From a22d9c106276bb1819e583012d7ea41b6529b318 Mon Sep 17 00:00:00 2001
From: guowenxue <guowenxue@gmail.com>
Date: Wed, 16 May 2018 08:14:05 +0800
Subject: [PATCH] add new LED key systick sample code
---
src/bare_test/4.Systick/stdlib/src/stm32f10x_flash.c | 3368 +++++++++++++++++++++++++++++-----------------------------
1 files changed, 1,684 insertions(+), 1,684 deletions(-)
diff --git a/src/bare_test/stm32_key/fwlib/src/stm32f10x_flash.c b/src/bare_test/4.Systick/stdlib/src/stm32f10x_flash.c
similarity index 99%
copy from src/bare_test/stm32_key/fwlib/src/stm32f10x_flash.c
copy to src/bare_test/4.Systick/stdlib/src/stm32f10x_flash.c
index f6c7bf1..cdff9e9 100644
--- a/src/bare_test/stm32_key/fwlib/src/stm32f10x_flash.c
+++ b/src/bare_test/4.Systick/stdlib/src/stm32f10x_flash.c
@@ -1,1684 +1,1684 @@
-/**
- ******************************************************************************
- * @file stm32f10x_flash.c
- * @author MCD Application Team
- * @version V3.5.0
- * @date 11-March-2011
- * @brief This file provides all the FLASH firmware functions.
- ******************************************************************************
- * @attention
- *
- * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
- * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
- * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
- * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
- * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
- * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
- *
- * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_flash.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Driver
- * @{
- */
-
-/** @defgroup FLASH
- * @brief FLASH driver modules
- * @{
- */
-
-/** @defgroup FLASH_Private_TypesDefinitions
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup FLASH_Private_Defines
- * @{
- */
-
-/* Flash Access Control Register bits */
-#define ACR_LATENCY_Mask ((uint32_t)0x00000038)
-#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7)
-#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF)
-
-/* Flash Access Control Register bits */
-#define ACR_PRFTBS_Mask ((uint32_t)0x00000020)
-
-/* Flash Control Register bits */
-#define CR_PG_Set ((uint32_t)0x00000001)
-#define CR_PG_Reset ((uint32_t)0x00001FFE)
-#define CR_PER_Set ((uint32_t)0x00000002)
-#define CR_PER_Reset ((uint32_t)0x00001FFD)
-#define CR_MER_Set ((uint32_t)0x00000004)
-#define CR_MER_Reset ((uint32_t)0x00001FFB)
-#define CR_OPTPG_Set ((uint32_t)0x00000010)
-#define CR_OPTPG_Reset ((uint32_t)0x00001FEF)
-#define CR_OPTER_Set ((uint32_t)0x00000020)
-#define CR_OPTER_Reset ((uint32_t)0x00001FDF)
-#define CR_STRT_Set ((uint32_t)0x00000040)
-#define CR_LOCK_Set ((uint32_t)0x00000080)
-
-/* FLASH Mask */
-#define RDPRT_Mask ((uint32_t)0x00000002)
-#define WRP0_Mask ((uint32_t)0x000000FF)
-#define WRP1_Mask ((uint32_t)0x0000FF00)
-#define WRP2_Mask ((uint32_t)0x00FF0000)
-#define WRP3_Mask ((uint32_t)0xFF000000)
-#define OB_USER_BFB2 ((uint16_t)0x0008)
-
-/* FLASH Keys */
-#define RDP_Key ((uint16_t)0x00A5)
-#define FLASH_KEY1 ((uint32_t)0x45670123)
-#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
-
-/* FLASH BANK address */
-#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF)
-
-/* Delay definition */
-#define EraseTimeout ((uint32_t)0x000B0000)
-#define ProgramTimeout ((uint32_t)0x00002000)
-/**
- * @}
- */
-
-/** @defgroup FLASH_Private_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup FLASH_Private_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup FLASH_Private_FunctionPrototypes
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup FLASH_Private_Functions
- * @{
- */
-
-/**
-@code
-
- This driver provides functions to configure and program the Flash memory of all STM32F10x devices,
- including the latest STM32F10x_XL density devices.
-
- STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability:
- - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each)
- - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each)
- While other STM32F10x devices features only one bank with memory up to 512 Kbytes.
-
- In version V3.3.0, some functions were updated and new ones were added to support
- STM32F10x_XL devices. Thus some functions manages all devices, while other are
- dedicated for XL devices only.
-
- The table below presents the list of available functions depending on the used STM32F10x devices.
-
- ***************************************************
- * Legacy functions used for all STM32F10x devices *
- ***************************************************
- +----------------------------------------------------------------------------------------------------------------------------------+
- | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
- | | devices | devices | |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_SetLatency | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_HalfCycleAccessCmd | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_PrefetchBufferCmd | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. |
- | | | | - For other devices: unlock Bank1 and it is equivalent |
- | | | | to FLASH_UnlockBank1 function. |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. |
- | | | | - For other devices: lock Bank1 and it is equivalent |
- | | | | to FLASH_LockBank1 function. |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 |
- | | | | - For other devices: erase a page in Bank1 |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 |
- | | | | - For other devices: erase all pages in Bank1 |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_EraseOptionBytes | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_ProgramOptionByteData | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_EnableWriteProtection | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_ReadOutProtection | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_UserOptionByteConfig | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_GetUserOptionByte | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_GetReadOutProtectionStatus | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_GetPrefetchBufferStatus | Yes | Yes | No change |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts|
- | | | | - For other devices: enable Bank1's interrupts |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status|
- | | | | - For other devices: return Bank1's flag status |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag |
- | | | | - For other devices: clear Bank1's flag |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) |
- | | | | equivalent to FLASH_GetBank1Status function |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) |
- | | | | equivalent to: FLASH_WaitForLastBank1Operation function |
- +----------------------------------------------------------------------------------------------------------------------------------+
-
- ************************************************************************************************************************
- * New functions used for all STM32F10x devices to manage Bank1: *
- * - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 *
- * - For other devices, these functions are optional (covered by functions listed above) *
- ************************************************************************************************************************
- +----------------------------------------------------------------------------------------------------------------------------------+
- | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
- | | devices | devices | |
- |----------------------------------------------------------------------------------------------------------------------------------|
- | FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_LockBank1 | Yes | Yes | - Lock Bank1 |
- |----------------------------------------------------------------------------------------------------------------------------------|
- | FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 |
- |----------------------------------------------------------------------------------------------------------------------------------|
- | FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 |
- |----------------------------------------------------------------------------------------------------------------------------------|
- | FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation |
- +----------------------------------------------------------------------------------------------------------------------------------+
-
- *****************************************************************************
- * New Functions used only with STM32F10x_XL density devices to manage Bank2 *
- *****************************************************************************
- +----------------------------------------------------------------------------------------------------------------------------------+
- | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
- | | devices | devices | |
- |----------------------------------------------------------------------------------------------------------------------------------|
- | FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 |
- |----------------------------------------------------------------------------------------------------------------------------------|
- |FLASH_LockBank2 | Yes | No | - Lock Bank2 |
- |----------------------------------------------------------------------------------------------------------------------------------|
- | FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 |
- |----------------------------------------------------------------------------------------------------------------------------------|
- | FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 |
- |----------------------------------------------------------------------------------------------------------------------------------|
- | FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation |
- |----------------------------------------------------------------------------------------------------------------------------------|
- | FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 |
- +----------------------------------------------------------------------------------------------------------------------------------+
-@endcode
-*/
-
-
-/**
- * @brief Sets the code latency value.
- * @note This function can be used for all STM32F10x devices.
- * @param FLASH_Latency: specifies the FLASH Latency value.
- * This parameter can be one of the following values:
- * @arg FLASH_Latency_0: FLASH Zero Latency cycle
- * @arg FLASH_Latency_1: FLASH One Latency cycle
- * @arg FLASH_Latency_2: FLASH Two Latency cycles
- * @retval None
- */
-void FLASH_SetLatency(uint32_t FLASH_Latency)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_FLASH_LATENCY(FLASH_Latency));
-
- /* Read the ACR register */
- tmpreg = FLASH->ACR;
-
- /* Sets the Latency value */
- tmpreg &= ACR_LATENCY_Mask;
- tmpreg |= FLASH_Latency;
-
- /* Write the ACR register */
- FLASH->ACR = tmpreg;
-}
-
-/**
- * @brief Enables or disables the Half cycle flash access.
- * @note This function can be used for all STM32F10x devices.
- * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode.
- * This parameter can be one of the following values:
- * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable
- * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable
- * @retval None
- */
-void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess)
-{
- /* Check the parameters */
- assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess));
-
- /* Enable or disable the Half cycle access */
- FLASH->ACR &= ACR_HLFCYA_Mask;
- FLASH->ACR |= FLASH_HalfCycleAccess;
-}
-
-/**
- * @brief Enables or disables the Prefetch Buffer.
- * @note This function can be used for all STM32F10x devices.
- * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status.
- * This parameter can be one of the following values:
- * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable
- * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable
- * @retval None
- */
-void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer)
-{
- /* Check the parameters */
- assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer));
-
- /* Enable or disable the Prefetch Buffer */
- FLASH->ACR &= ACR_PRFTBE_Mask;
- FLASH->ACR |= FLASH_PrefetchBuffer;
-}
-
-/**
- * @brief Unlocks the FLASH Program Erase Controller.
- * @note This function can be used for all STM32F10x devices.
- * - For STM32F10X_XL devices this function unlocks Bank1 and Bank2.
- * - For all other devices it unlocks Bank1 and it is equivalent
- * to FLASH_UnlockBank1 function..
- * @param None
- * @retval None
- */
-void FLASH_Unlock(void)
-{
- /* Authorize the FPEC of Bank1 Access */
- FLASH->KEYR = FLASH_KEY1;
- FLASH->KEYR = FLASH_KEY2;
-
-#ifdef STM32F10X_XL
- /* Authorize the FPEC of Bank2 Access */
- FLASH->KEYR2 = FLASH_KEY1;
- FLASH->KEYR2 = FLASH_KEY2;
-#endif /* STM32F10X_XL */
-}
-/**
- * @brief Unlocks the FLASH Bank1 Program Erase Controller.
- * @note This function can be used for all STM32F10x devices.
- * - For STM32F10X_XL devices this function unlocks Bank1.
- * - For all other devices it unlocks Bank1 and it is
- * equivalent to FLASH_Unlock function.
- * @param None
- * @retval None
- */
-void FLASH_UnlockBank1(void)
-{
- /* Authorize the FPEC of Bank1 Access */
- FLASH->KEYR = FLASH_KEY1;
- FLASH->KEYR = FLASH_KEY2;
-}
-
-#ifdef STM32F10X_XL
-/**
- * @brief Unlocks the FLASH Bank2 Program Erase Controller.
- * @note This function can be used only for STM32F10X_XL density devices.
- * @param None
- * @retval None
- */
-void FLASH_UnlockBank2(void)
-{
- /* Authorize the FPEC of Bank2 Access */
- FLASH->KEYR2 = FLASH_KEY1;
- FLASH->KEYR2 = FLASH_KEY2;
-
-}
-#endif /* STM32F10X_XL */
-
-/**
- * @brief Locks the FLASH Program Erase Controller.
- * @note This function can be used for all STM32F10x devices.
- * - For STM32F10X_XL devices this function Locks Bank1 and Bank2.
- * - For all other devices it Locks Bank1 and it is equivalent
- * to FLASH_LockBank1 function.
- * @param None
- * @retval None
- */
-void FLASH_Lock(void)
-{
- /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
- FLASH->CR |= CR_LOCK_Set;
-
-#ifdef STM32F10X_XL
- /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
- FLASH->CR2 |= CR_LOCK_Set;
-#endif /* STM32F10X_XL */
-}
-
-/**
- * @brief Locks the FLASH Bank1 Program Erase Controller.
- * @note this function can be used for all STM32F10x devices.
- * - For STM32F10X_XL devices this function Locks Bank1.
- * - For all other devices it Locks Bank1 and it is equivalent
- * to FLASH_Lock function.
- * @param None
- * @retval None
- */
-void FLASH_LockBank1(void)
-{
- /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
- FLASH->CR |= CR_LOCK_Set;
-}
-
-#ifdef STM32F10X_XL
-/**
- * @brief Locks the FLASH Bank2 Program Erase Controller.
- * @note This function can be used only for STM32F10X_XL density devices.
- * @param None
- * @retval None
- */
-void FLASH_LockBank2(void)
-{
- /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
- FLASH->CR2 |= CR_LOCK_Set;
-}
-#endif /* STM32F10X_XL */
-
-/**
- * @brief Erases a specified FLASH page.
- * @note This function can be used for all STM32F10x devices.
- * @param Page_Address: The page address to be erased.
- * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
-{
- FLASH_Status status = FLASH_COMPLETE;
- /* Check the parameters */
- assert_param(IS_FLASH_ADDRESS(Page_Address));
-
-#ifdef STM32F10X_XL
- if(Page_Address < FLASH_BANK1_END_ADDRESS)
- {
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank1Operation(EraseTimeout);
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to erase the page */
- FLASH->CR|= CR_PER_Set;
- FLASH->AR = Page_Address;
- FLASH->CR|= CR_STRT_Set;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-
- /* Disable the PER Bit */
- FLASH->CR &= CR_PER_Reset;
- }
- }
- else
- {
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(EraseTimeout);
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to erase the page */
- FLASH->CR2|= CR_PER_Set;
- FLASH->AR2 = Page_Address;
- FLASH->CR2|= CR_STRT_Set;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(EraseTimeout);
-
- /* Disable the PER Bit */
- FLASH->CR2 &= CR_PER_Reset;
- }
- }
-#else
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(EraseTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to erase the page */
- FLASH->CR|= CR_PER_Set;
- FLASH->AR = Page_Address;
- FLASH->CR|= CR_STRT_Set;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(EraseTimeout);
-
- /* Disable the PER Bit */
- FLASH->CR &= CR_PER_Reset;
- }
-#endif /* STM32F10X_XL */
-
- /* Return the Erase Status */
- return status;
-}
-
-/**
- * @brief Erases all FLASH pages.
- * @note This function can be used for all STM32F10x devices.
- * @param None
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_EraseAllPages(void)
-{
- FLASH_Status status = FLASH_COMPLETE;
-
-#ifdef STM32F10X_XL
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to erase all pages */
- FLASH->CR |= CR_MER_Set;
- FLASH->CR |= CR_STRT_Set;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-
- /* Disable the MER Bit */
- FLASH->CR &= CR_MER_Reset;
- }
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to erase all pages */
- FLASH->CR2 |= CR_MER_Set;
- FLASH->CR2 |= CR_STRT_Set;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(EraseTimeout);
-
- /* Disable the MER Bit */
- FLASH->CR2 &= CR_MER_Reset;
- }
-#else
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(EraseTimeout);
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to erase all pages */
- FLASH->CR |= CR_MER_Set;
- FLASH->CR |= CR_STRT_Set;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(EraseTimeout);
-
- /* Disable the MER Bit */
- FLASH->CR &= CR_MER_Reset;
- }
-#endif /* STM32F10X_XL */
-
- /* Return the Erase Status */
- return status;
-}
-
-/**
- * @brief Erases all Bank1 FLASH pages.
- * @note This function can be used for all STM32F10x devices.
- * - For STM32F10X_XL devices this function erases all Bank1 pages.
- * - For all other devices it erases all Bank1 pages and it is equivalent
- * to FLASH_EraseAllPages function.
- * @param None
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_EraseAllBank1Pages(void)
-{
- FLASH_Status status = FLASH_COMPLETE;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to erase all pages */
- FLASH->CR |= CR_MER_Set;
- FLASH->CR |= CR_STRT_Set;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank1Operation(EraseTimeout);
-
- /* Disable the MER Bit */
- FLASH->CR &= CR_MER_Reset;
- }
- /* Return the Erase Status */
- return status;
-}
-
-#ifdef STM32F10X_XL
-/**
- * @brief Erases all Bank2 FLASH pages.
- * @note This function can be used only for STM32F10x_XL density devices.
- * @param None
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_EraseAllBank2Pages(void)
-{
- FLASH_Status status = FLASH_COMPLETE;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(EraseTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to erase all pages */
- FLASH->CR2 |= CR_MER_Set;
- FLASH->CR2 |= CR_STRT_Set;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(EraseTimeout);
-
- /* Disable the MER Bit */
- FLASH->CR2 &= CR_MER_Reset;
- }
- /* Return the Erase Status */
- return status;
-}
-#endif /* STM32F10X_XL */
-
-/**
- * @brief Erases the FLASH option bytes.
- * @note This functions erases all option bytes except the Read protection (RDP).
- * @note This function can be used for all STM32F10x devices.
- * @param None
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_EraseOptionBytes(void)
-{
- uint16_t rdptmp = RDP_Key;
-
- FLASH_Status status = FLASH_COMPLETE;
-
- /* Get the actual read protection Option Byte value */
- if(FLASH_GetReadOutProtectionStatus() != RESET)
- {
- rdptmp = 0x00;
- }
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(EraseTimeout);
- if(status == FLASH_COMPLETE)
- {
- /* Authorize the small information block programming */
- FLASH->OPTKEYR = FLASH_KEY1;
- FLASH->OPTKEYR = FLASH_KEY2;
-
- /* if the previous operation is completed, proceed to erase the option bytes */
- FLASH->CR |= CR_OPTER_Set;
- FLASH->CR |= CR_STRT_Set;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(EraseTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the erase operation is completed, disable the OPTER Bit */
- FLASH->CR &= CR_OPTER_Reset;
-
- /* Enable the Option Bytes Programming operation */
- FLASH->CR |= CR_OPTPG_Set;
- /* Restore the last read protection Option Byte value */
- OB->RDP = (uint16_t)rdptmp;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- if(status != FLASH_TIMEOUT)
- {
- /* if the program operation is completed, disable the OPTPG Bit */
- FLASH->CR &= CR_OPTPG_Reset;
- }
- }
- else
- {
- if (status != FLASH_TIMEOUT)
- {
- /* Disable the OPTPG Bit */
- FLASH->CR &= CR_OPTPG_Reset;
- }
- }
- }
- /* Return the erase status */
- return status;
-}
-
-/**
- * @brief Programs a word at a specified address.
- * @note This function can be used for all STM32F10x devices.
- * @param Address: specifies the address to be programmed.
- * @param Data: specifies the data to be programmed.
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
-{
- FLASH_Status status = FLASH_COMPLETE;
- __IO uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_FLASH_ADDRESS(Address));
-
-#ifdef STM32F10X_XL
- if(Address < FLASH_BANK1_END_ADDRESS - 2)
- {
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new first
- half word */
- FLASH->CR |= CR_PG_Set;
-
- *(__IO uint16_t*)Address = (uint16_t)Data;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new second
- half word */
- tmp = Address + 2;
-
- *(__IO uint16_t*) tmp = Data >> 16;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- /* Disable the PG Bit */
- FLASH->CR &= CR_PG_Reset;
- }
- else
- {
- /* Disable the PG Bit */
- FLASH->CR &= CR_PG_Reset;
- }
- }
- }
- else if(Address == (FLASH_BANK1_END_ADDRESS - 1))
- {
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new first
- half word */
- FLASH->CR |= CR_PG_Set;
-
- *(__IO uint16_t*)Address = (uint16_t)Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
-
- /* Disable the PG Bit */
- FLASH->CR &= CR_PG_Reset;
- }
- else
- {
- /* Disable the PG Bit */
- FLASH->CR &= CR_PG_Reset;
- }
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new second
- half word */
- FLASH->CR2 |= CR_PG_Set;
- tmp = Address + 2;
-
- *(__IO uint16_t*) tmp = Data >> 16;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-
- /* Disable the PG Bit */
- FLASH->CR2 &= CR_PG_Reset;
- }
- else
- {
- /* Disable the PG Bit */
- FLASH->CR2 &= CR_PG_Reset;
- }
- }
- else
- {
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new first
- half word */
- FLASH->CR2 |= CR_PG_Set;
-
- *(__IO uint16_t*)Address = (uint16_t)Data;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new second
- half word */
- tmp = Address + 2;
-
- *(__IO uint16_t*) tmp = Data >> 16;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-
- /* Disable the PG Bit */
- FLASH->CR2 &= CR_PG_Reset;
- }
- else
- {
- /* Disable the PG Bit */
- FLASH->CR2 &= CR_PG_Reset;
- }
- }
- }
-#else
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new first
- half word */
- FLASH->CR |= CR_PG_Set;
-
- *(__IO uint16_t*)Address = (uint16_t)Data;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new second
- half word */
- tmp = Address + 2;
-
- *(__IO uint16_t*) tmp = Data >> 16;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- /* Disable the PG Bit */
- FLASH->CR &= CR_PG_Reset;
- }
- else
- {
- /* Disable the PG Bit */
- FLASH->CR &= CR_PG_Reset;
- }
- }
-#endif /* STM32F10X_XL */
-
- /* Return the Program Status */
- return status;
-}
-
-/**
- * @brief Programs a half word at a specified address.
- * @note This function can be used for all STM32F10x devices.
- * @param Address: specifies the address to be programmed.
- * @param Data: specifies the data to be programmed.
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
-{
- FLASH_Status status = FLASH_COMPLETE;
- /* Check the parameters */
- assert_param(IS_FLASH_ADDRESS(Address));
-
-#ifdef STM32F10X_XL
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- if(Address < FLASH_BANK1_END_ADDRESS)
- {
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new data */
- FLASH->CR |= CR_PG_Set;
-
- *(__IO uint16_t*)Address = Data;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
-
- /* Disable the PG Bit */
- FLASH->CR &= CR_PG_Reset;
- }
- }
- else
- {
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new data */
- FLASH->CR2 |= CR_PG_Set;
-
- *(__IO uint16_t*)Address = Data;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
-
- /* Disable the PG Bit */
- FLASH->CR2 &= CR_PG_Reset;
- }
- }
-#else
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* if the previous operation is completed, proceed to program the new data */
- FLASH->CR |= CR_PG_Set;
-
- *(__IO uint16_t*)Address = Data;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- /* Disable the PG Bit */
- FLASH->CR &= CR_PG_Reset;
- }
-#endif /* STM32F10X_XL */
-
- /* Return the Program Status */
- return status;
-}
-
-/**
- * @brief Programs a half word at a specified Option Byte Data address.
- * @note This function can be used for all STM32F10x devices.
- * @param Address: specifies the address to be programmed.
- * This parameter can be 0x1FFFF804 or 0x1FFFF806.
- * @param Data: specifies the data to be programmed.
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data)
-{
- FLASH_Status status = FLASH_COMPLETE;
- /* Check the parameters */
- assert_param(IS_OB_DATA_ADDRESS(Address));
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* Authorize the small information block programming */
- FLASH->OPTKEYR = FLASH_KEY1;
- FLASH->OPTKEYR = FLASH_KEY2;
- /* Enables the Option Bytes Programming operation */
- FLASH->CR |= CR_OPTPG_Set;
- *(__IO uint16_t*)Address = Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
- if(status != FLASH_TIMEOUT)
- {
- /* if the program operation is completed, disable the OPTPG Bit */
- FLASH->CR &= CR_OPTPG_Reset;
- }
- }
- /* Return the Option Byte Data Program Status */
- return status;
-}
-
-/**
- * @brief Write protects the desired pages
- * @note This function can be used for all STM32F10x devices.
- * @param FLASH_Pages: specifies the address of the pages to be write protected.
- * This parameter can be:
- * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31
- * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3
- * and FLASH_WRProt_Pages124to127
- * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and
- * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255
- * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and
- * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127
- * @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and
- * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511
- * @arg FLASH_WRProt_AllPages
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages)
-{
- uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
-
- FLASH_Status status = FLASH_COMPLETE;
-
- /* Check the parameters */
- assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages));
-
- FLASH_Pages = (uint32_t)(~FLASH_Pages);
- WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask);
- WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8);
- WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16);
- WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24);
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* Authorizes the small information block programming */
- FLASH->OPTKEYR = FLASH_KEY1;
- FLASH->OPTKEYR = FLASH_KEY2;
- FLASH->CR |= CR_OPTPG_Set;
- if(WRP0_Data != 0xFF)
- {
- OB->WRP0 = WRP0_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
- }
- if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF))
- {
- OB->WRP1 = WRP1_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
- }
- if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF))
- {
- OB->WRP2 = WRP2_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
- }
-
- if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF))
- {
- OB->WRP3 = WRP3_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
- }
-
- if(status != FLASH_TIMEOUT)
- {
- /* if the program operation is completed, disable the OPTPG Bit */
- FLASH->CR &= CR_OPTPG_Reset;
- }
- }
- /* Return the write protection operation Status */
- return status;
-}
-
-/**
- * @brief Enables or disables the read out protection.
- * @note If the user has already programmed the other option bytes before calling
- * this function, he must re-program them since this function erases all option bytes.
- * @note This function can be used for all STM32F10x devices.
- * @param Newstate: new state of the ReadOut Protection.
- * This parameter can be: ENABLE or DISABLE.
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState)
-{
- FLASH_Status status = FLASH_COMPLETE;
- /* Check the parameters */
- assert_param(IS_FUNCTIONAL_STATE(NewState));
- status = FLASH_WaitForLastOperation(EraseTimeout);
- if(status == FLASH_COMPLETE)
- {
- /* Authorizes the small information block programming */
- FLASH->OPTKEYR = FLASH_KEY1;
- FLASH->OPTKEYR = FLASH_KEY2;
- FLASH->CR |= CR_OPTER_Set;
- FLASH->CR |= CR_STRT_Set;
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(EraseTimeout);
- if(status == FLASH_COMPLETE)
- {
- /* if the erase operation is completed, disable the OPTER Bit */
- FLASH->CR &= CR_OPTER_Reset;
- /* Enable the Option Bytes Programming operation */
- FLASH->CR |= CR_OPTPG_Set;
- if(NewState != DISABLE)
- {
- OB->RDP = 0x00;
- }
- else
- {
- OB->RDP = RDP_Key;
- }
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(EraseTimeout);
-
- if(status != FLASH_TIMEOUT)
- {
- /* if the program operation is completed, disable the OPTPG Bit */
- FLASH->CR &= CR_OPTPG_Reset;
- }
- }
- else
- {
- if(status != FLASH_TIMEOUT)
- {
- /* Disable the OPTER Bit */
- FLASH->CR &= CR_OPTER_Reset;
- }
- }
- }
- /* Return the protection operation Status */
- return status;
-}
-
-/**
- * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
- * @note This function can be used for all STM32F10x devices.
- * @param OB_IWDG: Selects the IWDG mode
- * This parameter can be one of the following values:
- * @arg OB_IWDG_SW: Software IWDG selected
- * @arg OB_IWDG_HW: Hardware IWDG selected
- * @param OB_STOP: Reset event when entering STOP mode.
- * This parameter can be one of the following values:
- * @arg OB_STOP_NoRST: No reset generated when entering in STOP
- * @arg OB_STOP_RST: Reset generated when entering in STOP
- * @param OB_STDBY: Reset event when entering Standby mode.
- * This parameter can be one of the following values:
- * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY
- * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY)
-{
- FLASH_Status status = FLASH_COMPLETE;
-
- /* Check the parameters */
- assert_param(IS_OB_IWDG_SOURCE(OB_IWDG));
- assert_param(IS_OB_STOP_SOURCE(OB_STOP));
- assert_param(IS_OB_STDBY_SOURCE(OB_STDBY));
-
- /* Authorize the small information block programming */
- FLASH->OPTKEYR = FLASH_KEY1;
- FLASH->OPTKEYR = FLASH_KEY2;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* Enable the Option Bytes Programming operation */
- FLASH->CR |= CR_OPTPG_Set;
-
- OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8)));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
- if(status != FLASH_TIMEOUT)
- {
- /* if the program operation is completed, disable the OPTPG Bit */
- FLASH->CR &= CR_OPTPG_Reset;
- }
- }
- /* Return the Option Byte program Status */
- return status;
-}
-
-#ifdef STM32F10X_XL
-/**
- * @brief Configures to boot from Bank1 or Bank2.
- * @note This function can be used only for STM32F10x_XL density devices.
- * @param FLASH_BOOT: select the FLASH Bank to boot from.
- * This parameter can be one of the following values:
- * @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash
- * position and this parameter is selected the device will boot from Bank1(Default).
- * @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash
- * position and this parameter is selected the device will boot from Bank2 or Bank1,
- * depending on the activation of the bank. The active banks are checked in
- * the following order: Bank2, followed by Bank1.
- * The active bank is recognized by the value programmed at the base address
- * of the respective bank (corresponding to the initial stack pointer value
- * in the interrupt vector table).
- * For more information, please refer to AN2606 from www.st.com.
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT)
-{
- FLASH_Status status = FLASH_COMPLETE;
- assert_param(IS_FLASH_BOOT(FLASH_BOOT));
- /* Authorize the small information block programming */
- FLASH->OPTKEYR = FLASH_KEY1;
- FLASH->OPTKEYR = FLASH_KEY2;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
-
- if(status == FLASH_COMPLETE)
- {
- /* Enable the Option Bytes Programming operation */
- FLASH->CR |= CR_OPTPG_Set;
-
- if(FLASH_BOOT == FLASH_BOOT_Bank1)
- {
- OB->USER |= OB_USER_BFB2;
- }
- else
- {
- OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2));
- }
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation(ProgramTimeout);
- if(status != FLASH_TIMEOUT)
- {
- /* if the program operation is completed, disable the OPTPG Bit */
- FLASH->CR &= CR_OPTPG_Reset;
- }
- }
- /* Return the Option Byte program Status */
- return status;
-}
-#endif /* STM32F10X_XL */
-
-/**
- * @brief Returns the FLASH User Option Bytes values.
- * @note This function can be used for all STM32F10x devices.
- * @param None
- * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
- * and RST_STDBY(Bit2).
- */
-uint32_t FLASH_GetUserOptionByte(void)
-{
- /* Return the User Option Byte */
- return (uint32_t)(FLASH->OBR >> 2);
-}
-
-/**
- * @brief Returns the FLASH Write Protection Option Bytes Register value.
- * @note This function can be used for all STM32F10x devices.
- * @param None
- * @retval The FLASH Write Protection Option Bytes Register value
- */
-uint32_t FLASH_GetWriteProtectionOptionByte(void)
-{
- /* Return the Flash write protection Register value */
- return (uint32_t)(FLASH->WRPR);
-}
-
-/**
- * @brief Checks whether the FLASH Read Out Protection Status is set or not.
- * @note This function can be used for all STM32F10x devices.
- * @param None
- * @retval FLASH ReadOut Protection Status(SET or RESET)
- */
-FlagStatus FLASH_GetReadOutProtectionStatus(void)
-{
- FlagStatus readoutstatus = RESET;
- if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
- {
- readoutstatus = SET;
- }
- else
- {
- readoutstatus = RESET;
- }
- return readoutstatus;
-}
-
-/**
- * @brief Checks whether the FLASH Prefetch Buffer status is set or not.
- * @note This function can be used for all STM32F10x devices.
- * @param None
- * @retval FLASH Prefetch Buffer Status (SET or RESET).
- */
-FlagStatus FLASH_GetPrefetchBufferStatus(void)
-{
- FlagStatus bitstatus = RESET;
-
- if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET)
- {
- bitstatus = SET;
- }
- else
- {
- bitstatus = RESET;
- }
- /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */
- return bitstatus;
-}
-
-/**
- * @brief Enables or disables the specified FLASH interrupts.
- * @note This function can be used for all STM32F10x devices.
- * - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts
- for Bank1 and Bank2.
- * - For other devices it enables or disables the specified FLASH interrupts for Bank1.
- * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled.
- * This parameter can be any combination of the following values:
- * @arg FLASH_IT_ERROR: FLASH Error Interrupt
- * @arg FLASH_IT_EOP: FLASH end of operation Interrupt
- * @param NewState: new state of the specified Flash interrupts.
- * This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
-{
-#ifdef STM32F10X_XL
- /* Check the parameters */
- assert_param(IS_FLASH_IT(FLASH_IT));
- assert_param(IS_FUNCTIONAL_STATE(NewState));
-
- if((FLASH_IT & 0x80000000) != 0x0)
- {
- if(NewState != DISABLE)
- {
- /* Enable the interrupt sources */
- FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF);
- }
- else
- {
- /* Disable the interrupt sources */
- FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF);
- }
- }
- else
- {
- if(NewState != DISABLE)
- {
- /* Enable the interrupt sources */
- FLASH->CR |= FLASH_IT;
- }
- else
- {
- /* Disable the interrupt sources */
- FLASH->CR &= ~(uint32_t)FLASH_IT;
- }
- }
-#else
- /* Check the parameters */
- assert_param(IS_FLASH_IT(FLASH_IT));
- assert_param(IS_FUNCTIONAL_STATE(NewState));
-
- if(NewState != DISABLE)
- {
- /* Enable the interrupt sources */
- FLASH->CR |= FLASH_IT;
- }
- else
- {
- /* Disable the interrupt sources */
- FLASH->CR &= ~(uint32_t)FLASH_IT;
- }
-#endif /* STM32F10X_XL */
-}
-
-/**
- * @brief Checks whether the specified FLASH flag is set or not.
- * @note This function can be used for all STM32F10x devices.
- * - For STM32F10X_XL devices, this function checks whether the specified
- * Bank1 or Bank2 flag is set or not.
- * - For other devices, it checks whether the specified Bank1 flag is
- * set or not.
- * @param FLASH_FLAG: specifies the FLASH flag to check.
- * This parameter can be one of the following values:
- * @arg FLASH_FLAG_BSY: FLASH Busy flag
- * @arg FLASH_FLAG_PGERR: FLASH Program error flag
- * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
- * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
- * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag
- * @retval The new state of FLASH_FLAG (SET or RESET).
- */
-FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
-{
- FlagStatus bitstatus = RESET;
-
-#ifdef STM32F10X_XL
- /* Check the parameters */
- assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
- if(FLASH_FLAG == FLASH_FLAG_OPTERR)
- {
- if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
- {
- bitstatus = SET;
- }
- else
- {
- bitstatus = RESET;
- }
- }
- else
- {
- if((FLASH_FLAG & 0x80000000) != 0x0)
- {
- if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET)
- {
- bitstatus = SET;
- }
- else
- {
- bitstatus = RESET;
- }
- }
- else
- {
- if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
- {
- bitstatus = SET;
- }
- else
- {
- bitstatus = RESET;
- }
- }
- }
-#else
- /* Check the parameters */
- assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
- if(FLASH_FLAG == FLASH_FLAG_OPTERR)
- {
- if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
- {
- bitstatus = SET;
- }
- else
- {
- bitstatus = RESET;
- }
- }
- else
- {
- if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
- {
- bitstatus = SET;
- }
- else
- {
- bitstatus = RESET;
- }
- }
-#endif /* STM32F10X_XL */
-
- /* Return the new state of FLASH_FLAG (SET or RESET) */
- return bitstatus;
-}
-
-/**
- * @brief Clears the FLASH's pending flags.
- * @note This function can be used for all STM32F10x devices.
- * - For STM32F10X_XL devices, this function clears Bank1 or Bank2�s pending flags
- * - For other devices, it clears Bank1�s pending flags.
- * @param FLASH_FLAG: specifies the FLASH flags to clear.
- * This parameter can be any combination of the following values:
- * @arg FLASH_FLAG_PGERR: FLASH Program error flag
- * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
- * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
- * @retval None
- */
-void FLASH_ClearFlag(uint32_t FLASH_FLAG)
-{
-#ifdef STM32F10X_XL
- /* Check the parameters */
- assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
-
- if((FLASH_FLAG & 0x80000000) != 0x0)
- {
- /* Clear the flags */
- FLASH->SR2 = FLASH_FLAG;
- }
- else
- {
- /* Clear the flags */
- FLASH->SR = FLASH_FLAG;
- }
-
-#else
- /* Check the parameters */
- assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
-
- /* Clear the flags */
- FLASH->SR = FLASH_FLAG;
-#endif /* STM32F10X_XL */
-}
-
-/**
- * @brief Returns the FLASH Status.
- * @note This function can be used for all STM32F10x devices, it is equivalent
- * to FLASH_GetBank1Status function.
- * @param None
- * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
- * FLASH_ERROR_WRP or FLASH_COMPLETE
- */
-FLASH_Status FLASH_GetStatus(void)
-{
- FLASH_Status flashstatus = FLASH_COMPLETE;
-
- if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY)
- {
- flashstatus = FLASH_BUSY;
- }
- else
- {
- if((FLASH->SR & FLASH_FLAG_PGERR) != 0)
- {
- flashstatus = FLASH_ERROR_PG;
- }
- else
- {
- if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 )
- {
- flashstatus = FLASH_ERROR_WRP;
- }
- else
- {
- flashstatus = FLASH_COMPLETE;
- }
- }
- }
- /* Return the Flash Status */
- return flashstatus;
-}
-
-/**
- * @brief Returns the FLASH Bank1 Status.
- * @note This function can be used for all STM32F10x devices, it is equivalent
- * to FLASH_GetStatus function.
- * @param None
- * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
- * FLASH_ERROR_WRP or FLASH_COMPLETE
- */
-FLASH_Status FLASH_GetBank1Status(void)
-{
- FLASH_Status flashstatus = FLASH_COMPLETE;
-
- if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY)
- {
- flashstatus = FLASH_BUSY;
- }
- else
- {
- if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0)
- {
- flashstatus = FLASH_ERROR_PG;
- }
- else
- {
- if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 )
- {
- flashstatus = FLASH_ERROR_WRP;
- }
- else
- {
- flashstatus = FLASH_COMPLETE;
- }
- }
- }
- /* Return the Flash Status */
- return flashstatus;
-}
-
-#ifdef STM32F10X_XL
-/**
- * @brief Returns the FLASH Bank2 Status.
- * @note This function can be used for STM32F10x_XL density devices.
- * @param None
- * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
- * FLASH_ERROR_WRP or FLASH_COMPLETE
- */
-FLASH_Status FLASH_GetBank2Status(void)
-{
- FLASH_Status flashstatus = FLASH_COMPLETE;
-
- if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF))
- {
- flashstatus = FLASH_BUSY;
- }
- else
- {
- if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0)
- {
- flashstatus = FLASH_ERROR_PG;
- }
- else
- {
- if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 )
- {
- flashstatus = FLASH_ERROR_WRP;
- }
- else
- {
- flashstatus = FLASH_COMPLETE;
- }
- }
- }
- /* Return the Flash Status */
- return flashstatus;
-}
-#endif /* STM32F10X_XL */
-/**
- * @brief Waits for a Flash operation to complete or a TIMEOUT to occur.
- * @note This function can be used for all STM32F10x devices,
- * it is equivalent to FLASH_WaitForLastBank1Operation.
- * - For STM32F10X_XL devices this function waits for a Bank1 Flash operation
- * to complete or a TIMEOUT to occur.
- * - For all other devices it waits for a Flash operation to complete
- * or a TIMEOUT to occur.
- * @param Timeout: FLASH programming Timeout
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
-{
- FLASH_Status status = FLASH_COMPLETE;
-
- /* Check for the Flash Status */
- status = FLASH_GetBank1Status();
- /* Wait for a Flash operation to complete or a TIMEOUT to occur */
- while((status == FLASH_BUSY) && (Timeout != 0x00))
- {
- status = FLASH_GetBank1Status();
- Timeout--;
- }
- if(Timeout == 0x00 )
- {
- status = FLASH_TIMEOUT;
- }
- /* Return the operation status */
- return status;
-}
-
-/**
- * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
- * @note This function can be used for all STM32F10x devices,
- * it is equivalent to FLASH_WaitForLastOperation.
- * @param Timeout: FLASH programming Timeout
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
-{
- FLASH_Status status = FLASH_COMPLETE;
-
- /* Check for the Flash Status */
- status = FLASH_GetBank1Status();
- /* Wait for a Flash operation to complete or a TIMEOUT to occur */
- while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00))
- {
- status = FLASH_GetBank1Status();
- Timeout--;
- }
- if(Timeout == 0x00 )
- {
- status = FLASH_TIMEOUT;
- }
- /* Return the operation status */
- return status;
-}
-
-#ifdef STM32F10X_XL
-/**
- * @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur.
- * @note This function can be used only for STM32F10x_XL density devices.
- * @param Timeout: FLASH programming Timeout
- * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
- * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
- */
-FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout)
-{
- FLASH_Status status = FLASH_COMPLETE;
-
- /* Check for the Flash Status */
- status = FLASH_GetBank2Status();
- /* Wait for a Flash operation to complete or a TIMEOUT to occur */
- while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00))
- {
- status = FLASH_GetBank2Status();
- Timeout--;
- }
- if(Timeout == 0x00 )
- {
- status = FLASH_TIMEOUT;
- }
- /* Return the operation status */
- return status;
-}
-#endif /* STM32F10X_XL */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+/**
+ ******************************************************************************
+ * @file stm32f10x_flash.c
+ * @author MCD Application Team
+ * @version V3.5.0
+ * @date 11-March-2011
+ * @brief This file provides all the FLASH firmware functions.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_flash.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup FLASH
+ * @brief FLASH driver modules
+ * @{
+ */
+
+/** @defgroup FLASH_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Defines
+ * @{
+ */
+
+/* Flash Access Control Register bits */
+#define ACR_LATENCY_Mask ((uint32_t)0x00000038)
+#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7)
+#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF)
+
+/* Flash Access Control Register bits */
+#define ACR_PRFTBS_Mask ((uint32_t)0x00000020)
+
+/* Flash Control Register bits */
+#define CR_PG_Set ((uint32_t)0x00000001)
+#define CR_PG_Reset ((uint32_t)0x00001FFE)
+#define CR_PER_Set ((uint32_t)0x00000002)
+#define CR_PER_Reset ((uint32_t)0x00001FFD)
+#define CR_MER_Set ((uint32_t)0x00000004)
+#define CR_MER_Reset ((uint32_t)0x00001FFB)
+#define CR_OPTPG_Set ((uint32_t)0x00000010)
+#define CR_OPTPG_Reset ((uint32_t)0x00001FEF)
+#define CR_OPTER_Set ((uint32_t)0x00000020)
+#define CR_OPTER_Reset ((uint32_t)0x00001FDF)
+#define CR_STRT_Set ((uint32_t)0x00000040)
+#define CR_LOCK_Set ((uint32_t)0x00000080)
+
+/* FLASH Mask */
+#define RDPRT_Mask ((uint32_t)0x00000002)
+#define WRP0_Mask ((uint32_t)0x000000FF)
+#define WRP1_Mask ((uint32_t)0x0000FF00)
+#define WRP2_Mask ((uint32_t)0x00FF0000)
+#define WRP3_Mask ((uint32_t)0xFF000000)
+#define OB_USER_BFB2 ((uint16_t)0x0008)
+
+/* FLASH Keys */
+#define RDP_Key ((uint16_t)0x00A5)
+#define FLASH_KEY1 ((uint32_t)0x45670123)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
+
+/* FLASH BANK address */
+#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF)
+
+/* Delay definition */
+#define EraseTimeout ((uint32_t)0x000B0000)
+#define ProgramTimeout ((uint32_t)0x00002000)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Private_Functions
+ * @{
+ */
+
+/**
+@code
+
+ This driver provides functions to configure and program the Flash memory of all STM32F10x devices,
+ including the latest STM32F10x_XL density devices.
+
+ STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability:
+ - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each)
+ - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each)
+ While other STM32F10x devices features only one bank with memory up to 512 Kbytes.
+
+ In version V3.3.0, some functions were updated and new ones were added to support
+ STM32F10x_XL devices. Thus some functions manages all devices, while other are
+ dedicated for XL devices only.
+
+ The table below presents the list of available functions depending on the used STM32F10x devices.
+
+ ***************************************************
+ * Legacy functions used for all STM32F10x devices *
+ ***************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_SetLatency | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_HalfCycleAccessCmd | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_PrefetchBufferCmd | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_Unlock | Yes | Yes | - For STM32F10X_XL devices: unlock Bank1 and Bank2. |
+ | | | | - For other devices: unlock Bank1 and it is equivalent |
+ | | | | to FLASH_UnlockBank1 function. |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_Lock | Yes | Yes | - For STM32F10X_XL devices: lock Bank1 and Bank2. |
+ | | | | - For other devices: lock Bank1 and it is equivalent |
+ | | | | to FLASH_LockBank1 function. |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ErasePage | Yes | Yes | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2 |
+ | | | | - For other devices: erase a page in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EraseAllPages | Yes | Yes | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 |
+ | | | | - For other devices: erase all pages in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EraseOptionBytes | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramHalfWord | Yes | Yes | Updated to program up to 1MByte (depending on the used device) |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ProgramOptionByteData | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_EnableWriteProtection | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ReadOutProtection | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_UserOptionByteConfig | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetUserOptionByte | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetWriteProtectionOptionByte | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetReadOutProtectionStatus | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetPrefetchBufferStatus | Yes | Yes | No change |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ITConfig | Yes | Yes | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts|
+ | | | | - For other devices: enable Bank1's interrupts |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetFlagStatus | Yes | Yes | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status|
+ | | | | - For other devices: return Bank1's flag status |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_ClearFlag | Yes | Yes | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag |
+ | | | | - For other devices: clear Bank1's flag |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_GetStatus | Yes | Yes | - Return the status of Bank1 (for all devices) |
+ | | | | equivalent to FLASH_GetBank1Status function |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_WaitForLastOperation | Yes | Yes | - Wait for Bank1 last operation (for all devices) |
+ | | | | equivalent to: FLASH_WaitForLastBank1Operation function |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+
+ ************************************************************************************************************************
+ * New functions used for all STM32F10x devices to manage Bank1: *
+ * - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 *
+ * - For other devices, these functions are optional (covered by functions listed above) *
+ ************************************************************************************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_UnlockBank1 | Yes | Yes | - Unlock Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_LockBank1 | Yes | Yes | - Lock Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_EraseAllBank1Pages | Yes | Yes | - Erase all pages in Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_GetBank1Status | Yes | Yes | - Return the status of Bank1 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_WaitForLastBank1Operation | Yes | Yes | - Wait for Bank1 last operation |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+
+ *****************************************************************************
+ * New Functions used only with STM32F10x_XL density devices to manage Bank2 *
+ *****************************************************************************
+ +----------------------------------------------------------------------------------------------------------------------------------+
+ | Functions prototypes |STM32F10x_XL|Other STM32F10x| Comments |
+ | | devices | devices | |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_UnlockBank2 | Yes | No | - Unlock Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ |FLASH_LockBank2 | Yes | No | - Lock Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_EraseAllBank2Pages | Yes | No | - Erase all pages in Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_GetBank2Status | Yes | No | - Return the status of Bank2 |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_WaitForLastBank2Operation | Yes | No | - Wait for Bank2 last operation |
+ |----------------------------------------------------------------------------------------------------------------------------------|
+ | FLASH_BootConfig | Yes | No | - Configure to boot from Bank1 or Bank2 |
+ +----------------------------------------------------------------------------------------------------------------------------------+
+@endcode
+*/
+
+
+/**
+ * @brief Sets the code latency value.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_Latency: specifies the FLASH Latency value.
+ * This parameter can be one of the following values:
+ * @arg FLASH_Latency_0: FLASH Zero Latency cycle
+ * @arg FLASH_Latency_1: FLASH One Latency cycle
+ * @arg FLASH_Latency_2: FLASH Two Latency cycles
+ * @retval None
+ */
+void FLASH_SetLatency(uint32_t FLASH_Latency)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_LATENCY(FLASH_Latency));
+
+ /* Read the ACR register */
+ tmpreg = FLASH->ACR;
+
+ /* Sets the Latency value */
+ tmpreg &= ACR_LATENCY_Mask;
+ tmpreg |= FLASH_Latency;
+
+ /* Write the ACR register */
+ FLASH->ACR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Half cycle flash access.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode.
+ * This parameter can be one of the following values:
+ * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable
+ * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable
+ * @retval None
+ */
+void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess));
+
+ /* Enable or disable the Half cycle access */
+ FLASH->ACR &= ACR_HLFCYA_Mask;
+ FLASH->ACR |= FLASH_HalfCycleAccess;
+}
+
+/**
+ * @brief Enables or disables the Prefetch Buffer.
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status.
+ * This parameter can be one of the following values:
+ * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable
+ * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable
+ * @retval None
+ */
+void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer)
+{
+ /* Check the parameters */
+ assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer));
+
+ /* Enable or disable the Prefetch Buffer */
+ FLASH->ACR &= ACR_PRFTBE_Mask;
+ FLASH->ACR |= FLASH_PrefetchBuffer;
+}
+
+/**
+ * @brief Unlocks the FLASH Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function unlocks Bank1 and Bank2.
+ * - For all other devices it unlocks Bank1 and it is equivalent
+ * to FLASH_UnlockBank1 function..
+ * @param None
+ * @retval None
+ */
+void FLASH_Unlock(void)
+{
+ /* Authorize the FPEC of Bank1 Access */
+ FLASH->KEYR = FLASH_KEY1;
+ FLASH->KEYR = FLASH_KEY2;
+
+#ifdef STM32F10X_XL
+ /* Authorize the FPEC of Bank2 Access */
+ FLASH->KEYR2 = FLASH_KEY1;
+ FLASH->KEYR2 = FLASH_KEY2;
+#endif /* STM32F10X_XL */
+}
+/**
+ * @brief Unlocks the FLASH Bank1 Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function unlocks Bank1.
+ * - For all other devices it unlocks Bank1 and it is
+ * equivalent to FLASH_Unlock function.
+ * @param None
+ * @retval None
+ */
+void FLASH_UnlockBank1(void)
+{
+ /* Authorize the FPEC of Bank1 Access */
+ FLASH->KEYR = FLASH_KEY1;
+ FLASH->KEYR = FLASH_KEY2;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Unlocks the FLASH Bank2 Program Erase Controller.
+ * @note This function can be used only for STM32F10X_XL density devices.
+ * @param None
+ * @retval None
+ */
+void FLASH_UnlockBank2(void)
+{
+ /* Authorize the FPEC of Bank2 Access */
+ FLASH->KEYR2 = FLASH_KEY1;
+ FLASH->KEYR2 = FLASH_KEY2;
+
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Locks the FLASH Program Erase Controller.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function Locks Bank1 and Bank2.
+ * - For all other devices it Locks Bank1 and it is equivalent
+ * to FLASH_LockBank1 function.
+ * @param None
+ * @retval None
+ */
+void FLASH_Lock(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
+ FLASH->CR |= CR_LOCK_Set;
+
+#ifdef STM32F10X_XL
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
+ FLASH->CR2 |= CR_LOCK_Set;
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Locks the FLASH Bank1 Program Erase Controller.
+ * @note this function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function Locks Bank1.
+ * - For all other devices it Locks Bank1 and it is equivalent
+ * to FLASH_Lock function.
+ * @param None
+ * @retval None
+ */
+void FLASH_LockBank1(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank1 */
+ FLASH->CR |= CR_LOCK_Set;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Locks the FLASH Bank2 Program Erase Controller.
+ * @note This function can be used only for STM32F10X_XL density devices.
+ * @param None
+ * @retval None
+ */
+void FLASH_LockBank2(void)
+{
+ /* Set the Lock Bit to lock the FPEC and the CR of Bank2 */
+ FLASH->CR2 |= CR_LOCK_Set;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Erases a specified FLASH page.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Page_Address: The page address to be erased.
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Page_Address));
+
+#ifdef STM32F10X_XL
+ if(Page_Address < FLASH_BANK1_END_ADDRESS)
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR|= CR_PER_Set;
+ FLASH->AR = Page_Address;
+ FLASH->CR|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR &= CR_PER_Reset;
+ }
+ }
+ else
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR2|= CR_PER_Set;
+ FLASH->AR2 = Page_Address;
+ FLASH->CR2|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR2 &= CR_PER_Reset;
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase the page */
+ FLASH->CR|= CR_PER_Set;
+ FLASH->AR = Page_Address;
+ FLASH->CR|= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ /* Disable the PER Bit */
+ FLASH->CR &= CR_PER_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Erase Status */
+ return status;
+}
+
+/**
+ * @brief Erases all FLASH pages.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllPages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+#ifdef STM32F10X_XL
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR2 |= CR_MER_Set;
+ FLASH->CR2 |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR2 &= CR_MER_Reset;
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Erase Status */
+ return status;
+}
+
+/**
+ * @brief Erases all Bank1 FLASH pages.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices this function erases all Bank1 pages.
+ * - For all other devices it erases all Bank1 pages and it is equivalent
+ * to FLASH_EraseAllPages function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllBank1Pages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR |= CR_MER_Set;
+ FLASH->CR |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR &= CR_MER_Reset;
+ }
+ /* Return the Erase Status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Erases all Bank2 FLASH pages.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseAllBank2Pages(void)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to erase all pages */
+ FLASH->CR2 |= CR_MER_Set;
+ FLASH->CR2 |= CR_STRT_Set;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+ /* Disable the MER Bit */
+ FLASH->CR2 &= CR_MER_Reset;
+ }
+ /* Return the Erase Status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Erases the FLASH option bytes.
+ * @note This functions erases all option bytes except the Read protection (RDP).
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EraseOptionBytes(void)
+{
+ uint16_t rdptmp = RDP_Key;
+
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Get the actual read protection Option Byte value */
+ if(FLASH_GetReadOutProtectionStatus() != RESET)
+ {
+ rdptmp = 0x00;
+ }
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* if the previous operation is completed, proceed to erase the option bytes */
+ FLASH->CR |= CR_OPTER_Set;
+ FLASH->CR |= CR_STRT_Set;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the erase operation is completed, disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ /* Restore the last read protection Option Byte value */
+ OB->RDP = (uint16_t)rdptmp;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ else
+ {
+ if (status != FLASH_TIMEOUT)
+ {
+ /* Disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ }
+ /* Return the erase status */
+ return status;
+}
+
+/**
+ * @brief Programs a word at a specified address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ __IO uint32_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+#ifdef STM32F10X_XL
+ if(Address < FLASH_BANK1_END_ADDRESS - 2)
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+ }
+ else if(Address == (FLASH_BANK1_END_ADDRESS - 1))
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ FLASH->CR2 |= CR_PG_Set;
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+ else
+ {
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR2 |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new first
+ half word */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = (uint16_t)Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new second
+ half word */
+ tmp = Address + 2;
+
+ *(__IO uint16_t*) tmp = Data >> 16;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ else
+ {
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Program Status */
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FLASH_ADDRESS(Address));
+
+#ifdef STM32F10X_XL
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(Address < FLASH_BANK1_END_ADDRESS)
+ {
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+ }
+ else
+ {
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR2 |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR2 &= CR_PG_Reset;
+ }
+ }
+#else
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the previous operation is completed, proceed to program the new data */
+ FLASH->CR |= CR_PG_Set;
+
+ *(__IO uint16_t*)Address = Data;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ /* Disable the PG Bit */
+ FLASH->CR &= CR_PG_Reset;
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the Program Status */
+ return status;
+}
+
+/**
+ * @brief Programs a half word at a specified Option Byte Data address.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Address: specifies the address to be programmed.
+ * This parameter can be 0x1FFFF804 or 0x1FFFF806.
+ * @param Data: specifies the data to be programmed.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_OB_DATA_ADDRESS(Address));
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ /* Enables the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ *(__IO uint16_t*)Address = Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte Data Program Status */
+ return status;
+}
+
+/**
+ * @brief Write protects the desired pages
+ * @note This function can be used for all STM32F10x devices.
+ * @param FLASH_Pages: specifies the address of the pages to be write protected.
+ * This parameter can be:
+ * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31
+ * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3
+ * and FLASH_WRProt_Pages124to127
+ * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255
+ * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127
+ * @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and
+ * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511
+ * @arg FLASH_WRProt_AllPages
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages)
+{
+ uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
+
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check the parameters */
+ assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages));
+
+ FLASH_Pages = (uint32_t)(~FLASH_Pages);
+ WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask);
+ WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8);
+ WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16);
+ WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24);
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorizes the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ FLASH->CR |= CR_OPTPG_Set;
+ if(WRP0_Data != 0xFF)
+ {
+ OB->WRP0 = WRP0_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+ if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF))
+ {
+ OB->WRP1 = WRP1_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+ if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF))
+ {
+ OB->WRP2 = WRP2_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+
+ if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF))
+ {
+ OB->WRP3 = WRP3_Data;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ }
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the write protection operation Status */
+ return status;
+}
+
+/**
+ * @brief Enables or disables the read out protection.
+ * @note If the user has already programmed the other option bytes before calling
+ * this function, he must re-program them since this function erases all option bytes.
+ * @note This function can be used for all STM32F10x devices.
+ * @param Newstate: new state of the ReadOut Protection.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* Authorizes the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+ FLASH->CR |= CR_OPTER_Set;
+ FLASH->CR |= CR_STRT_Set;
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+ if(status == FLASH_COMPLETE)
+ {
+ /* if the erase operation is completed, disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+ if(NewState != DISABLE)
+ {
+ OB->RDP = 0x00;
+ }
+ else
+ {
+ OB->RDP = RDP_Key;
+ }
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(EraseTimeout);
+
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ else
+ {
+ if(status != FLASH_TIMEOUT)
+ {
+ /* Disable the OPTER Bit */
+ FLASH->CR &= CR_OPTER_Reset;
+ }
+ }
+ }
+ /* Return the protection operation Status */
+ return status;
+}
+
+/**
+ * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+ * @note This function can be used for all STM32F10x devices.
+ * @param OB_IWDG: Selects the IWDG mode
+ * This parameter can be one of the following values:
+ * @arg OB_IWDG_SW: Software IWDG selected
+ * @arg OB_IWDG_HW: Hardware IWDG selected
+ * @param OB_STOP: Reset event when entering STOP mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STOP_NoRST: No reset generated when entering in STOP
+ * @arg OB_STOP_RST: Reset generated when entering in STOP
+ * @param OB_STDBY: Reset event when entering Standby mode.
+ * This parameter can be one of the following values:
+ * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY
+ * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check the parameters */
+ assert_param(IS_OB_IWDG_SOURCE(OB_IWDG));
+ assert_param(IS_OB_STOP_SOURCE(OB_STOP));
+ assert_param(IS_OB_STDBY_SOURCE(OB_STDBY));
+
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+
+ OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8)));
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte program Status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Configures to boot from Bank1 or Bank2.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param FLASH_BOOT: select the FLASH Bank to boot from.
+ * This parameter can be one of the following values:
+ * @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash
+ * position and this parameter is selected the device will boot from Bank1(Default).
+ * @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash
+ * position and this parameter is selected the device will boot from Bank2 or Bank1,
+ * depending on the activation of the bank. The active banks are checked in
+ * the following order: Bank2, followed by Bank1.
+ * The active bank is recognized by the value programmed at the base address
+ * of the respective bank (corresponding to the initial stack pointer value
+ * in the interrupt vector table).
+ * For more information, please refer to AN2606 from www.st.com.
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+ assert_param(IS_FLASH_BOOT(FLASH_BOOT));
+ /* Authorize the small information block programming */
+ FLASH->OPTKEYR = FLASH_KEY1;
+ FLASH->OPTKEYR = FLASH_KEY2;
+
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+ if(status == FLASH_COMPLETE)
+ {
+ /* Enable the Option Bytes Programming operation */
+ FLASH->CR |= CR_OPTPG_Set;
+
+ if(FLASH_BOOT == FLASH_BOOT_Bank1)
+ {
+ OB->USER |= OB_USER_BFB2;
+ }
+ else
+ {
+ OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2));
+ }
+ /* Wait for last operation to be completed */
+ status = FLASH_WaitForLastOperation(ProgramTimeout);
+ if(status != FLASH_TIMEOUT)
+ {
+ /* if the program operation is completed, disable the OPTPG Bit */
+ FLASH->CR &= CR_OPTPG_Reset;
+ }
+ }
+ /* Return the Option Byte program Status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @brief Returns the FLASH User Option Bytes values.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
+ * and RST_STDBY(Bit2).
+ */
+uint32_t FLASH_GetUserOptionByte(void)
+{
+ /* Return the User Option Byte */
+ return (uint32_t)(FLASH->OBR >> 2);
+}
+
+/**
+ * @brief Returns the FLASH Write Protection Option Bytes Register value.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval The FLASH Write Protection Option Bytes Register value
+ */
+uint32_t FLASH_GetWriteProtectionOptionByte(void)
+{
+ /* Return the Flash write protection Register value */
+ return (uint32_t)(FLASH->WRPR);
+}
+
+/**
+ * @brief Checks whether the FLASH Read Out Protection Status is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH ReadOut Protection Status(SET or RESET)
+ */
+FlagStatus FLASH_GetReadOutProtectionStatus(void)
+{
+ FlagStatus readoutstatus = RESET;
+ if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
+ {
+ readoutstatus = SET;
+ }
+ else
+ {
+ readoutstatus = RESET;
+ }
+ return readoutstatus;
+}
+
+/**
+ * @brief Checks whether the FLASH Prefetch Buffer status is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * @param None
+ * @retval FLASH Prefetch Buffer Status (SET or RESET).
+ */
+FlagStatus FLASH_GetPrefetchBufferStatus(void)
+{
+ FlagStatus bitstatus = RESET;
+
+ if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */
+ return bitstatus;
+}
+
+/**
+ * @brief Enables or disables the specified FLASH interrupts.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts
+ for Bank1 and Bank2.
+ * - For other devices it enables or disables the specified FLASH interrupts for Bank1.
+ * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_ERROR: FLASH Error Interrupt
+ * @arg FLASH_IT_EOP: FLASH end of operation Interrupt
+ * @param NewState: new state of the specified Flash interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
+{
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_IT(FLASH_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if((FLASH_IT & 0x80000000) != 0x0)
+ {
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF);
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF);
+ }
+ }
+ else
+ {
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR |= FLASH_IT;
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR &= ~(uint32_t)FLASH_IT;
+ }
+ }
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_IT(FLASH_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if(NewState != DISABLE)
+ {
+ /* Enable the interrupt sources */
+ FLASH->CR |= FLASH_IT;
+ }
+ else
+ {
+ /* Disable the interrupt sources */
+ FLASH->CR &= ~(uint32_t)FLASH_IT;
+ }
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Checks whether the specified FLASH flag is set or not.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, this function checks whether the specified
+ * Bank1 or Bank2 flag is set or not.
+ * - For other devices, it checks whether the specified Bank1 flag is
+ * set or not.
+ * @param FLASH_FLAG: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_BSY: FLASH Busy flag
+ * @arg FLASH_FLAG_PGERR: FLASH Program error flag
+ * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag
+ * @retval The new state of FLASH_FLAG (SET or RESET).
+ */
+FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
+ if(FLASH_FLAG == FLASH_FLAG_OPTERR)
+ {
+ if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH_FLAG & 0x80000000) != 0x0)
+ {
+ if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ }
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
+ if(FLASH_FLAG == FLASH_FLAG_OPTERR)
+ {
+ if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ }
+#endif /* STM32F10X_XL */
+
+ /* Return the new state of FLASH_FLAG (SET or RESET) */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the FLASH's pending flags.
+ * @note This function can be used for all STM32F10x devices.
+ * - For STM32F10X_XL devices, this function clears Bank1 or Bank2�s pending flags
+ * - For other devices, it clears Bank1�s pending flags.
+ * @param FLASH_FLAG: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_PGERR: FLASH Program error flag
+ * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
+ * @retval None
+ */
+void FLASH_ClearFlag(uint32_t FLASH_FLAG)
+{
+#ifdef STM32F10X_XL
+ /* Check the parameters */
+ assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
+
+ if((FLASH_FLAG & 0x80000000) != 0x0)
+ {
+ /* Clear the flags */
+ FLASH->SR2 = FLASH_FLAG;
+ }
+ else
+ {
+ /* Clear the flags */
+ FLASH->SR = FLASH_FLAG;
+ }
+
+#else
+ /* Check the parameters */
+ assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
+
+ /* Clear the flags */
+ FLASH->SR = FLASH_FLAG;
+#endif /* STM32F10X_XL */
+}
+
+/**
+ * @brief Returns the FLASH Status.
+ * @note This function can be used for all STM32F10x devices, it is equivalent
+ * to FLASH_GetBank1Status function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetStatus(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY)
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_PGERR) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+
+/**
+ * @brief Returns the FLASH Bank1 Status.
+ * @note This function can be used for all STM32F10x devices, it is equivalent
+ * to FLASH_GetStatus function.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetBank1Status(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY)
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Returns the FLASH Bank2 Status.
+ * @note This function can be used for STM32F10x_XL density devices.
+ * @param None
+ * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP or FLASH_COMPLETE
+ */
+FLASH_Status FLASH_GetBank2Status(void)
+{
+ FLASH_Status flashstatus = FLASH_COMPLETE;
+
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF))
+ {
+ flashstatus = FLASH_BUSY;
+ }
+ else
+ {
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0)
+ {
+ flashstatus = FLASH_ERROR_PG;
+ }
+ else
+ {
+ if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 )
+ {
+ flashstatus = FLASH_ERROR_WRP;
+ }
+ else
+ {
+ flashstatus = FLASH_COMPLETE;
+ }
+ }
+ }
+ /* Return the Flash Status */
+ return flashstatus;
+}
+#endif /* STM32F10X_XL */
+/**
+ * @brief Waits for a Flash operation to complete or a TIMEOUT to occur.
+ * @note This function can be used for all STM32F10x devices,
+ * it is equivalent to FLASH_WaitForLastBank1Operation.
+ * - For STM32F10X_XL devices this function waits for a Bank1 Flash operation
+ * to complete or a TIMEOUT to occur.
+ * - For all other devices it waits for a Flash operation to complete
+ * or a TIMEOUT to occur.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank1Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == FLASH_BUSY) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank1Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+
+/**
+ * @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
+ * @note This function can be used for all STM32F10x devices,
+ * it is equivalent to FLASH_WaitForLastOperation.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank1Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank1Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+ * @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur.
+ * @note This function can be used only for STM32F10x_XL density devices.
+ * @param Timeout: FLASH programming Timeout
+ * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+ * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+ */
+FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout)
+{
+ FLASH_Status status = FLASH_COMPLETE;
+
+ /* Check for the Flash Status */
+ status = FLASH_GetBank2Status();
+ /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+ while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00))
+ {
+ status = FLASH_GetBank2Status();
+ Timeout--;
+ }
+ if(Timeout == 0x00 )
+ {
+ status = FLASH_TIMEOUT;
+ }
+ /* Return the operation status */
+ return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
--
Gitblit v1.9.1