From aa38e5c1f48e31213ee349aa5cd6f06c85bda70d Mon Sep 17 00:00:00 2001
From: android <android@lingyun.com>
Date: Tue, 25 Jun 2024 21:49:39 +0800
Subject: [PATCH] Add GD32F103RCT6 ADC converter board SDK source code
---
mcu_sdk/gd32f103/rk_eFire/Middlewares/Third_Party/FreeRTOS/Source/portable/RVDS/ARM_CM3/portmacro.h | 252 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 252 insertions(+), 0 deletions(-)
diff --git a/mcu_sdk/gd32f103/rk_eFire/Middlewares/Third_Party/FreeRTOS/Source/portable/RVDS/ARM_CM3/portmacro.h b/mcu_sdk/gd32f103/rk_eFire/Middlewares/Third_Party/FreeRTOS/Source/portable/RVDS/ARM_CM3/portmacro.h
new file mode 100644
index 0000000..0101f37
--- /dev/null
+++ b/mcu_sdk/gd32f103/rk_eFire/Middlewares/Third_Party/FreeRTOS/Source/portable/RVDS/ARM_CM3/portmacro.h
@@ -0,0 +1,252 @@
+/*
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR char
+#define portFLOAT float
+#define portDOUBLE double
+#define portLONG long
+#define portSHORT short
+#define portSTACK_TYPE uint32_t
+#define portBASE_TYPE long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+#if( configUSE_16_BIT_TICKS == 1 )
+ typedef uint16_t TickType_t;
+ #define portMAX_DELAY ( TickType_t ) 0xffff
+#else
+ typedef uint32_t TickType_t;
+ #define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+
+ /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+ not need to be guarded with a critical section. */
+ #define portTICK_TYPE_IS_ATOMIC 1
+#endif
+/*-----------------------------------------------------------*/
+
+/* Architecture specifics. */
+#define portSTACK_GROWTH ( -1 )
+#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT 8
+
+/* Constants used with memory barrier intrinsics. */
+#define portSY_FULL_READ_WRITE ( 15 )
+
+/*-----------------------------------------------------------*/
+
+/* Scheduler utilities. */
+#define portYIELD() \
+{ \
+ /* Set a PendSV to request a context switch. */ \
+ portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \
+ \
+ /* Barriers are normally not required but do ensure the code is completely \
+ within the specified behaviour for the architecture. */ \
+ __dsb( portSY_FULL_READ_WRITE ); \
+ __isb( portSY_FULL_READ_WRITE ); \
+}
+/*-----------------------------------------------------------*/
+
+#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
+#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL )
+#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) portYIELD()
+#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
+/*-----------------------------------------------------------*/
+
+/* Critical section management. */
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+
+#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI()
+#define portENABLE_INTERRUPTS() vPortSetBASEPRI( 0 )
+#define portENTER_CRITICAL() vPortEnterCritical()
+#define portEXIT_CRITICAL() vPortExitCritical()
+#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI()
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortSetBASEPRI(x)
+
+/*-----------------------------------------------------------*/
+
+/* Tickless idle/low power functionality. */
+#ifndef portSUPPRESS_TICKS_AND_SLEEP
+ extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
+ #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
+#endif
+/*-----------------------------------------------------------*/
+
+/* Port specific optimisations. */
+#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
+ #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
+#endif
+
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
+
+ /* Check the configuration. */
+ #if( configMAX_PRIORITIES > 32 )
+ #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
+ #endif
+
+ /* Store/clear the ready priorities in a bit map. */
+ #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
+ #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
+
+ /*-----------------------------------------------------------*/
+
+ #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) __clz( ( uxReadyPriorities ) ) )
+
+#endif /* taskRECORD_READY_PRIORITY */
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site. These are
+not necessary for to use this port. They are defined so the common demo files
+(which build with all the ports) will build. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
+/*-----------------------------------------------------------*/
+
+#ifdef configASSERT
+ void vPortValidateInterruptPriority( void );
+ #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority()
+#endif
+
+/* portNOP() is not required by this port. */
+#define portNOP()
+
+#define portINLINE __inline
+
+#ifndef portFORCE_INLINE
+ #define portFORCE_INLINE __forceinline
+#endif
+
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortSetBASEPRI( uint32_t ulBASEPRI )
+{
+ __asm
+ {
+ /* Barrier instructions are not used as this function is only used to
+ lower the BASEPRI value. */
+ msr basepri, ulBASEPRI
+ }
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortRaiseBASEPRI( void )
+{
+uint32_t ulNewBASEPRI = configMAX_SYSCALL_INTERRUPT_PRIORITY;
+
+ __asm
+ {
+ /* Set BASEPRI to the max syscall priority to effect a critical
+ section. */
+ msr basepri, ulNewBASEPRI
+ dsb
+ isb
+ }
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortClearBASEPRIFromISR( void )
+{
+ __asm
+ {
+ /* Set BASEPRI to 0 so no interrupts are masked. This function is only
+ used to lower the mask in an interrupt, so memory barriers are not
+ used. */
+ msr basepri, #0
+ }
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE uint32_t ulPortRaiseBASEPRI( void )
+{
+uint32_t ulReturn, ulNewBASEPRI = configMAX_SYSCALL_INTERRUPT_PRIORITY;
+
+ __asm
+ {
+ /* Set BASEPRI to the max syscall priority to effect a critical
+ section. */
+ mrs ulReturn, basepri
+ msr basepri, ulNewBASEPRI
+ dsb
+ isb
+ }
+
+ return ulReturn;
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE BaseType_t xPortIsInsideInterrupt( void )
+{
+uint32_t ulCurrentInterrupt;
+BaseType_t xReturn;
+
+ /* Obtain the number of the currently executing interrupt. */
+ __asm
+ {
+ mrs ulCurrentInterrupt, ipsr
+ }
+
+ if( ulCurrentInterrupt == 0 )
+ {
+ xReturn = pdFALSE;
+ }
+ else
+ {
+ xReturn = pdTRUE;
+ }
+
+ return xReturn;
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
--
Gitblit v1.9.1