From 705c9b768db7539205992906aed2911425d43caa Mon Sep 17 00:00:00 2001
From: guowenxue <guowenxue@gmail.com>
Date: Tue, 18 Nov 2025 16:13:04 +0800
Subject: [PATCH] update iniparser to remove warnning
---
project/lightd/hal/ds18b20.c | 118 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 118 insertions(+), 0 deletions(-)
diff --git a/project/lightd/hal/ds18b20.c b/project/lightd/hal/ds18b20.c
new file mode 100644
index 0000000..aa1e01b
--- /dev/null
+++ b/project/lightd/hal/ds18b20.c
@@ -0,0 +1,118 @@
+/*********************************************************************************
+ * Copyright: (C) 2023 LingYun IoT System Studio
+ * All rights reserved.
+ *
+ * Filename: ds18b20.c
+ * Description: This file is temperature sensor DS18B20 code
+ *
+ * Version: 1.0.0(2023/8/10)
+ * Author: Guo Wenxue <guowenxue@gmail.com>
+ * ChangeLog: 1, Release initial version on "2023/8/10 12:13:26"
+ *
+ * Pin connection:
+ *
+ * DS18B20 Module Raspberry Pi Board
+ * VCC <-----> #Pin1(3.3V)
+ * DQ <-----> #Pin7(BCM GPIO4)
+ * GND <-----> GND
+ *
+ * /boot/config.txt:
+ *
+ * dtoverlay=w1-gpio-pullup,gpiopin=4
+ *
+ ********************************************************************************/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <dirent.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+
+#include "logger.h"
+
+/* File Content:
+ pi@raspberrypi:~/guowenxue $ cat /sys/bus/w1/devices/28-041731f7c0ff/w1_slave
+ 3a 01 4b 46 7f ff 0c 10 a5 : crc=a5 YES
+ 3a 01 4b 46 7f ff 0c 10 a5 t=19625
+ */
+
+int ds18b20_get_temperature(float *temp)
+{
+ char w1_path[50] = "/sys/bus/w1/devices/";
+ char chip[20];
+ char buf[128];
+ DIR *dirp;
+ struct dirent *direntp;
+ int fd =-1;
+ char *ptr;
+ int found = 0;
+
+ if( !temp )
+ {
+ return -1;
+ }
+
+ /*+-------------------------------------------------------------------+
+ *| open dierectory /sys/bus/w1/devices to get chipset Serial Number |
+ *+-------------------------------------------------------------------+*/
+ if((dirp = opendir(w1_path)) == NULL)
+ {
+ log_error("opendir error: %s\n", strerror(errno));
+ return -2;
+ }
+
+ while((direntp = readdir(dirp)) != NULL)
+ {
+ if(strstr(direntp->d_name,"28-"))
+ {
+ /* find and get the chipset SN filename */
+ strcpy(chip,direntp->d_name);
+ found = 1;
+ break;
+ }
+ }
+ closedir(dirp);
+
+ if( !found )
+ {
+ log_error("Can not find ds18b20 in %s\n", w1_path);
+ return -3;
+ }
+
+ /* get DS18B20 sample file full path: /sys/bus/w1/devices/28-xxxx/w1_slave */
+ strncat(w1_path, chip, sizeof(w1_path)-strlen(w1_path));
+ strncat(w1_path, "/w1_slave", sizeof(w1_path)-strlen(w1_path));
+
+ /* open file /sys/bus/w1/devices/28-xxxx/w1_slave to get temperature */
+ if( (fd=open(w1_path, O_RDONLY)) < 0 )
+ {
+ log_error("open %s error: %s\n", w1_path, strerror(errno));
+ return -4;
+ }
+
+ if(read(fd, buf, sizeof(buf)) < 0)
+ {
+ log_error("read %s error: %s\n", w1_path, strerror(errno));
+ return -5;
+ }
+
+ ptr = strstr(buf, "t=");
+ if( !ptr )
+ {
+ log_error("ERROR: Can not get temperature\n");
+ return -6;
+ }
+
+ ptr+=2;
+
+ /* convert string value to float value */
+ *temp = atof(ptr)/1000;
+
+ close(fd);
+
+ return 0;
+}
--
Gitblit v1.9.1