit should be implemented in the user file
+ */
+}
+
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+/**
+ * @brief Register a User SPI Callback
+ * To be used instead of the weak predefined callback
+ * @param hspi Pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI.
+ * @param CallbackID ID of the callback to be registered
+ * @param pCallback pointer to the Callback function
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID,
+ pSPI_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if (pCallback == NULL)
+ {
+ /* Update the error code */
+ hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK;
+
+ return HAL_ERROR;
+ }
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ if (HAL_SPI_STATE_READY == hspi->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_SPI_TX_COMPLETE_CB_ID :
+ hspi->TxCpltCallback = pCallback;
+ break;
+
+ case HAL_SPI_RX_COMPLETE_CB_ID :
+ hspi->RxCpltCallback = pCallback;
+ break;
+
+ case HAL_SPI_TX_RX_COMPLETE_CB_ID :
+ hspi->TxRxCpltCallback = pCallback;
+ break;
+
+ case HAL_SPI_TX_HALF_COMPLETE_CB_ID :
+ hspi->TxHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_SPI_RX_HALF_COMPLETE_CB_ID :
+ hspi->RxHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID :
+ hspi->TxRxHalfCpltCallback = pCallback;
+ break;
+
+ case HAL_SPI_ERROR_CB_ID :
+ hspi->ErrorCallback = pCallback;
+ break;
+
+ case HAL_SPI_ABORT_CB_ID :
+ hspi->AbortCpltCallback = pCallback;
+ break;
+
+ case HAL_SPI_MSPINIT_CB_ID :
+ hspi->MspInitCallback = pCallback;
+ break;
+
+ case HAL_SPI_MSPDEINIT_CB_ID :
+ hspi->MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Update the error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (HAL_SPI_STATE_RESET == hspi->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_SPI_MSPINIT_CB_ID :
+ hspi->MspInitCallback = pCallback;
+ break;
+
+ case HAL_SPI_MSPDEINIT_CB_ID :
+ hspi->MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Update the error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hspi);
+ return status;
+}
+
+/**
+ * @brief Unregister an SPI Callback
+ * SPI callback is redirected to the weak predefined callback
+ * @param hspi Pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI.
+ * @param CallbackID ID of the callback to be unregistered
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ if (HAL_SPI_STATE_READY == hspi->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_SPI_TX_COMPLETE_CB_ID :
+ hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */
+ break;
+
+ case HAL_SPI_RX_COMPLETE_CB_ID :
+ hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */
+ break;
+
+ case HAL_SPI_TX_RX_COMPLETE_CB_ID :
+ hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */
+ break;
+
+ case HAL_SPI_TX_HALF_COMPLETE_CB_ID :
+ hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */
+ break;
+
+ case HAL_SPI_RX_HALF_COMPLETE_CB_ID :
+ hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
+ break;
+
+ case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID :
+ hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */
+ break;
+
+ case HAL_SPI_ERROR_CB_ID :
+ hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */
+ break;
+
+ case HAL_SPI_ABORT_CB_ID :
+ hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
+ break;
+
+ case HAL_SPI_MSPINIT_CB_ID :
+ hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */
+ break;
+
+ case HAL_SPI_MSPDEINIT_CB_ID :
+ hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */
+ break;
+
+ default :
+ /* Update the error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (HAL_SPI_STATE_RESET == hspi->State)
+ {
+ switch (CallbackID)
+ {
+ case HAL_SPI_MSPINIT_CB_ID :
+ hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */
+ break;
+
+ case HAL_SPI_MSPDEINIT_CB_ID :
+ hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */
+ break;
+
+ default :
+ /* Update the error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK);
+
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hspi);
+ return status;
+}
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions_Group2 IO operation functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ==============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to manage the SPI
+ data transfers.
+
+ [..] The SPI supports master and slave mode :
+
+ (#) There are two modes of transfer:
+ (++) Blocking mode: The communication is performed in polling mode.
+ The HAL status of all data processing is returned by the same function
+ after finishing transfer.
+ (++) No-Blocking mode: The communication is performed using Interrupts
+ or DMA, These APIs return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when
+ using DMA mode.
+ The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks
+ will be executed respectively at the end of the transmit or Receive process
+ The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected
+
+ (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA)
+ exist for 1Line (simplex) and 2Lines (full duplex) modes.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmit an amount of data in blocking mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData pointer to data buffer
+ * @param Size amount of data to be sent
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+ uint16_t initial_TxXferCount;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+ initial_TxXferCount = Size;
+
+ if (hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if ((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->pRxBuffPtr = (uint8_t *)NULL;
+ hspi->RxXferSize = 0U;
+ hspi->RxXferCount = 0U;
+ hspi->TxISR = NULL;
+ hspi->RxISR = NULL;
+
+ /* Configure communication direction : 1Line */
+ if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+ __HAL_SPI_DISABLE(hspi);
+ SPI_1LINE_TX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check if the SPI is already enabled */
+ if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Transmit data in 16 Bit mode */
+ if (hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U))
+ {
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ }
+ /* Transmit data in 16 Bit mode */
+ while (hspi->TxXferCount > 0U)
+ {
+ /* Wait until TXE flag is set to send data */
+ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE))
+ {
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+ /* Transmit data in 8 Bit mode */
+ else
+ {
+ if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U))
+ {
+ *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint8_t);
+ hspi->TxXferCount--;
+ }
+ while (hspi->TxXferCount > 0U)
+ {
+ /* Wait until TXE flag is set to send data */
+ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE))
+ {
+ *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint8_t);
+ hspi->TxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check the end of the transaction */
+ if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+ if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ errorcode = HAL_ERROR;
+ }
+
+error:
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in blocking mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData pointer to data buffer
+ * @param Size amount of data to be received
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ uint32_t tickstart;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+ return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ if (hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if ((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->pTxBuffPtr = (uint8_t *)NULL;
+ hspi->TxXferSize = 0U;
+ hspi->TxXferCount = 0U;
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ /* this is done to handle the CRCNEXT before the latest data */
+ hspi->RxXferCount--;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Configure communication direction: 1Line */
+ if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+ __HAL_SPI_DISABLE(hspi);
+ SPI_1LINE_RX(hspi);
+ }
+
+ /* Check if the SPI is already enabled */
+ if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Receive data in 8 Bit mode */
+ if (hspi->Init.DataSize == SPI_DATASIZE_8BIT)
+ {
+ /* Transfer loop */
+ while (hspi->RxXferCount > 0U)
+ {
+ /* Check the RXNE flag */
+ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE))
+ {
+ /* read the received data */
+ (* (uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint8_t);
+ hspi->RxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+ else
+ {
+ /* Transfer loop */
+ while (hspi->RxXferCount > 0U)
+ {
+ /* Check the RXNE flag */
+ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE))
+ {
+ *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+ }
+ else
+ {
+ /* Timeout management */
+ if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Handle the CRC Transmission */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* freeze the CRC before the latest data */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+
+ /* Check if CRCNEXT is well reseted by hardware */
+ if (READ_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT))
+ {
+ /* Workaround to force CRCNEXT bit to zero in case of CRCNEXT is not reset automatically by hardware */
+ CLEAR_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+ /* Read the latest data */
+ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* the latest data has not been received */
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Receive last data in 16 Bit mode */
+ if (hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR;
+ }
+ /* Receive last data in 8 Bit mode */
+ else
+ {
+ (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR;
+ }
+
+ /* Wait the CRC data */
+ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+
+ /* Read CRC to Flush DR and RXNE flag */
+ READ_REG(hspi->Instance->DR);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check the end of the transaction */
+ if (SPI_EndRxTransaction(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ /* Check if CRC error is valid or not (workaround to be applied or not) */
+ if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+
+ /* Reset CRC Calculation */
+ SPI_RESET_CRC(hspi);
+ }
+ else
+ {
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+ }
+#endif /* USE_SPI_CRC */
+
+ if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ errorcode = HAL_ERROR;
+ }
+
+error :
+ hspi->State = HAL_SPI_STATE_READY;
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in blocking mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData pointer to transmission data buffer
+ * @param pRxData pointer to reception data buffer
+ * @param Size amount of data to be sent and received
+ * @param Timeout Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size,
+ uint32_t Timeout)
+{
+ uint16_t initial_TxXferCount;
+ uint32_t tmp_mode;
+ HAL_SPI_StateTypeDef tmp_state;
+ uint32_t tickstart;
+
+ /* Variable used to alternate Rx and Tx during transfer */
+ uint32_t txallowed = 1U;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* Init temporary variables */
+ tmp_state = hspi->State;
+ tmp_mode = hspi->Init.Mode;
+ initial_TxXferCount = Size;
+
+ if (!((tmp_state == HAL_SPI_STATE_READY) || \
+ ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+ if (hspi->State != HAL_SPI_STATE_BUSY_RX)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ /* Set the transaction information */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pRxData;
+ hspi->RxXferCount = Size;
+ hspi->RxXferSize = Size;
+ hspi->pTxBuffPtr = (uint8_t *)pTxData;
+ hspi->TxXferCount = Size;
+ hspi->TxXferSize = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check if the SPI is already enabled */
+ if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Transmit and Receive data in 16 Bit mode */
+ if (hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+ {
+ if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U))
+ {
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ }
+ while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
+ {
+ /* Check TXE flag */
+ if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U))
+ {
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+ /* Next Data is a reception (Rx). Tx not allowed */
+ txallowed = 0U;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ }
+
+ /* Check RXNE flag */
+ if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U))
+ {
+ *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR;
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+ /* Next Data is a Transmission (Tx). Tx is allowed */
+ txallowed = 1U;
+ }
+ if (((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+ /* Transmit and Receive data in 8 Bit mode */
+ else
+ {
+ if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U))
+ {
+ *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint8_t);
+ hspi->TxXferCount--;
+ }
+ while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U))
+ {
+ /* Check TXE flag */
+ if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U))
+ {
+ *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr++;
+ hspi->TxXferCount--;
+ /* Next Data is a reception (Rx). Tx not allowed */
+ txallowed = 0U;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ }
+
+ /* Wait until RXNE flag is reset */
+ if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U))
+ {
+ (*(uint8_t *)hspi->pRxBuffPtr) = hspi->Instance->DR;
+ hspi->pRxBuffPtr++;
+ hspi->RxXferCount--;
+ /* Next Data is a Transmission (Tx). Tx is allowed */
+ txallowed = 1U;
+ }
+ if ((((HAL_GetTick() - tickstart) >= Timeout) && ((Timeout != HAL_MAX_DELAY))) || (Timeout == 0U))
+ {
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ }
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Read CRC from DR to close CRC calculation process */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Wait until TXE flag */
+ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK)
+ {
+ /* Error on the CRC reception */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ errorcode = HAL_TIMEOUT;
+ goto error;
+ }
+ /* Read CRC */
+ READ_REG(hspi->Instance->DR);
+ }
+
+ /* Check if CRC error occurred */
+ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ /* Check if CRC error is valid or not (workaround to be applied or not) */
+ if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+
+ /* Reset CRC Calculation */
+ SPI_RESET_CRC(hspi);
+
+ errorcode = HAL_ERROR;
+ }
+ else
+ {
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check the end of the transaction */
+ if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK)
+ {
+ errorcode = HAL_ERROR;
+ hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+ goto error;
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+error :
+ hspi->State = HAL_SPI_STATE_READY;
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with Interrupt.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData pointer to data buffer
+ * @param Size amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if ((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ if (hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->pRxBuffPtr = (uint8_t *)NULL;
+ hspi->RxXferSize = 0U;
+ hspi->RxXferCount = 0U;
+ hspi->RxISR = NULL;
+
+ /* Set the function for IT treatment */
+ if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ hspi->TxISR = SPI_TxISR_16BIT;
+ }
+ else
+ {
+ hspi->TxISR = SPI_TxISR_8BIT;
+ }
+
+ /* Configure communication direction : 1Line */
+ if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+ __HAL_SPI_DISABLE(hspi);
+ SPI_1LINE_TX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+
+
+ /* Check if the SPI is already enabled */
+ if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with Interrupt.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData pointer to data buffer
+ * @param Size amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+ return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if (hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if ((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->pTxBuffPtr = (uint8_t *)NULL;
+ hspi->TxXferSize = 0U;
+ hspi->TxXferCount = 0U;
+ hspi->TxISR = NULL;
+
+ /* Set the function for IT treatment */
+ if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ hspi->RxISR = SPI_RxISR_16BIT;
+ }
+ else
+ {
+ hspi->RxISR = SPI_RxISR_8BIT;
+ }
+
+ /* Configure communication direction : 1Line */
+ if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+ __HAL_SPI_DISABLE(hspi);
+ SPI_1LINE_RX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Enable TXE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Note : The SPI must be enabled after unlocking current process
+ to avoid the risk of SPI interrupt handle execution before current
+ process unlock */
+
+ /* Check if the SPI is already enabled */
+ if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData pointer to transmission data buffer
+ * @param pRxData pointer to reception data buffer
+ * @param Size amount of data to be sent and received
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+ uint32_t tmp_mode;
+ HAL_SPI_StateTypeDef tmp_state;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ /* Init temporary variables */
+ tmp_state = hspi->State;
+ tmp_mode = hspi->Init.Mode;
+
+ if (!((tmp_state == HAL_SPI_STATE_READY) || \
+ ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+ if (hspi->State != HAL_SPI_STATE_BUSY_RX)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ /* Set the transaction information */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pTxData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = (uint8_t *)pRxData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Set the function for IT treatment */
+ if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ hspi->RxISR = SPI_2linesRxISR_16BIT;
+ hspi->TxISR = SPI_2linesTxISR_16BIT;
+ }
+ else
+ {
+ hspi->RxISR = SPI_2linesRxISR_8BIT;
+ hspi->TxISR = SPI_2linesTxISR_8BIT;
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Enable TXE, RXNE and ERR interrupt */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Check if the SPI is already enabled */
+ if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit an amount of data in non-blocking mode with DMA.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData pointer to data buffer
+ * @param Size amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check tx dma handle */
+ assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx));
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if (hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if ((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_TX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->pRxBuffPtr = (uint8_t *)NULL;
+ hspi->TxISR = NULL;
+ hspi->RxISR = NULL;
+ hspi->RxXferSize = 0U;
+ hspi->RxXferCount = 0U;
+
+ /* Configure communication direction : 1Line */
+ if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+ __HAL_SPI_DISABLE(hspi);
+ SPI_1LINE_TX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Set the SPI TxDMA Half transfer complete callback */
+ hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt;
+
+ /* Set the SPI TxDMA transfer complete callback */
+ hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt;
+
+ /* Set the DMA error callback */
+ hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ hspi->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the Tx DMA Stream/Channel */
+ if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR,
+ hspi->TxXferCount))
+ {
+ /* Update SPI error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ errorcode = HAL_ERROR;
+
+ hspi->State = HAL_SPI_STATE_READY;
+ goto error;
+ }
+
+ /* Check if the SPI is already enabled */
+ if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Enable the SPI Error Interrupt Bit */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR));
+
+ /* Enable Tx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Receive an amount of data in non-blocking mode with DMA.
+ * @note In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pData pointer to data buffer
+ * @note When the CRC feature is enabled the pData Length must be Size + 1.
+ * @param Size amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check rx dma handle */
+ assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx));
+
+ if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+
+ /* Check tx dma handle */
+ assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx));
+
+ /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
+ return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size);
+ }
+
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ if (hspi->State != HAL_SPI_STATE_READY)
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if ((pData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Set the transaction information */
+ hspi->State = HAL_SPI_STATE_BUSY_RX;
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pRxBuffPtr = (uint8_t *)pData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /*Init field not used in handle to zero */
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+ hspi->TxXferSize = 0U;
+ hspi->TxXferCount = 0U;
+
+ /* Configure communication direction : 1Line */
+ if (hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ {
+ /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */
+ __HAL_SPI_DISABLE(hspi);
+ SPI_1LINE_RX(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Set the SPI RxDMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+
+ /* Set the SPI Rx DMA transfer complete callback */
+ hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+
+ /* Set the DMA error callback */
+ hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ hspi->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the Rx DMA Stream/Channel */
+ if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr,
+ hspi->RxXferCount))
+ {
+ /* Update SPI error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ errorcode = HAL_ERROR;
+
+ hspi->State = HAL_SPI_STATE_READY;
+ goto error;
+ }
+
+ /* Check if the SPI is already enabled */
+ if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+
+ /* Enable the SPI Error Interrupt Bit */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR));
+
+ /* Enable Rx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+error:
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Transmit and Receive an amount of data in non-blocking mode with DMA.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param pTxData pointer to transmission data buffer
+ * @param pRxData pointer to reception data buffer
+ * @note When the CRC feature is enabled the pRxData Length must be Size + 1
+ * @param Size amount of data to be sent
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData,
+ uint16_t Size)
+{
+ uint32_t tmp_mode;
+ HAL_SPI_StateTypeDef tmp_state;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check rx & tx dma handles */
+ assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx));
+ assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx));
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ /* Init temporary variables */
+ tmp_state = hspi->State;
+ tmp_mode = hspi->Init.Mode;
+
+ if (!((tmp_state == HAL_SPI_STATE_READY) ||
+ ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+ if (hspi->State != HAL_SPI_STATE_BUSY_RX)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ /* Set the transaction information */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pTxData;
+ hspi->TxXferSize = Size;
+ hspi->TxXferCount = Size;
+ hspi->pRxBuffPtr = (uint8_t *)pRxData;
+ hspi->RxXferSize = Size;
+ hspi->RxXferCount = Size;
+
+ /* Init field not used in handle to zero */
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+
+#if (USE_SPI_CRC != 0U)
+ /* Reset CRC Calculation */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */
+ if (hspi->State == HAL_SPI_STATE_BUSY_RX)
+ {
+ /* Set the SPI Rx DMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+ hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+ }
+ else
+ {
+ /* Set the SPI Tx/Rx DMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt;
+ hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
+ }
+
+ /* Set the DMA error callback */
+ hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ hspi->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the Rx DMA Stream/Channel */
+ if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr,
+ hspi->RxXferCount))
+ {
+ /* Update SPI error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ errorcode = HAL_ERROR;
+
+ hspi->State = HAL_SPI_STATE_READY;
+ goto error;
+ }
+
+ /* Enable Rx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+ /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing
+ is performed in DMA reception complete callback */
+ hspi->hdmatx->XferHalfCpltCallback = NULL;
+ hspi->hdmatx->XferCpltCallback = NULL;
+ hspi->hdmatx->XferErrorCallback = NULL;
+ hspi->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the Tx DMA Stream/Channel */
+ if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR,
+ hspi->TxXferCount))
+ {
+ /* Update SPI error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ errorcode = HAL_ERROR;
+
+ hspi->State = HAL_SPI_STATE_READY;
+ goto error;
+ }
+
+ /* Check if the SPI is already enabled */
+ if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+ /* Enable the SPI Error Interrupt Bit */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR));
+
+ /* Enable Tx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+/**
+ * @brief Abort ongoing transfer (blocking mode).
+ * @param hspi SPI handle.
+ * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx),
+ * started in Interrupt or DMA mode.
+ * This procedure performs following operations :
+ * - Disable SPI Interrupts (depending of transfer direction)
+ * - Disable the DMA transfer in the peripheral register (if enabled)
+ * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
+ * - Set handle State to READY
+ * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi)
+{
+ HAL_StatusTypeDef errorcode;
+ __IO uint32_t count;
+ __IO uint32_t resetcount;
+
+ /* Initialized local variable */
+ errorcode = HAL_OK;
+ resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
+ count = resetcount;
+
+ /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE);
+
+ /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */
+ if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE))
+ {
+ hspi->TxISR = SPI_AbortTx_ISR;
+ /* Wait HAL_SPI_STATE_ABORT state */
+ do
+ {
+ if (count == 0U)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+ break;
+ }
+ count--;
+ } while (hspi->State != HAL_SPI_STATE_ABORT);
+ /* Reset Timeout Counter */
+ count = resetcount;
+ }
+
+ if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE))
+ {
+ hspi->RxISR = SPI_AbortRx_ISR;
+ /* Wait HAL_SPI_STATE_ABORT state */
+ do
+ {
+ if (count == 0U)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+ break;
+ }
+ count--;
+ } while (hspi->State != HAL_SPI_STATE_ABORT);
+ /* Reset Timeout Counter */
+ count = resetcount;
+ }
+
+ /* Disable the SPI DMA Tx request if enabled */
+ if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN))
+ {
+ /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */
+ if (hspi->hdmatx != NULL)
+ {
+ /* Set the SPI DMA Abort callback :
+ will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */
+ hspi->hdmatx->XferAbortCallback = NULL;
+
+ /* Abort DMA Tx Handle linked to SPI Peripheral */
+ if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK)
+ {
+ hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+ }
+
+ /* Disable Tx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN));
+
+ /* Wait until TXE flag is set */
+ do
+ {
+ if (count == 0U)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+ break;
+ }
+ count--;
+ } while ((hspi->Instance->SR & SPI_FLAG_TXE) == RESET);
+ }
+ }
+
+ /* Disable the SPI DMA Rx request if enabled */
+ if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN))
+ {
+ /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */
+ if (hspi->hdmarx != NULL)
+ {
+ /* Set the SPI DMA Abort callback :
+ will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */
+ hspi->hdmarx->XferAbortCallback = NULL;
+
+ /* Abort DMA Rx Handle linked to SPI Peripheral */
+ if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK)
+ {
+ hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+ }
+
+ /* Disable peripheral */
+ __HAL_SPI_DISABLE(hspi);
+
+ /* Disable Rx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXDMAEN));
+ }
+ }
+ /* Reset Tx and Rx transfer counters */
+ hspi->RxXferCount = 0U;
+ hspi->TxXferCount = 0U;
+
+ /* Check error during Abort procedure */
+ if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT)
+ {
+ /* return HAL_Error in case of error during Abort procedure */
+ errorcode = HAL_ERROR;
+ }
+ else
+ {
+ /* Reset errorCode */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ }
+
+ /* Clear the Error flags in the SR register */
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+
+ /* Restore hspi->state to ready */
+ hspi->State = HAL_SPI_STATE_READY;
+
+ return errorcode;
+}
+
+/**
+ * @brief Abort ongoing transfer (Interrupt mode).
+ * @param hspi SPI handle.
+ * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx),
+ * started in Interrupt or DMA mode.
+ * This procedure performs following operations :
+ * - Disable SPI Interrupts (depending of transfer direction)
+ * - Disable the DMA transfer in the peripheral register (if enabled)
+ * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
+ * - Set handle State to READY
+ * - At abort completion, call user abort complete callback
+ * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be
+ * considered as completed only when user abort complete callback is executed (not when exiting function).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi)
+{
+ HAL_StatusTypeDef errorcode;
+ uint32_t abortcplt ;
+ __IO uint32_t count;
+ __IO uint32_t resetcount;
+
+ /* Initialized local variable */
+ errorcode = HAL_OK;
+ abortcplt = 1U;
+ resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
+ count = resetcount;
+
+ /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE);
+
+ /* Change Rx and Tx Irq Handler to Disable TXEIE, RXNEIE and ERRIE interrupts */
+ if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE))
+ {
+ hspi->TxISR = SPI_AbortTx_ISR;
+ /* Wait HAL_SPI_STATE_ABORT state */
+ do
+ {
+ if (count == 0U)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+ break;
+ }
+ count--;
+ } while (hspi->State != HAL_SPI_STATE_ABORT);
+ /* Reset Timeout Counter */
+ count = resetcount;
+ }
+
+ if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE))
+ {
+ hspi->RxISR = SPI_AbortRx_ISR;
+ /* Wait HAL_SPI_STATE_ABORT state */
+ do
+ {
+ if (count == 0U)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+ break;
+ }
+ count--;
+ } while (hspi->State != HAL_SPI_STATE_ABORT);
+ /* Reset Timeout Counter */
+ count = resetcount;
+ }
+
+ /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialised
+ before any call to DMA Abort functions */
+ /* DMA Tx Handle is valid */
+ if (hspi->hdmatx != NULL)
+ {
+ /* Set DMA Abort Complete callback if UART DMA Tx request if enabled.
+ Otherwise, set it to NULL */
+ if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN))
+ {
+ hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback;
+ }
+ else
+ {
+ hspi->hdmatx->XferAbortCallback = NULL;
+ }
+ }
+ /* DMA Rx Handle is valid */
+ if (hspi->hdmarx != NULL)
+ {
+ /* Set DMA Abort Complete callback if UART DMA Rx request if enabled.
+ Otherwise, set it to NULL */
+ if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN))
+ {
+ hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback;
+ }
+ else
+ {
+ hspi->hdmarx->XferAbortCallback = NULL;
+ }
+ }
+
+ /* Disable the SPI DMA Tx request if enabled */
+ if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN))
+ {
+ /* Abort the SPI DMA Tx Stream/Channel */
+ if (hspi->hdmatx != NULL)
+ {
+ /* Abort DMA Tx Handle linked to SPI Peripheral */
+ if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK)
+ {
+ hspi->hdmatx->XferAbortCallback = NULL;
+ hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+ }
+ else
+ {
+ abortcplt = 0U;
+ }
+ }
+ }
+ /* Disable the SPI DMA Rx request if enabled */
+ if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN))
+ {
+ /* Abort the SPI DMA Rx Stream/Channel */
+ if (hspi->hdmarx != NULL)
+ {
+ /* Abort DMA Rx Handle linked to SPI Peripheral */
+ if (HAL_DMA_Abort_IT(hspi->hdmarx) != HAL_OK)
+ {
+ hspi->hdmarx->XferAbortCallback = NULL;
+ hspi->ErrorCode = HAL_SPI_ERROR_ABORT;
+ }
+ else
+ {
+ abortcplt = 0U;
+ }
+ }
+ }
+
+ if (abortcplt == 1U)
+ {
+ /* Reset Tx and Rx transfer counters */
+ hspi->RxXferCount = 0U;
+ hspi->TxXferCount = 0U;
+
+ /* Check error during Abort procedure */
+ if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT)
+ {
+ /* return HAL_Error in case of error during Abort procedure */
+ errorcode = HAL_ERROR;
+ }
+ else
+ {
+ /* Reset errorCode */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ }
+
+ /* Clear the Error flags in the SR register */
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+
+ /* Restore hspi->State to Ready */
+ hspi->State = HAL_SPI_STATE_READY;
+
+ /* As no DMA to be aborted, call directly user Abort complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->AbortCpltCallback(hspi);
+#else
+ HAL_SPI_AbortCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+
+ return errorcode;
+}
+
+/**
+ * @brief Pause the DMA Transfer.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi)
+{
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Disable the SPI DMA Tx & Rx requests */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Resume the DMA Transfer.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi)
+{
+ /* Process Locked */
+ __HAL_LOCK(hspi);
+
+ /* Enable the SPI DMA Tx & Rx requests */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DMA Transfer.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi)
+{
+ HAL_StatusTypeDef errorcode = HAL_OK;
+ /* The Lock is not implemented on this API to allow the user application
+ to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback():
+ when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+ and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback()
+ */
+
+ /* Abort the SPI DMA tx Stream/Channel */
+ if (hspi->hdmatx != NULL)
+ {
+ if (HAL_OK != HAL_DMA_Abort(hspi->hdmatx))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ errorcode = HAL_ERROR;
+ }
+ }
+ /* Abort the SPI DMA rx Stream/Channel */
+ if (hspi->hdmarx != NULL)
+ {
+ if (HAL_OK != HAL_DMA_Abort(hspi->hdmarx))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ errorcode = HAL_ERROR;
+ }
+ }
+
+ /* Disable the SPI DMA Tx & Rx requests */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+ hspi->State = HAL_SPI_STATE_READY;
+ return errorcode;
+}
+
+/**
+ * @brief Handle SPI interrupt request.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for the specified SPI module.
+ * @retval None
+ */
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi)
+{
+ uint32_t itsource = hspi->Instance->CR2;
+ uint32_t itflag = hspi->Instance->SR;
+
+ /* SPI in mode Receiver ----------------------------------------------------*/
+ if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) == RESET) &&
+ (SPI_CHECK_FLAG(itflag, SPI_FLAG_RXNE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_RXNE) != RESET))
+ {
+ hspi->RxISR(hspi);
+ return;
+ }
+
+ /* SPI in mode Transmitter -------------------------------------------------*/
+ if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_TXE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_TXE) != RESET))
+ {
+ hspi->TxISR(hspi);
+ return;
+ }
+
+ /* SPI in Error Treatment --------------------------------------------------*/
+ if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET))
+ && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET))
+ {
+ /* SPI Overrun error interrupt occurred ----------------------------------*/
+ if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET)
+ {
+ if (hspi->State != HAL_SPI_STATE_BUSY_TX)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR);
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+ else
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ return;
+ }
+ }
+
+ /* SPI Mode Fault error interrupt occurred -------------------------------*/
+ if (SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF);
+ __HAL_SPI_CLEAR_MODFFLAG(hspi);
+ }
+
+ /* SPI Frame error interrupt occurred ------------------------------------*/
+
+ if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ /* Disable all interrupts */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR);
+
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Disable the SPI DMA requests if enabled */
+ if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN)) || (HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN)))
+ {
+ CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN));
+
+ /* Abort the SPI DMA Rx channel */
+ if (hspi->hdmarx != NULL)
+ {
+ /* Set the SPI DMA Abort callback :
+ will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */
+ hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError;
+ if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+ }
+ }
+ /* Abort the SPI DMA Tx channel */
+ if (hspi->hdmatx != NULL)
+ {
+ /* Set the SPI DMA Abort callback :
+ will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */
+ hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError;
+ if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx))
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+ }
+ }
+ }
+ else
+ {
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+ }
+ return;
+ }
+}
+
+/**
+ * @brief Tx Transfer completed callback.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Transfer completed callback.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_RxCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx and Rx Transfer completed callback.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxRxCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx Half Transfer completed callback.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxHalfCpltCallback should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Rx Half Transfer completed callback.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file
+ */
+}
+
+/**
+ * @brief Tx and Rx Half Transfer callback.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file
+ */
+}
+
+/**
+ * @brief SPI error callback.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_ErrorCallback should be implemented in the user file
+ */
+ /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes
+ and user can use HAL_SPI_GetError() API to check the latest error occurred
+ */
+}
+
+/**
+ * @brief SPI Abort Complete callback.
+ * @param hspi SPI handle.
+ * @retval None
+ */
+__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_SPI_AbortCpltCallback can be implemented in the user file.
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @brief SPI control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control the SPI.
+ (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral
+ (+) HAL_SPI_GetError() check in run-time Errors occurring during communication
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the SPI handle state.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval SPI state
+ */
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi)
+{
+ /* Return SPI handle state */
+ return hspi->State;
+}
+
+/**
+ * @brief Return the SPI error code.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval SPI error code in bitmap format
+ */
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi)
+{
+ /* Return SPI ErrorCode */
+ return hspi->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Private_Functions
+ * @brief Private functions
+ * @{
+ */
+
+/**
+ * @brief DMA SPI transmit process complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ uint32_t tickstart;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* DMA Normal Mode */
+ if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC)
+ {
+ /* Disable ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+ /* Disable Tx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+ /* Check the end of the transaction */
+ if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received data is not read */
+ if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+ hspi->TxXferCount = 0U;
+ hspi->State = HAL_SPI_STATE_READY;
+
+ if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ return;
+ }
+ }
+ /* Call user Tx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->TxCpltCallback(hspi);
+#else
+ HAL_SPI_TxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief DMA SPI receive process complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ uint32_t tickstart;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* DMA Normal Mode */
+ if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC)
+ {
+ /* Disable ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+#if (USE_SPI_CRC != 0U)
+ /* CRC handling */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Wait until RXNE flag */
+ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ /* Error on the CRC reception */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ }
+ /* Read CRC */
+ READ_REG(hspi->Instance->DR);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check if we are in Master RX 2 line mode */
+ if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
+ {
+ /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+ }
+ else
+ {
+ /* Normal case */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+ }
+
+ /* Check the end of the transaction */
+ if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ hspi->ErrorCode = HAL_SPI_ERROR_FLAG;
+ }
+
+ hspi->RxXferCount = 0U;
+ hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ /* Check if CRC error is valid or not (workaround to be applied or not) */
+ if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+
+ /* Reset CRC Calculation */
+ SPI_RESET_CRC(hspi);
+ }
+ else
+ {
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+ }
+#endif /* USE_SPI_CRC */
+
+ if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ return;
+ }
+ }
+ /* Call user Rx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->RxCpltCallback(hspi);
+#else
+ HAL_SPI_RxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief DMA SPI transmit receive process complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ uint32_t tickstart;
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* DMA Normal Mode */
+ if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC)
+ {
+ /* Disable ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+#if (USE_SPI_CRC != 0U)
+ /* CRC handling */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Wait the CRC data */
+ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+ }
+ /* Read CRC to Flush DR and RXNE flag */
+ READ_REG(hspi->Instance->DR);
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Check the end of the transaction */
+ if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Disable Rx/Tx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ hspi->TxXferCount = 0U;
+ hspi->RxXferCount = 0U;
+ hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ /* Check if CRC error is valid or not (workaround to be applied or not) */
+ if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+
+ /* Reset CRC Calculation */
+ SPI_RESET_CRC(hspi);
+ }
+ else
+ {
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+ }
+#endif /* USE_SPI_CRC */
+
+ if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ return;
+ }
+ }
+ /* Call user TxRx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->TxRxCpltCallback(hspi);
+#else
+ HAL_SPI_TxRxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief DMA SPI half transmit process complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+ /* Call user Tx half complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->TxHalfCpltCallback(hspi);
+#else
+ HAL_SPI_TxHalfCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief DMA SPI half receive process complete callback
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+ /* Call user Rx half complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->RxHalfCpltCallback(hspi);
+#else
+ HAL_SPI_RxHalfCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief DMA SPI half transmit receive process complete callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+ /* Call user TxRx half complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->TxRxHalfCpltCallback(hspi);
+#else
+ HAL_SPI_TxRxHalfCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief DMA SPI communication error callback.
+ * @param hdma pointer to a DMA_HandleTypeDef structure that contains
+ * the configuration information for the specified DMA module.
+ * @retval None
+ */
+static void SPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+ /* Stop the disable DMA transfer on SPI side */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief DMA SPI communication abort callback, when initiated by HAL services on Error
+ * (To be called at end of DMA Abort procedure following error occurrence).
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ hspi->RxXferCount = 0U;
+ hspi->TxXferCount = 0U;
+
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief DMA SPI Tx communication abort callback, when initiated by user
+ * (To be called at end of DMA Tx Abort procedure following user abort request).
+ * @note When this callback is executed, User Abort complete call back is called only if no
+ * Abort still ongoing for Rx DMA Handle.
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ __IO uint32_t count;
+
+ hspi->hdmatx->XferAbortCallback = NULL;
+ count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
+
+ /* Disable Tx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+ /* Wait until TXE flag is set */
+ do
+ {
+ if (count == 0U)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+ break;
+ }
+ count--;
+ } while ((hspi->Instance->SR & SPI_FLAG_TXE) == RESET);
+
+ /* Check if an Abort process is still ongoing */
+ if (hspi->hdmarx != NULL)
+ {
+ if (hspi->hdmarx->XferAbortCallback != NULL)
+ {
+ return;
+ }
+ }
+
+ /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */
+ hspi->RxXferCount = 0U;
+ hspi->TxXferCount = 0U;
+
+ /* Check no error during Abort procedure */
+ if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT)
+ {
+ /* Reset errorCode */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ }
+
+ /* Clear the Error flags in the SR register */
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+
+ /* Restore hspi->State to Ready */
+ hspi->State = HAL_SPI_STATE_READY;
+
+ /* Call user Abort complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->AbortCpltCallback(hspi);
+#else
+ HAL_SPI_AbortCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief DMA SPI Rx communication abort callback, when initiated by user
+ * (To be called at end of DMA Rx Abort procedure following user abort request).
+ * @note When this callback is executed, User Abort complete call back is called only if no
+ * Abort still ongoing for Tx DMA Handle.
+ * @param hdma DMA handle.
+ * @retval None
+ */
+static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+
+ /* Disable SPI Peripheral */
+ __HAL_SPI_DISABLE(hspi);
+
+ hspi->hdmarx->XferAbortCallback = NULL;
+
+ /* Disable Rx DMA Request */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+ /* Check Busy flag */
+ if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+ }
+
+ /* Check if an Abort process is still ongoing */
+ if (hspi->hdmatx != NULL)
+ {
+ if (hspi->hdmatx->XferAbortCallback != NULL)
+ {
+ return;
+ }
+ }
+
+ /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */
+ hspi->RxXferCount = 0U;
+ hspi->TxXferCount = 0U;
+
+ /* Check no error during Abort procedure */
+ if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT)
+ {
+ /* Reset errorCode */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ }
+
+ /* Clear the Error flags in the SR register */
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+
+ /* Restore hspi->State to Ready */
+ hspi->State = HAL_SPI_STATE_READY;
+
+ /* Call user Abort complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->AbortCpltCallback(hspi);
+#else
+ HAL_SPI_AbortCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+}
+
+/**
+ * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in 8bit mode */
+ *hspi->pRxBuffPtr = *((__IO uint8_t *)&hspi->Instance->DR);
+ hspi->pRxBuffPtr++;
+ hspi->RxXferCount--;
+
+ /* Check end of the reception */
+ if (hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_2linesRxISR_8BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable RXNE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ if (hspi->TxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Read 8bit CRC to flush Data Register */
+ READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+
+ /* Disable RXNE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ if (hspi->TxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr++;
+ hspi->TxXferCount--;
+
+ /* Check the end of the transmission */
+ if (hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Set CRC Next Bit to send CRC */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ /* Disable TXE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable TXE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+ if (hspi->RxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+/**
+ * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Receive data in 16 Bit mode */
+ *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR);
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+
+ if (hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_2linesRxISR_16BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+ if (hspi->TxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Read 16bit CRC to flush Data Register */
+ READ_REG(hspi->Instance->DR);
+
+ /* Disable RXNE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+ SPI_CloseRxTx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Transmit data in 16 Bit mode */
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+
+ /* Enable CRC Transmission */
+ if (hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Set CRC Next Bit to send CRC */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ /* Disable TXE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+ return;
+ }
+#endif /* USE_SPI_CRC */
+
+ /* Disable TXE interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+ if (hspi->RxXferCount == 0U)
+ {
+ SPI_CloseRxTx_ISR(hspi);
+ }
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Manage the CRC 8-bit receive in Interrupt context.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Read 8bit CRC to flush Data Register */
+ READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+
+ SPI_CloseRx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Manage the receive 8-bit in Interrupt context.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *hspi->pRxBuffPtr = (*(__IO uint8_t *)&hspi->Instance->DR);
+ hspi->pRxBuffPtr++;
+ hspi->RxXferCount--;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+ /* Check if CRCNEXT is well reseted by hardware */
+ if (READ_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT))
+ {
+ /* Workaround to force CRCNEXT bit to zero in case of CRCNEXT is not reset automatically by hardware */
+ CLEAR_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+
+#endif /* USE_SPI_CRC */
+
+ if (hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_RxISR_8BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseRx_ISR(hspi);
+ }
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Manage the CRC 16-bit receive in Interrupt context.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Read 16bit CRC to flush Data Register */
+ READ_REG(hspi->Instance->DR);
+
+ /* Disable RXNE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ SPI_CloseRx_ISR(hspi);
+}
+#endif /* USE_SPI_CRC */
+
+/**
+ * @brief Manage the 16-bit receive in Interrupt context.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR);
+ hspi->pRxBuffPtr += sizeof(uint16_t);
+ hspi->RxXferCount--;
+
+#if (USE_SPI_CRC != 0U)
+ /* Enable CRC Transmission */
+ if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+ {
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+ /* Check if CRCNEXT is well reseted by hardware */
+ if (READ_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT))
+ {
+ /* Workaround to force CRCNEXT bit to zero in case of CRCNEXT is not reset automatically by hardware */
+ CLEAR_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+
+#endif /* USE_SPI_CRC */
+
+ if (hspi->RxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ hspi->RxISR = SPI_RxISR_16BITCRC;
+ return;
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseRx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle the data 8-bit transmit in Interrupt mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr++;
+ hspi->TxXferCount--;
+
+ if (hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Enable CRC Transmission */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseTx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle the data 16-bit transmit in Interrupt mode.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+ /* Transmit data in 16 Bit mode */
+ hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+ hspi->pTxBuffPtr += sizeof(uint16_t);
+ hspi->TxXferCount--;
+
+ if (hspi->TxXferCount == 0U)
+ {
+#if (USE_SPI_CRC != 0U)
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ /* Enable CRC Transmission */
+ SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+ }
+#endif /* USE_SPI_CRC */
+ SPI_CloseTx_ISR(hspi);
+ }
+}
+
+/**
+ * @brief Handle SPI Communication Timeout.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Flag SPI flag to check
+ * @param State flag state to check
+ * @param Timeout Timeout duration
+ * @param Tickstart tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State,
+ uint32_t Timeout, uint32_t Tickstart)
+{
+ __IO uint32_t count;
+ uint32_t tmp_timeout;
+ uint32_t tmp_tickstart;
+
+ /* Adjust Timeout value in case of end of transfer */
+ tmp_timeout = Timeout - (HAL_GetTick() - Tickstart);
+ tmp_tickstart = HAL_GetTick();
+
+ /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */
+ count = tmp_timeout * ((SystemCoreClock * 32U) >> 20U);
+
+ while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) != State)
+ {
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U))
+ {
+ /* Disable the SPI and reset the CRC: the CRC value should be cleared
+ on both master and slave sides in order to resynchronize the master
+ and slave for their respective CRC calculation */
+
+ /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+ if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ /* Reset CRC Calculation */
+ if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+ {
+ SPI_RESET_CRC(hspi);
+ }
+
+ hspi->State = HAL_SPI_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+
+ return HAL_TIMEOUT;
+ }
+ /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */
+ if(count == 0U)
+ {
+ tmp_timeout = 0U;
+ }
+ count--;
+ }
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle the check of the RX transaction complete.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @param Timeout Timeout duration
+ * @param Tickstart tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart)
+{
+ if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE)
+ || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+ {
+ /* Disable SPI peripheral */
+ __HAL_SPI_DISABLE(hspi);
+ }
+
+ if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))
+ {
+ /* Wait the RXNE reset */
+ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ return HAL_TIMEOUT;
+ }
+ }
+ else
+ {
+ /* Control the BSY flag */
+ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ return HAL_TIMEOUT;
+ }
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle the check of the RXTX or TX transaction complete.
+ * @param hspi SPI handle
+ * @param Timeout Timeout duration
+ * @param Tickstart tick start value
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart)
+{
+ /* Control the BSY flag */
+ if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ return HAL_TIMEOUT;
+ }
+ return HAL_OK;
+}
+
+/**
+ * @brief Handle the end of the RXTX transaction.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi)
+{
+ uint32_t tickstart;
+ __IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
+
+ /* Init tickstart for timeout management */
+ tickstart = HAL_GetTick();
+
+ /* Disable ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+ /* Wait until TXE flag is set */
+ do
+ {
+ if (count == 0U)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ break;
+ }
+ count--;
+ } while ((hspi->Instance->SR & SPI_FLAG_TXE) == RESET);
+
+ /* Check the end of the transaction */
+ if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ /* Check if CRC error is valid or not (workaround to be applied or not) */
+ if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR)
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+
+ /* Reset CRC Calculation */
+ SPI_RESET_CRC(hspi);
+
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+ }
+ else
+ {
+#endif /* USE_SPI_CRC */
+ if (hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+ {
+ if (hspi->State == HAL_SPI_STATE_BUSY_RX)
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Call user Rx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->RxCpltCallback(hspi);
+#else
+ HAL_SPI_RxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Call user TxRx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->TxRxCpltCallback(hspi);
+#else
+ HAL_SPI_TxRxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+ }
+ else
+ {
+ hspi->State = HAL_SPI_STATE_READY;
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+#if (USE_SPI_CRC != 0U)
+ }
+#endif /* USE_SPI_CRC */
+}
+
+/**
+ * @brief Handle the end of the RX transaction.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi)
+{
+ /* Disable RXNE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+
+ /* Check the end of the transaction */
+ if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+ hspi->State = HAL_SPI_STATE_READY;
+
+#if (USE_SPI_CRC != 0U)
+ /* Check if CRC error occurred */
+ if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+ {
+ /* Check if CRC error is valid or not (workaround to be applied or not) */
+ if (SPI_ISCRCErrorValid(hspi) == SPI_VALID_CRC_ERROR)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
+
+ /* Reset CRC Calculation */
+ SPI_RESET_CRC(hspi);
+
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+ }
+ }
+ else
+ {
+#endif /* USE_SPI_CRC */
+ if (hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+ {
+ /* Call user Rx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->RxCpltCallback(hspi);
+#else
+ HAL_SPI_RxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+#if (USE_SPI_CRC != 0U)
+ }
+#endif /* USE_SPI_CRC */
+}
+
+/**
+ * @brief Handle the end of the TX transaction.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi)
+{
+ uint32_t tickstart;
+ __IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
+
+ /* Init tickstart for timeout management*/
+ tickstart = HAL_GetTick();
+
+ /* Wait until TXE flag is set */
+ do
+ {
+ if (count == 0U)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ break;
+ }
+ count--;
+ } while ((hspi->Instance->SR & SPI_FLAG_TXE) == RESET);
+
+ /* Disable TXE and ERR interrupt */
+ __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+
+ /* Check the end of the transaction */
+ if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG);
+ }
+
+ /* Clear overrun flag in 2 Lines communication mode because received is not read */
+ if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
+ {
+ __HAL_SPI_CLEAR_OVRFLAG(hspi);
+ }
+
+ hspi->State = HAL_SPI_STATE_READY;
+ if (hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+ {
+ /* Call user error callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->ErrorCallback(hspi);
+#else
+ HAL_SPI_ErrorCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ /* Call user Rx complete callback */
+#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
+ hspi->TxCpltCallback(hspi);
+#else
+ HAL_SPI_TxCpltCallback(hspi);
+#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
+ }
+}
+
+/**
+ * @brief Handle abort a Rx transaction.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi)
+{
+ __IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
+
+ /* Wait until TXE flag is set */
+ do
+ {
+ if (count == 0U)
+ {
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT);
+ break;
+ }
+ count--;
+ } while ((hspi->Instance->SR & SPI_FLAG_TXE) == RESET);
+
+ /* Disable SPI Peripheral */
+ __HAL_SPI_DISABLE(hspi);
+
+ /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */
+ CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE | SPI_CR2_RXNEIE | SPI_CR2_ERRIE));
+
+ /* Read CRC to flush Data Register */
+ READ_REG(hspi->Instance->DR);
+
+ hspi->State = HAL_SPI_STATE_ABORT;
+}
+
+/**
+ * @brief Handle abort a Tx or Rx/Tx transaction.
+ * @param hspi pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval None
+ */
+static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi)
+{
+ /* Disable TXEIE interrupt */
+ CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE));
+
+ /* Disable SPI Peripheral */
+ __HAL_SPI_DISABLE(hspi);
+
+ hspi->State = HAL_SPI_STATE_ABORT;
+}
+
+#if (USE_SPI_CRC != 0U)
+/**
+ * @brief Checks if encountered CRC error could be corresponding to wrongly detected errors
+ * according to SPI instance, Device type, and revision ID.
+ * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
+ * the configuration information for SPI module.
+ * @retval CRC error validity (SPI_INVALID_CRC_ERROR or SPI_VALID_CRC_ERROR).
+ */
+uint8_t SPI_ISCRCErrorValid(SPI_HandleTypeDef *hspi)
+{
+#if defined(SPI_CRC_ERROR_WORKAROUND_FEATURE) && (USE_SPI_CRC_ERROR_WORKAROUND != 0U)
+ /* Check how to handle this CRC error (workaround to be applied or not) */
+ /* If CRC errors could be wrongly detected (issue 2.15.2 in STM32F10xxC/D/E silicon limitations ES (DocID14732 Rev 13) */
+ if (hspi->Instance == SPI2)
+ {
+ if (hspi->Instance->RXCRCR == 0U)
+ {
+ return (SPI_INVALID_CRC_ERROR);
+ }
+ }
+#endif
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hspi);
+
+ return (SPI_VALID_CRC_ERROR);
+}
+#endif /* USE_SPI_CRC */
+/**
+ * @}
+ */
+
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1