/*********************************************************************************
 *      Copyright:  (C) 2019 LingYun IoT System Studio
 *                  All rights reserved.
 *
 *       Filename:  conf.c
 *    Description:  This file is mqttd configure file parser function
 *                 
 *        Version:  1.0.0(2019年06月25日)
 *         Author:  Guo Wenxue <guowenxue@gmail.com>
 *      ChangeLog:  1, Release initial version on "2019年06月25日 22时23分55秒"
 *                 
 ********************************************************************************/
#include "conf.h"
#include "lylib/logger.h"
#include "lylib/iniparser.h"


int mqttd_parser_conf(const char *conf_file, mqtt_ctx_t *ctx, int debug)
{
    dictionary          *ini;
    char                *str;
    int                  val; 

    memset(ctx, 0, sizeof(*ctx));

    if( !conf_file )
    { 
        strncpy(ctx->id, "\"rpi3b001\"", sizeof(ctx->id));

        /* logger settings */
        strncpy(ctx->logfile, DBG_LOG_FILE, sizeof(ctx->logfile));
        ctx->loglevel = LOG_LEVEL_DEBUG;
        ctx->logsize = 1024;

        if( logger_init(ctx->logfile, ctx->loglevel, ctx->logsize) < 0 ) 
        {
            fprintf(stderr, "Logger system initialise failure\n");
            return -2;
        } 
        log_nrml("Logger system initialise ok\n");
        log_warn("WARNNING: Use default MQTT configure\n");

        /* Broker settings */
        strncpy(ctx->host, DEF_BORKER_HOSTNAME, sizeof(ctx->host));
        ctx->port = DEF_BROKER_PORT;
        log_nrml("Use default broker server [%s:%d]\n", ctx->host, ctx->port);

        strncpy(ctx->uid, DEF_BROKER_USERNAME, sizeof(ctx->uid));
        strncpy(ctx->pwd, DEF_BROKER_PASSWD, sizeof(ctx->pwd));
        log_nrml("Use default broker author by [%s:%s]\n", ctx->uid, ctx->pwd);

        ctx->keepalive = DEF_BROKER_KEEPALIVE;
        log_nrml("Use default broker keepalive timeout [%d] seconds\n", ctx->keepalive);
        
        /* Publisher settings */
        strncpy(ctx->pubTopic, DEF_PUBTOPIC, sizeof(ctx->pubTopic));
        ctx->pubQos = DEF_PUBQOS;
        ctx->interval = DEF_PUBINTERVAL;
        log_nrml("Use default publisher topic \"%s\" with Qos[%d] interval[%d]\n", ctx->pubTopic, ctx->pubQos, ctx->interval);

        /* Subscriber settings */
        strncpy(ctx->subTopic, DEF_SUBTOPIC, sizeof(ctx->subTopic));
        ctx->subQos = DEF_SUBQOS;
        log_nrml("Use default subscriber topic \"%s\" with Qos[%d]\n", ctx->subTopic, ctx->subQos);

        return 0;
    }


    ini = iniparser_load(conf_file);
    if( !ini )
    {
        fprintf(stderr, "ERROR: cannot parse file: '%s'\n", conf_file);
        return -1;
    }

    /*+------------------------------------------------------+
     *|    parser logger settings and start logger system    |
     *+------------------------------------------------------+*/
    if( !debug ) 
    {
        str = iniparser_getstring(ini, "logger:file", "/tmp/mqttd.log");
        strncpy(ctx->logfile, str, sizeof(ctx->logfile));
        ctx->logsize = iniparser_getint(ini, "logger:size", 1024);
        ctx->loglevel = iniparser_getint(ini, "logger:level", LOG_LEVEL_DEBUG);
    }
    else
    {
        strncpy(ctx->logfile, DBG_LOG_FILE, sizeof(ctx->logfile));
        ctx->loglevel = LOG_LEVEL_DEBUG;
        ctx->logsize = 1024;
    }

    if( logger_init(ctx->logfile, ctx->loglevel, ctx->logsize) < 0 ) 
    {
        fprintf(stderr, "Logger system initialise failure\n");
        return -2;
    }

    log_nrml("Logger system initialise ok\n");


    /*+------------------------------------------------------+
     *|      parser hardware module configuration ID         |
     *+------------------------------------------------------+*/

    /* hardware module enable or not */
    ctx->hwconf.enable=iniparser_getint(ini, "hardware:enable", 0);
    log_nrml("Parser hardware modules [%s]\n", ctx->hwconf.enable ? "enable" : "disable");

    /* relay control light  */
    ctx->hwconf.relay_pin=iniparser_getint(ini, "hardware:relay_pin", 0);
    if( !ctx->hwconf.relay_pin )
        log_nrml("Parser relay module disabled\n");
    else
        log_nrml("Parser relay connected wPI #pin number [%d]\n", ctx->hwconf.relay_pin); 

    /* buzzer */
    ctx->hwconf.beep_pin=iniparser_getint(ini, "hardware:beep_pin", 0); 
    log_nrml("Parser buzzer connected wPI #pin number [%d]\n", ctx->hwconf.beep_pin); 

    /* Beep max. times set beep 10 */ 
    ctx->hwconf.beep_times = iniparser_getint(ini, "hardware:beep_times", 0); 
    log_nrml("Parser inbreak buzzer beep times [%d]\n", ctx->hwconf.beep_times);


    /* RGB 3-colors LED  */
    ctx->hwconf.red_pin=iniparser_getint(ini, "hardware:red_pin", 0);
    ctx->hwconf.green_pin=iniparser_getint(ini, "hardware:green_pin", 0);
    ctx->hwconf.blue_pin=iniparser_getint(ini, "hardware:blue_pin", 0);
    if( !ctx->hwconf.red_pin && !ctx->hwconf.green_pin && !ctx->hwconf.blue_pin )
    {
        ctx->hwconf.leds = 0;
        log_nrml("Parser RGB leds module disabled\n");
    }
    else
    {
        ctx->hwconf.leds = 1;
        log_nrml("Parser RGB led connected wPI #pin number [%d,%d,%d]\n", 
            ctx->hwconf.red_pin, ctx->hwconf.green_pin, ctx->hwconf.blue_pin);
    }

    /* temperature sensor ds18b20  */
    ctx->hwconf.ds18b20=iniparser_getint(ini, "hardware:ds18b20", 0);
    log_nrml("Parser temperature sensor DS18B20 modules [%s]\n", ctx->hwconf.ds18b20 ? "enable" : "disable");

    /* temperature and hummidity sensor sht2x  */
    ctx->hwconf.sht2x=iniparser_getint(ini, "hardware:sht2x", 0);
    log_nrml("Parser temperature and hummidity sensor sht2x modules [%s]\n", ctx->hwconf.sht2x ? "enable" : "disable");

    /* light intensity sensor TSL2561 */
    ctx->hwconf.lux=iniparser_getint(ini, "hardware:lux", 0);
    log_nrml("Parser light intensity sensor TSL2561 modules [%s]\n", ctx->hwconf.ds18b20 ? "enable" : "disable");

    ctx->hwconf.infrared_pin=iniparser_getint(ini, "hardware:infrared_pin", 0);
    log_nrml("Parser infrared pin connected wPI #pin number [%d]\n", ctx->hwconf.infrared_pin);

    if( ctx->hwconf.infrared_pin )
    {
        ctx->hwconf.inbreak_beep = iniparser_getint(ini, "hardware:inbreak_beep", 0); 
        log_nrml("Parser %s inbreak beep\n", ctx->hwconf.inbreak_beep? "enable" : "disable");
        if( !ctx->hwconf.beep_pin ) 
        {
            log_warn("WARNNING: beep hardware not enable and will disable inbreak beep\n");
            ctx->hwconf.inbreak_beep = 0;
        }

        ctx->hwconf.fillin_light = iniparser_getint(ini, "hardware:fillin_light", 0);
        log_nrml("Parser inbreak fill-in light mode [%d]\n", ctx->hwconf.fillin_light);

        if( !ctx->hwconf.relay_pin )
        {
            log_warn("WARNNING: Relay hardware not enable and change fill-in light mode to OFF\n");
            ctx->hwconf.fillin_light = FILLIN_LIGHT_OFF;
        }

        if( !ctx->hwconf.lux )
        {
            log_warn("WARNNING: LUX sensor hardware not enable and change fill-in light mode to ON\n");
            ctx->hwconf.fillin_light = FILLIN_LIGHT_ON;
        }

        ctx->hwconf.light_intval = iniparser_getint(ini, "hardware:light_intval", 20);
        log_nrml("Parser inbreak fill-in light interval time [%d]\n", ctx->hwconf.light_intval);
    }


    /*+------------------------------------------------------+
     *|               parser production ID                   |
     *+------------------------------------------------------+*/

    if( !(str=iniparser_getstring(ini, "common:id", NULL)) )
    {
        log_err("ERROR: Parser production ID failure\n");
        return -2;
    }
    /* cJSON parser ID will get ""  */
    snprintf(ctx->id, sizeof(ctx->id), "\"%s\"", str);
    log_nrml("Parser production ID [%s]\n", ctx->id);


    /*+------------------------------------------------------+
     *|              parser broker settings                  |
     *+------------------------------------------------------+*/

    if( !(str=iniparser_getstring(ini, "broker:hostname", NULL)) )
    {
        log_err("ERROR: Parser broker server hostname failure\n");
        return -2;
    }
    strncpy(ctx->host, str, sizeof(ctx->host) );

    if( (val=iniparser_getint(ini, "broker:port", -1)) < 0 ) 
    {
        log_err("ERROR: Parser broker server port failure\n");
        return -2;
    }
    ctx->port = val;
    log_nrml("Parser broker server [%s:%d]\n", ctx->host, ctx->port);

    str=iniparser_getstring(ini, "broker:username", DEF_BROKER_USERNAME);
    strncpy(ctx->uid, str, sizeof(ctx->uid) );

    str=iniparser_getstring(ini, "broker:password", DEF_BROKER_PASSWD);
    strncpy(ctx->pwd, str, sizeof(ctx->pwd) );

    log_nrml("Parser broker author by [%s:%s]\n", ctx->uid, ctx->pwd);

    ctx->keepalive = iniparser_getint(ini, "broker:keepalive", DEF_BROKER_KEEPALIVE);
    log_nrml("Parser broker keepalive timeout [%d] seconds\n", ctx->keepalive);

    /*+------------------------------------------------------+
     *|             parser publisher settings                |
     *+------------------------------------------------------+*/

    str=iniparser_getstring(ini, "publisher:pubTopic", DEF_PUBTOPIC);
    strncpy(ctx->pubTopic, str, sizeof(ctx->pubTopic) );

    ctx->pubQos = iniparser_getint(ini, "publisher:pubQos", DEF_PUBQOS);
    ctx->interval = iniparser_getint(ini, "publisher:interval", DEF_PUBINTERVAL);
    log_nrml("Parser publisher topic \"%s\" with Qos[%d] interval[%d]\n", ctx->pubTopic, ctx->pubQos, ctx->interval);

    /*+------------------------------------------------------+
     *|             parser subscriber settings               |
     *+------------------------------------------------------+*/

    str=iniparser_getstring(ini, "subsciber:subTopic", DEF_SUBTOPIC);
    strncpy(ctx->subTopic, str, sizeof(ctx->subTopic) );

    ctx->subQos = iniparser_getint(ini, "subsciber:subQos", DEF_SUBQOS);
    log_nrml("Parser subscriber topic \"%s\" with Qos[%d]\n", ctx->subTopic, ctx->subQos);

    return 0;
}