From 0fd2ff9f9aca1f30d6b4620f90802223cc221fe0 Mon Sep 17 00:00:00 2001
From: GuoWenxue <“guowenxue@gmail.com”>
Date: Fri, 22 Apr 2022 09:17:24 +0800
Subject: [PATCH] update socket.c for listen socket
---
mqttd/etc/conf.c | 88 ++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 88 insertions(+), 0 deletions(-)
diff --git a/mqttd/etc/conf.c b/mqttd/etc/conf.c
index a32683d..2907a2e 100644
--- a/mqttd/etc/conf.c
+++ b/mqttd/etc/conf.c
@@ -101,6 +101,94 @@
/*+------------------------------------------------------+
+ *| parser hardware module configuration ID |
+ *+------------------------------------------------------+*/
+
+ /* hardware module enable or not */
+ ctx->hwconf.enable=iniparser_getint(ini, "hardware:enable", 0);
+ log_nrml("Parser hardware modules [%s]\n", ctx->hwconf.enable ? "enable" : "disable");
+
+ /* relay control light */
+ ctx->hwconf.relay_pin=iniparser_getint(ini, "hardware:relay_pin", 0);
+ if( !ctx->hwconf.relay_pin )
+ log_nrml("Parser relay module disabled\n");
+ else
+ log_nrml("Parser relay connected wPI #pin number [%d]\n", ctx->hwconf.relay_pin);
+
+ /* buzzer */
+ ctx->hwconf.beep_pin=iniparser_getint(ini, "hardware:beep_pin", 0);
+ log_nrml("Parser buzzer connected wPI #pin number [%d]\n", ctx->hwconf.beep_pin);
+
+ /* Beep max. times set beep 10 */
+ ctx->hwconf.beep_times = iniparser_getint(ini, "hardware:beep_times", 0);
+ log_nrml("Parser inbreak buzzer beep times [%d]\n", ctx->hwconf.beep_times);
+
+
+ /* RGB 3-colors LED */
+ ctx->hwconf.red_pin=iniparser_getint(ini, "hardware:red_pin", 0);
+ ctx->hwconf.green_pin=iniparser_getint(ini, "hardware:green_pin", 0);
+ ctx->hwconf.blue_pin=iniparser_getint(ini, "hardware:blue_pin", 0);
+ if( !ctx->hwconf.red_pin && !ctx->hwconf.green_pin && !ctx->hwconf.blue_pin )
+ {
+ ctx->hwconf.leds = 0;
+ log_nrml("Parser RGB leds module disabled\n");
+ }
+ else
+ {
+ ctx->hwconf.leds = 1;
+ log_nrml("Parser RGB led connected wPI #pin number [%d,%d,%d]\n",
+ ctx->hwconf.red_pin, ctx->hwconf.green_pin, ctx->hwconf.blue_pin);
+ }
+
+ /* temperature sensor ds18b20 */
+ ctx->hwconf.ds18b20=iniparser_getint(ini, "hardware:ds18b20", 0);
+ log_nrml("Parser temperature sensor DS18B20 modules [%s]\n", ctx->hwconf.ds18b20 ? "enable" : "disable");
+
+ /* temperature and hummidity sensor sht2x */
+ ctx->hwconf.sht2x=iniparser_getint(ini, "hardware:sht2x", 0);
+ log_nrml("Parser temperature and hummidity sensor sht2x modules [%s]\n", ctx->hwconf.sht2x ? "enable" : "disable");
+
+ /* light intensity sensor TSL2561 */
+ ctx->hwconf.lux=iniparser_getint(ini, "hardware:lux", 0);
+ log_nrml("Parser light intensity sensor TSL2561 modules [%s]\n", ctx->hwconf.ds18b20 ? "enable" : "disable");
+
+ ctx->hwconf.infrared_pin=iniparser_getint(ini, "hardware:infrared_pin", 0);
+ log_nrml("Parser infrared pin connected wPI #pin number [%d]\n", ctx->hwconf.infrared_pin);
+
+ if( ctx->hwconf.infrared_pin )
+ {
+ ctx->hwconf.inbreak_beep = iniparser_getint(ini, "hardware:inbreak_beep", 0);
+ log_nrml("Parser %s inbreak beep\n", ctx->hwconf.inbreak_beep? "enable" : "disable");
+ if( !ctx->hwconf.beep_pin )
+ {
+ log_warn("WARNNING: beep hardware not enable and will disable inbreak beep\n");
+ ctx->hwconf.inbreak_beep = 0;
+ }
+
+ ctx->hwconf.fillin_light = iniparser_getint(ini, "hardware:fillin_light", 0);
+ log_nrml("Parser inbreak fill-in light mode [%d]\n", ctx->hwconf.fillin_light);
+
+ if( !ctx->hwconf.relay_pin )
+ {
+ log_warn("WARNNING: Relay hardware not enable and change fill-in light mode to OFF\n");
+ ctx->hwconf.fillin_light = FILLIN_LIGHT_OFF;
+ }
+
+ if( !ctx->hwconf.lux )
+ {
+ log_warn("WARNNING: LUX sensor hardware not enable and change fill-in light mode to ON\n");
+ ctx->hwconf.fillin_light = FILLIN_LIGHT_ON;
+ }
+
+ ctx->hwconf.light_intval = iniparser_getint(ini, "hardware:light_intval", 20);
+ log_nrml("Parser inbreak fill-in light interval time [%d]\n", ctx->hwconf.light_intval);
+
+ ctx->hwconf.lux_threshold = iniparser_getdouble(ini, "hardware:lux_threshold", 0.1);
+ log_nrml("Parser fill-in light threshold lux [%.03f]\n", ctx->hwconf.lux_threshold);
+ }
+
+
+ /*+------------------------------------------------------+
*| parser production ID |
*+------------------------------------------------------+*/
--
Gitblit v1.9.1