From c4207b25c7e2c90a3cb25af524c17d961face86c Mon Sep 17 00:00:00 2001
From: guowenxue <guowenxue@gmail.com>
Date: Thu, 14 Apr 2022 11:24:28 +0800
Subject: [PATCH] remove space in the end of line
---
booster/comport.c | 42 +++++++++++++++++++++---------------------
1 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/booster/comport.c b/booster/comport.c
index 8f45e45..f6d9d10 100644
--- a/booster/comport.c
+++ b/booster/comport.c
@@ -4,11 +4,11 @@
*
* Filename: cp_comport.c
* Description: It's the comport operate library.
- *
+ *
* Version: 2.0.0(10/17/2018~)
* Author: Guo Wenxue <guowenxue@gmail.com>
* ChangeLog: 1, Release initial version on "10/17/2018 03:33:25 PM"
- *
+ *
********************************************************************************/
#include "comport.h"
@@ -21,10 +21,10 @@
-/*
+/*
* description: Open the serial port
*
- * input args: $comport: corresponding comport point
+ * input args: $comport: corresponding comport point
* $dev_name: The comport device name path, such as '/dev/ttyS3'
* $baudrate: The baudrate, such as 115200
* $settings: The databit,parity,stopbit,flowctrl settings, such as '8N1N'
@@ -80,7 +80,7 @@
goto CleanUp;
}
}
- else
+ else
{
rv = -5;
goto CleanUp;
@@ -88,7 +88,7 @@
if (0 != tcgetattr(comport->fd, &old_cfg))
{
- rv = -6; // Failed to get Com settings
+ rv = -6; // Failed to get Com settings
goto CleanUp;
}
@@ -123,11 +123,11 @@
/* Set the parity */
switch (comport->parity)
{
- case 0x01: // Odd
+ case 0x01: // Odd
new_cfg.c_cflag |= (PARENB | PARODD);
new_cfg.c_cflag |= (INPCK | ISTRIP);
break;
- case 0x02: // Even
+ case 0x02: // Even
new_cfg.c_cflag |= PARENB;
new_cfg.c_cflag &= ~PARODD;;
new_cfg.c_cflag |= (INPCK | ISTRIP);
@@ -153,7 +153,7 @@
/* Set flow control */
switch (comport->flowctrl)
{
- case 1: // Software control
+ case 1: // Software control
case 3:
new_cfg.c_cflag &= ~(CRTSCTS);
new_cfg.c_iflag |= (IXON | IXOFF);
@@ -276,7 +276,7 @@
tcflush(comport->fd, TCIFLUSH);
if (0 != tcsetattr(comport->fd, TCSANOW, &new_cfg))
{
- rv = -7; // Failed to set device com port settings
+ rv = -7; // Failed to set device com port settings
goto CleanUp;
}
@@ -292,8 +292,8 @@
/*
- * description: close comport
- * input args: $comport: corresponding comport point
+ * description: close comport
+ * input args: $comport: corresponding comport point
*/
void comport_close(comport_t *comport)
@@ -355,10 +355,10 @@
{
rv = -4;
goto CleanUp;
- }
+ }
- left_bytes -= rv;
- ptr += rv;
+ left_bytes -= rv;
+ ptr += rv;
}
rv = 0;
@@ -407,21 +407,21 @@
iRet = select(comport->fd + 1, &rdfds, 0, &exfds, &stTime);
if (0 == iRet)
{
- rv = 0;
+ rv = 0;
goto CleanUp;
}
else if (0 < iRet)
{
if (0 != FD_ISSET(comport->fd, &exfds))
{
- rv = -6;
+ rv = -6;
COM_PRINT("Error checking recv status.\n");
goto CleanUp;
}
if (0 == FD_ISSET(comport->fd, &rdfds))
{
- rv = 0;
+ rv = 0;
COM_PRINT("No incoming data.\n");
goto CleanUp;
}
@@ -431,12 +431,12 @@
if (EINTR == errno)
{
COM_PRINT("catch interrupt signal.\n");
- rv = 0;
+ rv = 0;
}
else
{
COM_PRINT("Check recv status failure.\n");
- rv = -7;
+ rv = -7;
}
goto CleanUp;
@@ -480,7 +480,7 @@
/**************************************************************************************
* Description: Set the comport databit,parity,stopbit,flowctrl into the comport structure
* Input Args: comport: the comport_t pointer
- * settings: The databit/parity/stopbit/flowctrl settings as like "8N1N"
+ * settings: The databit/parity/stopbit/flowctrl settings as like "8N1N"
* Output Args: NONE
* Return Value: NONE
*************************************************************************************/
--
Gitblit v1.9.1