From 665e1b5cb16d058f478867d0e8a4f8632e2cb02e Mon Sep 17 00:00:00 2001
From: GuoWenxue <“guowenxue@gmail.com”>
Date: Fri, 29 Apr 2022 10:29:19 +0800
Subject: [PATCH] upate packet time to struct tm
---
mqttd/main.c | 185 +++++++++++++++++++++++++++++++++++++--------
1 files changed, 151 insertions(+), 34 deletions(-)
diff --git a/mqttd/main.c b/mqttd/main.c
index 8808585..f021966 100644
--- a/mqttd/main.c
+++ b/mqttd/main.c
@@ -29,6 +29,10 @@
#define PROG_VERSION "v1.0.0"
#define DAEMON_PIDFILE "/tmp/.mqtt.pid"
+#define FLAG_DETECTD (1<<0)
+#define FLAG_RELAYON (1<<1)
+int g_breakin_flag = 0; /* relay already turn on and wait to off */
+
int check_set_program_running(int daemon);
void *mqtt_sub_worker(void *args);
void *mqtt_pub_worker(void *args);
@@ -49,6 +53,16 @@
return;
}
+void turn_light_off(int signum)
+{
+ if( g_breakin_flag&FLAG_RELAYON )
+ {
+ log_nrml("fill-in light timeout and turn light off now\n");
+ turn_relay(OFF);
+ }
+
+ g_breakin_flag = 0;
+}
int main (int argc, char **argv)
{
@@ -61,6 +75,7 @@
int debug = 0;
int opt;
char *progname=NULL;
+ double lux = 0.0;
struct option long_options[] = {
{"conf", required_argument, NULL, 'c'},
@@ -109,19 +124,26 @@
return -2;
}
- if( hal_init() < 0 )
+ if( hal_init(&ctx.hwconf) < 0 )
{
log_err("Initialise hardware failure\n");
- return -1;
+ return -3;
}
- log_nrml("HAL initialise ok\n");
-
+ else
+ {
+ log_nrml("HAL initialise ok\n");
+ }
+
install_proc_signal();
+
+ if( ctx.hwconf.fillin_light )
+ {
+ log_nrml("Install inbreak detected fill-in light off signal\n");
+ signal(SIGALRM, turn_light_off);
+ }
if( check_set_program_running(daemon) < 0 )
goto OUT;
-
- if( !debug )
mosquitto_lib_init();
@@ -139,10 +161,54 @@
}
log_nrml("Start MQTT publisher worker thread ok\n");
-
while( ! g_signal.stop )
{
msleep(1000);
+
+ if( ctx.hwconf.infrared_pin && !g_breakin_flag )
+ {
+ //log_nrml("infrared dected human incoming\n");
+ if( infrared_detect(1000) )
+ {
+ log_nrml("Someone incoming detected by infrared\n");
+ g_breakin_flag |= FLAG_DETECTD;
+
+ /* setup alarm to turn relay off or clear the flag */
+ alarm(ctx.hwconf.light_intval);
+
+ if( ctx.hwconf.inbreak_beep )
+ {
+ turn_beep(ctx.hwconf.beep_times);
+ }
+
+ if( ctx.hwconf.fillin_light==FILLIN_LIGHT_ON && !g_breakin_flag )
+ {
+ log_nrml("Force fill-in light on and will be off in [%d] seconds\n", ctx.hwconf.light_intval);
+ turn_relay(ON);
+ g_breakin_flag |= FLAG_RELAYON;
+ }
+ else if( ctx.hwconf.fillin_light==FILLIN_LIGHT_AUTO && ctx.hwconf.lux )
+ {
+ lux = tsl2561_get_lux();
+ log_nrml("TSL2516 detect illumination intensity %.3flux and threshold %.3flux\n",
+ lux, ctx.hwconf.lux_threshold);
+
+ /* only lux<0.01 will turn on light */
+ if( lux-0.001 > ctx.hwconf.lux_threshold)
+ {
+ log_nrml("Illumination intensity enuf, no need fill-in light\n");
+ }
+ else
+ {
+ log_nrml("Auto fill-in light on and will be off in [%d] seconds\n", ctx.hwconf.light_intval);
+ turn_relay(ON);
+ g_breakin_flag |= FLAG_RELAYON;
+ }
+ }
+
+ }
+
+ }
//log_nrml("Main control thread continue running\n");
}
@@ -153,7 +219,6 @@
return 0;
} /* ----- End of main() ----- */
-
int check_set_program_running(int daemon)
{
@@ -189,7 +254,8 @@
mqtt_ctx_t *ctx = (mqtt_ctx_t *)userdata;
int rv = 0;
char msg[128];
- float temp = 0.0;
+ float temp = 0.0; /* temperature */
+ float rh = 0.0; /* relative humidity */
int retain = 0;
if( result )
@@ -200,22 +266,47 @@
log_nrml("Publisher connect to broker server[%s:%d] successfully\n", ctx->host, ctx->port);
- memset(msg, 0, sizeof(msg));
- if( ds18b20_get_temperature(&temp) < 0 )
- strncpy(msg, "{ \"temp\":\"error\" }", sizeof(msg));
- else
- snprintf(msg, sizeof(msg), "{ \"temp\":\"%.2f\" }", temp);
+ if( ctx->hwconf.ds18b20 )
+ {
+ memset(msg, 0, sizeof(msg));
+
+ if( ds18b20_get_temperature(&temp) < 0 )
+ snprintf(msg, sizeof(msg), "{ \"id\":%s, \"temp\":\"error\" }", ctx->id);
+ else
+ snprintf(msg, sizeof(msg), "{ \"id\":%s, \"temp\":\"%.2f\" }", ctx->id, temp);
- rv = mosquitto_publish(mosq, NULL, ctx->pubTopic, strlen(msg)+1, msg, ctx->pubQos, retain);
- if( rv )
- {
- log_err("Publisher broadcast message '%s' failure: %d\n", msg, rv);
- }
- else
- {
- log_nrml("Publisher broadcast message '%s' ok\n", msg);
+ rv = mosquitto_publish(mosq, NULL, ctx->pubTopic, strlen(msg), msg, ctx->pubQos, retain);
+ if( rv )
+ {
+ log_err("Publisher broadcast message '%s' failure: %d\n", msg, rv);
+ }
+ else
+ {
+ log_nrml("Publisher broadcast message '%s' ok\n", msg);
+ }
}
+ if( ctx->hwconf.sht2x )
+ {
+ memset(msg, 0, sizeof(msg));
+
+ if( sht2x_get_temp_humidity(&temp, &rh) < 0 )
+ snprintf(msg, sizeof(msg), "{ \"id\":%s, \"temp\":\"error\", \"RH\":\"error\" }", ctx->id);
+ else
+ snprintf(msg, sizeof(msg), "{ \"id\":%s, \"temp\":\"%.2f\", \"RH\":\"%.2f\" }", ctx->id, temp, rh);
+
+ rv = mosquitto_publish(mosq, NULL, ctx->pubTopic, strlen(msg), msg, ctx->pubQos, retain);
+ if( rv )
+ {
+ log_err("Publisher broadcast message '%s' failure: %d\n", msg, rv);
+ }
+ else
+ {
+ log_nrml("Publisher broadcast message '%s' ok\n", msg);
+ }
+ }
+
+
log_nrml("Publisher broadcast over and disconnect broker now\n", ctx->host, ctx->port);
mosquitto_disconnect(mosq);
@@ -294,12 +385,13 @@
turn_led(which, OFF);
}
-void proc_json_items(cJSON *root)
+void proc_json_items(cJSON *root, mqtt_ctx_t *ctx)
{
int i;
char *value;
cJSON *item;
cJSON *array;
+ hwconf_t *hwconf = &ctx->hwconf;
if( !root )
{
@@ -316,12 +408,12 @@
/* if item is cJSON_Object, then recursive call proc_json */
if( cJSON_Object == item->type )
{
- proc_json_items(item);
+ proc_json_items(item, ctx);
}
else if( cJSON_Array == item->type )
{
/* RGB colors led control */
- if( !strcasecmp(item->string, "led") )
+ if( hwconf->leds && !strcasecmp(item->string, "led") )
{
array = cJSON_GetArrayItem(item, 0);
if( NULL != array )
@@ -353,7 +445,7 @@
value = cJSON_Print(item);
/* light controled by relay */
- if( !strcasecmp(item->string, "light") )
+ if( hwconf->relay_pin && !strcasecmp(item->string, "light") )
{
if( strcasestr(value, "on") )
{
@@ -368,15 +460,19 @@
}
/* buzzer */
- if( !strcasecmp(item->string, "buzzer") )
+ if( hwconf->beep_pin && !strcasecmp(item->string, "buzzer") )
{
if( strcasestr(value, "on") )
{
- log_nrml("Turn buzzer on\n");
+ turn_passive_beep(ON, BEEP_FREQ);
}
- else if( strcasestr(value, "music") )
+ else if( strcasestr(value, "off") )
{
- log_nrml("Turn buzzer play music\n");
+ turn_passive_beep(OFF, BEEP_FREQ);
+ }
+ else if( strcasestr(value, "music") )
+ {
+ play_little_star();
}
}
@@ -388,8 +484,11 @@
void sub_message_callback(struct mosquitto *mosq, void *userdata, const struct mosquitto_message *message)
{
- cJSON *root = NULL;
- char *out;
+ mqtt_ctx_t *ctx = (mqtt_ctx_t *)userdata;
+
+ cJSON *root = NULL;
+ cJSON *item;
+ char *value;
if ( !message->payloadlen )
@@ -398,7 +497,7 @@
return ;
}
- log_nrml("Subscriber receive message: '%s'\n", message->payload);
+ log_dbg("Subscriber receive message: '%s'\n", message->payload);
root = cJSON_Parse(message->payload);
if( !root )
@@ -407,8 +506,26 @@
return ;
}
- proc_json_items(root);
+ item = cJSON_GetObjectItem(root, "id");
+ if( !item )
+ {
+ log_err("cJSON_Parse get ID failure: %s\n", cJSON_GetErrorPtr());
+ goto OUT;
+ }
+ value = cJSON_PrintUnformatted(item);
+ if( strcasecmp(value, ctx->id) )
+ {
+ free(value);
+ goto OUT;
+ }
+
+ free(value);
+ log_nrml("Subscriber receive message: '%s'\n", message->payload);
+
+ proc_json_items(root, ctx);
+
+OUT:
cJSON_Delete(root); /* must delete it, or it will result memory leak */
return ;
}
--
Gitblit v1.9.1