From a22d9c106276bb1819e583012d7ea41b6529b318 Mon Sep 17 00:00:00 2001
From: guowenxue <guowenxue@gmail.com>
Date: Wed, 16 May 2018 08:14:05 +0800
Subject: [PATCH] add new LED key systick sample code
---
src/bare_test/4.Systick/stdlib/src/stm32f10x_dac.c | 1142 ++++++++++++++++++++++++++++----------------------------
1 files changed, 571 insertions(+), 571 deletions(-)
diff --git a/src/bare_test/stm32_key/fwlib/src/stm32f10x_dac.c b/src/bare_test/4.Systick/stdlib/src/stm32f10x_dac.c
similarity index 99%
copy from src/bare_test/stm32_key/fwlib/src/stm32f10x_dac.c
copy to src/bare_test/4.Systick/stdlib/src/stm32f10x_dac.c
index 025b8e2..1cfc71d 100644
--- a/src/bare_test/stm32_key/fwlib/src/stm32f10x_dac.c
+++ b/src/bare_test/4.Systick/stdlib/src/stm32f10x_dac.c
@@ -1,571 +1,571 @@
-/**
- ******************************************************************************
- * @file stm32f10x_dac.c
- * @author MCD Application Team
- * @version V3.5.0
- * @date 11-March-2011
- * @brief This file provides all the DAC firmware functions.
- ******************************************************************************
- * @attention
- *
- * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
- * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
- * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
- * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
- * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
- * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
- *
- * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_dac.h"
-#include "stm32f10x_rcc.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Driver
- * @{
- */
-
-/** @defgroup DAC
- * @brief DAC driver modules
- * @{
- */
-
-/** @defgroup DAC_Private_TypesDefinitions
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup DAC_Private_Defines
- * @{
- */
-
-/* CR register Mask */
-#define CR_CLEAR_MASK ((uint32_t)0x00000FFE)
-
-/* DAC Dual Channels SWTRIG masks */
-#define DUAL_SWTRIG_SET ((uint32_t)0x00000003)
-#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC)
-
-/* DHR registers offsets */
-#define DHR12R1_OFFSET ((uint32_t)0x00000008)
-#define DHR12R2_OFFSET ((uint32_t)0x00000014)
-#define DHR12RD_OFFSET ((uint32_t)0x00000020)
-
-/* DOR register offset */
-#define DOR_OFFSET ((uint32_t)0x0000002C)
-/**
- * @}
- */
-
-/** @defgroup DAC_Private_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup DAC_Private_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup DAC_Private_FunctionPrototypes
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup DAC_Private_Functions
- * @{
- */
-
-/**
- * @brief Deinitializes the DAC peripheral registers to their default reset values.
- * @param None
- * @retval None
- */
-void DAC_DeInit(void)
-{
- /* Enable DAC reset state */
- RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
- /* Release DAC from reset state */
- RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);
-}
-
-/**
- * @brief Initializes the DAC peripheral according to the specified
- * parameters in the DAC_InitStruct.
- * @param DAC_Channel: the selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that
- * contains the configuration information for the specified DAC channel.
- * @retval None
- */
-void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
-{
- uint32_t tmpreg1 = 0, tmpreg2 = 0;
- /* Check the DAC parameters */
- assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger));
- assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration));
- assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude));
- assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer));
-/*---------------------------- DAC CR Configuration --------------------------*/
- /* Get the DAC CR value */
- tmpreg1 = DAC->CR;
- /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
- tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
- /* Configure for the selected DAC channel: buffer output, trigger, wave generation,
- mask/amplitude for wave generation */
- /* Set TSELx and TENx bits according to DAC_Trigger value */
- /* Set WAVEx bits according to DAC_WaveGeneration value */
- /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */
- /* Set BOFFx bit according to DAC_OutputBuffer value */
- tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
- DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer);
- /* Calculate CR register value depending on DAC_Channel */
- tmpreg1 |= tmpreg2 << DAC_Channel;
- /* Write to DAC CR */
- DAC->CR = tmpreg1;
-}
-
-/**
- * @brief Fills each DAC_InitStruct member with its default value.
- * @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will
- * be initialized.
- * @retval None
- */
-void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
-{
-/*--------------- Reset DAC init structure parameters values -----------------*/
- /* Initialize the DAC_Trigger member */
- DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
- /* Initialize the DAC_WaveGeneration member */
- DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
- /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */
- DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
- /* Initialize the DAC_OutputBuffer member */
- DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;
-}
-
-/**
- * @brief Enables or disables the specified DAC channel.
- * @param DAC_Channel: the selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @param NewState: new state of the DAC channel.
- * This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(DAC_Channel));
- assert_param(IS_FUNCTIONAL_STATE(NewState));
- if (NewState != DISABLE)
- {
- /* Enable the selected DAC channel */
- DAC->CR |= (DAC_CR_EN1 << DAC_Channel);
- }
- else
- {
- /* Disable the selected DAC channel */
- DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel);
- }
-}
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-/**
- * @brief Enables or disables the specified DAC interrupts.
- * @param DAC_Channel: the selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled.
- * This parameter can be the following values:
- * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
- * @param NewState: new state of the specified DAC interrupts.
- * This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(DAC_Channel));
- assert_param(IS_FUNCTIONAL_STATE(NewState));
- assert_param(IS_DAC_IT(DAC_IT));
-
- if (NewState != DISABLE)
- {
- /* Enable the selected DAC interrupts */
- DAC->CR |= (DAC_IT << DAC_Channel);
- }
- else
- {
- /* Disable the selected DAC interrupts */
- DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel));
- }
-}
-#endif
-
-/**
- * @brief Enables or disables the specified DAC channel DMA request.
- * @param DAC_Channel: the selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @param NewState: new state of the selected DAC channel DMA request.
- * This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(DAC_Channel));
- assert_param(IS_FUNCTIONAL_STATE(NewState));
- if (NewState != DISABLE)
- {
- /* Enable the selected DAC channel DMA request */
- DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel);
- }
- else
- {
- /* Disable the selected DAC channel DMA request */
- DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel);
- }
-}
-
-/**
- * @brief Enables or disables the selected DAC channel software trigger.
- * @param DAC_Channel: the selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @param NewState: new state of the selected DAC channel software trigger.
- * This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(DAC_Channel));
- assert_param(IS_FUNCTIONAL_STATE(NewState));
- if (NewState != DISABLE)
- {
- /* Enable software trigger for the selected DAC channel */
- DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4);
- }
- else
- {
- /* Disable software trigger for the selected DAC channel */
- DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4));
- }
-}
-
-/**
- * @brief Enables or disables simultaneously the two DAC channels software
- * triggers.
- * @param NewState: new state of the DAC channels software triggers.
- * This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
-{
- /* Check the parameters */
- assert_param(IS_FUNCTIONAL_STATE(NewState));
- if (NewState != DISABLE)
- {
- /* Enable software trigger for both DAC channels */
- DAC->SWTRIGR |= DUAL_SWTRIG_SET ;
- }
- else
- {
- /* Disable software trigger for both DAC channels */
- DAC->SWTRIGR &= DUAL_SWTRIG_RESET;
- }
-}
-
-/**
- * @brief Enables or disables the selected DAC channel wave generation.
- * @param DAC_Channel: the selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @param DAC_Wave: Specifies the wave type to enable or disable.
- * This parameter can be one of the following values:
- * @arg DAC_Wave_Noise: noise wave generation
- * @arg DAC_Wave_Triangle: triangle wave generation
- * @param NewState: new state of the selected DAC channel wave generation.
- * This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(DAC_Channel));
- assert_param(IS_DAC_WAVE(DAC_Wave));
- assert_param(IS_FUNCTIONAL_STATE(NewState));
- if (NewState != DISABLE)
- {
- /* Enable the selected wave generation for the selected DAC channel */
- DAC->CR |= DAC_Wave << DAC_Channel;
- }
- else
- {
- /* Disable the selected wave generation for the selected DAC channel */
- DAC->CR &= ~(DAC_Wave << DAC_Channel);
- }
-}
-
-/**
- * @brief Set the specified data holding register value for DAC channel1.
- * @param DAC_Align: Specifies the data alignment for DAC channel1.
- * This parameter can be one of the following values:
- * @arg DAC_Align_8b_R: 8bit right data alignment selected
- * @arg DAC_Align_12b_L: 12bit left data alignment selected
- * @arg DAC_Align_12b_R: 12bit right data alignment selected
- * @param Data : Data to be loaded in the selected data holding register.
- * @retval None
- */
-void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
-{
- __IO uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_DAC_ALIGN(DAC_Align));
- assert_param(IS_DAC_DATA(Data));
-
- tmp = (uint32_t)DAC_BASE;
- tmp += DHR12R1_OFFSET + DAC_Align;
-
- /* Set the DAC channel1 selected data holding register */
- *(__IO uint32_t *) tmp = Data;
-}
-
-/**
- * @brief Set the specified data holding register value for DAC channel2.
- * @param DAC_Align: Specifies the data alignment for DAC channel2.
- * This parameter can be one of the following values:
- * @arg DAC_Align_8b_R: 8bit right data alignment selected
- * @arg DAC_Align_12b_L: 12bit left data alignment selected
- * @arg DAC_Align_12b_R: 12bit right data alignment selected
- * @param Data : Data to be loaded in the selected data holding register.
- * @retval None
- */
-void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
-{
- __IO uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_DAC_ALIGN(DAC_Align));
- assert_param(IS_DAC_DATA(Data));
-
- tmp = (uint32_t)DAC_BASE;
- tmp += DHR12R2_OFFSET + DAC_Align;
-
- /* Set the DAC channel2 selected data holding register */
- *(__IO uint32_t *)tmp = Data;
-}
-
-/**
- * @brief Set the specified data holding register value for dual channel
- * DAC.
- * @param DAC_Align: Specifies the data alignment for dual channel DAC.
- * This parameter can be one of the following values:
- * @arg DAC_Align_8b_R: 8bit right data alignment selected
- * @arg DAC_Align_12b_L: 12bit left data alignment selected
- * @arg DAC_Align_12b_R: 12bit right data alignment selected
- * @param Data2: Data for DAC Channel2 to be loaded in the selected data
- * holding register.
- * @param Data1: Data for DAC Channel1 to be loaded in the selected data
- * holding register.
- * @retval None
- */
-void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
-{
- uint32_t data = 0, tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_DAC_ALIGN(DAC_Align));
- assert_param(IS_DAC_DATA(Data1));
- assert_param(IS_DAC_DATA(Data2));
-
- /* Calculate and set dual DAC data holding register value */
- if (DAC_Align == DAC_Align_8b_R)
- {
- data = ((uint32_t)Data2 << 8) | Data1;
- }
- else
- {
- data = ((uint32_t)Data2 << 16) | Data1;
- }
-
- tmp = (uint32_t)DAC_BASE;
- tmp += DHR12RD_OFFSET + DAC_Align;
-
- /* Set the dual DAC selected data holding register */
- *(__IO uint32_t *)tmp = data;
-}
-
-/**
- * @brief Returns the last data output value of the selected DAC channel.
- * @param DAC_Channel: the selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @retval The selected DAC channel data output value.
- */
-uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel)
-{
- __IO uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(DAC_Channel));
-
- tmp = (uint32_t) DAC_BASE ;
- tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2);
-
- /* Returns the DAC channel data output register value */
- return (uint16_t) (*(__IO uint32_t*) tmp);
-}
-
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-/**
- * @brief Checks whether the specified DAC flag is set or not.
- * @param DAC_Channel: thee selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @param DAC_FLAG: specifies the flag to check.
- * This parameter can be only of the following value:
- * @arg DAC_FLAG_DMAUDR: DMA underrun flag
- * @retval The new state of DAC_FLAG (SET or RESET).
- */
-FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG)
-{
- FlagStatus bitstatus = RESET;
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(DAC_Channel));
- assert_param(IS_DAC_FLAG(DAC_FLAG));
-
- /* Check the status of the specified DAC flag */
- if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET)
- {
- /* DAC_FLAG is set */
- bitstatus = SET;
- }
- else
- {
- /* DAC_FLAG is reset */
- bitstatus = RESET;
- }
- /* Return the DAC_FLAG status */
- return bitstatus;
-}
-
-/**
- * @brief Clears the DAC channelx's pending flags.
- * @param DAC_Channel: the selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @param DAC_FLAG: specifies the flag to clear.
- * This parameter can be of the following value:
- * @arg DAC_FLAG_DMAUDR: DMA underrun flag
- * @retval None
- */
-void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(DAC_Channel));
- assert_param(IS_DAC_FLAG(DAC_FLAG));
-
- /* Clear the selected DAC flags */
- DAC->SR = (DAC_FLAG << DAC_Channel);
-}
-
-/**
- * @brief Checks whether the specified DAC interrupt has occurred or not.
- * @param DAC_Channel: the selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @param DAC_IT: specifies the DAC interrupt source to check.
- * This parameter can be the following values:
- * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
- * @retval The new state of DAC_IT (SET or RESET).
- */
-ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT)
-{
- ITStatus bitstatus = RESET;
- uint32_t enablestatus = 0;
-
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(DAC_Channel));
- assert_param(IS_DAC_IT(DAC_IT));
-
- /* Get the DAC_IT enable bit status */
- enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ;
-
- /* Check the status of the specified DAC interrupt */
- if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus)
- {
- /* DAC_IT is set */
- bitstatus = SET;
- }
- else
- {
- /* DAC_IT is reset */
- bitstatus = RESET;
- }
- /* Return the DAC_IT status */
- return bitstatus;
-}
-
-/**
- * @brief Clears the DAC channelx's interrupt pending bits.
- * @param DAC_Channel: the selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_Channel_1: DAC Channel1 selected
- * @arg DAC_Channel_2: DAC Channel2 selected
- * @param DAC_IT: specifies the DAC interrupt pending bit to clear.
- * This parameter can be the following values:
- * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
- * @retval None
- */
-void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(DAC_Channel));
- assert_param(IS_DAC_IT(DAC_IT));
-
- /* Clear the selected DAC interrupt pending bits */
- DAC->SR = (DAC_IT << DAC_Channel);
-}
-#endif
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file stm32f10x_dac.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the DAC firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dac.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup DAC
+ * @brief DAC driver modules
+ * @{
+ */
+
+/** @defgroup DAC_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Defines
+ * @{
+ */
+
+/* CR register Mask */
+#define CR_CLEAR_MASK ((uint32_t)0x00000FFE)
+
+/* DAC Dual Channels SWTRIG masks */
+#define DUAL_SWTRIG_SET ((uint32_t)0x00000003)
+#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC)
+
+/* DHR registers offsets */
+#define DHR12R1_OFFSET ((uint32_t)0x00000008)
+#define DHR12R2_OFFSET ((uint32_t)0x00000014)
+#define DHR12RD_OFFSET ((uint32_t)0x00000020)
+
+/* DOR register offset */
+#define DOR_OFFSET ((uint32_t)0x0000002C)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the DAC peripheral registers to their default reset values.
+ * @param None
+ * @retval None
+ */
+void DAC_DeInit(void)
+{
+ /* Enable DAC reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
+ /* Release DAC from reset state */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);
+}
+
+/**
+ * @brief Initializes the DAC peripheral according to the specified
+ * parameters in the DAC_InitStruct.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that
+ * contains the configuration information for the specified DAC channel.
+ * @retval None
+ */
+void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
+{
+ uint32_t tmpreg1 = 0, tmpreg2 = 0;
+ /* Check the DAC parameters */
+ assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger));
+ assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration));
+ assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude));
+ assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer));
+/*---------------------------- DAC CR Configuration --------------------------*/
+ /* Get the DAC CR value */
+ tmpreg1 = DAC->CR;
+ /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+ tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
+ /* Configure for the selected DAC channel: buffer output, trigger, wave generation,
+ mask/amplitude for wave generation */
+ /* Set TSELx and TENx bits according to DAC_Trigger value */
+ /* Set WAVEx bits according to DAC_WaveGeneration value */
+ /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */
+ /* Set BOFFx bit according to DAC_OutputBuffer value */
+ tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
+ DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer);
+ /* Calculate CR register value depending on DAC_Channel */
+ tmpreg1 |= tmpreg2 << DAC_Channel;
+ /* Write to DAC CR */
+ DAC->CR = tmpreg1;
+}
+
+/**
+ * @brief Fills each DAC_InitStruct member with its default value.
+ * @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
+{
+/*--------------- Reset DAC init structure parameters values -----------------*/
+ /* Initialize the DAC_Trigger member */
+ DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
+ /* Initialize the DAC_WaveGeneration member */
+ DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
+ /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */
+ DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
+ /* Initialize the DAC_OutputBuffer member */
+ DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;
+}
+
+/**
+ * @brief Enables or disables the specified DAC channel.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the DAC channel.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC channel */
+ DAC->CR |= (DAC_CR_EN1 << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC channel */
+ DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel);
+ }
+}
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/**
+ * @brief Enables or disables the specified DAC interrupts.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @param NewState: new state of the specified DAC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC interrupts */
+ DAC->CR |= (DAC_IT << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC interrupts */
+ DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel));
+ }
+}
+#endif
+
+/**
+ * @brief Enables or disables the specified DAC channel DMA request.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the selected DAC channel DMA request.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected DAC channel DMA request */
+ DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel);
+ }
+ else
+ {
+ /* Disable the selected DAC channel DMA request */
+ DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel);
+ }
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel software trigger.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param NewState: new state of the selected DAC channel software trigger.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable software trigger for the selected DAC channel */
+ DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4);
+ }
+ else
+ {
+ /* Disable software trigger for the selected DAC channel */
+ DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4));
+ }
+}
+
+/**
+ * @brief Enables or disables simultaneously the two DAC channels software
+ * triggers.
+ * @param NewState: new state of the DAC channels software triggers.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable software trigger for both DAC channels */
+ DAC->SWTRIGR |= DUAL_SWTRIG_SET ;
+ }
+ else
+ {
+ /* Disable software trigger for both DAC channels */
+ DAC->SWTRIGR &= DUAL_SWTRIG_RESET;
+ }
+}
+
+/**
+ * @brief Enables or disables the selected DAC channel wave generation.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_Wave: Specifies the wave type to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg DAC_Wave_Noise: noise wave generation
+ * @arg DAC_Wave_Triangle: triangle wave generation
+ * @param NewState: new state of the selected DAC channel wave generation.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_WAVE(DAC_Wave));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected wave generation for the selected DAC channel */
+ DAC->CR |= DAC_Wave << DAC_Channel;
+ }
+ else
+ {
+ /* Disable the selected wave generation for the selected DAC channel */
+ DAC->CR &= ~(DAC_Wave << DAC_Channel);
+ }
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel1.
+ * @param DAC_Align: Specifies the data alignment for DAC channel1.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data : Data to be loaded in the selected data holding register.
+ * @retval None
+ */
+void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12R1_OFFSET + DAC_Align;
+
+ /* Set the DAC channel1 selected data holding register */
+ *(__IO uint32_t *) tmp = Data;
+}
+
+/**
+ * @brief Set the specified data holding register value for DAC channel2.
+ * @param DAC_Align: Specifies the data alignment for DAC channel2.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data : Data to be loaded in the selected data holding register.
+ * @retval None
+ */
+void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data));
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12R2_OFFSET + DAC_Align;
+
+ /* Set the DAC channel2 selected data holding register */
+ *(__IO uint32_t *)tmp = Data;
+}
+
+/**
+ * @brief Set the specified data holding register value for dual channel
+ * DAC.
+ * @param DAC_Align: Specifies the data alignment for dual channel DAC.
+ * This parameter can be one of the following values:
+ * @arg DAC_Align_8b_R: 8bit right data alignment selected
+ * @arg DAC_Align_12b_L: 12bit left data alignment selected
+ * @arg DAC_Align_12b_R: 12bit right data alignment selected
+ * @param Data2: Data for DAC Channel2 to be loaded in the selected data
+ * holding register.
+ * @param Data1: Data for DAC Channel1 to be loaded in the selected data
+ * holding register.
+ * @retval None
+ */
+void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
+{
+ uint32_t data = 0, tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_ALIGN(DAC_Align));
+ assert_param(IS_DAC_DATA(Data1));
+ assert_param(IS_DAC_DATA(Data2));
+
+ /* Calculate and set dual DAC data holding register value */
+ if (DAC_Align == DAC_Align_8b_R)
+ {
+ data = ((uint32_t)Data2 << 8) | Data1;
+ }
+ else
+ {
+ data = ((uint32_t)Data2 << 16) | Data1;
+ }
+
+ tmp = (uint32_t)DAC_BASE;
+ tmp += DHR12RD_OFFSET + DAC_Align;
+
+ /* Set the dual DAC selected data holding register */
+ *(__IO uint32_t *)tmp = data;
+}
+
+/**
+ * @brief Returns the last data output value of the selected DAC channel.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @retval The selected DAC channel data output value.
+ */
+uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel)
+{
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+
+ tmp = (uint32_t) DAC_BASE ;
+ tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2);
+
+ /* Returns the DAC channel data output register value */
+ return (uint16_t) (*(__IO uint32_t*) tmp);
+}
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/**
+ * @brief Checks whether the specified DAC flag is set or not.
+ * @param DAC_Channel: thee selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_FLAG: specifies the flag to check.
+ * This parameter can be only of the following value:
+ * @arg DAC_FLAG_DMAUDR: DMA underrun flag
+ * @retval The new state of DAC_FLAG (SET or RESET).
+ */
+FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_FLAG(DAC_FLAG));
+
+ /* Check the status of the specified DAC flag */
+ if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET)
+ {
+ /* DAC_FLAG is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DAC_FLAG is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DAC_FLAG status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DAC channelx's pending flags.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_FLAG: specifies the flag to clear.
+ * This parameter can be of the following value:
+ * @arg DAC_FLAG_DMAUDR: DMA underrun flag
+ * @retval None
+ */
+void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_FLAG(DAC_FLAG));
+
+ /* Clear the selected DAC flags */
+ DAC->SR = (DAC_FLAG << DAC_Channel);
+}
+
+/**
+ * @brief Checks whether the specified DAC interrupt has occurred or not.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt source to check.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @retval The new state of DAC_IT (SET or RESET).
+ */
+ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint32_t enablestatus = 0;
+
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ /* Get the DAC_IT enable bit status */
+ enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ;
+
+ /* Check the status of the specified DAC interrupt */
+ if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus)
+ {
+ /* DAC_IT is set */
+ bitstatus = SET;
+ }
+ else
+ {
+ /* DAC_IT is reset */
+ bitstatus = RESET;
+ }
+ /* Return the DAC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the DAC channelx's interrupt pending bits.
+ * @param DAC_Channel: the selected DAC channel.
+ * This parameter can be one of the following values:
+ * @arg DAC_Channel_1: DAC Channel1 selected
+ * @arg DAC_Channel_2: DAC Channel2 selected
+ * @param DAC_IT: specifies the DAC interrupt pending bit to clear.
+ * This parameter can be the following values:
+ * @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
+ * @retval None
+ */
+void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_DAC_CHANNEL(DAC_Channel));
+ assert_param(IS_DAC_IT(DAC_IT));
+
+ /* Clear the selected DAC interrupt pending bits */
+ DAC->SR = (DAC_IT << DAC_Channel);
+}
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1